Commit graph

9922 commits

Author SHA1 Message Date
Scott Lahteine afe79ba22b Minor code cleanup 2019-02-04 02:23:06 -06:00
Scott Lahteine fdb97a3e9c Add class and macro to save and auto-restore a variable 2019-02-04 02:23:06 -06:00
Scott Lahteine 433518de74 Prevent M420 error from disconnecting OctoPrint
Just echo the error instead of labeling it `Error:`.
2019-02-04 01:54:43 -06:00
Marcio Teixeira 5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
Psycho 3c88cac2e9 Velleman Vertex Delta pins (#13072) 2019-02-04 00:15:08 -06:00
Nicolas G 6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Scott Lahteine ca1be02bf0 Tweak some pins formatting 2019-02-04 00:06:41 -06:00
Scott Lahteine 38c2ca9281 Clean up trailing whitespace 2019-02-03 23:00:57 -06:00
Mark Zachmann 4d1093b386 Fix init of last_direction_bits (#13067) 2019-02-03 01:29:00 -06:00
Scott Lahteine 4fa1c52688 Tweak serial output code 2019-02-03 01:09:14 -06:00
Scott Lahteine a5e3384691 Pre-apply cosmetic changes to mixing 2019-02-03 01:09:14 -06:00
Scott Lahteine 0358ffcd4c Drop E element from homing_feedrate_mm_s 2019-02-02 15:55:00 -06:00
Scott Lahteine 95223cb28e Remove dead code from stepper.h
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill c3cb449990 TMC2130 dual-stepper Sensorless Homing (#13061) 2019-02-01 18:09:01 -06:00
Marcio Teixeira f6edd2c472 Move stepper settings to "Advanced Settings" menu (#13063) 2019-02-01 18:07:04 -06:00
InsanityAutomation 68bbac207e Update pins_FORMBOT_TREX3.h (#13058) 2019-02-01 18:06:02 -06:00
revilor 6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Scott Lahteine 996f7d1642 Fix I2C_POSITION_ENCODERS commentary 2019-01-30 22:17:17 -06:00
raTmole 988b5aa4e6 Update GT2560 V3 pins (#13036) 2019-01-30 21:10:56 -06:00
InsanityAutomation 7d927b6691 Move Z Probe Z Offset from Advanced to basic Configuration (#13056) 2019-01-30 21:08:36 -06:00
Giuliano Zaro 31e213e427 Always show Tune sub-menu (#13049) 2019-01-30 21:05:55 -06:00
teemuatlut f0503372d9 Revert E_AXIS_N cast (#13055) 2019-01-30 20:55:05 -06:00
InsanityAutomation a1d03fe7ba Fix single nozzle fan (#13038) 2019-01-30 20:54:04 -06:00
Scott Lahteine 159d7eefda New boards entry for the A20M 2019-01-28 21:08:20 -06:00
Scott Lahteine 97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Scott Lahteine 17a8c37148 Label menu edit items 2019-01-28 20:20:46 -06:00
raTmole ddeca7a358 Fix resume from power loss G-Code. (#13035) 2019-01-28 13:19:26 -06:00
Thomas Moore 02ab66fca3 Update Cohesion3D Pins Files (#13027) 2019-01-27 23:11:33 -06:00
Giuliano Zaro a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
jeffstaley 0da636e1a3 Set correct stepper direction on reset (#13032)
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Scott Lahteine 3845baf398 Followup to #12982 2019-01-27 22:53:46 -06:00
InsanityAutomation 48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Scott Lahteine 621fbe99de Followup to #12817 2019-01-27 20:48:58 -06:00
Marcio Teixeira f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
Scott Lahteine aad770bce8 Bring default configs in sync 2019-01-26 16:44:42 -06:00
jeffstaley 3f91233f6d
M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
2019-01-25 07:36:52 -08:00
jeffstaley 0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Jiri 24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
Scott Lahteine 8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bo Herrmannsen 808df82b36 Support for Anycubic I3 (#12972) 2019-01-24 12:40:49 -06:00
Scott Lahteine ae91914260 Prevent name conflicts with mixed stepper drivers 2019-01-24 01:25:28 -06:00
Scott Lahteine 0eca236dcd Fix L6470 config comments 2019-01-24 00:58:16 -06:00
InsanityAutomation f4d1f13358 Warn on cold extrusion, dont error 2019-01-24 00:16:14 -06:00
Scott Lahteine aa74a900f5 Bring Rostock 301 and ArmEd configs up to date 2019-01-23 23:37:37 -06:00
Scott Lahteine 0f07ba4f09 Tweak some comments 2019-01-23 20:18:13 -06:00
Scott Lahteine 00cdd41b5f Clean up for recent changes 2019-01-23 20:08:58 -06:00
Roman Moravčík 7d53b79596 Update Slovak translation (#12991) 2019-01-23 19:48:16 -06:00
Giuliano Zaro 18c32996c1 [2.0.x] Updated Italian language (#12997) 2019-01-23 19:35:42 -06:00
Bob Kuhn 7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 2019-01-23 19:34:39 -06:00
Scott Lahteine b4994ad12e Update language_it.h 2019-01-23 19:28:57 -06:00
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine 6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
Scott Lahteine 48a581ba2e Tweak some HAL Due code 2019-01-23 00:53:20 -06:00
Marcio Teixeira 54fdf57b8c ExtUI: Fix fan wrapping around from 0 to 100 (#12987) 2019-01-22 23:33:10 -06:00
InsanityAutomation dbe4126e07 Update language_en.h (#12988) 2019-01-22 23:32:01 -06:00
teemuatlut e5801b75f8 Fix TMC-related compile issues. (#12971)
- `STEALTHOP_[XYZE]` configuration options now set the default state.
2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 2019-01-20 23:52:51 -06:00
Ludy dc65d96aca Fix TMC compile error (#12965) 2019-01-20 23:47:28 -06:00
InsanityAutomation a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation 75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine e1f951813a Remove old block end comment 2019-01-20 02:30:03 -06:00
Scott Lahteine 52108192d1 Prevent L6470 class name conflict with drivers.h define
Fix #12824
2019-01-20 00:32:56 -06:00
Scott Lahteine 0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
lanserge c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
Scott Lahteine 4e5a915ef8 Fix some Makefile comments 2019-01-19 23:41:30 -06:00
Scott Lahteine a5911765c3 Tweak some spacing 2019-01-19 20:27:57 -06:00
chrisly42 99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 2019-01-19 20:19:14 -06:00
Scott Lahteine 6411680364 Update some pins spacing 2019-01-19 19:21:52 -06:00
teemuatlut 8a3f1d6932 Fix chopper timing struct and initialization (#12943) 2019-01-19 18:57:02 -06:00
Ludy c6991109b7 Update German language (#12953) 2019-01-19 18:50:24 -06:00
Giuliano Zaro ca9eb14f6a Update Italian language (#12951) 2019-01-19 18:48:13 -06:00
Ludy acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine 424aa05cc2 Fix some file endings 2019-01-19 18:19:12 -06:00
Scott Lahteine ce563d7c2e Various general cleanups
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
Scott Lahteine 02cc63d6d4 Update CreatorPro Configuration_adv.h 2019-01-19 16:37:50 -06:00
Marcio Teixeira f4c16e683b Follow up fixes to #12884 (#12940) 2019-01-17 18:48:29 -06:00
Scott Lahteine 712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
Ziemowit 20c20dacb7 MKS SBASE needs DRV8825 (#12911) 2019-01-17 13:21:53 -06:00
Giuliano Zaro 7bb5d4bfe8 Small LED code reorganization (#12929) 2019-01-17 13:20:26 -06:00
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Bob Kuhn d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 2019-01-15 18:59:36 -06:00
Alain Martel cdb562d558 Bring Migbot config up to date (#12916) 2019-01-15 18:53:07 -06:00
Giuliano Zaro 8f4c6e6d1a Fix case light on boot (#12919) 2019-01-15 18:50:56 -06:00
Marcio Teixeira f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
Karl Andersson 64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Ludy 294521439e Clean up Configuration_adv.h (#12900) 2019-01-15 18:42:10 -06:00
InsanityAutomation 59b18aaeef Allow resume from pause with parking enabled (#12893)
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
Giuliano Zaro 85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
mikeshub 7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Scott Lahteine 3644c940bf Tweak SD section of Main Menu 2019-01-13 18:00:07 -06:00
teemuatlut 1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine 7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
Jason dc4786a504 Config files for PowerWASP Printer (#12889) 2019-01-12 16:57:45 -06:00
Scott Lahteine 3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Scott Lahteine eb78aed863
Rename LCD menus according to variable types (#12892) 2019-01-12 16:01:04 -06:00
InsanityAutomation ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
Nils Hasenbanck f9299c4461 Make timer definition in pin files for STM32 possible (#12874)
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine 459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00