zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
4247 commits 1 branch 0 tags 156 MiB
Commit graph

3400 commits

Author SHA1 Message Date
Scott Lahteine 7ea4e095ad Merge pull request #3220 from thinkyhead/rc_tori_spelling 
Patch minor spelling error in cn, en, gl language file headings
 2016-03-23 22:43:11 -07:00
Scott Lahteine bcbac698f2 Patch minor spelling issue in cn, en, gl language file headings 2016-03-23 22:30:07 -07:00
Scott Lahteine 49ed4696ea Merge pull request #3218 from AnHardt/lost-pin-undef 
Fix lost undef Y_MAX_PIN in pins.h
 2016-03-23 21:37:51 -07:00
Scott Lahteine 7112f2e41a Merge pull request #3204 from esenapaj/patch-3 
Change link to the document
 2016-03-23 20:56:52 -07:00
AnHardt 1c6a16d5bb Send position updates to RH 
Send position updates to RH where RH can not know the end position.

For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
 2016-03-23 13:30:50 +01:00
AnHardt 1b336971ae Fix lost undef Y_MAX_PIN in pins.h 2016-03-23 12:48:06 +01:00
AnHardt ba4eebad2f Fix Fan KICKSTART 
Sorting ot what else belongs to what if was not so hard.
But the static `ms = ms = millis();` was a bit surpising.
 2016-03-23 12:08:02 +01:00
Scott Lahteine cbce025248 Merge pull request #3217 from thinkyhead/rc_updated_kana 
Patch-up to commits for Kana #3203.
Closes #3203.
 2016-03-23 02:46:26 -07:00
esenapaj 665338bb69 Update Japanese translation 2016-03-23 02:43:53 -07:00
AnHardt 6486e8b74a Call buzz() directly from M428 2016-03-22 15:05:04 +01:00
jbrazio 757661b299 Toshiba Flash Air Wifi SD card support 2016-03-22 11:42:11 +00:00
esenapaj fc75e6f92d Follow-up the PR #3082, etc 
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
 2016-03-22 20:22:01 +09:00
esenapaj 22299c13c1 Change link to the document 
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757,
but http://www.marlinfirmware.org/ isn't working.
 2016-03-22 19:58:41 +09:00
PheiPheiPhei adb5375a09 Enabling servo usage on boards with PWM current control 
Enabling servo usage on boards with PWM current control
timer5 is used by some boards like the Mini Rambo for controlling motor current via PWM, see stepper.cpp.
```cpp
  #ifdef MOTOR_CURRENT_PWM_XY_PIN
    pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
    pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
    pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
    digipot_current(0, motor_current_setting[0]);
    digipot_current(1, motor_current_setting[1]);
    digipot_current(2, motor_current_setting[2]);
    //Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
    TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
  #endif
}
```
Using the same timer for controlling servos results in loss of motor control. So use timer4/3 for those boards instead.
[See discussion here.](http://shop.prusa3d.com/forum/software-f13/enabling-auto-leveling-in-firmware-t416-s40.html)
 2016-03-22 00:56:31 +01:00
jbrazio 04e57e2b5e Update the Hephestos 2 default config 2016-03-21 18:20:29 +00:00
esenapaj f260e00a72 fix spelling 
Thermister -> Thermistor
 2016-03-21 20:57:03 +09:00
Scott Lahteine b1a3a95ad4 Tweak controllerFan to save a cycle or two 2016-03-20 22:11:09 -07:00
Scott Lahteine 04a6924633 Make DISABLE_INACTIVE_X, etc., the same as DISABLE_X (etc.) if missing 2016-03-20 22:10:52 -07:00
Scott Lahteine 15fccd43ee Fix spacing of an #endif 2016-03-20 20:32:55 -07:00
Scott Lahteine be08eb6153 Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8 
Add pt_pt-utf8 language pack and fix some minor compiler warnings
 2016-03-20 17:42:45 -07:00
Scott Lahteine d1ff7959b7 Merge pull request #3188 from esenapaj/patch-1 
follow-up the commit b82d91e
 2016-03-20 17:39:52 -07:00
Scott Lahteine 10caee2b7c Merge pull request #3187 from AnHardt/target_extruder_number 
Fix extrudernum in MSG_INVALID_EXTRUDER
 2016-03-20 17:15:22 -07:00
Scott Lahteine 1cc316f1fd Merge pull request #3082 from thinkyhead/updated_2820 
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
 2016-03-20 17:10:38 -07:00
Scott Lahteine 7bf5d117e7 Merge pull request #3069 from thinkyhead/rc_delta_compat_m48 
Delta-compatible extensions to M48
 2016-03-20 17:09:18 -07:00
Scott Lahteine db8ab50c66 Merge pull request #3192 from tnw513/fix_lang 
Added missing translations.
 2016-03-20 17:07:00 -07:00
Scott Lahteine 06332f20be Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter 
Stop print timer with M105/M109
 2016-03-20 17:05:07 -07:00
jbrazio 92a7d4515a Missing coma comment correction for the default cofig file 2016-03-20 23:23:11 +00:00
jbrazio 1aa531a3db Missing coma comment correction for all config files 2016-03-20 23:21:45 +00:00
jbrazio 68dda08fff Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs 2016-03-20 23:14:24 +00:00
Silvio Didonna f8c10d6b0e Added missing translations. 2016-03-20 22:34:00 +01:00
esenapaj 468df96b0f follow-up the commit b82d91e 
follow-up the commit b82d91eca6
 2016-03-20 20:57:14 +09:00
AnHardt 338b69c24b Fix extrudernum in MSG_INVALID_EXTRUDER 
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
 2016-03-20 11:39:06 +01:00
AnHardt b39b54031b Fix KEEPALIVE_STATE 
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER

Add Travis test for FILAMENTCHANGEENABLE
 2016-03-20 10:41:56 +01:00
Scott Lahteine 32f75749e4 Merge pull request #3117 from Blue-Marlin/thermal-protection 
Improve the descriptions for THERMAL_PROTECTION
 2016-03-19 23:41:05 -07:00
esenapaj 37eaa1406b follow-up the PR #3180 2016-03-20 15:33:02 +09:00
esenapaj 198d5d56fd follow-up the PR #3183 2016-03-20 13:58:05 +09:00
Scott Lahteine 4119cef32f Merge pull request #3180 from clexpert/RCBugFix 
Czech language specific changes
 2016-03-19 20:18:05 -07:00
Scott Lahteine da94bcfebb Merge pull request #3184 from thinkyhead/fix_command_injection 
Patch drain_queued_commands_P
 2016-03-19 20:12:16 -07:00
Scott Lahteine 41145e6e81 Patch drain_queued_commands_P 
Fix a SNAFU that should have been caught in #3012
 2016-03-19 20:10:41 -07:00
Scott Lahteine 3ce0c5063f Merge pull request #3183 from thinkyhead/rc_lcm1602_support 
Also closes #3181.
 2016-03-19 19:28:50 -07:00
CoderSquirrel eda95d8bed Add support for LCM1602 16x2 I2C LCD adapter 2016-03-19 19:26:44 -07:00
Scott Lahteine 59483221d5 Move stepper DAC to a separate file 2016-03-19 19:24:26 -07:00
Scott Lahteine 5d0570cea0 Make digitalPotWrite depend on HAS_DIGIPOTSS 2016-03-19 19:24:26 -07:00
Scott Lahteine f96bc03081 Add M907-M910 g-codes support for Printrbot Rev. F 2016-03-19 19:24:26 -07:00
Stephanie 6843b78f99 Add support for Printrboard RevF 
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.

The Pins file for the RevF board is included.
 2016-03-19 16:43:37 -07:00
Petr Zahradnik 98392782ea Update Configuration.h 2016-03-19 20:45:13 +01:00
Petr Zahradnik daa52124b0 Update language_cz.h 2016-03-19 20:43:28 +01:00
Blue-Marlin 3166aed087 Improve the descriptions for THERMAL_PROTECTION 2016-03-19 14:08:59 +01:00
Scott Lahteine a02ae36ae8 Include M65 "ABC" parameters in EEPROM 
Addressing #2773
 2016-03-19 05:52:20 -07:00
Scott Lahteine cf7c444aff Apply unknown_position_error elsewhere 2016-03-19 05:13:40 -07:00
Scott Lahteine eda5190581 Check for known position in M48 2016-03-19 05:13:40 -07:00
Scott Lahteine 68085ca855 Updated M48 friendly for DELTA 
Partial implementation with reference to MarlinFirmware/Marlin#3011
 2016-03-19 05:13:40 -07:00
Scott Lahteine 6a3529247f "Homing" as a translatable string 2016-03-19 04:41:03 -07:00
Scott Lahteine c97c2dcaf7 Use const parameters instead of static casting 
Alternative fix to #3149
 2016-03-19 03:36:53 -07:00
Scott Lahteine 38b0082bf2 Additional tweaks to M42 exit conditions 2016-03-19 03:10:18 -07:00
Scott Lahteine 4bbea5124d Support for multiple PWM fans 2016-03-19 03:10:18 -07:00
Scott Lahteine 637cc03686 Fix M109 so it won't wait for cooling 
Addressing issue #2767
 2016-03-19 03:00:58 -07:00
AnHardt 3f45a1acf9 Check probes only when deployed 
Aim: Test probes in update_endstops only when activated

Changes:
Configurations
 Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
 Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
 Add some comments
 Shift some entries to have related things together.

Conditionals.h
 We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.

SanityCheck.h
 Add some tests if the probe is connected and if we have defined a probe.

stepper.cpp
 Changes to test the probe only when it is deployed (z_probe_is_active).
 Test update_endstops() when the probe is deployed.

MarlinMain.cpp
 a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
 b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
 d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.

 To do: In another PR. handle all probes in deploy/stow_z_probe.
 Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
 2016-03-19 02:00:08 -07:00
Scott Lahteine 4634feaeab Merge pull request #3012 from thinkyhead/fix_command_injection 
Use a serial line buffer to prevent queue corruption
 2016-03-19 01:43:54 -07:00
Scott Lahteine 9bf87aac6a Merge pull request #3127 from thinkyhead/rc_core_babystepping 
Implement BABYSTEPPING for COREXY and COREXZ
 2016-03-18 23:25:26 -07:00
Scott Lahteine 4ae03df5c2 Merge pull request #3109 from thinkyhead/rc_host_keepalive 
Provide feedback to hosts when busy
 2016-03-18 23:22:29 -07:00
Scott Lahteine 963a92ceda Patch idle forevermore 2016-03-18 22:38:35 -07:00
Scott Lahteine 7ec7bb31c4 Send a Busy signal to hosts during long processes, wait for input, etc 
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
 2016-03-18 22:38:35 -07:00
esenapaj 8d580ea7e8 follow-up the PR #3114 
follow-up the commit d56c6af24e
 2016-03-19 13:17:34 +09:00
Scott Lahteine d9e1f22682 BABYSTEPPING requires ULTRA_LCD 2016-03-18 18:22:53 -07:00
Scott Lahteine e5fd43f343 Implement BABYSTEPPING for COREXY and COREXZ 2016-03-18 18:22:53 -07:00
Scott Lahteine 80277cc9c8 drain_queued_commands_P now returns true if there are more 2016-03-18 17:56:48 -07:00
Scott Lahteine 8fe7420310 Use a separate serial line buffer 2016-03-18 16:46:20 -07:00
Scott Lahteine 7d25c107a8 Merge pull request #3149 from esenapaj/patch-1 
suppress warnings
 2016-03-18 15:40:14 -07:00
Scott Lahteine d56c6af24e Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu 
Option to reverse the click-wheel direction in menus
 2016-03-18 15:39:29 -07:00
Scott Lahteine cc291aeb3c Move definition of "blink" to main ultralcd file 2016-03-17 18:19:05 -07:00
Scott Lahteine e7e1866589 Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection 
Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
 2016-03-16 12:58:10 -07:00
Scott Lahteine 57e82cacc9 Merge pull request #3156 from esenapaj/patch-3 
Fix CardReader::lsDive()
 2016-03-16 12:48:22 -07:00
Alexander Leisentritt 4338813814 save last extruder and set stepper directions too in case the extruder changed 
fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083
 2016-03-16 20:20:34 +01:00
Scott Lahteine 8f24475e02 Simplify limiting encoderLine in END_MENU 2016-03-16 04:05:41 -07:00
Scott Lahteine fbef2f5b61 Implement reverse menu direction in ultralcd.cpp 2016-03-16 04:03:49 -07:00
Scott Lahteine b8b51d8da8 Add the REVERSE_MENU_DIRECTION option 2016-03-16 04:02:40 -07:00
Scott Lahteine 999a76dbdf Merge pull request #3157 from esenapaj/patch-4 
Use variable in lcd_erase_line()
 2016-03-16 02:46:42 -07:00
Scott Lahteine e8fa843c2d Merge pull request #3164 from epatel/epatel/RCBugFix 
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
 2016-03-16 02:40:54 -07:00
Scott Lahteine fc04b587cf Merge pull request #3147 from thinkyhead/rc_stringify_macro 
Promote STRINGIFY to macros.h
 2016-03-15 17:37:03 -07:00
Scott Lahteine d7c6fd5c2f Merge pull request #3146 from thinkyhead/rc_enabled_true_false 
Support "true" and "false" in the ENABLED macro
 2016-03-15 17:35:55 -07:00
Edward Patel cb0dbfa3b5 Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z 2016-03-16 01:26:00 +01:00
esenapaj a15c5d222a Use variable in lcd_erase_line() 
lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().
 2016-03-16 02:59:06 +09:00
esenapaj 609c0d46d9 Fix CardReader::lsDive() 
If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229),
it makes incorrect result.
 2016-03-16 02:47:58 +09:00
Scott Lahteine 2ef49a9d53 Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT 
Addition to #3140
 2016-03-15 03:49:44 -07:00
Scott Lahteine eb8cf29464 Merge pull request #3151 from hydrocat/RCBugFix 
Uptades the pt-br translation
 2016-03-15 02:46:46 -07:00
Scott Lahteine 6e1bc03d3b Additional wrapping for #3140 2016-03-15 01:18:58 -07:00
Scott Lahteine cc9968f893 Patch spacing in #3140 2016-03-15 01:18:58 -07:00
Scott Lahteine 1c384930f3 Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion 
Wrap macros to prevent bad expansions
 2016-03-15 00:25:34 -07:00
VITORIO MIGUEL PRIETO CILIA de2cca73ac Uptades the pt-br translation 2016-03-14 21:16:57 -03:00
esenapaj a4314c4907 Use local variable in recalc_delta_settings() 
diagonal_rod hadn't been used anywhere.
 2016-03-15 06:47:27 +09:00
esenapaj 8de7a6f9b1 suppress warnings 2016-03-15 06:34:02 +09:00
Scott Lahteine 9418b4f2f3 Promote STRINGIFY to macros.h 2016-03-13 23:15:17 -07:00
Scott Lahteine 4b648793f2 Use ENABLED with DISABLE_[INACTIVE_][XYZ] 2016-03-13 22:15:45 -07:00
Scott Lahteine 73a59a4e45 Allow ENABLED(b) to work with "true" and "false" 2016-03-13 22:15:01 -07:00
Blue-Marlin c73f1b2471 Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed 
Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with
a refined method of 3050.
 2016-03-13 13:59:44 +01:00
Scott Lahteine f4a3efd35e Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug 
Fix value edit click bug
 2016-03-13 04:08:43 -07:00
Scott Lahteine 3f5fbbd398 Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography 
Update the bed topography output done by G29
 2016-03-13 03:51:43 -07:00
Scott Lahteine c16c47954c Merge pull request #3141 from esenapaj2/RCBugFix 
follow-up the PR #3131
 2016-03-13 03:37:39 -07:00
Scott Lahteine 30c3a21d1f Merge pull request #3112 from thinkyhead/rc_support_MAX31855 2016-03-13 03:30:48 -07:00