zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
2731 commits 1 branch 0 tags 156 MiB
Commit graph

425 commits

Author SHA1 Message Date
Scott Lahteine c321c97f35 Merge pull request #1584 from galexander1/stringcleanup 
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
 2015-03-10 01:48:30 -07:00
maverikou 53abc5e2f1 Merge branch 'Development' into delta_auto_bed_level 2015-03-09 22:28:57 +02:00
Mehmet Sutas 956fb2d278 Merge pull request #1 from MarlinFirmware/Development 
update
 2015-03-09 11:05:49 +02:00
Scott Lahteine 624f23f550 Merge pull request #1575 from Wurstnase/fix-controllerFan 
Fix controller fan
 2015-03-08 20:36:38 -07:00
maverikou 424c747fb3 Enable M401 and M402 for deltas with allen key z-probes. 2015-03-08 09:57:38 +02:00
maverikou 0d593ab7c1 Fix debug message 2015-03-08 09:41:31 +02:00
Greg Alexander ed7874b4e0 M404 should not use 'N' address as parameter because 'N' is reserved for the line number 2015-03-07 17:35:06 -05:00
Greg Alexander b9dfa5cad4 use code_value_long() instead of (int)code_value() 2015-03-07 17:33:15 -05:00
Greg Alexander 901b03d020 use strtol() instead of strtod() when an integer value is desired 2015-03-07 17:24:26 -05:00
Mehmet Sutas cfc6a3a87a Filament Runout Sensor Feature 
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.

This feature was requested several times (issue #679), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.

The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
 2015-03-07 22:43:15 +02:00
maverikou 7c24b97958 Ported over Johann Rocholl's improvements for delta printers: 
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
 2015-03-07 20:36:21 +02:00
Wurstnase a5342c942e Update Marlin_main.cpp 2015-03-07 16:47:53 +01:00
Scott Lahteine d085725c86 More sanity-checking for ABL 
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
 2015-03-06 22:14:34 -08:00
Scott Lahteine 254970c92a Merge pull request #1570 from C-o-r-E/escape_fix 
Fixes gCode handling of comments and escaped characters
 2015-03-06 15:09:35 -08:00
Scott Lahteine 25dc79f124 Remove M48 credits also 2015-03-06 14:54:30 -08:00
Scott Lahteine 34e51f576f Fix compile error in gcode_G29 
- A redo of #1576, which missed topo_flag
- Always set verbose_level
 2015-03-06 14:52:05 -08:00
Wurstnase 62bd734612 fix controllerFan() for inverted enable pins 
add ```^ !(n_ENABLE_ON)``` for each stepper
 2015-03-06 12:01:17 +01:00
Gina Häußge 63b62d8d4e Fixed in-line comments and escaping 
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
  * "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.

Tested with the following commands:
    * M117 Hello ; test => displays "Hello" on display, ignores "test"
    * G1 X1 ; foo => moves 1mm in X, ignores "foo"
    * ; test => completely ignored, not even acknowledged
    * M117 Hello \;) => displays "Hello ;)" on display
    * M117 Hello \\;) => displays "Hello \" on display, ignores ")"
 2015-03-05 23:30:34 +01:00
C-o-r-E 99fb1bc3e8 Attempt to resolve #1568 and add basic escape character support 2015-03-05 15:22:37 -05:00
Scott Lahteine cdc38aa783 Move gcode handlers into inline functions 2015-03-05 04:27:24 -08:00
Scott Lahteine 6d9e9a6bef Merge branch 'Development' into enhanced_g29 
Latest upstream changes
 2015-03-05 02:49:18 -08:00
Scott Lahteine 4db2179f5c Include 4th extruder support 2015-03-05 02:37:36 -08:00
OhmEye f90a947e65 Fix autoretract 
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
 2015-03-04 20:28:08 -10:00
Scott Lahteine 2ef6b3d57a Fix wrong defines, broken syntax 2015-03-04 22:24:44 -08:00
Scott Lahteine 32744d41a9 Do sanity checking on LRFB values 
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
 2015-03-04 21:32:11 -08:00
domonoky 075507fb9a missed one X_ENABLE_PIN 2015-03-03 11:09:56 +01:00
Scott Lahteine dfb38874f8 Some suggested changes for #1555 2015-03-03 00:48:20 -08:00
Scott Lahteine 7f8ea7105f Arrange ProbeAction values bitwise 2015-03-02 20:14:37 -08:00
Scott Lahteine 7684721977 Enhanced G29 
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
  - `V` sets the verbose level for serial out
  - `T` (or `V` > 2) send a Topology report to serial out
  - `E` works the same way as before
  - `P` works as before (source used `n` or `U`/`u`)
  - `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
 2015-03-02 20:00:17 -08:00
C-o-r-E 874d3d3fc5 Add support for solenoid articulated extruders 2015-03-02 20:07:12 -05:00
domonoky 4a7aca2736 Merge remote-tracking branch 'remotes/upstream/Development' into Development 2015-03-02 17:52:12 +01:00
Scott Lahteine e30bfedce4 Fix undefined *_PROBE_BED_POSITION error 2015-03-01 19:57:35 -08:00
alexborro 227ab8c665 Merge pull request #1503 from MarcelMo/patch-2 
Support for simple customisable AutoZProbing area
 2015-02-25 13:22:42 -03:00
Scott Lahteine c9a3eb0c1a Spacing in calculate_volumetric_multiplier(s) 2015-02-23 20:35:18 -08:00
Scott Lahteine 0cf0c20532 Optimize calculate_volumetric_multiplier 2015-02-23 18:10:35 -08:00
domonoky b55995aae8 Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation. 2015-02-23 16:12:35 +01:00
Scott Lahteine 08c236059e Merge pull request #1505 from thinkyhead/issue_1499 
Bed leveling probe behavior issue?
 2015-02-19 01:24:17 -08:00
MagoKimbra 159196d1e9 Reset Alert message when finish M600 command 2015-02-18 21:33:38 +01:00
Scott Lahteine 978d114c73 Bed leveling probe behavior issue? 
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
 2015-02-15 20:51:27 -08:00
MarcelMo d28f5b9e82 Support for simple customisable AutoZProbing area 
When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size).
Not much code, but very useful.
Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling.
I used int for values... might be wrong...
I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits)
 2015-02-15 15:58:29 +01:00
Scott Lahteine 7866fa161f Merge pull request #1476 from Natealus/Development 
Compiling errors with 4 Extruders defined and Viki 2 Implementation
 2015-02-12 16:56:55 -08:00
Jérémie FRANCOIS 9d75a56b56 Merge remote-tracking branch 'upstream/Development' into Development 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2015-02-11 06:38:36 +01:00
Natealus 38a500d05c Viki 2 Implementation 
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.

I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
 2015-02-08 03:14:59 -07:00
Jérémie FRANCOIS 85e5aa4011 Generalized enqueue_commands_P, and moved them to Marlin_main as they should 2015-02-07 23:24:20 +01:00
Scott Lahteine 0cb1029311 remove extra plan_buffer_line 2015-02-03 11:26:36 -08:00
Scott Lahteine b97a950f53 Apply fix for M600 filament change 
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
 2015-02-03 09:57:16 -08:00
Scott Lahteine 9dc5de6166 Hide code that makes veteran geeks go "aha!" 2015-02-02 05:55:55 -08:00
Scott Lahteine bd387068bb Apply loops for extruders elsewhere also 2015-02-02 05:27:27 -08:00
Scott Lahteine 4a146d584b Loop, since the pending feature can use an array 2015-02-02 05:16:17 -08:00
Scott Lahteine bca884bf72 Realized it's not a bug, but cleanup code anyway 2015-02-02 04:41:31 -08:00
Philip Schell fb7c636ecf Avoid compiling error 
Only a missing ","... now it will compile again
 2015-02-01 01:33:04 +01:00
Scott Lahteine 073c59c50a Clean up some formatting 
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
 2015-01-29 18:52:21 -08:00
Scott Lahteine 093fedfde8 Make EEPROM storage consistent 
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
 2015-01-28 01:08:48 -08:00
Jérémie FRANCOIS dd301be52d Added suport for multiline G-code commands in the LCD menus 2015-01-26 18:50:29 +01:00
AnHardt 59315330dd Remove definition of VERSION_STRING and replace where usend with STRING_VERSION 2015-01-26 15:52:01 +01:00
MagoKimbra 986e723eeb Add 4th extruder 2015-01-24 13:37:58 +01:00
daid 53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
Bo Herrmannsen 5151db5c2f Merge pull request #1349 from msutas/patch-2 
Improvement - G29 Option for Not Retracting Servo
 2015-01-15 10:56:31 +01:00
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid 
Independent PID parameters for each extruder
 2015-01-13 12:10:37 +01:00
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development 
Reduce PROGMEM warnings
 2015-01-13 11:26:50 +01:00
msutas 3a5a6f42fb Corrected the ABL grid option 
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
 2015-01-12 11:07:46 +02:00
odewdney 538859669d Removing compiler warnings for progmem 2015-01-11 18:14:21 +00:00
grob6000 bf2c923db5 Make multiple PID parameters a config option 
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
 2015-01-11 13:50:17 +11:00
msutas e0beb98fd3 Improvement - G29 Option for Not Retracting Servo 
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
 2015-01-10 17:25:39 +02:00
grob6000 37c7e8300f Independent PID parameters for each extruder 
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
 2015-01-10 16:35:12 +11:00
Erik van der Zalm 1aade4a8e2 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development 2015-01-09 21:33:29 +01:00
Erik van der Zalm 8a2e84e3f1 Possible fix for FWRETRACT with 0 zlift. 2015-01-09 21:33:02 +01:00
Erik van der Zalm 3a30d45c2e Revert "issue 968 for dev branch" 2015-01-07 23:40:17 +01:00
Dan Royer 9472bbe51d issue 968 for dev branch 
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
 2015-01-04 12:17:46 -08:00
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development 
Add Filament menu and add Filament/Retract settings to config store.
 2015-01-02 15:35:29 +01:00
bkubicek d02daec08f fixed compilation 2014-12-30 08:04:06 +01:00
Bernhard Kubicek f24c5d82e3 Update Marlin_main.cpp 
fixed minor typo
 2014-12-29 17:17:30 +01:00
Wurstnase 8a6f098cc6 Expand manage_inactivity #1264 
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
 2014-12-29 17:07:22 +01:00
Wurstnase d1995aec7a Rename ignore_blocks_queued 
more speaking name
 2014-12-29 16:47:08 +01:00
Wurstnase 4122de9d17 change filament issue 
make a more general solution
 2014-12-29 16:31:00 +01:00
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development 
Tested for SAV MKI and SAV 3D LCD on lewihe.
 2014-12-28 19:54:06 +01:00
alexborro 3afe66bb0c Fix issues #1248, #1240 
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
 2014-12-28 13:27:39 -02:00
Lukas Obermann 9eb6df17a7 Consider negative Z Offsets when auto bed leveling is active 2014-12-28 12:46:35 +01:00
Denis Chertykov 050ca9ca13 Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp 2014-12-28 09:09:42 +03:00
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
Bo Herrmannsen 60628864ca Merge pull request #1167 from thinkyhead/sd_freemem 
Use SdFatUtil::FreeRam() for freeMemory() if there
 2014-12-20 18:31:21 +01:00
Bo Herrmannsen 889d7ba218 Merge pull request #1177 from martin-pr/probing_z_speed 
Split do_blocking_move() to XY and Z sections
 2014-12-20 18:30:35 +01:00
Bo Herrmannsen 5e7bd2dc87 Merge pull request #1200 from chertykov/Marlin_v1 
Fix syntax errors in #ifdef
 2014-12-20 18:29:39 +01:00
Denis Chertykov b086394178 Fix syntax errors in #ifdef. 2014-12-20 19:33:43 +03:00
John Davis 4315c2547a Update Marlin_main.cpp 
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
 2014-12-19 17:41:29 -05:00
Bo Herrmannsen 03e489aaad Merge pull request #1197 from foosel/fix/issue_1147 
Fixes commands not being acknowledged in the same order they are received in
 2014-12-19 14:39:05 +01:00
Gina Häußge acc0e75279 Fixes commands not being acknowledged in the same order they are received 
in

G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.

This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.

Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.

Fixes ErikZalm/Marlin#1147
 2014-12-19 14:20:36 +01:00
Scott Lahteine 07c6b5ab71 Using axis constants 2014-12-18 08:13:08 -08:00
Scott Lahteine 0450e83fa5 Use SdFatUtil::FreeRam() for freeMemory() if there 2014-12-17 23:26:52 -08:00
Scott Lahteine 60598b4cdd A few constants where they belong 2014-12-17 23:01:24 -08:00
Martin Prazak 2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 2014-12-07 15:31:46 +00:00
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-12-04 21:09:03 +00:00
Scott Lahteine 7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine d12b24758a Clear LCD to welcome_msg if not printing 
The welcome message is more appropriate than “resuming print” if
nothing is printing.
 2014-11-26 21:05:11 -08:00
Scott Lahteine 92e21d3ee2 M0-M1 Enhancements 
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
 2014-11-26 21:05:10 -08:00
Neil Darlow b81021f475 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-21 12:06:56 +01:00
Erik van der Zalm 058e446531 Merge pull request #1037 from filipmu/Filament-Sensor 
Support for a filament diameter sensor
 2014-10-11 22:56:01 +02:00
Erik van der Zalm b360306881 Merge pull request #1073 from WingTangWong/wing-fix-float-delta 
Wing fix float delta
 2014-10-06 13:41:01 +02:00
Scott Lahteine f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Neil Darlow 6c5a460e65 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-05 12:54:54 +01:00
galexander1 cb4a6dd2dc Merge pull request #1065 from oliasmage/Marlin_v1 
Corrected retract() call for use of auto probe without sled enabled.
 2014-09-19 15:12:09 -04:00
Bracken Dawson 01e9b536cb Fix build for non-sled bed auto levelling 
This function should only be used with sled, not all bed auto
levelling.
 2014-09-19 19:42:32 +01:00
Wing Tang Wong 58eabd21fb Added ifndef 2014-09-16 14:31:58 -07:00
Wing Tang Wong 88d12a762a Added #ifndef DELTA wrapper to float delta 2014-09-16 14:29:44 -07:00
Charles Bell 3b8216bdd1 Corrected #endif and ifdef for Z_PROBE_SLED code. 2014-09-04 16:40:22 -04:00
Charles Bell 37799f70ba Corrected retract() call for use of auto probe without sled enabled. 2014-09-04 14:36:39 -04:00
Neil Darlow 1632e5e38a Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-09-04 12:21:35 +01:00
Erik van der Zalm 018b68a5c4 Merge pull request #976 from cocktailyogi/SCARA_by_Yogi 
Implemented SCARA-Maths
 2014-08-28 16:32:52 +02:00
Erik van der Zalm 9887555192 Merge pull request #998 from darconeous/pull-requests/fwretract 
FWRETRACT fixes
 2014-08-28 16:24:51 +02:00
Erik van der Zalm 68dd5e635e Merge pull request #1024 from oliasmage/Marlin_v1 
Adding Z Probe via sled mounted endstop
 2014-08-28 16:15:54 +02:00
Erik van der Zalm 25069ed4e9 Merge pull request #1031 from Roxy-3DPrintBoard/Z_PROBE_REPEATABILITY-with-correct-Defaults 
Z probe repeatability with correct defaults
 2014-08-28 16:14:10 +02:00
Filip Mulier 62db9848d3 Improvements and bug fixes in sensor delay buffer for filament sensor code 
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision.  Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
 2014-08-16 06:50:13 -05:00
Florian Baumann 5908fd5cec Fix reseting CHDK pin to LOW 
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.

Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
 2014-08-11 14:12:32 +02:00
Roxy-3DPrintBoard 0091865583 Z_PROBE_REPEATABILITY test 
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
 2014-08-09 15:37:23 -05:00
Filip Mulier 85649a4549 Real-time filament diameter measurement and control 
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
 2014-08-06 19:30:57 -05:00
Charles Bell d2fcb3ee56 CAB: Added code for Z-probe with Z endstop mounted on a sled. 2014-08-01 11:29:59 -04:00
Neil Darlow 3cd7dbcc45 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-30 13:01:52 +01:00
daid c13a831ea1 Merge pull request #1017 from foosel/fix/checksum_truncation_bug 
Fix for a wrong checksum truncation for certain commands
 2014-07-24 19:41:34 +02:00
Gina Häußge 2d22902d08 Fix for a wrong checksum truncation for certain commands 
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.

In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.

In case of M117 this caused the last given letter not to be displayed.

This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
 2014-07-24 12:04:02 +02:00
cocktailyogi 2f4a20257c imported last Marlin changes 2014-07-20 13:49:26 +02:00
daid aacff0d361 Merge pull request #948 from Dim3nsioneer/Marlin_v1 
Implementation of FW extruder change retract
 2014-07-18 16:10:15 +02:00
Robert Quattlebaum 1fd9a7d476 Fix for FWRETRACT on DELTA printers. 
Fixes #817
 2014-07-09 09:24:26 -07:00
Neil Darlow 3f2c771d90 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-07 18:17:15 +01:00
Pablo Clemente 2242a84218 Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965 2014-07-01 16:45:03 +02:00
Neil Darlow 6e3406d228 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-01 10:27:39 +01:00
Pablo Clemente d86c3cf43c Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too. 2014-06-30 15:12:13 +02:00
cocktailyogi f0cab611db optimised some math-code 2014-06-24 18:43:36 +02:00
cocktailyogi fae7d08698 fixed wrong compiler-option 2014-06-23 18:16:42 +02:00
cocktailyogi 512f2a3136 restore Branch from Backup 
sorry for that
 2014-06-23 17:09:57 +02:00
Pablo Clemente cd3220d055 Inverted state logic for forced_heating_stop variable 2014-06-13 08:39:58 +02:00
Pablo Clemente 86b4b805d2 Fixed stop print LCD function on M104 2014-06-12 18:43:16 +02:00
Dim3nsioneer 3c927901a4 Implementation of FW extruder change retract 
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
 2014-06-02 17:02:10 +02:00
neildarlow efb6d61413 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-24 13:08:58 +01:00
nothinman 38192cb5f3 Add M112 description to Marlin_main 2014-05-20 15:20:19 +01:00
nothinman aed5ec008a Merge pull request #851 from DanNixon/estop 
Implemented M112
 2014-05-19 17:55:34 +01:00
Erik van der Zalm cfb98ef682 More coverity fixes 2014-05-15 22:09:50 +02:00
Erik van der Zalm 9db9842aea Fixed error found by the free coverity tool (https://scan.coverity.com/) 
===================================================
Hi,

Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.

Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)

** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()

** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()

** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()

** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()

** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()

** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()

** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()

** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()

** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()

** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()

** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()

** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()

** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

________________________________________________________________________________________________________
*** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148                 }
2149               #endif
2150             }
2151           }
2152           break;
2153         case 85: // M85
   CID 59629:  Unchecked return value  (CHECKED_RETURN)
   Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154           code_seen('S');
2155           max_inactive_time = code_value() * 1000;
2156           break;
2157         case 92: // M92
2158           for(int8_t i=0; i < NUM_AXIS; i++)
2159           {

________________________________________________________________________________________________________
*** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313         else
314         {
315           // two choices for the 16 bit timers: ck/1 or ck/64
316           ocr = F_CPU / frequency / 2 - 1;
317
318           prescalarbits = 0b001;
   CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
   "ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319           if (ocr > 0xffff)
320           {
321             ocr = F_CPU / frequency / 2 / 64 - 1;
322             prescalarbits = 0b011;
323           }
324

________________________________________________________________________________________________________
*** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181         case 2: // G2  - CW ARC
1182           if(Stopped == false) {
1183             get_arc_coordinates();
1184             prepare_arc_move(true);
1185             return;
1186           }
   CID 59631:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }

________________________________________________________________________________________________________
*** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }
   CID 59632:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1193         case 4: // G4 dwell
1194           LCD_MESSAGEPGM(MSG_DWELL);
1195           codenum = 0;
1196           if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197           if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198

________________________________________________________________________________________________________
*** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913         target_temperature[1]=0;
   CID 59633:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif
919

________________________________________________________________________________________________________
*** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907        #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
   CID 59634:  Out-of-bounds write  (OVERRUN)
   Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913         target_temperature[1]=0;
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif

________________________________________________________________________________________________________
*** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
   CID 59635:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626         for (i=1; i<heater_ttbllen_map[e]; i++)
627         {
628           if (PGM_RD_W((*tt)[i][0]) > raw)
629           {
630             celsius = PGM_RD_W((*tt)[i-1][1]) +
631               (raw - PGM_RD_W((*tt)[i-1][0])) *

________________________________________________________________________________________________________
*** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614         if (e == 0)
615         {
616           return 0.25 * raw;
617         }
618       #endif
619
   CID 59636:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625

________________________________________________________________________________________________________
*** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196       {
197          soft_pwm_bed = (MAX_BED_POWER)/2;
198          bias = d = (MAX_BED_POWER)/2;
199        }
200        else
201        {
   CID 59637:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202          soft_pwm[extruder] = (PID_MAX)/2;
203          bias = d = (PID_MAX)/2;
204       }
205
206
207

________________________________________________________________________________________________________
*** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209      for(;;) {
210
211         if(temp_meas_ready == true) { // temp sample ready
212           updateTemperaturesFromRawValues();
213
   CID 59638:  Out-of-bounds read  (OVERRUN)
   Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214           input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216           max=max(max,input);
217           min=min(min,input);
218           if(heating == true && input > temp) {
219             if(millis() - t2 > 5000) {

________________________________________________________________________________________________________
*** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272               tmp_extruder = code_value();
2273               if(tmp_extruder >= EXTRUDERS) {
2274                 SERIAL_ECHO_START;
2275                 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276               }
2277             }
   CID 59639:  Out-of-bounds write  (OVERRUN)
   Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278             volumetric_multiplier[tmp_extruder] = 1 / area;
2279           }
2280           break;
2281         case 201: // M201
2282           for(int8_t i=0; i < NUM_AXIS; i++)
2283           {

________________________________________________________________________________________________________
*** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796             int pin_status = code_value();
1797             int pin_number = LED_PIN;
1798             if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799               pin_number = code_value();
1800             for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801             {
   CID 59640:  Out-of-bounds read  (OVERRUN)
   Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802               if (sensitive_pins[i] == pin_number)
1803               {
1804                 pin_number = -1;
1805                 break;
1806               }
1807             }

________________________________________________________________________________________________________
*** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51     }
52
53     void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54     			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55     			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56     {

________________________________________________________________________________________________________
*** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39     }
40
41     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43     {
44       init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);

________________________________________________________________________________________________________
*** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30     {
31       init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
   CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32     }
33
34     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37     {

________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
 2014-05-14 21:59:48 +02:00
Neil Darlow e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
MyMakibox 21ec6b88c3 Update Marlin_main.cpp 
Added description of autotemp flags to M109
 2014-04-23 17:33:26 +08:00
Neil Darlow 6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-21 15:10:57 +01:00
whosawhatsis 27d544ac25 Speed up QUICK_HOME feedrate for diagonal move 
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
 2014-04-19 17:29:20 -07:00
neildarlow 95ad6ec9a1 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-12 22:20:45 +01:00
Gabe Rosenhouse 27a7cf9fcf use existing strings 2014-04-07 05:01:48 -05:00
Gabe Rosenhouse b0aeac117f Adjustable Z probe offset, via custom M-code 2014-04-06 19:45:56 -05:00
Neil Darlow 73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-06 19:15:29 +01:00
nothinman c23376f2e7 Merge pull request #837 from whosawhatsis/fwretract 
FWRETRACT in mm/s
 2014-04-04 11:47:58 +01:00
nothinman 9a5d23d96f Merge pull request #866 from sakunamary/Marlin_v1 
fix bug for dual extruders not working
 2014-04-02 18:27:42 +01:00
nothinman 303ee67896 Merge pull request #864 from whosawhatsis/M200 
fix bug in M200 with multiple extruders
 2014-04-02 18:26:15 +01:00