Michael Moon
71dc82e0b4
my local configuration
2012-01-24 13:19:37 +11:00
Michael Moon
5aadc2f5ca
cardreader needs to include some other files
2012-01-24 13:19:24 +11:00
Michael Moon
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
2012-01-24 13:18:54 +11:00
Bernhard
157aa7f2fd
m115 eol fix
2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d
small mistake
2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
2012-01-15 17:06:10 +01:00
Bernhard
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
Bernhard
729cde4475
fix autostart failure if in wrong directory
2011-12-26 09:20:53 +01:00
Bernhard
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
2011-12-26 09:20:21 +01:00
Bernhard
11f2dafc4e
one step closer to a functional makefile..
2011-12-22 16:43:28 +01:00
Bernhard
8463e39a4a
starting with sanguino arduino 1.0 compatibility
2011-12-22 16:11:15 +01:00
Bernhard
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
2011-12-22 14:57:28 +01:00
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Bernhard
212515148e
added m240 photography support. default off
2011-12-22 12:11:39 +01:00
Bernhard
6735025428
cooldown
2011-12-22 12:02:33 +01:00
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
2011-12-22 11:45:52 +01:00
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76
G92 fix
2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
3320a5b37d
make autotemp compatile for use without pid
2011-12-11 22:25:52 +01:00
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
2011-12-11 22:18:50 +01:00
Bernhard
82c99625fa
instant stop of sd prints from the panel.
2011-12-11 22:10:06 +01:00
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
2011-12-11 15:42:56 +01:00
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
2011-12-09 17:07:44 +01:00
Bernhard
b1d84d879b
st_synchronize back to normal..
2011-12-09 16:13:58 +01:00
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9
disable steppers in runout prevention
2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474
better values.
2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a
extruder runout prevention.
2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
2011-12-09 12:51:08 +01:00
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
2011-12-09 12:33:00 +01:00
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
2011-12-09 12:32:31 +01:00
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-08 12:25:32 +02:00
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
2011-12-07 23:08:13 +01:00
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
2011-12-07 20:56:47 +01:00
Bernhard
460b788d78
repaired homing position setting.
2011-12-07 20:54:34 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-12-04 22:27:37 +01:00
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
2011-12-04 22:26:42 +01:00
Erik van der Zalm
89e832c295
Update endstops only for homing. (use less resources when not used)
2011-12-04 21:03:02 +01:00
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
2011-12-04 20:17:21 +01:00
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
2011-12-04 19:54:43 +01:00
Erik van der Zalm
af22e9cd38
Some advance modifications
2011-12-04 19:54:07 +01:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
2011-12-04 09:48:53 +01:00
Bernhard
4f909963e4
make QUICKHOME configureable
2011-12-04 09:02:09 +01:00
