zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
10850 commits 1 branch 0 tags 156 MiB
Commit graph

9076 commits

Author SHA1 Message Date
Scott Lahteine 97f6396b25 Fix RE_ARM LCD pins to avoid #undef 2018-08-21 12:47:40 -05:00
Scott Lahteine 0e25f66c09 Fix Ultimaker servo pin 
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
 2018-08-21 11:39:53 -05:00
Scott Lahteine ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 2018-08-21 09:47:57 -05:00
Scott Alfter b5537dde7f need to add E2END to pins_RAMPS_FD_V2.h (#11564) 2018-08-21 02:16:31 -05:00
Scott Lahteine 8f0bbdcc9b
Fix up Max7219 orientations (#11596) 2018-08-21 02:06:18 -05:00
jmz52 a77f8c6dd5 Implement servo support for STM32F1 (#11580) 
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
 2018-08-20 21:13:51 -05:00
Dave Johnson 0456caf0ad Consolidate shared HALs and isolate HAL compile (#11552) 2018-08-20 21:11:12 -05:00
jmz52 dfe18ac633 Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583) 
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
 2018-08-20 20:37:56 -05:00
Roxy-3D b0a8ce59bd
Update Boards.h to include Formbot support 2018-08-20 16:46:27 -05:00
Roxy-3D 62ce937540
Update pins.h to include the Formbot board 2018-08-20 16:44:54 -05:00
Roxy-3D a82be36d5d
Create pins_FORMBOT.h 2018-08-20 16:43:42 -05:00
ghent360 00d24a8219 Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586) 2018-08-18 22:50:11 -05:00
Scott Lahteine 56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend (#11575) 2018-08-18 01:33:13 -05:00
jmz52 0b2d686160 Fix "SD init fail" problem for STM32F1 (#11579) 
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
 2018-08-17 23:27:10 -05:00
Scott Lahteine a98f21ec5e Marlin assumes signed chars 2018-08-16 22:52:42 -05:00
Kevin db30650731 Fix UBL/Homing (#11566) 2018-08-16 08:28:40 -05:00
Roxy-3D aae4c67e5d
Max7219 Clean Up (#11563) 
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now.   But if not...  It is much closer to being correct.
 2018-08-15 21:22:28 -05:00
InsanityAutomation 9de730b2bf Update tool_change.cpp (#11559) 2018-08-15 19:30:52 -05:00
InsanityAutomation c2553f9888 2.0.x - Idex match119 (#11556) 
* Update ubl_G29.cpp

* Update ultralcd.cpp
 2018-08-15 13:26:11 -05:00
Roxy-3D e9de321ac0
declare void Max7219_register_setup(); 2018-08-15 10:36:51 -05:00
Scott Lahteine 952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes 
[2.0.x] Fix TMC2208 SW serial communication
 2018-08-14 19:07:08 -05:00
petrzjunior 67613bf5bd Update Czech translations (#11510) 2018-08-14 18:45:16 -05:00
Scott Lahteine bd6d032628 Update default driver configuration 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:42:04 -05:00
Scott Lahteine 1561e61df7 New TMC2208 constructor 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:41:51 -05:00
Nils Hasenbanck b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Chris Pepper 5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Scott Lahteine 846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Scott Lahteine 834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
Dave Johnson c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Andy Shaw 5be2559eda Use flash memory to emulate EEPROM (#11500) 
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
 2018-08-14 01:19:34 -05:00
Scott Lahteine 6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00
Scott Lahteine 865ee5985f Followup persistent store with heading, const 2018-08-13 23:55:33 -05:00
Scott Lahteine a4b0148365 Easier to find 'static inline' 2018-08-13 23:55:33 -05:00
Scott Lahteine cc0a60453f
Merge pull request #11526 from hasenbanck/eeprom-cleanup 
[2.0.x] Change direct eeprom access to HAL::PersistentStore
 2018-08-13 19:45:10 -05:00
Roxy-3D 65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern 2018-08-13 17:46:48 -05:00
Nils Hasenbanck 577aeb4aa9 All EEPROM access uses persistentStore 2018-08-13 17:43:35 -05:00
Scott Lahteine 6a8b906318 Followup for persistent_store_api.h 2018-08-13 17:43:35 -05:00
Chris Pepper 66d2b48b59 Update PersistentStore api (#11538) 
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
 2018-08-13 17:30:25 -05:00
Roxy-3D 60f1376798
Make M7219 I more robust and nice to look at 
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
 2018-08-13 16:59:25 -05:00
Roxy-3D fd15b1495a add I parameter to M42 to allow access to sensitive pins 2018-08-13 16:57:09 -05:00
Scott Lahteine 11b411a872 Improve AXIS_DRIVER_TYPE macros 2018-08-13 16:57:09 -05:00
Scott Lahteine f1347f783d Optimize thermistor table 71 
agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.

Co-Authored-By: Aaron Griffith <aargri@gmail.com>
 2018-08-13 02:54:55 -05:00
Scott Lahteine 0bda22367b Allow Einsy RAMBo FAN1_PIN override 2018-08-13 02:49:30 -05:00
Scott Lahteine 1b921b246b Fix pca9632_set_led_color 
…when used with an I2C screen.

Co-Authored-By: soimy <soimy@163.com>
 2018-08-13 02:40:22 -05:00
Scott Lahteine aa9d329560 Reduce max accel in Creality configs 2018-08-11 22:56:51 -05:00
Scott Lahteine c93538e9f3 UBL/planner patch tweaks 2018-08-11 22:50:45 -05:00
Scott Lahteine 0af22549a6 Allow G33 to compile with no LCD 2018-08-11 22:32:09 -05:00
Thomas Moore fc55f1da01 Account for UBL correction when setting the planner position (#11486) 2018-08-10 13:00:50 -05:00
Scott Lahteine b328fb4dc9
Treat TMC2660 like non-TMC (#11508) 2018-08-10 00:30:28 -05:00
Scott Lahteine 72b086b90d Add A5984 to example configurations 2018-08-09 23:04:27 -05:00
Greg Nutt a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine f891416e70 No raise on G28 after power-loss 2018-08-07 13:51:36 -05:00
Scott Lahteine e4ecade8d4 Fix AUTO_POWER_CONTROL compile error 
Counterpart to #11467

Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
 2018-08-06 23:20:51 -05:00
Giuliano eee1b7c50c [2.0.x] Fix compile error (#11465) 
Address #11463
 2018-08-06 23:14:53 -05:00
Giuliano e85feb2545 [2.0.x] Better timing handling (#11461) 2018-08-06 23:13:36 -05:00
Scott Lahteine 79835590e3
Easier to disable homing validation (#11458) 2018-08-06 23:11:37 -05:00
Scott Lahteine 131d216afa
Fix drivers.h dependency, defer macro evaluation (#11450) 2018-08-03 21:49:04 -05:00
Scott Lahteine 9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
Scott Lahteine 9bae413901
Add Bigtreetech/BIQU KFB 2.0 board (#11446) 2018-08-03 18:14:26 -05:00
Marcio Teixeira f2224755ad Fix jumping progress bar. (#11439) 
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:17:02 -05:00
Scott Lahteine aae02827c0 Cosmetic pins changes 2018-08-03 17:03:19 -05:00
Scott Lahteine 64c493ad82 MKS_12864_OLED code cleanup 2018-07-30 23:22:40 -05:00
Scott Lahteine b826bf4194
Fix initial safe_speed in jerk code (#11417) 2018-07-30 22:50:08 -05:00
forkoz 2cc950d67e [2.0.x] MKS SBASE Trinamic examples/support (#11402) 2018-07-30 22:48:58 -05:00
Roxy-3D 16432376ab
Revert "[2.0.x]Idex and bl touch fixes" (#11407) 
* Revert "[2.0.x] bltouch home refinements (#11397)"

This reverts commit 74900f7a70.

* Revert "[2.0.x]Idex and bl touch fixes (#11395)"

This reverts commit 6dafb90c01.
 2018-07-28 23:14:46 -05:00
Giuliano 74900f7a70 [2.0.x] bltouch home refinements (#11397) 
Just create  a better functions call logic flow
 2018-07-28 19:30:14 -05:00
silentninja1 6dafb90c01 [2.0.x]Idex and bl touch fixes (#11395) 
* Fix BLTouch homing

Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0

* Update tool_change.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Change brackets to be more in align of Marlin coding standards
 2018-07-28 10:33:31 -05:00
Giuliano 5ce5ff8e9b [2.0.x] fix bltouch homing (#11379) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:30:08 -05:00
Scott Lahteine 15d68cb496 Pre-override of ST7920 delays before HAL.h 2018-07-26 23:33:18 -05:00
Dave Johnson 8a24ff94d1 AT90USB1286 PIO cleanup and optimization (#11230) 
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
 2018-07-26 05:58:28 -05:00
Lee Olivares 094e6d81a5 Add Einstart-S support (#11219) 
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
 2018-07-26 05:52:22 -05:00
Scott Lahteine 244b9a8257 Better fastio 1280/2560 pin list 
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
 2018-07-26 05:23:51 -05:00
Scott Lahteine 955a7f0ae9
Improve driver.h macros (#11371) 2018-07-26 05:11:22 -05:00
MikeLud aadcf08913 [2.0.x] add Calibrate Z (M915) to Prepare Menu (#11331) 2018-07-26 05:09:49 -05:00
Giuliano 4237c3d9f8 [2.0.x] different bltouch init (#11135) 2018-07-26 05:04:09 -05:00
Andy Shaw 624986d423 Ensure ADC conversion is complete before reading (#11336) 
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
 2018-07-26 03:59:19 -05:00
Scott Lahteine e2aa635e70 Fix Anet A6 thermistors 
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
 2018-07-26 02:02:27 -05:00
Bo Herrmannsen 67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 2018-07-25 19:32:27 -05:00
forkoz d1c6687ecd Update MKS sBase pins (#11357) 2018-07-25 19:19:09 -05:00
Scott Lahteine 048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments 
[2.0.x] Tweak some SoftPWM code
 2018-07-25 19:02:28 -05:00
Scott Lahteine e05e95cf97 Clean trailing whitespace 2018-07-25 18:49:47 -05:00
Scott Lahteine 22ebbc091f Tweak some SoftPWM code 2018-07-25 18:09:31 -05:00
Scott Lahteine 32de09f5c5 Specify some extra CR-10S pins 2018-07-25 18:08:09 -05:00
J.C. Nelson 9c2bfa2ab3 Remove extra parameter to enqueue. (#11364) 2018-07-25 18:02:02 -05:00
Giuliano bd3ec66a78 [2.0.x] typo fix (#11365) 
Typo fix
 2018-07-25 18:00:47 -05:00
teemuatlut fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine e5c0b490c8 Add *_DRIVER_TYPE to example configs 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-07-25 02:47:30 -05:00
Eyal fbdbe53290 Fix get_period_inverse(0) so it doesn't crash (#11334) 2018-07-25 01:58:40 -05:00
Scott Lahteine 14e2b11195 Fix spelling in configs 2018-07-24 21:03:38 -05:00
Scott Lahteine 4685c7d59f Followup to M91x I patch 2018-07-24 18:30:28 -05:00
Roxy-3D 62fa028155
Handle dual gantry machines better 2018-07-24 15:34:53 -05:00
Roxy-3D 09485f63e9
add missing ')' 2018-07-22 10:50:41 -05:00
Roxy-3D a35abce1ac
Fix missing ')' 2018-07-19 19:20:40 -05:00
Scott Lahteine 76d4cfb064 Tweak some Max7219 code 2018-07-19 18:49:39 -05:00
Scott Lahteine 4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z 
[2.0.x] Manual Z Start Height
 2018-07-19 18:26:26 -05:00
Roxy-3D 03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units 2018-07-19 17:02:46 -05:00
Roxy-3D db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's 2018-07-19 17:01:31 -05:00
Roxy-3D 9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) 
* Add Multi Unit Support for Max7219 to bugfix_2.0.0

* Apply multi-MAX7219 to example configs

* Tweak some spacing, macros
 2018-07-19 13:56:47 -05:00
Scott Lahteine 39c8aed8ba Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:49:20 -05:00
Scott Lahteine 2106fa26b1 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:49:20 -05:00