zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
13553 commits 1 branch 0 tags 156 MiB
Commit graph

669 commits

Author SHA1 Message Date
etagle 1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
Scott Lahteine 1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY (#11187) 2018-07-02 23:21:28 -05:00
Scott Lahteine 4b2af6ab48 Minor patches to POWER_LOSS_RECOVERY 2018-07-02 17:26:53 -05:00
Scott Lahteine fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY (#11151) 2018-06-29 22:41:02 -05:00
Scott Lahteine 229b26b02c Clear LED matrix without startup test 2018-06-26 18:54:01 -05:00
Roxy-3D 1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J 2018-06-21 13:26:20 -05:00
Scott Lahteine a2a30ff0ac Use Tool 0 for Dual X Axis G29 
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
 2018-06-20 01:32:23 -05:00
Scott Lahteine d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 (#11034) 2018-06-18 22:04:03 -05:00
Scott Lahteine f3fed52348 Fix coolstep_min_speed / sensorless homing 
Fix #8890
 2018-06-12 22:12:46 -05:00
Scott Lahteine 2ba198a624 Tweak M122 report spacing 2018-06-10 20:33:18 -05:00
Scott Lahteine 21d812d502 Fix the Z un-hop on G11 
Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>
 2018-05-29 23:41:36 -05:00
Scott Lahteine 6919e87656 Minor cleanup of multi-stepping logic 2018-05-28 17:44:33 -05:00
Eduardo José Tagle 6f330f397e [2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844) 2018-05-25 23:32:37 -05:00
etagle a11eb50a3e Refactor and optimize Stepper/Planner 
Better encapsulation and considerably reduce stepper jitter
 2018-05-20 06:23:58 -05:00
etagle 0566badcef Add memory barrier, optimal interrupt on-off 
Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)
 2018-05-20 02:39:34 -05:00
Scott Lahteine 50270b53a0 Clear up some more compile warnings 2018-05-17 18:40:49 -05:00
Scott Lahteine eb2eb72720
Modify UBL mesh_is_valid and use in leveling_is_valid (#10746) 2018-05-14 22:36:03 -05:00
Scott Lahteine 836b0bbeee Fix MBL line_to_destination 
Fix #10708
 2018-05-13 16:50:39 -05:00
Scott Lahteine ba4c32eec5 Followup to _AXIS patch 2018-05-13 10:43:35 -05:00
Scott Lahteine 08e36e264e Apply _AXIS macro 2018-05-13 06:51:01 -05:00
Scott Lahteine 99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
Scott Lahteine 8f8c6a9bc4
Move get_axis_position_mm to Planner (#10718) 2018-05-12 09:59:11 -05:00
Scott Lahteine a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
Scott Lahteine 306f0f2135
Move Stepper::synchronize to Planner (#10713) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 01:38:02 -05:00
Scott Lahteine b76344c080 More Trinamic cleanup 2018-05-10 00:12:10 -05:00
Scott Lahteine 62e7a9c671 Fix up fwretract handling 2018-05-06 01:24:14 -05:00
Scott Lahteine bfe223e120 Adjust usage of stepper.synchronize 2018-05-06 01:24:14 -05:00
Roxy-3D c2c02bdc67
Change Max7219 coordinates to traditional (X,Y) 2018-05-05 16:08:54 -05:00
Scott Lahteine b337698f96 Additional patch for no heated bed 2018-05-04 00:15:37 -05:00
Scott Lahteine d7b699ec34 Fewer includes of vector_3.h 2018-05-01 07:05:18 -05:00
Scott Lahteine 05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine 59fda986ea Allow Z_AFTER_PROBING to be 0 2018-04-30 03:25:47 -05:00
Scott Lahteine 8db7fb226a Fix M420 C for UBL 2018-04-28 08:14:20 -05:00
Scott Lahteine f83361a814 Apply const to tmc_sensorless_homing 2018-04-27 02:23:10 -05:00
Scott Lahteine 212e52e485 Basic delay for Max7219 on ARM 2018-04-27 00:41:29 -05:00
Karl Andersson 58ca3be1ec delayMicroseconds() cannot be called in critical section (#10535) 
on the STM32 platform
 2018-04-26 14:31:01 -05:00
Scott Lahteine 2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 2018-04-25 20:58:00 -05:00
Scott Lahteine 8cc31d1b2e Cleanup to emergency parser 
Followup to #10516
 2018-04-25 06:54:37 -05:00
Chris Pepper 2242b98248 [LPC176x] Emergency Parser Feature (#10516) 2018-04-25 06:44:26 -05:00
Scott Lahteine eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 2018-04-25 06:43:45 -05:00
Scott Lahteine c82dd5129f Revert potentially-not-redundant UBL test 
Response to #10435
 2018-04-24 08:04:13 -05:00
Scott Lahteine cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Scott Lahteine 023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume 
[2.0.x] Creality3D Power-Loss Recovery
 2018-04-22 00:17:44 -05:00
Scott Lahteine 3396671011
[2.0.x] Reset LCD status to fallbacks (#10470) 
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
 2018-04-22 00:16:30 -05:00
Scott Lahteine 11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Roxy-3D 23635c2b64
Update ubl_motion.cpp 
Restore necessary and needed loop termination logic.
 2018-04-19 12:04:35 -05:00
Scott Lahteine ad6baa5c9d Fix for UBL set_bed_leveling_enabled 2018-04-18 00:14:48 -05:00
Scott Lahteine f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve 
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
 2018-04-17 16:59:31 -05:00
Scott Lahteine 89b1580587 Fix compile error in tmc_status 2018-04-17 16:13:28 -05:00
Scott Lahteine 01b01f6dfd Tweak fwretract.retract debug, comments 2018-04-17 16:05:25 -05:00
Scott Lahteine e05c825a05 Update position for UBL non-segmented activate/deactivate 2018-04-17 16:02:02 -05:00
Scott Lahteine 0746aff595 Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:52:56 -05:00
Scott Lahteine 3c826e5d05 Prevent delay when power is already on 
Fix #10410
 2018-04-17 04:34:31 -05:00
Scott Lahteine 0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z (#10428) 2018-04-15 20:49:14 -05:00
Roxy-3D 21f13f9e57
Stow Probe at end of G29 J3 2018-04-13 14:46:47 -05:00
Scott Lahteine 3bc179a16f Compress/update comments ubl_motion 
…to fit more code on the screen and correct outdated commentary contrasting ABL.
 2018-04-12 18:07:19 -05:00
Luc Van Daele 646aa20b43 Overhaul of G33 Delta Calibration (#8822) 2018-04-11 21:14:48 -05:00
Sean 2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Roxy-3D 26cc12eaa4 Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 21:26:36 -05:00
Sean 2fa0a73c2c Implement filament change continuous purge 2018-04-04 20:57:51 -05:00
Scott Lahteine 241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 2018-04-02 19:33:45 -05:00
Scott Lahteine 9ec2c03c5b Fix likely error in retract/recover 
Addressing #10200
 2018-03-31 23:01:13 -05:00
Scott Lahteine 1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 2018-03-31 22:43:05 -05:00
Scott Lahteine 53f0c7522a Symmetrical FWRETRACT Z Hop 
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
 2018-03-30 15:54:01 -05:00
Scott Lahteine ea1a83ce41 Use pgm_read_ptr for tables of pointers 2018-03-23 02:16:35 -04:00
teemuatlut daf643e1ce [2.0.x] TMC: Match axis label order (#10188) 2018-03-23 01:04:12 -05:00
Scott Lahteine 1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179) 
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
 2018-03-21 19:30:06 -05:00
Roxy-3D c3c264978f
correct truncated comment 2018-03-21 16:54:45 -05:00
Scott Lahteine 9fd1016bb1 Trust the bootloader to clear globals 2018-03-21 05:49:39 -05:00
Scott Lahteine bc45fb6b13 Tweak use of move_z_after_probing 2018-03-21 01:25:08 -05:00
Scott Lahteine c352954882 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:24:51 -05:00
Scott Lahteine ae39fbd646 Also suppress keepalive with suspend_auto_report 2018-03-21 00:29:09 -05:00
Scott Lahteine 8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913 
[2.0.x] More complete Trinamic driver options
 2018-03-20 23:14:19 -05:00
teemuatlut b5b39af531 [2.0.x] TMC: Fix CURRENT_STEP_DOWN (#10170) 2018-03-20 15:16:05 -05:00
Scott Lahteine cfc13ed7f3 Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:05:16 -05:00
Scott Lahteine c95450016b Improve Trinamic support in the EEPROM 2018-03-19 22:05:16 -05:00
Scott Lahteine 48d7036874 Consolidate smart stepper driver initialization 2018-03-19 22:05:16 -05:00
Scott Lahteine dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine 1d22609473 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 04:11:46 -05:00
Scott Lahteine 978f342392 Reduce some tmc_util strings 2018-03-18 18:58:10 -05:00
Scott Lahteine c0d694d5d3 Squash UBL postscript comment 2018-03-18 18:58:10 -05:00
Scott Lahteine 1e946d681d Update Marlin for newest TMC libraries 
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
 2018-03-15 22:23:31 -05:00
teemuatlut e6dcfa64b0 Cast SERIAL_CHAR to void in M122 (#10086) 2018-03-14 07:09:06 -05:00
Studiodyne e7a61de8af [2.0] FWRetract Reset (Best way) (#10083) 2018-03-14 01:35:30 -05:00
Scott Lahteine 34f656decd Add TMC2208 include in tmc_util.h 2018-03-14 00:18:40 -05:00
Scott Lahteine 14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine 28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Scott Lahteine d0ac0151b6 Fix typo in ubl.prepare_segmented_line_to 2018-03-11 10:20:50 -05:00
Scott Lahteine 239902f861 Fix E2END and add EEPROM to Smart RAMPS 
Reference #9983
 2018-03-10 06:57:31 -06:00
Roxy-3D 26dc594ebb prevent steppers from turning off during manual probes 2018-03-10 00:15:41 -06:00
Scott Lahteine cc59ac4603 Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:10:11 -06:00
Scott Lahteine 3c2bfa5e53
Update powersupply_on in power_on/off (#10015) 
Fix #10004
 2018-03-08 18:56:47 -06:00
Scott Lahteine ca577c1638 Fix up various spacing, comments, and typos 2018-03-07 21:09:08 -06:00
Scott Lahteine 9515e5aefb Fix LA_active_extruder (static) 2018-03-07 05:49:20 -06:00
Scott Lahteine 1d604be671 Suspend auto-report during UBL map output 2018-03-07 02:00:19 -06:00
Scott Lahteine 2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine e28e3bb532 Move extended_axis_codes to PROGMEM 2018-03-06 22:21:24 -06:00
Scott Lahteine b08ec22fe1
Show E0-E4 in monitor_tmc_driver output (#9969) 
Fix #9966
 2018-03-06 19:01:07 -06:00
Scott Lahteine eb867817b5
Prevent filament runout false positives (#9946) 2018-03-05 01:49:30 -06:00
Scott Lahteine beeed580b8
Implement digipots for MKS SBASE (#9927) 
Fix #9477
 2018-03-04 15:14:47 -06:00
Scott Lahteine 24b9c1923f ubl G29 tweaks 2018-02-28 03:40:06 -06:00
Scott Lahteine 7bdb98c946 Fix #9826. Solution by @gloomyandy 2018-02-26 15:02:19 -06:00
Roxy-3D 306f44198e Prevent serial buffer overrun in Pronterface 
75ms might  be excessive...    But I know people are seeing problems with PronterFace as the client...
 2018-02-25 23:50:44 -06:00
Scott Lahteine 966d9af98a Mesh export in Bilinear + UBL M503 2018-02-25 23:25:39 -06:00
Scott Lahteine 2228dff3ea ubl.h compile flags from 1.1.x 2018-02-25 23:03:08 -06:00
Scott Lahteine f3dbe19669 Tweaks to HAL codestyle 2018-02-25 04:38:17 -06:00
teemuatlut 5968a3e60e Add ADVANCED_PAUSE_FEATURE include 2018-02-22 20:28:46 +02:00
teemuatlut 93cc3a8492 Make used methods public 2018-02-22 20:26:14 +02:00
Roxy-3D d504bbbfa4 Fix botched check for being off the mesh... 2018-02-21 14:28:58 -06:00
Studiodyne d3ca82d8c2 Support for multiple filament runout sensors 2018-02-19 07:02:50 -06:00
Scott Lahteine bd54ce830a Include utility.h in neopixel.cpp 2018-02-16 22:19:34 -06:00
Scott Lahteine 241e55ef3b Apply SERIAL_FLUSH macro 2018-02-16 17:32:12 -06:00
teemuatlut 749bc42aa9 TMC SGT is int8 (#9651) 2018-02-16 02:19:33 -06:00
Bob-the-Kuhn 2d749d490b Fix / complete USE_CONTROLLER_FAN (#9666) 2018-02-16 02:18:50 -06:00
Scott Lahteine c49844df66 !ENABLED => DISABLED 2018-02-16 01:51:34 -06:00
Scott Lahteine 304e0f8945 Followup to 21e60fd 
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
 2018-02-15 22:24:23 -06:00
Roxy-3D 21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 2018-02-15 15:07:42 -06:00
Scott Lahteine 8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine 89165326b4 Cleanup after vim and vigor 2018-02-11 06:07:30 -06:00
Scott Lahteine 38c7d53bf7 Repair some spacing 2018-02-10 19:33:26 -06:00
Scott Lahteine 7280fa1e31 Patch Power class 2018-02-10 15:41:18 -06:00
teemuatlut 5990266724 Init CS pins before loading settings (#9566) 2018-02-10 14:08:53 -06:00
Scott Lahteine cc9cef7f7a Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 05:19:33 -06:00
Scott Lahteine b639f1ad4b
Correct some retract() comments 2018-02-08 17:57:48 -06:00
Thomas Moore 1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Scott Lahteine b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine 8a6feab1c4 Num-to-string functions for DEBUG_LEVELING_FEATURE 2018-02-05 19:08:27 -06:00
Scott Lahteine e5ee0b6f6c Implement MALYAN_LCD 2018-02-04 18:52:44 -06:00
Scott Lahteine c46de340b7 Clean up trailing whitespace 2018-02-03 20:05:23 -06:00
Thomas Moore e1fd9c08b3 [2.0.x] Add support for LPC1769 at 120 MHz (#9423) 2018-02-03 19:33:26 -06:00
Scott Lahteine ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause 
[2.0.x] Pause resuming fix
 2018-02-01 23:32:24 -06:00
Scott Lahteine 6339b506c0 Make sure binary.h is included as needed 2018-02-01 21:37:35 -06:00
studiodyne 51d080d2c1
Update Pause 2018-01-29 21:57:37 +01:00
Scott Lahteine 2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine 45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire 
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
 2018-01-23 20:14:02 -06:00
Scott Lahteine 1dcfe193ac Optimize some serial strings 2018-01-23 19:14:00 -06:00
Thomas Moore 3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine b1cd012aa6 Clean up and document load/unload/pause/resume 2018-01-22 05:45:46 -06:00
Scott Lahteine 266086670b Better LCD message when heating needed 2018-01-22 04:38:37 -06:00
Scott Lahteine 61bf8478a2 Add hotEnough methods 2018-01-22 04:38:37 -06:00
Scott Lahteine 8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
Roxy-3D bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
Roxy-3D af9b32e3b9
Give PronterFace time to print the UBL What information... 
Give PronterFace time to print the UBL What information...
 2018-01-16 18:00:57 -06:00
Roxy-3D f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
Thomas Moore 6856eccc77 Master-only TwoWire class for LPC1768 2018-01-15 05:22:03 -06:00
Scott Lahteine 43d3d024ac
Update tmc_util.cpp 2018-01-15 04:51:59 -06:00
Panayiotis Savva ad500b01e0 Fixes TMC compilation error 2018-01-15 12:43:22 +02:00
Scott Lahteine 6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Thomas Moore f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
teemuatlut 9d923c6c03 Fix TMC gcode commands 2018-01-08 18:45:05 +02:00
Scott Lahteine 60d07f20e7 Make mbl.has_mesh() a method 2018-01-07 00:13:36 -06:00
Scott Lahteine 86818c9a89 Move MBL functions into the class 2018-01-07 00:13:36 -06:00
Scott Lahteine e89f1453ab UBL G29 works without settings.load() 2018-01-05 15:48:34 -06:00
Scott Lahteine 7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
studiodyne 31582caa07 2.0 Fix for bad Pause extruder position resuming (#9029) 2018-01-03 23:18:27 -06:00
Thomas Moore 8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Scott Lahteine 9686ffedef Single pause flag also indicates SD print pause 2017-12-30 04:44:59 -06:00
Scott Lahteine b259bb4670 Fix tmc_util global vars 2017-12-25 09:05:31 -06:00
Scott Lahteine 4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine 4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine f704f405af Add pause/resume actions on M600, M125 2017-12-25 01:39:18 -06:00
Thomas Moore f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine 705ea98fd3 Comment return false in motion functions 2017-12-24 22:57:15 -06:00
Scott Lahteine caa5093498 General DELTA_IK macro 2017-12-21 22:41:57 -06:00
Scott Lahteine 913d9e9a59 Matching sign across filwidth vars 2017-12-20 00:17:19 -06:00
teemuatlut 0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine d568e586b7 Fix up ubl_motion indentation 2017-12-11 03:08:45 -06:00
Scott Lahteine 6d0678d963 Omit unused UBL motion code 2017-12-11 03:08:18 -06:00
Scott Lahteine 3255712343 Skew Correction for UBL 
Also remove unused grid slicing function when using UBL segmented.
 2017-12-11 03:08:15 -06:00
Scott Lahteine 3d796d8040 Move debug code 2017-12-11 00:27:06 -06:00
Scott Lahteine 3db5303bfe _buffer_line => buffer_segment 2017-12-11 00:27:06 -06:00
Scott Lahteine a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine 73e32925e4 References are better for array args 2017-12-11 00:27:06 -06:00
Scott Lahteine 204199e1ce Only compare XYZ to check motion 2017-12-10 23:00:00 -06:00
Scott Lahteine 03ba79f144 Sync and report changed position 2017-12-10 21:39:49 -06:00
Roxy-3D f58eb391aa [2.0.0] Better off mesh behavior for UBL (#8714) 
* Better off mesh behaviour for UBL

* Suggested ubl.h changes
 2017-12-08 19:00:59 -06:00
Scott Lahteine cdfabbc507 Shorten error text in G29 2017-12-06 21:50:54 -06:00
Scott Lahteine c846388a65 Standardize LCD interface code for UBL a little 2017-12-06 21:50:54 -06:00
Scott Lahteine 2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Scott Lahteine 24437de591 Use custom segment length for UBL Cartesian 2017-12-03 00:10:54 -06:00
Roxy-3D 48fb4e0932
Get Bi-Linear to work with G26 
More corrections to make that happen...
 2017-12-02 14:14:24 -06:00
Roxy-3D 0850b38b45
Get Bi-Linear working with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:10:30 -06:00
Scott Lahteine 000b3b3117 Comment/cleanup of motion code 2017-12-02 01:09:55 -06:00
Scott Lahteine e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Tannoo cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine ef2531558c Add an option to segment leveled moves 2017-11-29 16:57:30 -06:00
Scott Lahteine 276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Roxy-3D e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine e34c6827ea Init MIXING virtual tools as switching 2017-11-24 18:02:09 -06:00
Scott Lahteine b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Roxy-3D ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine 1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
Scott Lahteine 550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine 32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine 50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine d4a1154c25 Use do_blocking_move_to where possible 2017-11-10 20:55:23 -06:00
Scott Lahteine cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Thomas Moore 600c85226e Normalize load/unload length in M600 2017-11-10 02:31:46 -06:00
Scott Lahteine 22e18fe832 Patch _manual_goto_xy for kinematics 2017-11-08 22:21:38 -06:00
Scott Lahteine 0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Scott Lahteine 8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:06:20 -06:00
Scott Lahteine 24437fbb13
Fix G26 Y argument bug 2017-11-08 19:20:10 -06:00
Roxy-3D ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine cc4d28b73c
Update bilinear for native workspace 2017-11-06 17:04:41 -06:00
Scott Lahteine 297666ea14 Use fastio for Alligator dac084s085 2017-11-05 19:14:42 -06:00
studiodyne d295f984e3
Update fwretract.cpp 2017-11-05 15:42:30 +01:00
Scott Lahteine d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine 79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
Scott Lahteine f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Scott Lahteine f7133e53fd
Fix case light off 
Addressing #8205
 2017-11-01 21:22:15 -05:00
Scott Lahteine b338cafc65 Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 
[2.0.x] Improved Firmware Retraction logic
 2017-10-27 02:02:06 -05:00
Scott Lahteine ada90f7335 Clean up trailing spaces 2017-10-26 23:33:43 -05:00
Scott Lahteine daeff5a11a Tweak neopixel self-test 2017-10-26 22:47:07 -05:00
studiodyne eb02f8c719 Improve FWRETRACT logic, add common sense 2017-10-26 22:22:54 -05:00
Scott Lahteine c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity 
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
 2017-10-26 17:24:38 -05:00
Roxy-3D 3f5f39576b Reprint option for last SD Memory card file (#8106) 
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
 2017-10-26 15:50:18 -05:00
Scott Lahteine 3ac581eac9 Neopixel changes for parity with 1.1.x 2017-10-25 18:40:04 -05:00
Scott Lahteine 580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
studiodyne 8181220bfd Fix position sync in M600 pause/resume 2017-10-24 14:29:15 -05:00
Roxy-3D 72156a2029 change to better (more clear) names (#8050) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 11:42:26 -05:00
Roxy-3D 5439358281 Basic UBL operations working on 32-bit platforms (#8024) 
* 32-bit work for UBL

* Update FT i3-2020 reference file
 2017-10-19 10:44:45 -05:00
Roxy-3D 572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015) 
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
 2017-10-18 14:00:29 -05:00
Roxy-3D 6cb26c98c8 Fix Baby Stepping on 32-Bit platforms (#8001) 
Also, Max7219 debug code was used for this effort.   It has been
improved and hardened.
 2017-10-16 16:29:37 -05:00
Scott Lahteine 1344ca4b2f UBL no longer needs ubl_state 2017-10-14 02:18:32 -05:00
Scott Lahteine 3e3911fb81 Use planner.leveling_active for all leveling systems 2017-10-14 02:18:31 -05:00
Scott Lahteine 32c607ffe2 Ensure fade factor is recalculated if fade height changes 2017-10-14 02:18:31 -05:00
Scott Lahteine ca1e47375c Move fade_scaling_factor_for_z to Planner 2017-10-14 02:18:31 -05:00
Scott Lahteine 9a930ebec2 Make leveling_is_active a macro 2017-10-14 02:18:31 -05:00
Scott Lahteine 1adb5a6a48 Remove obsolete UBL z_offset 2017-10-13 08:22:46 -05:00
Bob-the-Kuhn 4e3ee845b9 config_adv (#7941) 
get rid of twi.h

move to board files
 2017-10-11 15:42:24 -05:00
Roxy-3D 0e260c6c1d Get FolgerTech i3-2020 working again with 32-bit platforms (#7944) 
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.

Also fix MAX7219 debug lights on 32-bit platforms.
 2017-10-11 15:23:04 -05:00
Scott Lahteine f8e8fcb978 Move FILAMENT_RUNOUT_SENSOR to a feature 2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk a11e6a1022 Different NEOPIXEL types 
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
 2017-10-10 02:17:36 -05:00
Scott Lahteine 442669d23c Allow UBL to build without a probe 2017-10-09 18:57:41 -05:00
Unknown 12730c1303 [2.0.0] Resolve USE_CONTROLLER_FAN compile errors 
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
 2017-10-07 05:26:36 -07:00
Scott Lahteine e472a7569b Remove extra auto_current_control call 2017-10-02 23:32:05 -05:00
Scott Lahteine a03e70d46c Fix M600 resume_print 
Derived from #7811 and #7779
 2017-10-01 21:59:42 -05:00
Scott Lahteine ac41eb5871 Merge pull request #7722 from tcm0116/2.0.x-warnings 
Cleanup 2.0.x compiler warnings
 2017-10-01 21:56:54 -05:00
Thomas Moore ae2173cd52 Synchronize retractions 2017-09-30 17:28:46 -05:00
Thomas Moore 0cb00f52d9 Cleanup warnings 2017-09-30 16:47:17 -05:00
Christopher Pepper bea3ec2724 M355 S0, S1 fixes & faster LCD, SD card 
fix Travis error
 2017-09-27 19:26:00 -05:00
Scott Lahteine dff2904c0f Marlin code whitespace cleanup 2017-09-27 10:55:36 -05:00
Scott Lahteine bfd1e75c04 Patch for caselight + lcd compile issues 2017-09-23 18:12:04 -05:00
Scott Lahteine a10451ceed Move Volumetric methods to Planner 2017-09-21 16:27:11 -05:00
Scott Lahteine 6f92ab7eed Move Controller Fan to feature 2017-09-21 16:27:11 -05:00
Scott Lahteine 1a37ebc76d Move M163-M165 MIXING_EXTRUDER to cpp 2017-09-21 16:27:10 -05:00
Scott Lahteine 8ca0b2fd68 Move M355 caselight to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine 6e0503eab2 Move M907-M910 to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine 75cf17d816 Move M702 MK2_MULTIPLEXER to cpp 2017-09-21 16:27:08 -05:00
Scott Lahteine 4a220a8b79 Move M380_M381 to cpp, solenoid feature 2017-09-21 16:27:06 -05:00
Scott Lahteine b464887ea1 Make BARICUDA a feature 2017-09-21 16:26:57 -05:00
Scott Lahteine a41130f854 Temp stat LEDs 2017-09-21 16:26:55 -05:00
Scott Lahteine be0e4a4ad0 Consolidate pause, apply to M125, M600, M24 2017-09-21 16:26:53 -05:00
Scott Lahteine 4f1eadf41f FILAMENT_WIDTH_SENSOR feature 2017-09-21 16:26:48 -05:00
Scott Lahteine d5fe0fb02b Consolidate PrintCounter 2017-09-21 16:26:48 -05:00
Scott Lahteine 551752eac7 Consolidate "bedlevel" code 2017-09-21 16:26:47 -05:00
Scott Lahteine 71aefc2e22 Move heater output to Temperature class 2017-09-21 16:26:47 -05:00
Scott Lahteine bf7af95db3 Move flow_percentage to Planner 2017-09-21 16:26:46 -05:00
Scott Lahteine 8fbb833de9 Encapsulate RGB(W) LEDs 2017-09-21 16:26:46 -05:00
Scott Lahteine a98e9874db FWRETRACT as a feature 2017-09-21 16:26:46 -05:00
Scott Lahteine 722786966a Add gcode.cpp, motion.*, queue.* - Apply to some G-codes. 2017-09-21 16:26:45 -05:00
Scott Lahteine 4231faf779 Initial split-up of G-code handlers by category 2017-09-21 16:26:45 -05:00
Scott Lahteine 4a82e95c3e Feature file updates 2017-09-21 16:26:41 -05:00
Scott Lahteine fa5f9c2aec Move 'feature' files 2017-09-07 07:42:54 -05:00