Commit graph

2136 commits

Author SHA1 Message Date
AnHardt 7b2550a604 Times can't be negative.
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
2015-03-30 01:58:46 +02:00
AnHardt 507efa771b Remove unused variable fan_rot
and satisfy the compiler about the implicit compare.
2015-03-30 01:46:38 +02:00
AnHardt 2b959a7752 Some additional {} to make the compiler happy. 2015-03-30 01:42:35 +02:00
AnHardt 0f1bd6e4a7 In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
2015-03-30 01:40:58 +02:00
Scott Lahteine a22efc5f11 Merge pull request #1597 from Wurstnase/g29_auto_script
G29 auto script
2015-03-28 20:54:17 -07:00
Scott Lahteine 62a3da9618 Merge pull request #1723 from thinkyhead/tweak_g92
Tweak G92
2015-03-28 20:53:37 -07:00
Scott Lahteine afff968e88 ARRAY_BY_EXTRUDERS, shorthand to sync planner
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
2015-03-28 20:33:21 -07:00
Scott Lahteine 2b0c25a091 Tweak G92 to call plan_set_position only once, yes? 2015-03-28 19:18:24 -07:00
Natealus 22bea37393 Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
2015-03-28 20:14:42 -06:00
Scott Lahteine 93dc0d0518 Merge pull request #1718 from AnHardt/blink
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
2015-03-28 16:20:33 -07:00
Scott Lahteine edb67ea165 Patch generic delta config
- Addressing issue mentioned at #1699
2015-03-28 14:13:25 -07:00
AnHardt c481c3b180 Move variable blink from ultralcd.h to dogm_lcd_implementation.h
to avoid warnings about unused blink.

Concentrate definitions of variables in dogm_lcd_implementation.h to one place.

Make only local used variable currentfont static.
2015-03-28 13:14:38 +01:00
Scott Lahteine ba871e46bf Fix compiler warnings
- Patched up for most included configurations
2015-03-27 20:29:05 -07:00
Scott Lahteine ffe0df4b36 Latest upstream commits 2015-03-27 18:30:56 -07:00
Scott Lahteine bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji
The big Language Pack
2015-03-27 18:24:19 -07:00
Scott Lahteine abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper
use only one implementation for beeper feedback
2015-03-27 17:03:38 -07:00
Scott Lahteine 55739a4efe Fix Z_APPLY_STEP 2015-03-27 17:02:11 -07:00
Scott Lahteine df02b992b0 Fix redundant_temperatrure_raw setting 2015-03-27 16:37:22 -07:00
Scott Lahteine fe29bdd72b Also fix temperature externs 2015-03-27 16:26:07 -07:00
Scott Lahteine 578f93bc26 Fixup temp arrays and leveling equation, prepare for merge 2015-03-27 16:20:23 -07:00
Scott Lahteine 7d472367e2 Merge pull request #1713 from epatel/Development
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
2015-03-27 16:14:55 -07:00
Scott Lahteine ce485175eb Give all temp arrays 4 indices 2015-03-27 16:11:28 -07:00
Edward Patel 782464ea4d Parentheses need here otherwise sanitycheck.h does wrong thing on line 222 2015-03-27 20:22:59 +01:00
Scott Lahteine 460f73056b Fix ECHOPAIR ambiguity
- Also patch up some warnings
2015-03-27 00:46:39 -07:00
Scott Lahteine 19d418cd6a Fix up the code to eliminate warnings 2015-03-27 00:32:58 -07:00
Scott Lahteine b2496533c6 Put " M" into pmem 2015-03-26 20:30:14 -07:00
Scott Lahteine 267d6bef15 Eliminate most warnings
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
2015-03-26 20:07:17 -07:00
Scott Lahteine 3fd7790a15 Merge branch 'Development' into fixup_leveling
Latest upstream commits
2015-03-26 19:56:58 -07:00
Scott Lahteine b76a352d41 Fix the planeNormal calculation 2015-03-26 17:14:07 -07:00
Scott Lahteine 410f64782a Always 4 temp sensors 2015-03-26 16:22:21 -07:00
Scott Lahteine 0b32431551 Remove abs() from planeNormal.z 2015-03-26 16:20:23 -07:00
Scott Lahteine 53169d96e8 Set temp_meas_ready in set_current_temp_raw 2015-03-26 16:02:15 -07:00
Scott Lahteine 06eb7f5b3c Latest upstream commits 2015-03-26 15:30:51 -07:00
Scott Lahteine 04328d7537 Add zprobe_zoffset in set_bed_level_equation_*
- Also a small tweak to SanityCheck.h
2015-03-26 15:29:16 -07:00
Scott Lahteine d2e73545ba Merge pull request #1705 from AnHardt/ddt
Avoid warnings in SanitiCheck.h
2015-03-26 15:16:37 -07:00
Scott Lahteine 78090275a9 Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
2015-03-26 13:52:48 -07:00
AnHardt 1ff6df8f9e Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
2015-03-26 21:30:53 +01:00
AnHardt ebe5b87c2c < like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
2015-03-26 21:18:19 +01:00
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	README.md
Solved
2015-03-26 10:05:00 +01:00
Christian Bohn eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Scott Lahteine abadeac08d Group zprobe_zoffset with bed leveling 2015-03-25 23:06:33 -07:00
Scott Lahteine 9e8427f253 Merge pull request #1698 from zeuseye/Development
Clean "fromsd" array if not SDSUPPORT
2015-03-25 22:21:57 -07:00
Scott Lahteine 32331faee4 Prettify Bed Level Correction Matrix
- Put + in front of positive values in the output
2015-03-25 22:13:59 -07:00
Scott Lahteine f5f4c2b366 Merge branch 'Development' into fixup_leveling
Latest upstream commits
2015-03-25 21:30:49 -07:00
Scott Lahteine 7667023817 Merge pull request #1694 from Wurstnase/fix_z_config
comment #define Z_DUAL_STEPPER_DRIVERS
2015-03-25 21:28:17 -07:00
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling
Latest upstream commits
2015-03-25 21:24:38 -07:00
Scott Lahteine ad05a726c1 Merge pull request #1691 from AnHardt/PID_dt
Move definition of PIDdT back to temperature.h
2015-03-25 21:22:39 -07:00
Scott Lahteine 5261d35737 Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
2015-03-25 21:20:50 -07:00
Scott Lahteine fbf9b21e0c Merge plus fixup zprobe_zoffset
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
2015-03-25 21:14:00 -07:00
Scott Lahteine 96b5da7198 Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
2015-03-25 20:36:24 -07:00