daid
a504c88346
Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts.
2013-08-01 14:12:30 +02:00
Nicolas Rossi
394ed08f88
Added feedrate setting for manual moves from panel
2013-07-30 14:33:30 +02:00
Nicolas Rossi
9bf1cf1b22
Pre-calculate diagonal rod length squared
2013-07-30 14:09:21 +02:00
Nicolas Rossi
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:02:18 +02:00
Brendan-csel
d7f384f680
Skip SD menu refresh if nothing has changed
2013-07-30 14:02:15 +02:00
Brendan-csel
abc8320a68
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-30 14:02:13 +02:00
Guillaume Seguin
f4c3135c6d
Add Panelolu2 pins for RAMPS1.3
2013-07-30 14:02:11 +02:00
Guillaume Seguin
aae42c68f9
Update French translation in language.h
2013-07-30 14:02:08 +02:00
Guillaume Seguin
4d435c38a6
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-30 14:02:06 +02:00
Guillaume Seguin
6c42a3a339
Woops, fix logic
2013-07-30 14:02:04 +02:00
Guillaume Seguin
376d8af2c8
Report temperatures for all extruders
2013-07-30 14:02:01 +02:00
ErikZalm
434b6a05c1
Merge pull request #552 from iXce/Marlin_v1
...
Report temperatures for all extruders in reply to M105
2013-07-29 10:39:21 -07:00
ErikZalm
bdc2621119
Merge pull request #561 from Brendan-csel/Marlin_v1
...
Fix for Viki LCD issues printing from SD card
2013-07-29 10:38:17 -07:00
ErikZalm
6965bd4e15
Merge pull request #560 from njprossi/Marlin_v1
...
Fixed move from panel for delta bot #557
2013-07-29 10:37:40 -07:00
ErikZalm
a55b33e613
Merge pull request #559 from iXce/panelolupinsramps13
...
Add Panelolu2 pins for RAMPS1.3
2013-07-29 10:37:03 -07:00
ErikZalm
8b34351537
Merge pull request #558 from iXce/frenchupdate
...
Update French translation in language.h
2013-07-29 10:36:43 -07:00
ErikZalm
735e556724
Merge pull request #555 from iXce/liquidtwi2_makefile
...
Add support of LiquidTWI2-based panels to Makefile
2013-07-29 10:33:54 -07:00
Brendan-csel
d80aecda0a
Skip SD menu refresh if nothing has changed
2013-07-29 21:00:29 +12:00
Brendan-csel
be2dea1dc6
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-29 20:58:09 +12:00
Nicolas Rossi
55c287a69e
Fixed move from panel for delta bot #557
2013-07-28 22:54:37 +02:00
Guillaume Seguin
1902d339b0
Add Panelolu2 pins for RAMPS1.3
2013-07-28 19:19:57 +02:00
Guillaume Seguin
eb23a68e92
Update French translation in language.h
2013-07-28 18:50:47 +02:00
ErikZalm
1561c6df51
Merge pull request #547 from wolfmanjm/delta-configuration
...
Setup Default configuration for Deltas if DELTA is defined
2013-07-24 03:11:36 -07:00
Guillaume Seguin
374bc99fa3
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-24 12:09:53 +02:00
Jim Morris
ab624eac2a
revert COnfiguratiuon to the same as head
2013-07-24 02:57:46 -07:00
Jim Morris
52f79ffeca
add an example default configuration for delta style bots
2013-07-24 02:55:52 -07:00
Jim Morris
b9d7ccf1cd
Merge remote-tracking branch 'upstream/Marlin_v1' into delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2013-07-24 02:49:25 -07:00
Guillaume Seguin
d4d1540727
Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit
2013-07-24 11:19:38 +02:00
Guillaume Seguin
01ed99143c
Woops, fix logic
2013-07-23 23:34:42 +02:00
Guillaume Seguin
76841450c8
Only display poweron/poweroff if PS_ON_PIN > -1
2013-07-23 22:28:30 +02:00
Guillaume Seguin
44f327d738
Uniformly reindent language.h
2013-07-23 22:13:40 +02:00
Guillaume Seguin
326d2db025
Update language.h so that all languages compile
...
Some strings still need translation, but at least everything compiles.
2013-07-23 22:11:54 +02:00
Guillaume Seguin
2cb716f513
Run Marlin/language.h through dos2unix
2013-07-23 21:49:37 +02:00
Guillaume Seguin
34da3a0a3f
Merge github.com:ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/language.h
2013-07-23 21:46:41 +02:00
Guillaume Seguin
18199ff960
Merge github.com:ErikZalm/Marlin into Marlin_v1
2013-07-23 21:33:52 +02:00
Robert F-C
fb5334f428
Fixed compile error when QUICK_HOME is defined.
...
As well a couple of minor changes to handling of extruder offset for
dual x-carriage mode.
2013-07-22 22:46:14 +10:00
Robert F-C
c3568398b5
Disable DUAL_X_CARRIAGE by default
2013-07-20 23:50:30 +10:00
Robert F-C
39cd3dbdbe
Remove dual x-carriage functionality that could/should be implemented in slicer
...
Also added a couple of missed merge lines in homeaxis() from previous
commit.
2013-07-20 13:07:50 +10:00
Jim Morris
fb20ceabce
enable soft endstops for delta
...
disable delta by default
2013-07-17 16:21:51 -07:00
Jim Morris
d01ee7e7b5
fix zjerk being the same for delta as xy jerk
...
add more delta defaults
on delta make second home even slower
2013-07-17 16:14:07 -07:00
Robert F-C
d7390e13d9
Support dual x-carriage printers
...
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
2013-07-17 22:44:45 +10:00
Jim Morris
f3aa2a48e7
update max pos
2013-07-17 01:29:51 -07:00
Jim Morris
460751503e
Added default configurations for deltas when DELTA is defined
2013-07-17 01:17:27 -07:00
Maik Stohn
9da94c247a
fixed bad lcd commit from makr3d
...
#elsif does not exist #elif is correct
2013-07-15 17:34:21 +02:00
Erik van der Zalm
59004023fd
Fixed typo
2013-07-15 17:22:56 +02:00
Erik van der Zalm
461dad6e05
Added : M32 - Select file and start SD print (Can be used when printing from SD card)
...
Untested
2013-07-14 22:39:59 +02:00
Erik van der Zalm
c4a2077951
M109 and M190 now wait when cooling down if R is used instead of S.
...
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
2013-07-14 21:10:24 +02:00
ErikZalm
8a2a3ef91d
Merge pull request #531 from iXce/Marlin_v1_lcd
...
Only clamp panel movements if software endstops are enabled
2013-07-14 06:50:23 -07:00
Erik van der Zalm
6397b3339c
restored configuration.h defaults
2013-07-14 15:49:03 +02:00
Erik van der Zalm
cdaaad3df1
Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1
2013-07-14 15:45:49 +02:00
Erik van der Zalm
e3bdefd873
fixed missing #endif
2013-07-14 15:42:53 +02:00
Erik van der Zalm
a5be0c52c6
no message
2013-07-14 15:35:54 +02:00
Michael Mayer
e509cdbeb0
added contrast control function for gLCDs
2013-07-14 15:28:26 +07:00
Michael Mayer
99b7e926e7
added MaKr3d Melzi board
2013-07-14 15:17:55 +07:00
Gabino Lopez
68be33b1fc
Update language.h
...
I update the spanish Messages, now this compile for spanish language.
2013-07-04 10:23:00 +02:00
daid
acb3271c9a
Merge pull request #534 from xifle/Marlin_v1
...
Fixes compiler warning for feedrate deadzone
2013-07-01 23:41:51 -07:00
xifle
61fe430d4f
Should fix compiler warning for feedrate deadzone
2013-07-01 11:10:02 +02:00
Gord Christmas
fde17d5720
Fix for ugly code compilation errors in SERVO_ENDSTOP checks
2013-06-28 08:02:04 -07:00
Guillaume Seguin
aa65c20d1f
Only clamp panel movements if software endstops are enabled
2013-06-28 14:18:00 +02:00
Erik van der Zalm
ecf3ab5de4
Added thermistor 60 to configuration.h
2013-06-27 23:25:51 +02:00
Nicolas Rossi
2daa85918e
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/language.h
Marlin/pins.h
Marlin/ultralcd.cpp
2013-06-20 23:59:56 +02:00
Erik van der Zalm
2015989f84
Added DISABLE_MIN_ENDSTOPS
2013-06-18 19:20:26 +02:00
Christian Inci
648d45cfb2
Fix Pin Description Typo
...
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2013-06-16 23:35:33 +02:00
ErikZalm
171719f18c
Merge pull request #525 from lajos/ultralcd_pid
...
ultralcd.cpp compile errors when !defined(PIDTEMP)
2013-06-16 00:02:54 -07:00
lajos
b519af4f05
fixed another !defined(PIDTEMP) compile in ultralcd.cpp
2013-06-15 20:49:18 -04:00
lajos
7d03c52511
fixed compile error in ultralcd.cpp when PIDTEMP undefined
2013-06-15 18:09:52 -04:00
lajos
02dee80fa5
added Azteeg X1 motherboard
2013-06-15 16:58:17 -04:00
Henrik Brix Andersen
47dc70e3ec
Fix location of avrdude.conf
2013-06-15 09:50:25 +02:00
Henrik Brix Andersen
1d258903bb
Allow command line compilation when using BEEPER.
2013-06-15 09:36:55 +02:00
Erik van der Zalm
e34c9981ab
Delta disabled by default
2013-06-11 22:33:58 +02:00
Erik van der Zalm
26a441fc7d
More 3Drag controller patches.
2013-06-10 18:26:15 +02:00
Erik van der Zalm
ac975ed8c2
Merge branch 'deltabot' into Marlin_v1
2013-06-10 18:20:29 +02:00
Jim Morris
caa848f943
fix homing for deltas
2013-06-09 21:10:00 -07:00
Erik van der Zalm
7ad12be763
Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
README.md
2013-06-09 23:10:41 +02:00
Erik van der Zalm
408169aef4
Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/language.h
Marlin/pins.h
2013-06-09 22:57:40 +02:00
Erik van der Zalm
bd96d22bfb
Merge branch 'Marlin_v1' into thinkyhead
...
Conflicts:
Marlin/Configuration.h
Marlin/Configuration_adv.h
Marlin/Marlin.h
Marlin/Marlin_main.cpp
Marlin/Servo.cpp
Marlin/language.h
Marlin/pins.h
Marlin/planner.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
README.md
2013-06-09 22:26:47 +02:00
Erik van der Zalm
73f21cd5d6
Spanish updated so far.
2013-06-09 21:40:35 +02:00
Erik van der Zalm
6f4a6e531c
Merge branch 'deltabot' into Marlin_v1
2013-06-09 13:55:18 +02:00
Erik van der Zalm
01edf22a10
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
2013-06-09 13:54:19 +02:00
Erik van der Zalm
ff6fa09ecf
Moved corexy implementation from stepper to planner
...
(Thanks iquizzle)
2013-06-09 13:10:06 +02:00
Erik van der Zalm
c8dcc7c208
Allow increasing the software PWM frequency.
2013-06-09 12:52:49 +02:00
Erik van der Zalm
8b0d82e9db
Removed "awaiting translation" for french
2013-06-09 12:24:06 +02:00
Erik van der Zalm
1e05d192ab
Make the beep tone less offensive
2013-06-09 12:21:16 +02:00
Erik van der Zalm
373f3ecab3
Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/pins.h
2013-06-09 00:51:58 +02:00
kiyoshigawa
f295712008
Trying to fix weird diff on ultralcd_implementation_hitachi_HD44780.h
2013-06-08 09:27:56 -06:00
kiyoshigawa
69b02031ca
Fixed small error in lcd define statements.
2013-06-08 09:09:11 -06:00
kiyoshigawa
6a81291c57
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
...
This should fix issues with pull request 467, I hope.
Conflicts:
Marlin/Configuration.h
Marlin/Marlin.pde
Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-06-08 08:48:18 -06:00
BorisLandoni
c1cb5977ee
Update Configuration.h
2013-06-08 14:37:39 +02:00
BorisLandoni
8a5bd8a808
Update Configuration.h
2013-06-08 14:37:17 +02:00
BorisLandoni
c1d7cf939e
Update language.h
2013-06-07 17:38:17 +02:00
BorisLandoni
4c7d1436e9
Update pins.h
2013-06-07 18:37:44 +03:00
BorisLandoni
6588933c04
Update Configuration.h
2013-06-07 18:36:16 +03:00
Scott Lahteine
5dabc95409
Apply all changes from latest Marlin_V1
...
Diffed and merged, preserving my updates
2013-06-06 15:49:25 -07:00
Gord Christmas
a733537ddd
Missed some variable declarations
...
Integrated fixes from henrikbrixandersen pull request #504
2013-06-06 09:18:03 -07:00
Gord Christmas
f4f30c9d64
Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.
2013-06-06 07:36:52 -07:00
Erik van der Zalm
79374f0b93
Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-06-05 17:44:48 +02:00
Maik Stohn
da05b3ba94
faster GLCD (ST7920 SW-SPI) implementation / fixes
...
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
2013-06-05 16:27:44 +02:00
kiyoshigawa
4b19c8552e
Fixing changed Configuration.h settings to be default values per ErikZalm Request.
2013-06-04 12:01:55 -06:00
Erik van der Zalm
971ec35135
Expanded M302 to allow setting the temp
2013-06-02 17:36:23 +02:00
Erik van der Zalm
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
2013-05-29 19:29:30 +02:00
Guillaume Seguin
16b9239a26
Report temperatures for all extruders
2013-05-29 18:06:12 +02:00
ErikZalm
a964b3cf3d
Merge pull request #495 from Gatulibu/Marlin_v1
...
Added support for Megatronics v2.0 and Minitronics v1.0
2013-05-28 07:51:49 -07:00
Maik Stohn
e8572c5239
Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation
2013-05-28 15:53:07 +02:00
Maik Stohn
7ee70c2248
Fix: removed wrong ; at end of define
2013-05-28 15:50:48 +02:00
Gatulibu
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
...
merged from code downloaded from reprapworld.com
2013-05-28 14:03:31 +02:00
Erik van der Zalm
9be61cdc02
Added redundant temp sensor
2013-05-26 17:57:49 +02:00
Erik van der Zalm
7231a20dba
Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42.
2013-05-24 21:05:11 +02:00
Alexander Kasimir
e2ff536b03
Fixed typo in Comment
2013-05-22 16:02:03 +03:00
Robert F-C
40eb07bad4
Revert and extend previous change pin check change
...
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
2013-05-22 21:33:23 +10:00
Maik Stohn
bd33cf4a9f
fixed typo / added "const" to defines for newer gcc compatibility
2013-05-21 17:58:34 +02:00
ErikZalm
567291e734
Merge pull request #485 from Banjer/Panelolu2_Melzi
...
Add Panelolu2 support for Melzi
2013-05-21 08:46:27 -07:00
Maik Stohn
8d80cbbf4c
fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored
2013-05-21 16:53:38 +02:00
xifle
98d0d48191
fixed merge
2013-05-20 14:52:35 +02:00
xifle
bbe67fca5a
soft tab correction
2013-05-20 14:50:39 +02:00
xifle
9eeb711c96
Merged from Upstream Master
2013-05-20 14:45:37 +02:00
Bas Spaans
424101110c
Add Panelolu2 support for Melzi
2013-05-19 12:09:34 +02:00
Robert F-C
0d4a9444c4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-19 08:50:58 +10:00
Erik van der Zalm
86cce025f4
Added #ifdef NUM_SERVOS to servo.cpp
2013-05-18 23:12:28 +02:00
xifle
03141a5ef4
LCD: Added Deadzone at 100% Feedrate
...
This adds a deadzone at 100% Feedrate when changing it at the status
screen/main menu. Prevents from unwanted feedrate-changing when
navigating back to the main menu and makes it easier to return to 100%.
2013-05-18 19:53:46 +02:00
Gord Christmas
28ada096e2
Adding servo documentation
2013-05-18 06:01:58 -07:00
Robert F-C
4121311b9d
Change to LCD status indicators
...
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
2013-05-18 22:30:42 +10:00
Robert F-C
dfa549f268
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad
Merge pull request #482 from codexmas/Marlin_v1
...
servosupport
2013-05-16 10:19:00 -07:00
ErikZalm
86405cdd11
Merge pull request #479 from MStohn/thermocouple
...
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
2013-05-16 10:06:59 -07:00
Erik van der Zalm
6c45c3f4e7
BariCUDA changes
2013-05-16 19:01:12 +02:00
Gord Christmas
96624f0f31
Forgot to include reference to Servo in makefile
2013-05-16 08:25:20 -07:00
Gord Christmas
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
2013-05-16 07:03:01 -07:00
Gord Christmas
b668cb0516
Adding in clean copies of Servo library from Arduino 1.0.4
2013-05-16 06:47:42 -07:00
MaikStohn
95dff34b73
fixed wrong compare for min temp check of heater 1 and heater 2
2013-05-16 01:17:38 +02:00
MaikStohn
4cc6f9f6de
fixed wrong pin initialization when using temperature 2 pin input
2013-05-16 01:17:08 +02:00
MaikStohn
61a48cc662
Add support for RUMBA thermocouple add on
2013-05-16 01:16:33 +02:00
MaikStohn
9cc15876be
Add support for RUMBA thermocouple add on
2013-05-16 01:16:08 +02:00
ErikZalm
c9cf2174dd
Merge pull request #474 from xifle/Marlin_v1
...
Fixed "Cooldown" Selection not reseting bed temp
2013-05-14 14:58:53 -07:00
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
2013-05-14 23:56:32 +02:00
Jordan Miller
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
2013-05-14 23:35:01 +02:00
Jordan Miller
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
2013-05-14 23:34:45 +02:00
xifle
29bb8d7d4f
Fixed "Cooldown" Selection not reseting bed temp
...
- enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't
get processed. So I wrote a new func for the cooldown which uses
setTargetHotend. In addition this does return to status page after
selection.
- Added setWatch() to preheat-functions (Temperatur sanity check
would never have worked when preheating from the lcd panel)
2013-05-14 16:56:19 +02:00
Robert F-C
015d0594b0
Optimize menu selection for Viki rotary encoder.
...
The Viki LCD rotary encoder uses a different number of steps per
rotation. This fixes the seeming "missed" steps when selecting a menu.
2013-05-12 07:51:28 +10:00
gregor
2739c26c4f
changes:
...
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
2013-05-10 22:20:02 +02:00
gregor
6fb9573157
added support for the reprapworld keypad
2013-05-10 21:57:17 +02:00
Tim Anderson
594193c908
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-06 23:29:38 -06:00
Tim Anderson
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
2013-05-06 23:23:54 -06:00
kiyoshigawa
b27a59f41e
Added support for Elefu RA Board and Elefu Control Panel
2013-05-06 08:44:38 -06:00
midopple
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
2013-05-05 19:23:59 +02:00
midopple
db2f157a22
Replace the <= to < in the Command M907, M350 and M351.
...
The for loop for Axis count over the Array.
Add a break after M907
2013-05-05 19:19:55 +02:00
Scott Lahteine
a5cd582665
Support for 10 level deep SD folder hierarchy
2013-05-04 04:18:02 -07:00
Arnoud
fc4ab05157
Solved minor bug in controllerFan()
...
Extruder 2 was checked where extruder 1 should be checked.
2013-05-03 21:32:34 +02:00
Scott Lahteine
0ef54f2f85
Make M303 silent when "S0" is sent
...
If S is left out perhaps it should be silent, but check the spec for
this M code.
2013-05-02 09:55:15 -07:00
Scott Lahteine
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
2013-05-02 09:22:58 -07:00
Martin Renold
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
2013-05-01 08:30:24 +02:00
Robert F-C
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
2013-04-30 01:11:23 +10:00
Robert F-C
d5ad7a0814
Rework change to incorporate CONTROLLERFAN
...
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
2013-04-30 01:08:29 +10:00
Robert F-C
c3cdaceab3
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-04-29 22:13:55 +10:00
Robert F-C
1c127217df
Make DOGLCD merge neater.
2013-04-29 22:03:37 +10:00
Robert F-C
7f57f28ccc
Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer.
...
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
2013-04-29 21:50:52 +10:00
Robert F-C
788d62bcc4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz
d71f1e9bf6
Add (as an option) slower SD transfer mode
2013-04-24 10:50:57 +02:00
ErikZalm
db5bb8546d
Merge pull request #452 from MStohn/Marlin_v1
...
128x64 RepRapDiscount Full Graphic Smart Controller support
2013-04-23 09:43:37 -07:00
daid
4b2ece159b
Merge pull request #453 from brackendawson/Marlin_v1
...
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
2013-04-16 10:12:25 -07:00
Bracken Dawson
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
2013-04-16 17:37:38 +01:00
MaikStohn
7ac6d7f78e
FIX: Speedup - no explicit display clear needed in u8glib
2013-04-16 14:22:24 +02:00
MaikStohn
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
2013-04-16 14:21:39 +02:00
MaikStohn
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
2013-04-16 13:54:39 +02:00
MaikStohn
16afbf9bfa
FIX: adopted latest changes from hitachi implementation
2013-04-16 13:51:48 +02:00
daid303
34bca48b98
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2013-04-15 15:11:38 +02:00
daid303
ac52dcc174
Updated the card menu and watch messages to make it more informative.
2013-04-15 15:11:22 +02:00
Stefanowicz
31bb3fb297
Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined
2013-04-12 18:04:32 +02:00
daid303
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
2013-04-12 13:54:38 +02:00
Simon Oliver
5d5909fc25
Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().
2013-04-12 13:32:47 +02:00
Simon Oliver
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
...
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
2013-04-12 13:31:30 +02:00
Bart K
4fa2260a59
Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)
2013-03-31 19:59:16 -04:00
Erik van der Zalm
038d405254
Corrected #endif in language.h
2013-03-31 20:28:29 +02:00
Dirk Eichel
443aaa30bf
Removed GIT fragments
...
Seems that there was something wrong while merging
2013-03-30 23:26:42 +01:00
ErikZalm
7f622467fc
Merge pull request #425 from kefir-/m928_logging
...
M928 logging
2013-03-30 08:50:34 -07:00
ErikZalm
86867928ac
Merge pull request #434 from DDRBoxman/Marlin_v1
...
Add support for M300: Play beep sound
2013-03-30 08:49:54 -07:00
ErikZalm
9a38cad6f0
Merge pull request #430 from STB3/GLCD_128x64_dots
...
Final task of the 128x64dots GLCD implementation
2013-03-30 08:49:14 -07:00
ErikZalm
7a5c474d91
Update Configuration.h
2013-03-28 21:27:50 +01:00
Dirk Eichel
4e448b700a
Merged fetched files from Marlin_v1 branch
...
Pull requests: #414 #433 #432 #428
2013-03-26 21:43:04 +01:00
ErikZalm
9f2862ce48
Merge pull request #414 from whosawhatsis/Marlin_v1
...
regenerated thermistor table 7
2013-03-25 13:14:49 -07:00
ErikZalm
9fb8bd5685
Merge pull request #433 from whosawhatsis/bang-mode
...
Separate PID_MAX from BANG_MAX
2013-03-25 13:11:34 -07:00
Colin Edwards
0d075378d5
Add LARGE_FLASH define and enable it for some of the beefier boards
...
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
2013-03-25 10:42:27 -05:00
Colin Edwards
9a1c90471f
Ignore unused beeper pins
2013-03-25 10:28:15 -05:00
Colin Edwards
1a0f889803
Add support for M300: Play beep sound
2013-03-24 23:35:05 -05:00
Robert F-C
9322c408c6
Updated for LiquidTWI2 library version 1.2.3
...
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
2013-03-24 18:19:58 +11:00
whosawhatsis
fd5b7e0cec
Separate PID_MAX from BANG_MAX
...
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
2013-03-22 18:16:26 -07:00
blddk
e5a853a3d0
Added automated extruder fan function
2013-03-22 18:49:05 +01:00
blddk
72419f69a9
Added rumba
2013-03-22 18:41:54 +01:00
blddk
91bea43332
Added rumba pinout
2013-03-22 18:29:47 +01:00
blddk
d2b00fe486
Removed html and added rumba
...
Found some unwanted html at the bottom of the file which caused it to not be able to compile.
Also added rumba as machine.
2013-03-22 18:28:16 +01:00
Dirk Eichel
6c66cae694
GLCD init screen cosmetics
2013-03-19 21:25:11 +01:00
Dirk Eichel
f3e0e5184d
Add include selector between char. LCD and GLCD
2013-03-19 20:59:21 +01:00
Dirk Eichel
5d3862f9d1
Modified u8glib logo on welcome screen
2013-03-19 20:32:23 +01:00
Dirk Eichel
0b320f75e9
Removed debug code, add some comments
2013-03-19 20:29:25 +01:00
Dirk Eichel
5f1cd70122
Add code to lcd_update() for GLCD
...
This code selects between the routines for the GLCD or the char.
display.
2013-03-19 20:19:16 +01:00
Dirk Eichel
a49c09a776
Add variable for animated fan, add float conversion w/o sign
...
A new variable was introduced to allow fan animation on the GLCD.
Add additional float to string conversion routine without sign
character. This is used for the coordinates visualisation on the GLCD.
2013-03-19 20:13:23 +01:00
Dirk Eichel
26d8863111
Add library selection between GLCD and char. LCD
2013-03-19 20:03:47 +01:00
Dirk Eichel
4a141a694f
Marlin code for GLCD display
...
This contains the menues, status screen etc...
2013-03-19 19:59:56 +01:00
Dirk Eichel
83c790a020
Add bitmap graphics for GLCD
...
1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Dirk Eichel
233df9cca0
Add missing LF at the end of the file
2013-03-19 19:12:33 +01:00
Dirk Eichel
bb0de75a92
Removed umwanted HTML code ath the end of the file
...
Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.
2013-03-19 06:46:05 +01:00