zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
11221 commits 1 branch 0 tags 156 MiB
Commit graph

9428 commits

Author SHA1 Message Date
Christopher Pepper 42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Christopher Pepper 254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw 870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Christopher Pepper 5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository 
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
 2018-10-14 18:43:48 +01:00
Roman Moravčík 213e94bce2 [2.0.x] Updated slovak translation (#12059) 2018-10-14 02:15:15 -05:00
Karl Andersson a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 2018-10-14 02:14:34 -05:00
Scott Lahteine 951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Kevin Velickovic ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 2018-10-13 20:34:56 -05:00
N95JPL ab9d5eb38d Add Bootscreen Animation (#12077) 2018-10-12 22:11:20 -05:00
Scott Lahteine 26208a5c2f Clean up some boot screens 2018-10-12 18:56:39 -05:00
Scott Lahteine 9b6be0ae0f Fix lite status screen SD % 2018-10-12 17:02:59 -05:00
Scott Lahteine af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Scott Lahteine a44ef27897 Outdent singlenozzle toolchange code 2018-10-12 15:19:03 -05:00
Scott Lahteine d338e4d875 Fix singlenozzle toolchange cold extrusion test 2018-10-12 15:15:25 -05:00
Roxy-3D 25b980dddb
Remove erroneous Pin 12 definition 
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
 2018-10-12 13:45:04 -05:00
Scott Lahteine ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine 1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine 45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Giuliano Zaro d8d76cd2ba [2.0.x] Italian language update (#12060) 2018-10-10 20:13:10 -05:00
Scott Lahteine e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 2018-10-10 17:25:45 -05:00
Scott Lahteine 50cbca4c55 Hide some menu items when busy 2018-10-10 17:18:33 -05:00
InsanityAutomation 3cb5517ddb Make singlenozzle tool-change honor no_move (#12056) 
...Set no move earlier so it applies
 2018-10-10 16:49:59 -05:00
InsanityAutomation d332fcb8fa Fix firmware-retract compile errors (#12061) 2018-10-10 16:46:08 -05:00
Scott Lahteine 43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
InsanityAutomation b2c1cd7eda Allow cold change of active extruder (#12055) 
Followup to #11994
 2018-10-10 09:57:48 -05:00
Scott Lahteine d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine 9b5c1a5e77 Fix EEPROM checksum bug 
Addressing #12048
 2018-10-10 06:14:58 -05:00
Scott Lahteine 272d4a5167 Apply #pragma once 2018-10-10 02:57:01 -05:00
Scott Lahteine 07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Scott Lahteine cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Scott Lahteine 0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Scott Lahteine ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Marcio Teixeira cef1de89d0 Fixed incorrect axis index. (#12051) 2018-10-09 16:59:34 -05:00
Marcio Teixeira d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041) 
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
 2018-10-08 20:01:00 -05:00
Emilio Moretti 2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042) 
Also added details to the README to make sure the Ender-2 status is properly documented.
 2018-10-08 19:57:44 -05:00
Scott Lahteine 5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Marcio Teixeira 906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Marcio Teixeira 8dbb305e8e Fix "Missing separator" errors. (#12035) 
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
 2018-10-08 14:28:52 -05:00
Scott Lahteine 55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine d5017e2788 Add status screen with 4 nozzles 2018-10-08 01:27:21 -05:00
Scott Lahteine 7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Nils Hasenbanck 191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
Sam Lane f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation 74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
Giuliano Zaro c0d9058e25 Shorten an Italian menu title (#12034) 
…and change a multi-use "back" menu item.
 2018-10-07 16:43:48 -05:00
teemuatlut dffb4c63dc [2.0.x] TMC2660 followup (#12029) 
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
 2018-10-07 15:37:44 -05:00
Scott Lahteine d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine cb7844c8d4
Save PROGMEM on serial prefixes (#12033) 
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
 2018-10-07 15:32:15 -05:00
Scott Lahteine 07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 2018-10-06 19:51:17 -05:00
Scott Lahteine ca0e308105 Fix up some units comments 2018-10-06 19:45:50 -05:00
Scott Lahteine 65b8f3821b Suppress temperature.h compile warning 2018-10-06 19:29:41 -05:00
teemuatlut c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine cf0b9eb37c no need to use destination in do_pause_e_move 2018-10-06 16:43:21 -05:00
Scott Lahteine e8d677620c Use NUM_SERVOS in EEPROM code 
Fix #12015
 2018-10-06 15:11:32 -05:00
Scott Lahteine 0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13 acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Thomas Moore 49823a4939 Fix broken jerk handling (#12019) 
Fix #12004
 2018-10-06 12:02:50 -05:00
Scott Lahteine 52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
Scott Lahteine 77b9a41f1f Add G-code extensions to example configs 2018-10-06 00:15:35 -05:00
thesfreader e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine 33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Marcio Teixeira 03fc4d31d0 Makefile support for 32-bit Archim board and new TMC library (#11997) 
* Support new TMC library and 32-bit Archim board

- Added IS_MCU flag
  - When IS_MCU flag is 1, AVR compiler will be used
  - When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
 2018-10-05 16:06:11 -05:00
Scott Lahteine 65b36642f8 Fix Anycubic Kossel config 2018-10-04 20:27:05 -05:00
Scott Lahteine fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples 
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
 2018-10-04 19:54:12 -05:00
Marcio Teixeira 2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Giuliano Zaro 07fe8d28be [2.0.x] Partial Italian revert (#12008) 
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
 2018-10-04 14:38:54 -05:00
Scott Lahteine 517b4f4cd4 Fix lightweight UI hotends display 2018-10-04 14:37:24 -05:00
Giuliano Zaro 72a750e0eb [2.0.x] Update Italian language (#11996) 2018-10-04 03:03:47 -05:00
Scott Lahteine bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Nils Hasenbanck fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
Scott Lahteine 8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 2018-10-03 11:56:49 -05:00
Scott Lahteine c40ea1f0fd Update EEPROM_VERSION 
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
 2018-10-03 11:34:34 -05:00
Scott Lahteine 1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
AnoNymous 001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine 348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine 3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
brian park 2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Eduardo José Tagle d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine 0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine 0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine 3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine 606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations 
Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-10-01 01:41:11 -05:00
dot-bob b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine 389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation 8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation 2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation 6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine 11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation 4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine 8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine 3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine 693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine 9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine 14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin 2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore 3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine 7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro 70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller 935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine 1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine 321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation 23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine 1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng 93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation 95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin 84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine 6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine 241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller 0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine 5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00