Scott Lahteine
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Karl Andersson
76e9ee33aa
Fix include order to make SERIAL_PORT_2 work ( #13241 )
2019-02-23 16:56:09 -06:00
Scott Lahteine
631d867dc9
HAL cleanups
2019-02-20 06:27:26 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Karl Andersson
64a4649290
STM32 - Fix SD write ( #12897 )
2019-01-15 18:44:22 -06:00
Nils Hasenbanck
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
mr-miky
11c7945365
Don't include STM32 Core code when compiling STM32 Generic ( #12575 )
2018-12-03 06:55:49 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Nils Hasenbanck
5a4fd8e0a6
Fix access to the DWT peripheral for STM32 HAL ( #12434 )
...
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.
This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
2018-11-18 01:30:46 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
2018-11-05 22:48:28 -06:00
Karl Andersson
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
2018-11-04 15:03:45 -06:00
Nils Hasenbanck
cafabf2055
Implement DELAY_NS with CYCCNT on Cortex-M7 ( #12283 )
2018-11-01 16:11:51 -05:00
Karl Andersson
484ca68228
Fix misplaced parentheses ( #12284 )
2018-10-31 15:34:37 -05:00
Karl Andersson
1946f729fd
STM32 FastIO using register access ( #12276 )
2018-10-30 19:25:44 -05:00
Scott Lahteine
4ed579cafc
Americanized English spelling
2018-10-30 18:55:38 -05:00
Scott Lahteine
7a04eb3a8b
Fix some comment formatting
2018-10-23 22:35:44 -05:00
Karl Andersson
aa72884a6e
Enable use of SERIAL_PORT_2 on HAL_STM32 ( #12197 )
2018-10-23 15:24:58 -05:00
Nils Hasenbanck
9deb23aa47
Add missing SerialUSB definition for STM32 HAL ( #12124 )
2018-10-17 11:14:10 -05:00
Scott Lahteine
cce4931342
Clean up recent contribs
2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa
STM32F4xx modifications for HAL_STM32 ( #12080 )
2018-10-16 06:42:41 -05:00
Scott Lahteine
0bd54392b7
Use uint8_t in EEPROM code
2018-10-09 19:00:01 -05:00
Nils Hasenbanck
191df5e17d
Correct PWM_PIN behavior for STM32 HALs ( #12027 )
2018-10-07 17:08:01 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM ( #12016 )
2018-10-06 00:14:12 -05:00
Nils Hasenbanck
fcf6d127fd
STM32 timer simplification ( #11995 )
...
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
2018-10-03 22:33:24 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core ( #11750 )
2018-10-03 03:26:07 -05:00
