Kevin
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
Scott Lahteine
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
Scott Lahteine
aa9d329560
Reduce max accel in Creality configs
2018-08-11 22:56:51 -05:00
Scott Lahteine
72b086b90d
Add A5984 to example configurations
2018-08-09 23:04:27 -05:00
Giuliano
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
Scott Lahteine
e5c0b490c8
Add *_DRIVER_TYPE to example configs
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-07-25 02:47:30 -05:00
Scott Lahteine
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
Scott Lahteine
39c8aed8ba
Add MANUAL_PROBE_START_Z to example configs
2018-07-18 21:49:20 -05:00
Scott Lahteine
12854f1909
Add Z_CLEARANCE_MULTI_PROBE to example configs
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Chris Pepper
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
568cfe7caa
Add thermistor 501 (100K Zonestar)
2018-07-03 17:52:06 -05:00
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
Scott Lahteine
f74278b8b1
Add -4 thermocouple to list in configs
2018-06-07 21:04:06 -05:00
Scott Lahteine
aaaf09bda2
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 18:33:51 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter ( #10796 )
2018-05-21 15:51:38 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it ( #10748 )
2018-05-14 21:38:24 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
2018-05-06 19:16:55 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
Scott Lahteine
c87b0e21be
Add units to probe speed comments
2018-04-30 23:50:28 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
2018-04-21 15:43:21 -05:00
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
2018-04-09 01:55:05 -05:00
Scott Lahteine
dca69efc11
Update Bed PID comments
2018-04-08 06:44:47 -05:00
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
2018-04-07 21:03:22 -05:00
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
2018-04-06 23:09:06 -05:00
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-10 00:17:34 -06:00
Scott Lahteine
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
Scott Lahteine
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
2018-02-24 22:11:11 -06:00
