zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
2102 commits 1 branch 0 tags 156 MiB
Commit graph

1675 commits

Author SHA1 Message Date
Steffen Vogel 672f764b4d replaced ASCII GPL v3 license by markdown version 
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
 2015-01-06 11:49:05 +01:00
Steffen Vogel f25e793cff rename stepper lookup table scipt to be consistent with termistor lookup table script 2015-01-06 10:30:20 +01:00
Steffen Vogel df17a6a1b4 fix #1305 by proposed workaround (thanks gaby64) 2015-01-06 10:29:26 +01:00
Steffen Vogel f7e65935fb make use of power operator 2015-01-06 10:28:43 +01:00
Steffen Vogel 4e02aff9b5 automatically determine min/max temp for terminator 2015-01-06 10:28:19 +01:00
Steffen Vogel 81363bc441 more cleanups 2015-01-06 10:27:40 +01:00
Steffen Vogel 95f4a55820 refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients 2015-01-06 08:24:59 +01:00
Steffen Vogel 21205cc3d8 more cleanups in the termistorTable generation script 2015-01-06 08:23:51 +01:00
Steffen Vogel fb0996b5db improved output aligment and precision 2015-01-06 08:20:52 +01:00
Steffen Vogel 538231edfd cosmetic whitespace cleanup and comments added/updated 2015-01-06 08:20:20 +01:00
wgm4321 067b509479 Re-enable filament menu with recalc fix when enabling/disabling mm3 2015-01-05 22:29:29 -05:00
wgm4321 a19f2f8ae7 Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled 2015-01-04 22:15:16 -05:00
wgm4321 f24dda9700 Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3" 
This reverts commit dd7e4ee97f.
 2015-01-04 22:08:41 -05:00
wgm4321 ec4681ab6b Revert "Add "Detailed Z Probe" menu item with ABL is defined." 
This reverts commit 2b9722f387.
 2015-01-04 21:53:37 -05:00
wgm4321 dd7e4ee97f Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3 2015-01-04 21:44:55 -05:00
wgm4321 2b9722f387 Add "Detailed Z Probe" menu item with ABL is defined. 2015-01-04 21:42:16 -05:00
Dan Royer 9472bbe51d issue 968 for dev branch 
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
 2015-01-04 12:17:46 -08:00
alexborro d2b6e62996 Merge pull request #1309 from philfifi/fix_temp_runaway 
temp runaway: proper cast to prevent any overflow.
 2015-01-04 12:55:58 -02:00
Philippe L 30248214c7 temp runaway: proper cast to prevent any overflow. 2015-01-04 14:23:31 +01:00
Bo Herrmannsen c5f138ea07 Merge pull request #1291 from alhirzel/Development 
Define analogInputToDigitalPin only if needed
 2015-01-04 12:53:41 +01:00
odewdney 652895d656 try different proproc for CI failure 2015-01-04 11:15:23 +00:00
Bo Herrmannsen 3d9f4ac757 Merge pull request #1303 from wgm4321/Development 
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
 2015-01-04 01:29:26 +01:00
wgm4321 04fb34c7ff Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 17:28:05 -05:00
wgm4321 f8aa5ff771 Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined 2015-01-03 17:10:13 -05:00
odewdney 39fae9e3a3 Fix progmem warning 
Borrow code from https://github.com/arduino/Arduino/issues/1793
 2015-01-03 21:30:16 +00:00
Alexander Hirzel f36fd3ddec Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development 2015-01-02 12:39:39 -05:00
Scott Lahteine b5e50cdd4e Move scripts and documentation to subfolders 2015-01-02 08:53:09 -08:00
Alexander Hirzel eed451e034 rework analogInputToDigitalPin definition 2015-01-02 11:14:20 -05:00
Lane Roberts 1f520a5a8c Due to the fix for #1248, X and Y probe offsets must not be floats. 
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
 2015-01-02 11:12:16 -05:00
wgm4321 b32be2dc64 Fix syntax error caused by previous changes. 2015-01-02 11:12:16 -05:00
wgm4321 edac64e7d2 Add Filament menu and add Filament/Retract settings to config store. 2015-01-02 11:12:15 -05:00
Alexander Hirzel ecda6cdc0a Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 11:12:15 -05:00
David Forrest f3e503e725 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-02 11:12:15 -05:00
David Forrest 1d5d853c9a temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-02 11:12:15 -05:00
Bo Herrmannsen 63da6900b0 Merge pull request #1282 from vandarin/Development 
Due to the fix for #1248, X and Y probe offsets must not be floats.
 2015-01-02 15:35:40 +01:00
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development 
Add Filament menu and add Filament/Retract settings to config store.
 2015-01-02 15:35:29 +01:00
Alexander Hirzel ae12ad0d6c Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 01:38:03 -05:00
alexborro 80b17ab573 Merge pull request #1285 from drf5n/PID_CI_v2 
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
 2015-01-01 22:56:21 -02:00
David Forrest 625860f086 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-01 19:24:42 -05:00
David Forrest 6583bb781d temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-01 19:11:42 -05:00
Lane Roberts 2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats. 
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
 2014-12-31 12:34:59 -06:00
Grogyan 6b82415c81 Update pins.h 
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
 2014-12-31 13:04:16 +13:00
Bo Herrmannsen 692a01b1c7 Merge pull request #1277 from thinkyhead/fix_regressions 
Fix regressions affecting compilation
 2014-12-30 16:49:08 +01:00
Scott Lahteine 2ec2bf1564 Fix regressions affecting compilation 
This fixes two regressions, caused by #1167 and #1191 .
 2014-12-30 07:36:18 -08:00
Scott Lahteine e7db8ee9e5 ftostr32np > ftostr32sp 
sp=space-padded, similar to: ns=no-sign
 2014-12-30 07:26:25 -08:00
Scott Lahteine 10e1b6ef8b Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:25 -08:00
Scott Lahteine d1f21d1189 As it should be 2014-12-30 07:26:25 -08:00
Scott Lahteine 449dad71f2 Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:24 -08:00
Scott Lahteine a2109cb492 Patch to make Z look more like X and Y on UltraLCD 2014-12-30 07:26:24 -08:00
Bernhard Kubicek 3d1da45f3e Update Marlin.h 2014-12-30 08:30:37 +01:00
bkubicek d02daec08f fixed compilation 2014-12-30 08:04:06 +01:00
Caleb Anderson 991a74b75b Move delta calibration menu to sample delta configuration. 
Turn off by default.
 2014-12-29 18:03:56 -07:00
Bo Herrmannsen 67fd8f0727 Merge pull request #1267 from RobotCaleb/LanguageFix 
Language Fix - Using the new language implementation wasn't behaving as expected.
 2014-12-29 19:49:11 +01:00
Caleb Anderson 236db44669 Fix spacing 2014-12-29 10:44:55 -07:00
Caleb Anderson e6774fb7d2 Using the new language implementation wasn't behaving as expected. 
No matter what LANGUAGE_CHOICE was set to it would always take the en branch.
I revamped it a bit to use a macro to create the language include file name. This required a slight tweak to the RU declaration since it's special-cased in a couple places in code.

This is an attempt to pull my changes from #1222 over.
 2014-12-29 10:43:19 -07:00
Caleb Anderson cb047e9070 Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently) 2014-12-29 10:19:25 -07:00
Caleb Anderson 5b336a4cdb Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
 2014-12-29 10:13:00 -07:00
Bernhard Kubicek 10ad9f1062 Addes servo0 pin ultimaker 2014-12-29 17:27:14 +01:00
Bernhard Kubicek f24c5d82e3 Update Marlin_main.cpp 
fixed minor typo
 2014-12-29 17:17:30 +01:00
Wurstnase 8a6f098cc6 Expand manage_inactivity #1264 
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
 2014-12-29 17:07:22 +01:00
Wurstnase d1995aec7a Rename ignore_blocks_queued 
more speaking name
 2014-12-29 16:47:08 +01:00
Wurstnase 4122de9d17 change filament issue 
make a more general solution
 2014-12-29 16:31:00 +01:00
wgm4321 d60efc3b5d Fix syntax error caused by previous changes. 2014-12-28 20:47:59 -05:00
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development 
Tested for SAV MKI and SAV 3D LCD on lewihe.
 2014-12-28 19:54:06 +01:00
Matthew Schick 0468f81950 Update for pull request #837 2014-12-28 11:22:44 -05:00
Matthew Schick 6e42c9e305 Add fwretract settings to M503 output 2014-12-28 11:22:44 -05:00
alexborro 3afe66bb0c Fix issues #1248, #1240 
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
 2014-12-28 13:27:39 -02:00
Lukas Obermann 9eb6df17a7 Consider negative Z Offsets when auto bed leveling is active 2014-12-28 12:46:35 +01:00
Bo Herrmannsen c9f60183a9 Merge pull request #1233 from NarimaanV/Development 
Fixed BABYSTEPPING feature
 2014-12-28 10:13:21 +01:00
Bo Herrmannsen 0d957872a0 Merge pull request #1234 from gregrebholz/issue_1069 
Fixes #1069.  Added "auto fan" checks to PID_autotune.
 2014-12-28 10:12:08 +01:00
Bo Herrmannsen 9c07d28bd6 Merge pull request #1249 from drf5n/PID_CI_v2 
temperature.cpp: Add Conditional Integration to prevent excessive integral windup
 2014-12-28 10:09:25 +01:00
Bo Herrmannsen 23e768dffa Merge pull request #1250 from chertykov/Development 
Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp
 2014-12-28 10:09:08 +01:00
Scott Lahteine 2f467e2797 LCD Progress Bar 2014-12-27 22:26:14 -08:00
Denis Chertykov 050ca9ca13 Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp 2014-12-28 09:09:42 +03:00
David Forrest cf52c48d19 Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX. 
Current defaults are all 255.  If it makes sense to reduce them, they should come down together, and
be in a  PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.
 2014-12-27 15:26:09 -05:00
David Forrest 984177c40c temperature.cpp:Add PID Conditional integration on heated bed. 2014-12-27 15:26:09 -05:00
David Forrest c9b8435749 heater.c: Limit PID I term with conditional integration. 2014-12-27 15:26:09 -05:00
Greg Rebholz 7ecb7cbd46 Added "auto fan" checks to PID_autotune 2014-12-23 23:50:00 -05:00
NarimaanV 7667949aca Fixed BABYSTEPPING feature 
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
 2014-12-23 12:49:54 -05:00
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
Bo Herrmannsen 60628864ca Merge pull request #1167 from thinkyhead/sd_freemem 
Use SdFatUtil::FreeRam() for freeMemory() if there
 2014-12-20 18:31:21 +01:00
Bo Herrmannsen 889d7ba218 Merge pull request #1177 from martin-pr/probing_z_speed 
Split do_blocking_move() to XY and Z sections
 2014-12-20 18:30:35 +01:00
Bo Herrmannsen 5e7bd2dc87 Merge pull request #1200 from chertykov/Marlin_v1 
Fix syntax errors in #ifdef
 2014-12-20 18:29:39 +01:00
Denis Chertykov b086394178 Fix syntax errors in #ifdef. 2014-12-20 19:33:43 +03:00
John Davis 39d28a9bbf Update qr_solve.h 
Changed level to compensation
 2014-12-19 17:53:55 -05:00
John Davis 6325968a39 Update qr_solve.cpp 
Changed leveling to compensation
 2014-12-19 17:52:13 -05:00
John Davis e99f24ff2f Update planner.h 
Changed level and leveling to compensation.
 2014-12-19 17:51:14 -05:00
John Davis ac204028e7 Update planner.cpp 
Changed level and leveling to compensation
 2014-12-19 17:49:22 -05:00
John Davis 4315c2547a Update Marlin_main.cpp 
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
 2014-12-19 17:41:29 -05:00
John Davis f21c65918f Update Servo.h 
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
 2014-12-19 17:20:09 -05:00
John Davis 58c4473bea Update Servo.cpp 
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
 2014-12-19 17:18:55 -05:00
John Davis 825c46024d Update vector_3.cpp 
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
 2014-12-19 17:16:31 -05:00
John Davis cfe80e1def Update vector_3.h 2014-12-19 17:14:35 -05:00
John Davis 7464d3c96a Update ConfigurationStore.cpp 
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
 2014-12-19 17:08:43 -05:00
John Davis 81568c3c6d Update Configuration.h 
Changed Auto Bed Level to Auto Bed Compensation
 2014-12-19 17:06:56 -05:00
Bo Herrmannsen 03e489aaad Merge pull request #1197 from foosel/fix/issue_1147 
Fixes commands not being acknowledged in the same order they are received in
 2014-12-19 14:39:05 +01:00
Gina Häußge acc0e75279 Fixes commands not being acknowledged in the same order they are received 
in

G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.

This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.

Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.

Fixes ErikZalm/Marlin#1147
 2014-12-19 14:20:36 +01:00
daid 17de96ace7 Merge branch 'Marlin_v1' into revert-1154-sd_sorting 
Conflicts:
	Marlin/cardreader.cpp
	Marlin/cardreader.h
 2014-12-18 23:13:50 +01:00
Scott Lahteine 6880e93b75 Happy configs 2014-12-18 14:02:47 -08:00
Scott Lahteine 3b1f186c0c Clean up configs 2014-12-18 13:59:31 -08:00
Scott Lahteine f83d0f2a68 Defines for electronics boards 
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
 2014-12-18 13:59:31 -08:00
Bo Herrmannsen bd25e7393b Merge pull request #1192 from thinkyhead/split_language 
Split up languages.h. Use ISO language codes.
 2014-12-18 22:26:55 +01:00
Bo Herrmannsen 174f8d3631 Added example configs for printers from http://tvrrug.org.uk/ 2014-12-18 20:34:24 +01:00
Scott Lahteine e970461adb Clean up, move unused to the bottom, add headings 2014-12-18 10:33:00 -08:00
Scott Lahteine 0c06e97e98 Split up languages.h, use ISO codes 
Breaking up languages.h makes it easier to translate. Using language
codes makes it easier to select a language and sets the naming standard.
 2014-12-18 09:31:19 -08:00
Bo Herrmannsen a9c334e8bc Merge pull request #1191 from thinkyhead/code_shrink 
Shrink and Optimize
 2014-12-18 17:23:11 +01:00
Bo Herrmannsen 842da54e68 Merge pull request #1187 from thinkyhead/fix_constants 
A few constants where they belong
 2014-12-18 17:21:46 +01:00
Scott Lahteine 07c6b5ab71 Using axis constants 2014-12-18 08:13:08 -08:00
Scott Lahteine 1857e611d3 Other small tweaks 2014-12-18 07:49:16 -08:00
Scott Lahteine 63e1665fa9 Reduce ultralcd.cpp redundancies 2014-12-18 07:30:05 -08:00
Scott Lahteine e69313fc2b Reduce dogm lcd code 2014-12-18 07:03:40 -08:00
Bo Herrmannsen bd22405412 Merge pull request #1190 from thinkyhead/sd_sorting 
Wrap call to flush_presort
 2014-12-18 12:50:55 +01:00
Scott Lahteine 49791949af Wrap call to flush_presort 2014-12-18 03:47:12 -08:00
Scott Lahteine 0450e83fa5 Use SdFatUtil::FreeRam() for freeMemory() if there 2014-12-17 23:26:52 -08:00
Scott Lahteine f21cce0b28 Rebase to Marlin_v1 2014-12-17 23:07:36 -08:00
Scott Lahteine e4b98011cf And one more... 2014-12-17 23:01:24 -08:00
Scott Lahteine 60598b4cdd A few constants where they belong 2014-12-17 23:01:24 -08:00
Bo Herrmannsen 280504e2e0 Merge pull request #908 from alromh87/Marlin_v1 
Support for Gen3 Monolithic electronics
 2014-12-17 22:28:07 +01:00
Bo Herrmannsen 31ca3de72f Merge pull request #819 from neildarlow/Marlin_v1 
Activate LiquidTWI2 device detection and space-pad LCD status line.
 2014-12-17 21:42:53 +01:00
Bo Herrmannsen e83cfc0a62 Merge pull request #1163 from thinkyhead/lcd_abort_message 
LCD "Abort" Message
 2014-12-17 21:30:19 +01:00
Bo Herrmannsen 0b310ab6c5 Merge pull request #1153 from xinfab/negative_values_in_menu 
Negative values in menu
 2014-12-17 20:58:01 +01:00
Bo Herrmannsen 91d740e128 Merge pull request #1141 from filipmu/Filament-Sensor 
Display filament sensor data on a 20x4 LCD or Graphical LCD
 2014-12-17 20:38:30 +01:00
alexborro ab355a90d3 Revert "SD Sort and Buffer" 2014-12-17 14:50:59 -02:00
Scott Lahteine d088b5f30f Remove debug echo 2014-12-13 06:33:12 -08:00
Scott Lahteine 1fad8e6a81 Proper long file name var 2014-12-13 06:17:00 -08:00
Scott Lahteine 29e854c535 Disable SDCARD_SORT_ALPHA by default 
For legacy boards it’s better if this option is disabled.
 2014-12-13 06:12:34 -08:00
Scott Lahteine 6599adc184 Polish up a little... 2014-12-13 06:12:34 -08:00
Scott Lahteine a12eec33e2 Completed SORT_USES_MORE_RAM implementation 
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
 2014-12-13 06:12:34 -08:00
Scott Lahteine c9486ebb85 Improvements, more SORT_USES_MORE_RAM 
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
 2014-12-13 06:12:33 -08:00
Scott Lahteine b6ffea612a Expand on More RAM concept, address minor bugs 2014-12-13 06:10:44 -08:00
Scott Lahteine 8196b36ad9 SD Card Alpha Sorting 
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
 2014-12-13 06:07:52 -08:00
Scott Lahteine cf749dbeda Completed SORT_USES_MORE_RAM implementation 
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
 2014-12-13 06:03:39 -08:00
Scott Lahteine ae081d0fe0 Improvements, more SORT_USES_MORE_RAM 
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
 2014-12-13 06:03:39 -08:00
Scott Lahteine 785143a013 Expand on More RAM concept, address minor bugs 2014-12-13 06:03:39 -08:00
Scott Lahteine 0cbbba08bd SD Card Alpha Sorting 
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
 2014-12-13 06:03:39 -08:00
Scott Lahteine 3ebfd29312 Print a message when printing is aborted 
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
 2014-12-13 06:01:46 -08:00
Martin Prazak 2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 2014-12-07 15:31:46 +00:00
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-12-04 21:09:03 +00:00
Bo Herrmannsen edfcf3b527 Toshiba Stepper Driver support 
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
 2014-12-03 15:01:52 +01:00
Bo Herrmannsen c429a4b3ec Toshiba Stepper Driver support 
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
 2014-12-03 14:37:16 +01:00
nothinman 1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better 
M0/M1 Message Fix
 2014-11-28 16:44:29 +00:00
Scott Lahteine 7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
nothinman 5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better 
M0-M1 Enhancements
 2014-11-28 11:01:24 +00:00
elgambitero 433ac29d31 Updated a bit of spanish language 2014-11-27 22:02:49 +01:00
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine d12b24758a Clear LCD to welcome_msg if not printing 
The welcome message is more appropriate than “resuming print” if
nothing is printing.
 2014-11-26 21:05:11 -08:00
Scott Lahteine 3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine 92e21d3ee2 M0-M1 Enhancements 
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
 2014-11-26 21:05:10 -08:00
Lionello Lunesu 0d35b1d0b8 Allow negative values in menus 2014-11-25 18:34:02 +08:00
Jonas 0d97dec434 Adaption of LCD info screen 
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
 2014-11-12 17:10:48 +01:00
Filip Mulier 3b1ab84536 Display Filament Sensor data on graphic LCD 
Added support to show the filament width on the status line of the
graphic LCD.  The status will show for 5 sec and then switch over to
data.  Status can be seen by clicking the button.
 2014-11-10 21:46:37 -06:00
Filip Mulier d84934d8c5 Display Filament Sensor data on 20x4 LCD 
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD.  The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed.  The status message can be seen by
re-selecting the info screen in the menu.
 2014-11-10 21:43:58 -06:00
Filip Mulier 5c8107bcdd Commented out FILAMENT_SENSOR #define 
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default.  Code does not work on all hardware variants.
 2014-11-09 13:26:02 -06:00
David 377dfb182f Updated example configurations for Delta printers 2014-11-02 21:04:54 +00:00
Neil Darlow b81021f475 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-21 12:06:56 +01:00
Erik van der Zalm 724197454c Merge pull request #1104 from ch100/Marlin_v1 
Fixed typo.
 2014-10-11 23:10:00 +02:00
Erik van der Zalm 058e446531 Merge pull request #1037 from filipmu/Filament-Sensor 
Support for a filament diameter sensor
 2014-10-11 22:56:01 +02:00
Christian Inci 110c5dcf23 Fixed typo. 
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
 2014-10-11 00:25:36 +02:00
Matt Stultz ca30aee903 Fix "add_homeing" to "add_homing" to match changes 2014-10-07 00:16:27 -04:00
Erik van der Zalm 0733825fb1 Merge pull request #1099 from Fourmi/Marlin_v1 
Update line 627 ,wrong number on thermistortables
 2014-10-06 14:36:00 +02:00
Fourmi af3e4d7510 Update line 627 ,wrong number on thermistortables 
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
 2014-10-06 14:21:44 +02:00
Erik van der Zalm aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1 
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
 2014-10-06 13:41:38 +02:00
Erik van der Zalm b360306881 Merge pull request #1073 from WingTangWong/wing-fix-float-delta 
Wing fix float delta
 2014-10-06 13:41:01 +02:00
Erik van der Zalm ce85515428 Merge pull request #1082 from Fourmi/Marlin_v1 
Add thermistor table
 2014-10-06 13:39:36 +02:00
Erik van der Zalm 764921bdbf Merge pull request #1091 from Aldert/patch-1 
Update motion_control.cpp
 2014-10-06 13:37:19 +02:00
Erik van der Zalm c40c7b589b Merge pull request #1095 from thinkyhead/codeclean 
Simple code cleanup. Rename "homeing" to homing.
 2014-10-06 13:36:48 +02:00
Erik van der Zalm 0f2e0525df Merge pull request #1096 from thinkyhead/set-home 
Proposed feature: Set Home Offsets
 2014-10-06 13:36:11 +02:00
Erik van der Zalm 5ae02a361b Merge pull request #1097 from thinkyhead/round-up-xyz 
Adjust the Z display to hide float rounding errors
 2014-10-06 13:35:00 +02:00
Matthew Schick fb34265d75 Make hotend optional when compiling with lcd support 
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
 2014-10-06 00:19:07 -04:00
Scott Lahteine 6e343ef2f0 Adjust the Z display to hide float rounding errors 2014-10-05 18:34:54 -07:00
Scott Lahteine 2f6c57eadc Proposed feature: Set Home Offsets 
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
 2014-10-05 13:35:45 -07:00
Scott Lahteine f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Neil Darlow 6c5a460e65 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-05 12:54:54 +01:00
Aldert d1e4237e1d Update motion_control.cpp 
G03 Full circle did not work (G02 is working correct)
 2014-10-04 09:24:09 +02:00
Fourmi a664763e6f Update thermistortables.h 
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"

Thx
 2014-09-27 09:05:10 +02:00
Fourmi b5dc228a7a Update configuration.h 
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
 2014-09-27 09:02:58 +02:00
Fourmi 3cbb2f56c6 Update configuration.h 
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?

Thx
 2014-09-26 22:01:06 +02:00
Fourmi c35736a140 Update thermistortables.h 
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
 2014-09-26 21:49:07 +02:00
galexander1 cb4a6dd2dc Merge pull request #1065 from oliasmage/Marlin_v1 
Corrected retract() call for use of auto probe without sled enabled.
 2014-09-19 15:12:09 -04:00
Bracken Dawson 01e9b536cb Fix build for non-sled bed auto levelling 
This function should only be used with sled, not all bed auto
levelling.
 2014-09-19 19:42:32 +01:00
Wing Tang Wong 58eabd21fb Added ifndef 2014-09-16 14:31:58 -07:00
Wing Tang Wong 88d12a762a Added #ifndef DELTA wrapper to float delta 2014-09-16 14:29:44 -07:00
alexborro bf0ecedf60 Merge pull request #1051 from fsantini/EZ_fix935 
Fix issue 935: error in matrix calculation
 2014-09-14 21:49:15 -03:00
Javi 40ba644bb4 Added profile for RAMPS with 2 extruders and 1 fan. 
modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h
 2014-09-06 02:53:36 +02:00
Charles Bell 3b8216bdd1 Corrected #endif and ifdef for Z_PROBE_SLED code. 2014-09-04 16:40:22 -04:00
Charles Bell 37799f70ba Corrected retract() call for use of auto probe without sled enabled. 2014-09-04 14:36:39 -04:00
Neil Darlow 1632e5e38a Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-09-04 12:21:35 +01:00
Filip Mulier fe3a09bbcf Correct analog sampling time for additional A to D sample 
Adjusted the  #define PID_dT to reflect 10 A to D sample steps, vs
original 8.
 2014-09-01 06:26:19 -05:00
Gina Häußge 1e9dc85148 Do not use translations for the serial console messages 
The serial protocol has to stay machine readable, without having
to cope with a ton of different human language variants. So
just leave it at the original english version.

Should fix ErikZalm/Marlin#1052
 2014-08-29 18:02:59 +02:00
fsantini cf325ba240 Fix issue 935: error in matrix calculation 2014-08-28 21:10:50 +02:00
Erik van der Zalm 018b68a5c4 Merge pull request #976 from cocktailyogi/SCARA_by_Yogi 
Implemented SCARA-Maths
 2014-08-28 16:32:52 +02:00
Erik van der Zalm dde61d8886 Merge pull request #977 from OskarLinde/Marlin_v1 
Fix lcd itostr3() to handle negative numbers
 2014-08-28 16:31:53 +02:00
Erik van der Zalm 0fbfb1bf82 Merge pull request #991 from bonm014/patch-1 
Leapfrog controller board support
 2014-08-28 16:27:52 +02:00
Erik van der Zalm 8340ca6e05 Merge pull request #992 from Grogyan/patch-1 
temperature.cpp fixes for SD card and MAX6675
 2014-08-28 16:27:14 +02:00
Erik van der Zalm 9887555192 Merge pull request #998 from darconeous/pull-requests/fwretract 
FWRETRACT fixes
 2014-08-28 16:24:51 +02:00
Erik van der Zalm 105571ec68 Merge pull request #1005 from midopple/Marlin_v1 
With option DISABLE_INACTIVE_EXTRUDER the extruder is disable to early
 2014-08-28 16:24:14 +02:00
Erik van der Zalm 68dd5e635e Merge pull request #1024 from oliasmage/Marlin_v1 
Adding Z Probe via sled mounted endstop
 2014-08-28 16:15:54 +02:00
Erik van der Zalm 25069ed4e9 Merge pull request #1031 from Roxy-3DPrintBoard/Z_PROBE_REPEATABILITY-with-correct-Defaults 
Z probe repeatability with correct defaults
 2014-08-28 16:14:10 +02:00
Filip Mulier 75b3a68b65 Revert "Change pinMode to SET_INPUT or SET_OUTPUT" 
This reverts commit 1d0fe035f3.
 2014-08-16 13:26:48 -05:00
Filip Mulier e3c88a5120 Filament sensor changes to config file 
Update the config file for improvements and clarifying what diameter to
use in the slicer software.
 2014-08-16 07:08:09 -05:00
Filip Mulier 62db9848d3 Improvements and bug fixes in sensor delay buffer for filament sensor code 
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision.  Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
 2014-08-16 06:50:13 -05:00
Florian Baumann 5908fd5cec Fix reseting CHDK pin to LOW 
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.

Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
 2014-08-11 14:12:32 +02:00
Roxy-3DPrintBoard 0adbc79571 Fix Default Configuration so Auto Bed Leveling is off 
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
 2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard 0091865583 Z_PROBE_REPEATABILITY test 
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
 2014-08-09 15:37:23 -05:00
Filip Mulier 85649a4549 Real-time filament diameter measurement and control 
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
 2014-08-06 19:30:57 -05:00
Filip Mulier 1d0fe035f3 Change pinMode to SET_INPUT or SET_OUTPUT 
Original code is using WRITE from fastio, but original used pinMode to
set pin direction and did not use the fastio SET_INPUT or SET_OUTPUT.
This caused an issue with the rotary encoder interface to  boards based
on teensyduino, since for teensyduino pin numbers for fastio and the
usual Arduino IO are different.
 2014-08-04 21:44:04 -05:00
Charles Bell e7707aedbc Commented out new #defines in Configuration.h. 2014-08-04 10:18:25 -04:00
Charles Bell 0a8dc0e96b Added documentation to the README.md for the sled Z probe option. CAB 2014-08-04 10:07:43 -04:00
Charles Bell d2fcb3ee56 CAB: Added code for Z-probe with Z endstop mounted on a sled. 2014-08-01 11:29:59 -04:00
Neil Darlow 3cd7dbcc45 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-30 13:01:52 +01:00
daid c13a831ea1 Merge pull request #1017 from foosel/fix/checksum_truncation_bug 
Fix for a wrong checksum truncation for certain commands
 2014-07-24 19:41:34 +02:00
Gina Häußge 2d22902d08 Fix for a wrong checksum truncation for certain commands 
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.

In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.

In case of M117 this caused the last given letter not to be displayed.

This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
 2014-07-24 12:04:02 +02:00
cocktailyogi ad3b770c1a updated examples 2014-07-20 13:55:13 +02:00
cocktailyogi 2f4a20257c imported last Marlin changes 2014-07-20 13:49:26 +02:00
daid aacff0d361 Merge pull request #948 from Dim3nsioneer/Marlin_v1 
Implementation of FW extruder change retract
 2014-07-18 16:10:15 +02:00
midopple 17aa67e4ea If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder. 2014-07-13 21:52:32 +02:00
Robert Quattlebaum 1fd9a7d476 Fix for FWRETRACT on DELTA printers. 
Fixes #817
 2014-07-09 09:24:26 -07:00
Neil Darlow 3f2c771d90 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-07 18:17:15 +01:00
Grogyan bcd039aa81 Update pins.h 2014-07-05 17:55:03 +12:00
Grogyan 82606354dd Update temperature.cpp 
Enables both SD card and MAX6675 to talk with each other
Fixes also issue #750
 2014-07-05 17:17:17 +12:00
bonm014 32a6451ad8 Add leapfrog and dual Y/Z 
I have added the pin set for the leapfrog and the support of dual Y and Z
 2014-07-03 21:15:03 +02:00
bonm014 b5417be109 Update Configuration.h 
Leapfrog added to the board list
 2014-07-03 21:03:22 +02:00
bonm014 f244045245 Update pins.h 
Leapfrog board added to the pin list
 2014-07-03 21:01:41 +02:00
Pablo Clemente 2242a84218 Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965 2014-07-01 16:45:03 +02:00
Neil Darlow 6e3406d228 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-01 10:27:39 +01:00
alexborro 43c298a7a9 Add "Thermal Runaway Protection" feature 
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
 2014-06-30 15:22:49 -03:00
Pablo Clemente d86c3cf43c Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too. 2014-06-30 15:12:13 +02:00
cocktailyogi f0cab611db optimised some math-code 2014-06-24 18:43:36 +02:00
Oskar Linde 269a068032 Fix lcd itostr3() to handle negative numbers 2014-06-24 14:31:15 +02:00
cocktailyogi fae7d08698 fixed wrong compiler-option 2014-06-23 18:16:42 +02:00
cocktailyogi 512f2a3136 restore Branch from Backup 
sorry for that
 2014-06-23 17:09:57 +02:00
Pablo Clemente cd3220d055 Inverted state logic for forced_heating_stop variable 2014-06-13 08:39:58 +02:00
Pablo Clemente 86b4b805d2 Fixed stop print LCD function on M104 2014-06-12 18:43:16 +02:00
Greg Tan 6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 2014-06-08 09:35:04 +08:00
Neil Darlow 9d11b70436 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-06-07 20:48:25 +01:00
Gina Häußge 0de826160e M30 response is missing linefeed, "ok" therefore not on own line 
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
 2014-06-02 17:11:32 +02:00
Dim3nsioneer 3c927901a4 Implementation of FW extruder change retract 
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
 2014-06-02 17:02:10 +02:00
Dim3nsioneer 8a32c5395b renaming the disable inactive extruder feature 2014-06-02 14:07:02 +02:00
Dim3nsioneer 29e7639933 Add switch unused feeder(s) off 
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
 2014-06-02 08:13:09 +02:00
Justin Nesselrotte 07c0eeee99 Fixed a comment in the planner 2014-06-01 19:04:41 -05:00
David Forrest 09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 2014-05-29 17:19:16 -04:00
neildarlow efb6d61413 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-24 13:08:58 +01:00
nothinman 38192cb5f3 Add M112 description to Marlin_main 2014-05-20 15:20:19 +01:00
nothinman aed5ec008a Merge pull request #851 from DanNixon/estop 
Implemented M112
 2014-05-19 17:55:34 +01:00
Erik van der Zalm cfb98ef682 More coverity fixes 2014-05-15 22:09:50 +02:00
zaubara 92e14298b0 Fixes typo for lcd backlighting on I2C PCF8575 
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
 2014-05-15 01:37:23 +02:00
Erik van der Zalm 9db9842aea Fixed error found by the free coverity tool (https://scan.coverity.com/) 
===================================================
Hi,

Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.

Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)

** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()

** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()

** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()

** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()

** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()

** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()

** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()

** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()

** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()

** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()

** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()

** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()

** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

________________________________________________________________________________________________________
*** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148                 }
2149               #endif
2150             }
2151           }
2152           break;
2153         case 85: // M85
   CID 59629:  Unchecked return value  (CHECKED_RETURN)
   Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154           code_seen('S');
2155           max_inactive_time = code_value() * 1000;
2156           break;
2157         case 92: // M92
2158           for(int8_t i=0; i < NUM_AXIS; i++)
2159           {

________________________________________________________________________________________________________
*** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313         else
314         {
315           // two choices for the 16 bit timers: ck/1 or ck/64
316           ocr = F_CPU / frequency / 2 - 1;
317
318           prescalarbits = 0b001;
   CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
   "ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319           if (ocr > 0xffff)
320           {
321             ocr = F_CPU / frequency / 2 / 64 - 1;
322             prescalarbits = 0b011;
323           }
324

________________________________________________________________________________________________________
*** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181         case 2: // G2  - CW ARC
1182           if(Stopped == false) {
1183             get_arc_coordinates();
1184             prepare_arc_move(true);
1185             return;
1186           }
   CID 59631:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }

________________________________________________________________________________________________________
*** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }
   CID 59632:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1193         case 4: // G4 dwell
1194           LCD_MESSAGEPGM(MSG_DWELL);
1195           codenum = 0;
1196           if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197           if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198

________________________________________________________________________________________________________
*** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913         target_temperature[1]=0;
   CID 59633:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif
919

________________________________________________________________________________________________________
*** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907        #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
   CID 59634:  Out-of-bounds write  (OVERRUN)
   Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913         target_temperature[1]=0;
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif

________________________________________________________________________________________________________
*** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
   CID 59635:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626         for (i=1; i<heater_ttbllen_map[e]; i++)
627         {
628           if (PGM_RD_W((*tt)[i][0]) > raw)
629           {
630             celsius = PGM_RD_W((*tt)[i-1][1]) +
631               (raw - PGM_RD_W((*tt)[i-1][0])) *

________________________________________________________________________________________________________
*** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614         if (e == 0)
615         {
616           return 0.25 * raw;
617         }
618       #endif
619
   CID 59636:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625

________________________________________________________________________________________________________
*** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196       {
197          soft_pwm_bed = (MAX_BED_POWER)/2;
198          bias = d = (MAX_BED_POWER)/2;
199        }
200        else
201        {
   CID 59637:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202          soft_pwm[extruder] = (PID_MAX)/2;
203          bias = d = (PID_MAX)/2;
204       }
205
206
207

________________________________________________________________________________________________________
*** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209      for(;;) {
210
211         if(temp_meas_ready == true) { // temp sample ready
212           updateTemperaturesFromRawValues();
213
   CID 59638:  Out-of-bounds read  (OVERRUN)
   Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214           input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216           max=max(max,input);
217           min=min(min,input);
218           if(heating == true && input > temp) {
219             if(millis() - t2 > 5000) {

________________________________________________________________________________________________________
*** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272               tmp_extruder = code_value();
2273               if(tmp_extruder >= EXTRUDERS) {
2274                 SERIAL_ECHO_START;
2275                 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276               }
2277             }
   CID 59639:  Out-of-bounds write  (OVERRUN)
   Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278             volumetric_multiplier[tmp_extruder] = 1 / area;
2279           }
2280           break;
2281         case 201: // M201
2282           for(int8_t i=0; i < NUM_AXIS; i++)
2283           {

________________________________________________________________________________________________________
*** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796             int pin_status = code_value();
1797             int pin_number = LED_PIN;
1798             if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799               pin_number = code_value();
1800             for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801             {
   CID 59640:  Out-of-bounds read  (OVERRUN)
   Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802               if (sensitive_pins[i] == pin_number)
1803               {
1804                 pin_number = -1;
1805                 break;
1806               }
1807             }

________________________________________________________________________________________________________
*** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51     }
52
53     void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54     			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55     			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56     {

________________________________________________________________________________________________________
*** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39     }
40
41     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43     {
44       init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);

________________________________________________________________________________________________________
*** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30     {
31       init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
   CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32     }
33
34     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37     {

________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
 2014-05-14 21:59:48 +02:00
Neil Darlow e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
Alejandro Romero 1c9a70cee9 Support for Gen3 Monolithic electronics 
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
 2014-05-06 19:24:20 -05:00