6153 commits

Author	SHA1	Message	Date
Alexander Gee	7a9bb6bc86	Remove old M73 / SD comment (#17928)	2020-05-09 23:35:26 -05:00
Brais Fortes	37f86d9e08	Update Galician language (#17929)	2020-05-09 23:26:06 -05:00
Jason Smith	209fd2d0cb	Fix SERIAL_ECHO forever bug (#17932)	2020-05-09 23:25:18 -05:00
Jason Smith	2af270ca42	Fix M115_GEOMETRY_REPORT extra commas (#17933)	2020-05-09 23:24:15 -05:00
thinkyhead	60be3b19be	[cron] Bump distribution date (2020-05-10)	2020-05-10 00:03:47 +00:00
thinkyhead	a95a60c7ea	[cron] Bump distribution date (2020-05-09)	2020-05-09 00:07:15 +00:00
Bob Kuhn	8f3d17699a	Init all ESP01 (module) WIFI pins (#17679)	2020-05-08 02:43:53 -05:00
Tanguy Pruvot	8fd3af0c79	Fix UBL mesh edit grid display (#17897)	2020-05-08 01:26:33 -05:00
George Fu	34a2fd7b09	DGUS minor fixups (#17901)	2020-05-08 01:24:27 -05:00
Jason Smith	a2153c15ee	Add TMC driver HW serial defines (#17909)	2020-05-08 01:15:12 -05:00
thinkyhead	c262b9c5a3	[cron] Bump distribution date (2020-05-08)	2020-05-08 00:03:24 +00:00
Scott Lahteine	6be76af617	Overrideable CASE_LIGHT_PIN	2020-05-07 14:57:41 -05:00
thinkyhead	10e875cd79	[cron] Bump distribution date (2020-05-07)	2020-05-07 00:03:32 +00:00
Gurmeet Athwal	6947dc139e	Fix M503 output formatting (#17893)	2020-05-06 03:40:04 -05:00
Scott Lahteine	7c26a54d3f	Fix, clarify LCD_TIMEOUT_TO_STATUS ... Replaces #17887 Co-Authored-By: Daniel Callander <knifa@users.noreply.github.com>	2020-05-06 03:34:39 -05:00
Scott Lahteine	1aa9d44783	Format some pins	2020-05-06 01:40:40 -05:00
Gustavo Alvarez	0332666d38	Fix Cheetah pins alias (#17882)	2020-05-06 01:16:32 -05:00
Scott Lahteine	544b16639e	Fix poll_runout_states bug	2020-05-06 01:15:13 -05:00
Gurmeet Athwal	a4c981469e	Extended reporting options (#16741)	2020-05-05 23:34:04 -05:00
Giuliano Zaro	7a03c5a0c6	Update Italian language (#17888)	2020-05-05 19:20:02 -05:00
thinkyhead	9df7992de8	[cron] Bump distribution date (2020-05-06)	2020-05-06 00:03:27 +00:00
Scott Lahteine	39f703310b	Move S_FMT to HAL, apply to mixer	2020-05-05 18:12:36 -05:00
Scott Lahteine	7a2cc782b4	Clean up planner modifier methods	2020-05-05 15:38:48 -05:00
Scott Lahteine	852a8d6685	Configurable kill pin state ... Co-Authored-By: AbdullahGheith <abdullahgheith@users.noreply.github.com>	2020-05-05 03:31:15 -05:00
Gustavo Alvarez	3fd8ef52c5	More FTDI EVE fixes (RAMPS, Cheetah) (#17759)	2020-05-05 02:38:06 -05:00
Scott Lahteine	973a6990b5	Trailing whitespace	2020-05-05 01:24:35 -05:00
Scott Lahteine	eeabe66fc4	Some distinct E helpers	2020-05-05 00:52:45 -05:00
Scott Lahteine	39263efef7	Allow more serial parameters	2020-05-04 23:46:38 -05:00
Scott Lahteine	90e1035e9b	Define max_e_jerk as array always	2020-05-04 23:10:23 -05:00
Scott Lahteine	97e47b4494	Wrap some macros	2020-05-04 23:08:15 -05:00
Scott Lahteine	65104b7d78	Whitespace, M200 test label	2020-05-04 19:26:46 -05:00
Scott Lahteine	bab37dcfae	Add templated j_move_axis	2020-05-04 19:26:46 -05:00
thinkyhead	7655620fd0	[cron] Bump distribution date (2020-05-05)	2020-05-05 00:03:45 +00:00
Scott Lahteine	c55475e8e7	Fix and combine JD condition	2020-05-04 19:02:08 -05:00
Mathias Rasmussen	d571a4d389	Relax bed cooling safety check (#17877)	2020-05-04 17:23:35 -05:00
Marcio T	98196673aa	Fix setStatusMessage calls (#17879)	2020-05-04 17:19:49 -05:00
Scott Lahteine	9fe781ccaf	Tweak powerloss info	2020-05-04 16:37:27 -05:00
Scott Lahteine	b8947ac8a5	More explicit junction/jerk math	2020-05-04 16:13:10 -05:00
Scott Lahteine	2efe28ca59	Minor conditional clean	2020-05-04 16:11:36 -05:00
randellhodges	4c4be32ad7	LPC176x requires USE_SHARED_EEPROM (#17858)	2020-05-04 14:54:33 -05:00
Štěpán Dalecký	ebe8f2c605	Fix acosx condition (#17846)	2020-05-04 14:39:51 -05:00
Scott Lahteine	38d1587091	Malyan M200 V2 (#17840)	2020-05-04 14:37:43 -05:00
mojocorp	1c32f10039	Fix Malyan LCD crash bug (#17855)	2020-05-04 14:03:01 -05:00
Marcio T	2a959cde6f	Fix undefined/unused, Touch UI (#17874)	2020-05-04 13:57:12 -05:00
thinkyhead	5e23fd6ef1	[cron] Bump distribution date (2020-05-04)	2020-05-04 00:03:16 +00:00
Scott Lahteine	9a6934874a	Add XYZ_NO_FRAME option	2020-05-03 01:24:39 -05:00
studiodyne	36efe75ad1	Followup for Tool Migration (#17800)	2020-05-03 00:32:25 -05:00
Štěpán Dalecký	0c68794fa9	Improve JD acosx implementation (#17817)	2020-05-02 23:59:09 -05:00
studiodyne	9a4a768ee3	Fix frequency limit editing (#17763)	2020-05-02 22:21:40 -05:00
Stephan	120fcd1215	Support GT2560 3rd extruder (#17797)	2020-05-02 22:19:05 -05:00
animavitis	3ea1c8a6fa	Support for Ortur 4.3 mainboard (#17790)	2020-05-02 22:12:52 -05:00
Scott Lahteine	6b3ed0f320	Cleanup in language.h	2020-05-02 21:32:36 -05:00
thinkyhead	ef02358378	[cron] Bump distribution date (2020-05-03)	2020-05-03 00:06:47 +00:00
Axel	7613383e7b	Add Rostock 301 thermistors (22, 23) (#17806)	2020-05-02 18:45:54 -05:00
Dipl.-Ing. Raoul Rubien, BSc	cba4c5a756	Fix missing var for DGUS_LCD_UI_ORIGIN (#17819)	2020-05-02 18:32:01 -05:00
Dipl.-Ing. Raoul Rubien, BSc	739b738e7f	Permit more Creality pin overrides (#17820)	2020-05-02 18:30:23 -05:00
Eric Ptak	8d425c6720	Fix missing ProbeTempComp refs (#17833)	2020-05-02 18:27:18 -05:00
Marcio T	db32af9171	Fix ExtUI + Archim compile, typos (#17825)	2020-05-02 17:30:51 -05:00
Jason Smith	208af8cb15	Fix STM32 + SoftwareSerial compile (#17831)	2020-05-02 17:24:51 -05:00
Scott Lahteine	52f3f3b5ab	Fix motor current array	2020-05-02 17:00:12 -05:00
Gurmeet Athwal	9381a76d75	Add Cap:LONG_FILENAME (#17821)	2020-05-02 16:19:40 -05:00
Mathias Gartner	288447d01e	Fix XYZ types multiplication/division (#17826)	2020-05-02 16:15:49 -05:00
mojocorp	93946c2868	Fix ExtUI compile (#17834)	2020-05-02 16:13:14 -05:00
Scott Lahteine	9b7807d40f	Clean up M122 code	2020-05-02 15:39:38 -05:00
thinkyhead	dcd02284be	[cron] Bump distribution date (2020-05-02)	2020-05-02 00:03:28 +00:00
Scott Lahteine	2e21c72542	Add ExtUI mesh items for Malyan LCD ... Fixes #17429	2020-05-01 00:52:46 -05:00
Scott Lahteine	2107bc5836	Clean up EEPROM interfaces (#17803)	2020-05-01 00:04:55 -05:00
Scott Lahteine	a226b281af	UI and stall reset for extra TMC axes (#17818)	2020-04-30 22:52:33 -05:00
Scott Lahteine	6edc2c3690	Fix eeprom init glitch	2020-04-30 22:50:05 -05:00
J.C. Nelson	b4aebbe78d	Allow STM32 pins to specify timers (#17805) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-30 22:42:40 -05:00
Scott Lahteine	76bc7bf7b8	Pre-clean DUE flash eeprom code	2020-04-30 22:10:46 -05:00
Scott Lahteine	306578d7be	More explicit LPC timer defines	2020-04-30 19:31:49 -05:00
thinkyhead	3efbe9a1c4	[cron] Bump distribution date (2020-05-01)	2020-05-01 00:03:30 +00:00
Giuliano Zaro	0b762189b4	Change RAMPS default filament runout pin (#17814)	2020-04-30 18:18:23 -05:00
Scott Lahteine	9b820d71a6	Remove QSPI from "wired" EEPROM type	2020-04-30 18:16:10 -05:00
Giuliano Zaro	bd8436d1c5	Fix SAMD51 i2c EEPROM (#17815) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-30 18:14:49 -05:00
Scott Lahteine	7f5730ea3b	Minimal interface for F4/F7 flash	2020-04-30 18:00:42 -05:00
Scott Lahteine	3c080ee3e6	Cleanup, comment "wired" eeproms	2020-04-30 18:00:42 -05:00
Scott Lahteine	a521b0edbb	Strip never-used eeprom functions	2020-04-30 17:25:27 -05:00
Scott Lahteine	b335c38162	Drop extra Marduino includes	2020-04-30 17:25:27 -05:00
thinkyhead	391f7fd742	[cron] Bump distribution date (2020-04-30)	2020-04-30 00:03:19 +00:00
Scott Lahteine	e8b0796fc7	Revert menu_item_if ahead of refactor	2020-04-29 15:06:38 -05:00
Scott Lahteine	c26725c5a0	L64XX can use hardStop for M17 ... See #17794	2020-04-29 15:06:19 -05:00
Scott Lahteine	5e6faa999d	Refine EEPROM types / flags (#17772)	2020-04-29 14:46:33 -05:00
Scott Lahteine	2d758663db	G12 E soft endstops parameter (#17788)	2020-04-29 03:25:35 -05:00
ellensp	36adbfa41c	Fix MKS S-Gen standard pins (#17786) ... Fixes #17783	2020-04-29 03:16:13 -05:00
Scott Lahteine	ef43520d56	Disambiguate i2c calls	2020-04-29 03:13:50 -05:00
Scott Lahteine	2fbce22910	Cleanup followup	2020-04-29 01:47:41 -05:00
thinkyhead	7b0891b3fa	[cron] Bump distribution date (2020-04-29)	2020-04-29 00:20:13 +00:00
Scott Lahteine	3d3d2a923b	Cleanup with updated macros	2020-04-28 19:18:14 -05:00
Scott Lahteine	f03f76ecfb	Fix info menu without leveling ... Fixes #17664	2020-04-28 19:18:14 -05:00
Scott Lahteine	1d714512f0	Fix undefined Z stall	2020-04-28 19:18:14 -05:00
Scott Lahteine	bd82b8bc7e	Suppress compile warnings	2020-04-28 08:34:07 -05:00
Scott Lahteine	4b35ff1f07	STEPPER_TIMER_RATE might call a function	2020-04-28 07:53:51 -05:00
Scott Lahteine	56e3106b63	Clean up whitespace	2020-04-28 07:53:04 -05:00
Scott Lahteine	2c959123e5	Clean up whitespace	2020-04-28 06:09:52 -05:00
randellhodges	5f7a75979f	LPC176x SPI / I2C PersistentStore (#17651)	2020-04-28 02:27:55 -05:00
Neil van Geffen	7c3909bc3f	Save/Load distinct TMC SG thresholds (#17741)	2020-04-28 01:22:03 -05:00
Marcio T	07a6bf9b84	Enhance and fix FTDI EVE Touch UI (#17755) ... - Stop print and play error sound if USB drive is removed. - Allow configuration of version string in touch UI. - Print a completion message in the bed mesh leveling screen. - Don't play redundant sound at the start of a print. - Clicking on percentage in status screen now goes into print speed screen - Clicking on axis in status screen now goes to nozzle motion screens - Use default increment of 100 when nozzle is preheated in temp screen, 10 otherwise - Fixed grayed out change filament button in tune menu - Eliminated code duplication in tune menu - Add button for resetting BLTouch to advanced settings menu	2020-04-28 00:31:05 -05:00
Scott Lahteine	0eeb5e2a29	General cleanup: pause, MarlinCore	2020-04-28 00:22:04 -05:00
studiodyne	89b17b5463	Followup fixes for singlenozzle, etc. (#17712)	2020-04-28 00:21:23 -05:00
Scott Lahteine	4f003fc7a7	Streamline menu item logic (#17664)	2020-04-27 23:52:11 -05:00
Jason Smith	f709c565a1	STM32F1: SD EEPROM fallback (#17715)	2020-04-27 23:45:20 -05:00
FilippoR	9fa5119333	Block during move in UBL mesh edit (#17670)	2020-04-27 23:35:10 -05:00
Scott Lahteine	630b4ecfff	Patch XY frequency menu	2020-04-27 23:31:17 -05:00
Marcio T	919e53a5d4	Fix: SD pause broken with PARK_HEAD_ON_PAUSE (#17754)	2020-04-27 22:43:42 -05:00
Scott Lahteine	01c646a892	Apply more HAS_HOTEND	2020-04-27 22:39:31 -05:00
Scott Lahteine	94291eb59f	Clean up old externs / includes	2020-04-27 22:39:31 -05:00
Scott Lahteine	f6e820b4e9	Fix buffer stuff	2020-04-27 22:39:30 -05:00
thinkyhead	cd2652b2fc	[cron] Bump distribution date (2020-04-28)	2020-04-28 00:17:17 +00:00
Scott Lahteine	66676e6dd4	Remove extra macro	2020-04-27 10:19:37 -05:00
RudolphRiedel	0b3a96412c	Fixes for ExtUI / EVE (#17726)	2020-04-27 10:14:42 -05:00
Scott Lahteine	035d6cd16d	Patch i2c, info menu	2020-04-27 09:50:10 -05:00
grauerfuchs	9b90dfaa48	Fix draw_temps missing define compile (#17750)	2020-04-27 09:26:45 -05:00
Scott Lahteine	267c25fd53	Remove spurious brace ... Followup to c536b8de62	2020-04-27 09:06:56 -05:00
Warboy1982	7eac76d31b	Patch BLTouch Z_MAX_PIN for GT2560 Rev.A (non-plus) (#17721)	2020-04-27 08:38:23 -05:00
Neil van Geffen	c56b66543d	Permit Stall Sensitivity of 0 (#17722)	2020-04-27 08:27:14 -05:00
Scott Lahteine	37176ed2b9	Apply maxtemp patch	2020-04-27 08:17:59 -05:00
Martin	0777e391be	Add M115 Cap:BABYSTEPPING (#17691)	2020-04-27 07:31:48 -05:00
Scott Lahteine	5507b6073c	Fix dummy thermistors ... Fixes #17422 Co-Authored-By: Moeschus <moeschus@users.noreply.github.com>	2020-04-27 06:35:02 -05:00
Scott Lahteine	c536b8de62	Apply ternary macros	2020-04-27 06:30:28 -05:00
Scott Lahteine	967c1d8534	Do SD sort order in CardReader	2020-04-27 06:30:28 -05:00
Scott Lahteine	fc98383659	Update home bump assert	2020-04-27 06:29:09 -05:00
Scott Lahteine	fec416f9db	LCD preheat followup	2020-04-27 06:29:09 -05:00
studiodyne	5ae45bab18	Adjustable XY_FREQUENCY_LIMIT (#17583)	2020-04-27 05:59:52 -05:00
InsanityAutomation	65daf3ba40	Fix G12 for SINGLENOZZLE (#17540) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-27 05:22:06 -05:00
ellensp	c7f9eb7b21	Allow M42 M with other parameters (#17744)	2020-04-27 05:16:47 -05:00
Jason Smith	8f7f7f7c45	Apply missed const& SPI optimization (#17734) ... Followup to eebb68cd7f	2020-04-27 05:13:47 -05:00
Scott Lahteine	c4d57462dc	Apply HAS_MULTI_HOTEND	2020-04-27 05:10:47 -05:00
Scott Lahteine	33217b0dd0	Add HOTEND_OVERSHOOT	2020-04-27 05:07:08 -05:00
Scott Lahteine	8b3c7dda75	Add HAS_FAN and others	2020-04-27 05:07:08 -05:00
Scott Lahteine	3d45a4bd23	Encapsulate Temperature items	2020-04-27 05:07:08 -05:00
Scott Lahteine	011ecc341a	Fix I2C_ADDRESS ambiguity	2020-04-27 05:07:08 -05:00
Scott Lahteine	e1ad955897	Revert EEPROM tweak	2020-04-27 05:07:08 -05:00
Gurmeet Athwal	8f86f7c601	Add Cap:SDCARD to M115 (#17208)	2020-04-26 20:55:14 -05:00
thinkyhead	3bee705feb	[cron] Bump distribution date (2020-04-27)	2020-04-27 00:03:28 +00:00
Scott Lahteine	ef74ca60c0	Fix unwarm regData index	2020-04-26 03:11:28 -05:00
Scott Lahteine	eebb68cd7f	SPI performance tweak	2020-04-26 03:11:28 -05:00
Scott Lahteine	4ed912eb23	Misc. patches	2020-04-25 22:10:19 -05:00
Toni	21067ab062	Add Prusa MMU2S settings - beta (#17523)	2020-04-25 21:07:21 -05:00
thisiskeithb	02a054cda4	HOME_BEFORE_FILAMENT_CHANGE on any axis unknown (#17681)	2020-04-25 20:56:54 -05:00
Axel	1752cd4fe5	Add a Mightyboard pin (#17538) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-25 20:03:16 -05:00
thinkyhead	4895546238	[cron] Bump distribution date (2020-04-26)	2020-04-26 00:15:43 +00:00
Scott Lahteine	f907de272a	Fix mesh point sign ... Most obvious part of #17670 Co-Authored-By: FilippoR <filippo.rossoni@gmail.com>	2020-04-25 16:50:05 -05:00
ellensp	75c17c7a67	Include echo: with M503 output (#17665)	2020-04-25 13:29:30 -05:00
studiodyne	28518c2352	Save/Restore leveling on toolchange for singlenozzle too (#17682)	2020-04-25 12:20:42 -05:00
Scott Lahteine	aa832a05c7	Use MCP4451 interface for MKS SBASE ... Followup to #17536	2020-04-25 12:02:16 -05:00
Gustavo Alvarez	11f7695907	Touch UI FTDI EVE is now beta (#17704)	2020-04-25 11:47:19 -05:00
randellhodges	b700b3cde6	Fix M261, i2c EEPROM, i2c Encoder for LPC (#17678) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-25 11:35:35 -05:00
Scott Lahteine	307c48fe0a	Parity between LPC176x pins	2020-04-25 11:25:05 -05:00
Giuliano Zaro	4d3a2bd22c	Clean up filament change menu (#17702) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-25 10:56:56 -05:00
Giuliano Zaro	be7e04056f	Update Italian language (#17707)	2020-04-25 10:44:46 -05:00
studiodyne	58ac9f257c	NOZZLE_PARK_FEATURE - X/Y only axis move (#17697)	2020-04-25 10:42:34 -05:00
Ondřej Nový	d2a5d51f69	Add NOZZLE_PARK_Z_RAISE_MIN (#17624)	2020-04-24 22:39:08 -05:00
Scott Lahteine	3a27933ae7	Fixes for FYSETC Touch EVE 5" on AVR (#17659) ... Co-Authored-By: RudolphRiedel <rudolphriedel@users.noreply.github.com> Co-authored-by: sL1pKn07 <sl1pkn07@gmail.com>	2020-04-24 22:35:46 -05:00
Giuliano Zaro	d7f90c36df	Fix SAMD51 Step Timer (#17692)	2020-04-24 22:27:58 -05:00
Gustavo Alvarez	4af83430b5	ReARM SDSS pin for RRD LCDs (#17698)	2020-04-24 22:20:24 -05:00
Giuliano Zaro	75b91550f3	Update Italian language (#17695)	2020-04-24 22:16:47 -05:00
Scott Lahteine	e25402b541	Apply TERN	2020-04-24 21:00:42 -05:00
thinkyhead	94dd9ce73d	[cron] Bump distribution date (2020-04-25)	2020-04-25 00:03:26 +00:00
Scott Lahteine	cf8c14b1b0	ExtUI allow small JD mm	2020-04-24 17:41:35 -05:00
Scott Lahteine	2efbca5535	Composite test followup ... See ab2b98e425	2020-04-23 22:46:53 -05:00
Scott Lahteine	ab2b98e425	Apply composite tests	2020-04-23 21:53:52 -05:00
Scott Lahteine	55d66fb897	Add HAS_JUNCTION_DEVIATION	2020-04-23 21:53:51 -05:00
thinkyhead	b151feb31e	[cron] Bump distribution date (2020-04-24)	2020-04-24 00:03:19 +00:00
Scott Lahteine	44b71103df	Patch tool_change typo	2020-04-23 16:19:57 -05:00
Scott Lahteine	69f211cf78	Add empty ui.completion_feedback	2020-04-23 15:17:25 -05:00
Scott Lahteine	239c45dc11	German language followup	2020-04-23 15:17:25 -05:00
Scott Lahteine	d5b791a26a	Fix Malyan ExtUI parse_lcd_byte ... See https://community.platformio.org/t/marlin-compile-fail-board-board-h-no-such-file-or-directory/11843/43	2020-04-22 22:07:38 -05:00
studiodyne	2f6262c27b	Automatic Tool Migration feature (#17248)	2020-04-22 21:03:28 -05:00
thinkyhead	4dce03fa42	[cron] Bump distribution date (2020-04-23)	2020-04-23 00:03:05 +00:00
Scott Lahteine	e222ba4c81	Prevent DUE / Spindle conflict ... Fixes #17449	2020-04-22 18:54:13 -05:00
Scott Lahteine	19873f04d4	Fix M100 compile warning	2020-04-22 18:53:40 -05:00
RudolphRiedel	f263787f07	Fix ExtUI 0<brightness<12 (#17644) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-22 16:47:29 -05:00
Ondřej Nový	468b813bc1	Better ooze prevention during pause (#17625)	2020-04-22 16:43:06 -05:00
Scott Lahteine	6d90d1e1f5	Apply TERN to compact code (#17619)	2020-04-22 16:35:03 -05:00
Bob Kuhn	88bdd26c99	Clean up SKR Pro v1.1 pins (#17653)	2020-04-22 15:04:21 -05:00
Flo082002	fd453d23b9	Update German language (#17591)	2020-04-22 15:01:19 -05:00
Bob Kuhn	33bb7859d4	Composite USB for STM32 SDIO (experimental) (#17222)	2020-04-22 15:00:10 -05:00
Scott Lahteine	5a5be7e287	Reorder setup, with serial early	2020-04-21 21:38:21 -05:00
Scott Lahteine	0fec478562	Wrangle HAL EEPROM types	2020-04-21 21:33:13 -05:00
Scott Lahteine	d666ef00e0	Prevent 'I2C_EEPROM' on LPC176x	2020-04-21 21:33:13 -05:00
thinkyhead	1563d128d8	[cron] Bump distribution date (2020-04-22)	2020-04-22 00:03:05 +00:00
Scott Lahteine	d34c22ac22	Skip redundant file/dir tests	2020-04-21 18:39:43 -05:00
Scott Lahteine	c3946dd017	Add a warning on LA + S-Curve	2020-04-21 18:39:43 -05:00
Scott Lahteine	5de87361e9	Call first_load from manage_media	2020-04-21 18:39:43 -05:00
Scott Lahteine	d96c769fd6	Move Power Loss Recovery check	2020-04-21 15:27:53 -05:00
Scott Lahteine	2ae00db43e	Move G26 heading up	2020-04-21 15:27:53 -05:00
Scott Lahteine	a5b2e3e63c	Fix Mixer::reset_vtools bug ... Fixes #17635	2020-04-21 13:07:56 -05:00
thinkyhead	eb91dbce42	[cron] Bump distribution date (2020-04-21)	2020-04-21 00:03:16 +00:00
Ondřej Nový	abd42e5dea	Fix M125 unretract length (#17623)	2020-04-20 11:32:21 -05:00
Scott Lahteine	000ec9fc13	Ensure language.h include order ... See #17604	2020-04-20 09:43:48 -05:00
Mathias Rasmussen	875cd4e081	Remove 'Media Released' message (#17272) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-20 09:17:55 -05:00
Fabio Santos	ccfd5c1010	Trinamic steppers Homing Phase (#17299)	2020-04-20 08:08:00 -05:00
Jason Smith	cba58b1027	Fix "possible buffer overrun" warning (#17513)	2020-04-20 07:16:38 -05:00
Roman Moravčík	90a432279b	Update Slovak language (#17588)	2020-04-20 07:13:33 -05:00
Zs.Antal	9338fb87e9	Update Hungarian language (#17593)	2020-04-20 07:13:04 -05:00
Thomas Hollstegge	b55dd2cb82	Fix low contrast on Minipanel display (#17601)	2020-04-20 07:07:23 -05:00
Ondřej Nový	f779d1be3f	HD44780 mapping for Czech accents (#17603)	2020-04-20 07:05:58 -05:00
RudolphRiedel	27f0f10590	Ensure brightness > 0 in ExtUI (#17611)	2020-04-20 07:03:00 -05:00
Ondřej Nový	1af6a6d4f9	Update Language fonts (#17620)	2020-04-20 06:55:55 -05:00
Ondřej Nový	a0d0ce464e	Sanity-check nozzle park point (#17621)	2020-04-20 06:54:24 -05:00
Scott Lahteine	15f6f53638	Add HAS_HOTEND, etc.	2020-04-20 00:12:22 -05:00
Scott Lahteine	5d0deba938	Longer default power-up delay ... See MarlinFirmware/Configurations#78	2020-04-20 00:12:22 -05:00
Scott Lahteine	78fe411c7d	Include swt_init in log	2020-04-20 00:12:21 -05:00
thinkyhead	776d7761d9	[cron] Bump distribution date (2020-04-20)	2020-04-20 00:03:17 +00:00
Scott Lahteine	1bbd77646e	Clean up language files	2020-04-19 02:37:44 -05:00
Scott Lahteine	87875e0de8	Fix mixing with "unload all" compile	2020-04-19 02:10:02 -05:00
Scott Lahteine	ad7a6e10a7	Fix no-bed compile error	2020-04-19 00:57:29 -05:00
grauerfuchs	4a5a3d27ed	Option to use raw digipot values (#17536)	2020-04-18 22:56:23 -05:00
thinkyhead	8e8ba46cb6	[cron] Bump distribution date (2020-04-19)	2020-04-19 00:03:26 +00:00
Scott Lahteine	8ad056013c	Define "resolution" in bits	2020-04-17 22:33:15 -05:00
thinkyhead	a12b021733	[cron] Bump distribution date (2020-04-18)	2020-04-18 00:03:23 +00:00
studiodyne	50fa87f1cf	Proportional Autotemp followup (#17585) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-17 11:19:31 -05:00
Scott Lahteine	3a42b6c5c6	Patch M425 for CAN_CALIBRATE ... Fixes #17430	2020-04-17 10:24:27 -05:00
Scott Lahteine	f94ab84dac	Malyan M300 support (#17421)	2020-04-17 09:10:41 -05:00
djessup	360e07c90f	Add USE_PROBE_FOR_Z_HOMING option (#17359)	2020-04-17 09:02:21 -05:00
George Fu	a794538c54	Homing backoff enhancements ... - Define homing bump as an array - Add pre and post homing backoff options - Consolidate homing config options	2020-04-17 08:52:41 -05:00
George Fu	cbf349b5eb	Fix some DGUS bugs ... - No action on first click of the move button	2020-04-17 08:52:41 -05:00
Gustavo Alvarez	e7f3b625b0	Use 'melzi' envs for MELZI_CREALITY (#17578)	2020-04-17 07:19:47 -05:00
Scott Lahteine	880f73d471	Minor cleanup	2020-04-17 04:35:00 -05:00
XDA-Bam	bbe2cb75ad	More accurate Junction Deviation fast-acos (#17575)	2020-04-16 21:51:05 -05:00
thinkyhead	927e29b93e	[cron] Bump distribution date (2020-04-17)	2020-04-17 00:05:52 +00:00
Tanguy Pruvot	3210155ab7	Update French language (#17577)	2020-04-16 19:04:43 -05:00
studiodyne	9110f756ad	AUTOTEMP default proportions (#17560)	2020-04-16 19:03:53 -05:00
Davide Toldo	720795ac7d	More verbose probing error (#17482)	2020-04-16 16:22:37 -05:00
Scott Lahteine	847ea583f6	STM32F103VE has 512K Flash EEPROM (#17565)	2020-04-16 15:34:44 -05:00
InsanityAutomation	d353d67a34	SD detect override for older Creality3D RAMPS (#17469)	2020-04-16 04:41:05 -05:00
Giuliano Zaro	f5577b320b	Update Italian language (#17467)	2020-04-16 04:39:01 -05:00
Giuliano Zaro	c16818b261	Fix SAMD51 timer usage (#17471)	2020-04-16 04:38:17 -05:00
Zs.Antal	78a5079558	Add Hungarian language (#17491) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-16 04:11:42 -05:00
Bob Kuhn	f5d809f366	SKR Pro 1.1 WiFi and LCD SD card support (#17531)	2020-04-16 03:55:33 -05:00
dandantsui	d194688020	Define EEPROM, SD type for MKS Robin nano (#17498)	2020-04-16 03:53:58 -05:00
android444	0f0b1aff55	Update GLCD Silvergate display timing (#17518)	2020-04-16 03:41:27 -05:00
android444	0ce532547a	Update Polish language (#17525)	2020-04-16 03:40:17 -05:00
Scott Lahteine	d8b8d88276	Move setup logging to the top	2020-04-16 03:37:00 -05:00
Scott Lahteine	1c43870cec	Add chamber to sensitive pins	2020-04-16 03:31:44 -05:00
Scott Lahteine	03020dd31e	Use the common pattern for auto fan pins ... Now that pins.h is guaranteed included after configs.	2020-04-16 03:31:44 -05:00
Scott Lahteine	3a9f8a00bf	Fix SD connection for some boards	2020-04-16 03:31:44 -05:00
Scott Lahteine	880f63b008	It looks like HAS_ONBOARD_SD is obsolete	2020-04-16 03:31:44 -05:00
mks-viva	bc856fd8ec	MKS Robin E3 / E3D support (#17569) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-16 01:19:24 -05:00
Desuuuu	2824e67d95	Add ExtUI::onStatusChanged_P (#17543)	2020-04-16 00:33:31 -05:00
George Fu	e990a98404	FYSETC TFT81050 LCD support (#17568)	2020-04-15 23:34:48 -05:00
Marcio T	791873b10d	Fix ExtUI compile errors (#17544) ... Fixes #16628	2020-04-15 23:17:01 -05:00
randellhodges	808f632997	Update print job timer with Chamber temp (#17552)	2020-04-15 23:12:09 -05:00
thinkyhead	4edaffebfb	[cron] Bump distribution date (2020-04-16)	2020-04-16 00:03:23 +00:00
Scott Lahteine	cdbc7cc52c	Define En DIAG pins for auto-assigns	2020-04-14 19:09:06 -05:00
Alexander Amelkin	cae2b7bf4e	SKR Pro V1.1 StallGuard pins (#17550) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-14 19:05:08 -05:00
thinkyhead	3cdc9b8156	[cron] Bump distribution date (2020-04-15)	2020-04-15 00:03:14 +00:00
Axel	c834b313a5	Fix Mightyboard build (#17537)	2020-04-13 21:49:55 -05:00
Brais Fortes	9038278735	Galician language corrections (#17454)	2020-04-13 21:17:01 -05:00
thinkyhead	f59c0ab842	[cron] Bump distribution date (2020-04-14)	2020-04-14 00:08:34 +00:00
InsanityAutomation	6ce0c94d12	Fix bad comparison (#17470) ... * Suggested message change * Fix Bad Comparison Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-13 17:23:54 -05:00
Scott Lahteine	e9c8da35c5	Subcall overflow error message	2020-04-13 14:54:51 -05:00
Scott Lahteine	421825259e	Shorter M32 error message	2020-04-13 14:54:50 -05:00
Scott Lahteine	22da1b2b31	Rename some "kill" messages	2020-04-13 14:54:50 -05:00
thinkyhead	a7a76f123d	[cron] Bump distribution date (2020-04-13)	2020-04-13 00:03:48 +00:00
Scott Lahteine	e3321920f3	Update Marlin website links to https	2020-04-12 17:21:14 -05:00
Scott Lahteine	f090a927f4	Reapply BLTouch deploy/stow patch ... - Fixes #14328 - Originally #14352 - Reverted in 2580104	2020-04-12 15:16:43 -05:00
Scott Lahteine	ac7b484703	Safe homing: Raise Z on G28 Z (#17501) ... Co-Authored-By: RFBomb <robbery525@gmail.com>	2020-04-12 14:58:58 -05:00
Scott Lahteine	a2e9a02429	Fix PLR when card isn't mounted yet ... Fixes a regression from 9bff67bc74	2020-04-12 14:44:45 -05:00
Gustavo Alvarez	7894937737	Update Spanish language (#17505)	2020-04-12 14:12:08 -05:00
Scott Lahteine	4cdd51cd3a	Apply TERN to status screen	2020-04-12 13:28:07 -05:00
Gustavo Alvarez	37752bd8bb	Update Spanish language (#17465)	2020-04-12 01:35:30 -05:00
dandantsui	333092c488	Fix MKS Robin infinite boot (#17497)	2020-04-12 01:23:08 -05:00
Scott Lahteine	2493cf0364	Fix M1001 with HAS_LEDS_OFF_FLAG	2020-04-12 01:22:10 -05:00
Scott Lahteine	7aed32df00	Fix SD_FINISHED_RELEASECOMMAND bug ... Fixes #17401 bug that was introduced in 8f26c3a	2020-04-11 22:08:37 -05:00
Ryan	a97ae51cc7	Archim: PIO upload on Windows, Arduino IDE LCD (#17405) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-04-11 20:39:02 -05:00
Scott Lahteine	e4903396d4	Fix up pausing / parking display (#17460)	2020-04-11 20:36:17 -05:00
thinkyhead	dfb5968bfe	[cron] Bump distribution date (2020-04-12)	2020-04-12 00:03:21 +00:00
Roxy-3D	07c9dc4142	Make pid_debug_flag match declaration in M303.cpp ... Get it right this time!	2020-04-11 11:03:04 -05:00
Roxy-3D	a65198882f	Make declaration of PID_debug_flag match M303.cpp	2020-04-11 10:25:19 -05:00
thinkyhead	8647d6b8d8	[cron] Bump distribution date (2020-04-11)	2020-04-11 00:03:20 +00:00
Scott Lahteine	48919c54fb	Add SRAM command injection (#17459)	2020-04-09 20:05:58 -05:00
thinkyhead	7af0da7f93	[cron] Bump distribution date (2020-04-10)	2020-04-10 00:03:54 +00:00
Scott Lahteine	c2bd9dd4f5	Show "Pausing…" during pause	2020-04-09 18:09:54 -05:00
Marcio T	dbdfe61644	Fix and improve FTDI Eve Touch UI (#17426)	2020-04-09 16:00:25 -05:00
Gustavo Alvarez	5158106c12	Update Spanish translation (#17406)	2020-04-09 13:35:32 -05:00
Scott Lahteine	3645e59893	Minor style tweaks	2020-04-09 12:31:33 -05:00
Scott Lahteine	71a4ab3331	Add "Settings Stored" message	2020-04-09 12:31:33 -05:00
thinkyhead	556406a127	[cron] Bump distribution date (2020-04-09)	2020-04-09 00:02:53 +00:00
studiodyne	a1523d6419	Fix: const needed for operator* (#17443)	2020-04-08 15:00:31 -05:00
Scott Lahteine	3ea23712eb	Fix stepper DAC compile ... Fixes #17438	2020-04-08 14:17:29 -05:00
Scott Lahteine	d6badb77a4	Clean up whitespace	2020-04-08 14:04:51 -05:00
grauerfuchs	293a0997c9	Fix / optimize PCA9533 LED (Mightyboard) (#17381)	2020-04-08 12:53:28 -05:00
thinkyhead	079644d012	[cron] Bump distribution date (2020-04-08)	2020-04-08 00:02:57 +00:00
thinkyhead	e1fc6f7e25	[cron] Bump distribution date (2020-04-07)	2020-04-07 00:03:10 +00:00
thisiskeithb	966e0e4a77	BTT002 release V1 uses STM32F407VGT6 (#17387)	2020-04-06 15:51:09 -05:00
Tor-p	d6f39a69af	Fix G76 probe height / position (#17392)	2020-04-06 15:32:06 -05:00
thinkyhead	1d81bb7a2b	[cron] Bump distribution date (2020-04-06)	2020-04-06 00:02:56 +00:00
Brais Fortes	c47feb1cfe	Update Galician language (#17418)	2020-04-05 18:36:27 -05:00
Scott Lahteine	fad9235cd8	Move MSG_x_LINE to multi_language.h	2020-04-05 18:25:59 -05:00
Scott Lahteine	07b3f38269	First SD status change is silent	2020-04-04 23:51:20 -05:00
Giuliano Zaro	86a3efda6f	Update Italian language (#17407)	2020-04-04 20:51:05 -05:00
thinkyhead	da0f63cd1c	[cron] Bump distribution date (2020-04-05)	2020-04-05 00:02:50 +00:00
Scott Lahteine	0e06aaa2bc	Add millis helper macros	2020-04-04 02:48:30 -05:00
Scott Lahteine	723d4d6f61	Fix Archim 2 build for PIO	2020-04-04 02:18:33 -05:00
Scott Lahteine	65f6a373b0	Refactor SD detect handler (#17380) ... Co-Authored-By: Eric Ptak <trouch@users.noreply.github.com>	2020-04-04 00:08:25 -05:00
InsanityAutomation	bc01d8d023	Toolchange touchup (#17395) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-04-03 19:17:05 -05:00
thinkyhead	ed0799d653	[cron] Bump distribution date (2020-04-04)	2020-04-04 00:03:24 +00:00
Ben	df8b7dfc40	Various Laser / Spindle improvements (#15335)	2020-04-02 19:31:08 -05:00
thinkyhead	e7e9304819	[cron] Bump distribution date (2020-04-03)	2020-04-03 00:03:31 +00:00
Scott Lahteine	2b9d2dce16	Apply GRID_LOOP	2020-04-02 14:33:04 -05:00
Marcio T	be0e313c07	Touch UI additions, bug fixes (#17379)	2020-04-02 14:24:55 -05:00
Scott Lahteine	11ce281694	Followup to #17351	2020-04-02 13:32:59 -05:00
Scott Lahteine	9f86dde195	Clean up UI declarations, apply TERN_	2020-04-02 01:31:03 -05:00
Scott Lahteine	f263782f1b	Fix ESP32 eeprom flag	2020-04-01 23:51:33 -05:00
Scott Lahteine	62e8c2dd87	Fix up 'system' includes	2020-04-01 23:51:09 -05:00
Scott Lahteine	514afddeb4	Minor code cleanup	2020-04-01 19:48:58 -05:00
Scott Lahteine	7f5dc7b919	More 8 extruders (TMC) support	2020-04-01 19:46:21 -05:00
thinkyhead	c47bdae9f2	[cron] Bump distribution date (2020-04-02)	2020-04-02 00:03:23 +00:00
Simon Jouet	192c7c27b9	Fix extra TMC serial begin calls (#17351)	2020-04-01 16:20:38 -05:00
Marcelo Castagna	178ca2bcdf	Fix M710 report formatting (#17356)	2020-03-31 19:13:37 -05:00
thinkyhead	5236889377	[cron] Bump distribution date (2020-04-01)	2020-04-01 00:03:36 +00:00
Scott Lahteine	e7f020f3f2	Shorten some internal pin names	2020-03-31 14:43:01 -05:00
Marcio T	d83ad6f321	Improve / fix FTDI EVE Touch UI (#17338) ... - Fix timeout and debugging string - Fix check for whether `LCD_TIMEOUT_TO_STATUS` is valid - Fix incorrect debugging message - Make capitalization of callbacks consistent. - Allow Touch UI to use hardware SPI on Einsy boards - Move print stats to About Printer page. - More generic about screen with GPL license. - Add missing handler for power loss event - Less code duplication on status screen and main/advanced menu; more legible - Reorganize advanced and main menu to add more features - Hide home Z button when using Z_SAFE_HOMING - Fix compilation errors when certain features enabled - Fix missing labels in UI - Improve color scheme - Add new preheat menus - Fix incorrect rendering of Marlin logo on boot - Add Level X Axis and Auto calibrate buttons	2020-03-31 14:22:04 -05:00
Tanguy Pruvot	c759729478	STM32F1: Restore M43 build support (#17336)	2020-03-31 14:13:20 -05:00
Scott Lahteine	e0e87ca19a	Fix last arc segment ... Co-Authored-By: ellensp <ellensp@hotmail.com>	2020-03-31 12:50:48 -05:00
Scott Lahteine	528907cb16	Additional TERN macros	2020-03-31 12:50:48 -05:00
Scott Lahteine	96ab16a9dd	Pulldown for all FastIO headers ... Co-Authored-By: borsegbr <borsegbr@users.noreply.github.com>	2020-03-31 12:37:22 -05:00
thinkyhead	0ea26d538b	[cron] Bump distribution date (2020-03-31)	2020-03-31 00:03:22 +00:00
thinkyhead	747a4bb623	[cron] Bump distribution date (2020-03-30)	2020-03-30 00:03:19 +00:00
Scott Lahteine	9b886c2ad4	Load balance some tests	2020-03-29 18:14:15 -05:00
Scott Lahteine	223aa5cc4e	No unscaled_e_move for CNC	2020-03-29 17:20:26 -05:00
Scott Lahteine	d029a09810	Minor HAL cleanup	2020-03-29 17:14:23 -05:00
Scott Lahteine	765a9f3471	do_pause_e_move => unscaled_e_move	2020-03-29 16:26:55 -05:00
Scott Lahteine	fc11e72174	Fix extra unskew call ... Fixes #17264	2020-03-29 16:11:03 -05:00
oscarsan1	b35dc5f0b4	Fix Trigorilla 1.4 missing spaces	2020-03-29 13:46:03 -05:00
thinkyhead	fc74c6a7b6	[cron] Bump distribution date (2020-03-29)	2020-03-29 00:03:23 +00:00
Roxy-3D	2f7e5cf7dd	Fix typo...	2020-03-28 09:53:04 -05:00
Scott Lahteine	747b964295	Clean up user-wait, SD completion (#17315)	2020-03-28 03:18:53 -05:00
Scott Lahteine	a84990961a	Simplify TWIBus debug	2020-03-28 01:20:15 -05:00
Scott Lahteine	53fe572bbd	Limited backlash editing with Core kinematics (#17281)	2020-03-27 22:00:27 -05:00
InsanityAutomation	de648bfdc1	Add Funmat HT V4.0 board support (#17305) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-03-27 21:08:47 -05:00
thinkyhead	e71b25a555	[cron] Bump distribution date (2020-03-28)	2020-03-28 00:03:16 +00:00
Mathias Rasmussen	8752fbd92c	Store case light brightness in EEPROM (#17307)	2020-03-27 17:38:28 -05:00
InsanityAutomation	bed41af868	Fix Stepper PWM menu (#17298)	2020-03-27 17:30:17 -05:00
Giuliano Zaro	129b270628	QSPI EEPROM for SAMD51 (#17292)	2020-03-27 17:29:17 -05:00
InsanityAutomation	3655e240f5	Fix SD finished ExtUI / host action (#17285)	2020-03-27 16:06:39 -05:00
thinkyhead	98ef161bfe	[cron] Bump distribution date (2020-03-27)	2020-03-27 00:03:27 +00:00
Scott Lahteine	54a12ee1d6	Tweak eeprom storage type	2020-03-25 21:07:08 -05:00
Scott Lahteine	d6a4c3079d	Tweak ui.finish_status	2020-03-25 21:07:08 -05:00
Giuliano Zaro	8122468a36	Update Italian language (#17293)	2020-03-25 21:05:36 -05:00
Acenotass	5c150c0c94	Update Russian language (#17290)	2020-03-25 21:04:57 -05:00
Scott Lahteine	5ec1a8bb2b	Fix M0 unused var warning	2020-03-25 20:27:21 -05:00
Scott Lahteine	dd6781217a	motion.cpp: HAS_DIST_MM_ARG	2020-03-25 19:21:48 -05:00
Scott Lahteine	0175189c34	Allow G2_PWM to be slimmer	2020-03-25 19:18:42 -05:00
Scott Lahteine	adb6334ba0	Use "dist" instead of "delta" for clarity	2020-03-25 19:18:42 -05:00
thinkyhead	4dea020050	[cron] Bump distribution date (2020-03-26)	2020-03-26 00:03:54 +00:00
Scott Lahteine	c86ee574ec	Drop old comment	2020-03-25 15:11:12 -05:00
Scott Lahteine	f2ed18d150	M303 followup ... - Put 'D' before other params for clean exit. - Use serial on/off for debug status.	2020-03-25 15:08:52 -05:00
Roxy-3D	1986e1cdf8	Allow PID_DEBUG to be turned on and off (#17284) ... M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.	2020-03-24 19:38:09 -05:00
thinkyhead	0aeee64cca	[cron] Bump distribution date (2020-03-25)	2020-03-25 00:03:18 +00:00
Roxy-3D	075a86b076	Update LCD timing on Formbot T-Rex 2+ machines ... The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.	2020-03-24 17:15:03 -05:00
Roxy-3D	5d515c3a2f	Adjust for timing shift on Max7219 displays on AVR's ... Something has shifted. The previous timing delays on the Max7219 debug displays is too tight without this correction. I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared. This corrects the issue and the display results are clean again.	2020-03-24 17:08:31 -05:00
Scott Lahteine	68face848a	Sanity check CONTROLLERFAN_SECS	2020-03-24 16:41:21 -05:00
Scott Lahteine	7455bb09b3	Add SoftwareSerialM for MKS Robin (#17207)	2020-03-24 16:14:30 -05:00
ellensp	41e944da00	Fix Emergency Parser on DUE (#17276) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-03-24 15:14:52 -05:00
MarkMan0	4113481c4e	Fix limits on acceleration editing (#17280)	2020-03-24 15:13:37 -05:00
mkpfalz	3260228009	Sanity-check CORE backlash axes (#17279) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-03-24 14:08:55 -05:00
rado79	bef9b9b07e	Delay after homing_backoff for CoreXY sensorless homing (#17273)	2020-03-23 20:32:36 -05:00
thinkyhead	edd6f6c5f2	[cron] Bump distribution date (2020-03-24)	2020-03-24 00:03:08 +00:00
Scott Lahteine	c87d73045b	Fix extra M114 output line ... Fixes #17255	2020-03-23 18:31:26 -05:00
George Fu	e3ebbe25e0	DGUS updates (#17260)	2020-03-23 18:00:22 -05:00
ellensp	cd4060a99c	Add USB serial support to SERIAL_PORT_2 on DUE (#17245) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-03-23 17:55:21 -05:00
Scott Lahteine	adb7a88428	Fix an unused var warning	2020-03-23 17:35:43 -05:00
Scott Lahteine	580d314fbe	Skip impossible PWM sanity-checks	2020-03-23 17:35:43 -05:00
Scott Lahteine	fe154fa5de	Fix CONTROLLER_FAN options compile	2020-03-23 17:35:43 -05:00
RasmusAaen	717c216851	Fix Copymaster Y_MAX pin (#17267)	2020-03-23 17:34:38 -05:00
thinkyhead	27c281eec3	[cron] Bump distribution date (2020-03-23)	2020-03-23 00:03:08 +00:00
Scott Lahteine	2460a3dfbb	Fix custom version file include	2020-03-21 23:34:19 -05:00
Scott Lahteine	2c325c2a7d	Format some pins files	2020-03-21 21:18:46 -05:00
Scott Lahteine	e62b52da99	Use pin/port names for CHITU pins	2020-03-21 21:18:46 -05:00
Scott Lahteine	7988e31f5e	whitespace	2020-03-21 21:16:15 -05:00
thinkyhead	29874b21b6	[cron] Bump distribution date (2020-03-22)	2020-03-22 00:03:15 +00:00
Scott Lahteine	04cea864bc	Split up STM32 pins files (#17212)	2020-03-20 23:45:00 -05:00
thinkyhead	3151856e98	[cron] Bump distribution date (2020-03-21)	2020-03-21 00:03:28 +00:00
thinkyhead	1738c13bc2	[cron] Bump distribution date (2020-03-20)	2020-03-20 00:03:07 +00:00
George Fu	71db5c1605	Fix FYSETC mini 12864 init / glitches (#17209)	2020-03-19 14:11:55 -05:00
thinkyhead	14daf1ee5e	[cron] Bump distribution date (2020-03-19)	2020-03-19 00:03:40 +00:00
InsanityAutomation	84dec5da10	Add M42 M, improve M43 (#17173)	2020-03-18 16:12:51 -05:00
Scott Lahteine	de45ac41ad	Implement CONTROLLER_FAN_USE_Z_ONLY ... Followup to #17149	2020-03-18 14:36:40 -05:00
Erkan Colak	83eec683c9	New Controller Fan options and M710 gcode (#17149)	2020-03-18 13:41:12 -05:00
Scott Lahteine	abea6d5787	Tweak some lambdas	2020-03-18 10:33:15 -05:00
thinkyhead	252178fe62	[cron] Bump distribution date (2020-03-18)	2020-03-18 00:04:28 +00:00
RasmusAaen	c768605bde	Add Copymaster3D board (#17188)	2020-03-17 15:25:10 -05:00
Joe Prints	1f5824247f	More decimal places for babystep / Z probe offset (#17195)	2020-03-17 15:12:52 -05:00
Scott Lahteine	e8205af6fb	Apply HAS_TMC_UART to pins files	2020-03-17 15:06:01 -05:00
Karl Andersson	e5dcab8fd2	ARMED support for TMC UART, probe temp (#17186)	2020-03-17 15:05:12 -05:00
ellensp	40922c7da7	Fix MKS SBASE 1.6 E1 heater pin (#17191)	2020-03-17 14:51:57 -05:00
thinkyhead	c1672220fd	[cron] Bump distribution date (2020-03-17)	2020-03-17 00:04:33 +00:00
Scott Lahteine	f6e80d576d	Fix Z_MIN_PROBE_PIN on SKR 1.4 (#17187)	2020-03-16 17:49:33 -05:00
Scott Lahteine	b14c933171	LPC1768 EEPROM fallback to flash, add overrides (#17184)	2020-03-16 15:59:05 -05:00
Pascal de Bruijn	2fc0df1b39	Shorter LCD remaining time to prevent overlap (#17181)	2020-03-16 14:11:55 -05:00
thinkyhead	a662079cbc	[cron] Bump distribution date (2020-03-16)	2020-03-16 00:04:45 +00:00
InsanityAutomation	775a4294fc	Configurable SLOWDOWN divisor (#17171)	2020-03-15 18:29:18 -05:00
Giuliano Zaro	3b987dfcec	Fix G34 Z lower, extra "BLTOUCH" debug line (#17175)	2020-03-15 18:23:24 -05:00
Scott Lahteine	c39873759f	Fix Z after ABL Bilinear G29 with fade ... Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>	2020-03-15 18:18:38 -05:00
Karl Andersson	85187290a7	Fix incorrect type on ubl_storage_slot (#17170)	2020-03-15 18:03:10 -05:00
Scott Lahteine	695e014075	Do later mounting of LCD-based SD	2020-03-14 19:24:35 -05:00
Scott Lahteine	090a90a036	Add EEPROM_BOOT_SILENT option	2020-03-14 19:24:35 -05:00
Scott Lahteine	095a1123c1	Add a global machine state	2020-03-14 19:24:35 -05:00
thinkyhead	5c1970a229	[cron] Bump distribution date (2020-03-15)	2020-03-15 00:04:39 +00:00
Roxy-3D	9f85165101	Allow Tool Offset adjustments to have another digit of precision ... Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy. This is not enough. So the edit menu is switched to float52 to fix the issue.	2020-03-14 18:12:29 -05:00
Scott Lahteine	8b2d55e345	Config version 020005	2020-03-13 23:22:46 -05:00
InsanityAutomation	cee07f3f6b	Quad Z leveling, G34 (R)ecalculate (#17122)	2020-03-13 23:22:04 -05:00
Scott Lahteine	118bd2f8b2	Apply loop shorthand macros (#17159)	2020-03-13 23:18:16 -05:00
Scott Lahteine	a96be32fae	Fix G26 corrupted position	2020-03-13 19:27:02 -05:00
thinkyhead	983a8cee45	[cron] Bump distribution date (2020-03-14)	2020-03-14 00:04:00 +00:00
Scott Lahteine	6bead0c1b0	Shorter paths to HAL, ExtUI (#17156)	2020-03-13 16:29:29 -05:00
Scott Lahteine	ad980a72f7	M0 Q preserve status	2020-03-13 14:42:42 -05:00
Scott Lahteine	7ec45f4382	Fix end of short (auto0.g) prints	2020-03-13 13:59:17 -05:00
Scott Lahteine	81b0548518	Fix Emergency Parser stuck state	2020-03-13 13:59:17 -05:00
Erkan Colak	aa32c47fb5	Shorten German BLTouch menu item names (#17151)	2020-03-13 12:34:03 -05:00
nick-diel	7070ea0b49	Add OnPidTuning event to Malyan LCD (#17143) ... All ExtUI LCDs need to keep up with ExtUI API changes.	2020-03-12 19:48:33 -05:00
Scott Lahteine	59cb1466b7	Fix DUGS / DGUS typo	2020-03-12 19:30:18 -05:00
Jason Smith	9c759e5f74	Fix BAUD_RATE_GCODE, etc. (#17135)	2020-03-12 19:26:09 -05:00
thinkyhead	8c11ecaf73	[cron] Bump distribution date (2020-03-13)	2020-03-13 00:04:16 +00:00
thinkyhead	1f55986ed2	[cron] Bump distribution date (2020-03-12)	2020-03-12 00:04:11 +00:00
Scott Lahteine	318a16637b	Fix M810 macro multiple use ... Fixes #17125	2020-03-11 17:15:39 -05:00
BigTreeTech	8bad6e11e2	Fix STM32 _WRITE macro parameter (#17121)	2020-03-11 16:42:28 -05:00
Scott Lahteine	112245ee48	More explicit EEPROM types (#17127)	2020-03-11 16:41:18 -05:00
Scott Lahteine	924fa6045c	Non-const REMEMBER needed for RESTORE	2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)	f29d6f802f	Revert Anet 1.x envs change (#17120)	2020-03-11 15:08:47 -05:00
George Fu	201c991cfa	Fix and update DGUS displays (#17072)	2020-03-11 03:40:30 -05:00
Jamie	23c5701178	Apply soft limits to joystick jogging (#17114)	2020-03-10 22:59:49 -05:00
Scott Lahteine	eb6c992bfb	Announce SD file open ... Requested in #17110	2020-03-10 22:54:19 -05:00
Gurmeet Athwal	bd44f041e8	M220 print FR percentage (#17101)	2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)	d78fbce827	Fix pio environments for Anet 1.x (#17109)	2020-03-10 20:04:44 -05:00
jufimu12	627aa8db2d	Fix G34, add HOME_AFTER_G34 option (#17108) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-03-10 20:00:26 -05:00
Scott Lahteine	e7004550c4	Tweaks to finishSDPrinting (#17082)	2020-03-10 19:42:57 -05:00
thinkyhead	a31b7339cd	[cron] Bump distribution date (2020-03-11)	2020-03-11 00:04:19 +00:00
Scott Lahteine	4e3a793f1e	Fix broken enqueue_P	2020-03-10 18:28:49 -05:00
Scott Lahteine	9bff67bc74	Always look for PLR file, but more quickly	2020-03-10 17:07:14 -05:00
Vert	8bbcbc528c	Fix Z4 stepper indirection macros (#17107)	2020-03-10 15:57:10 -05:00
Scott Lahteine	8f66dbfcd5	SD_DETECT_INVERTED => SD_DETECT_STATE (#17112)	2020-03-10 15:43:06 -05:00
thinkyhead	8799f8bfdb	[cron] Bump distribution date (2020-03-10)	2020-03-10 00:04:08 +00:00
Scott Lahteine	972d1bf5b4	Ensure welcome message	2020-03-09 18:19:37 -05:00
Scott Lahteine	b5530775c9	Add debug logging for setup()	2020-03-09 17:46:49 -05:00
Scott Lahteine	13118dbd8d	Additional numtostr functions	2020-03-09 17:46:49 -05:00
Scott Lahteine	0f39386d9b	Make BOOTSCREEN_TIMEOUT generally available	2020-03-09 17:46:49 -05:00
Scott Lahteine	b579f5dc99	Move 'last_pause_state' closer to usage	2020-03-09 17:46:49 -05:00
thinkyhead	7f490c08da	[cron] Bump distribution date (2020-03-09)	2020-03-09 00:04:03 +00:00
Scott Lahteine	982197b162	Fixes for Z4 axis, CS pins (#17097)	2020-03-08 16:31:37 -05:00
MangaValk	57f488738b	[ToolChanger] Lock the current tool at power-up (#17093)	2020-03-08 16:13:41 -05:00
Scott Lahteine	b21edce943	More general SD_DETECT_INVERTED override	2020-03-08 14:47:16 -05:00
Scott Lahteine	2a71e4f336	Revert that wack backoff	2020-03-07 23:10:56 -06:00
Scott Lahteine	64d092935b	More useful ENABLED / DISABLED macros (#17054)	2020-03-07 22:20:41 -06:00
thinkyhead	5eb6fb1c2f	[cron] Bump distribution date (2020-03-08)	2020-03-08 00:04:21 +00:00
Scott Lahteine	20f93404a7	Add / correct comments	2020-03-07 02:16:17 -06:00
Scott Lahteine	3db784f3c7	More pins debugging cleanup	2020-03-07 02:15:05 -06:00
Scott Lahteine	7b9eb233cb	Emergency Parser dumb terminal compatibility	2020-03-07 02:15:05 -06:00
Scott Lahteine	c99773bae0	Max7219 suspend/resume	2020-03-07 01:18:26 -06:00
Scott Lahteine	8ff25a9566	Max7219 init last	2020-03-07 00:16:44 -06:00
Scott Lahteine	e9f451bffe	Pins debug followup	2020-03-06 21:59:20 -06:00
thinkyhead	3b14158979	[cron] Bump distribution date (2020-03-07)	2020-03-07 00:04:33 +00:00
Scott Lahteine	913de024a9	Change PID dummy value to NAN ... Fixes #17078	2020-03-06 13:55:27 -06:00
Scott Lahteine	1da49d0ac5	Non-blocking Max7219 test pattern	2020-03-06 13:19:38 -06:00
Scott Lahteine	ca4423ed2a	Clean up pins debugging	2020-03-06 13:14:22 -06:00
Scott Lahteine	6cd99e6a77	Add pins to the pins debug list	2020-03-06 13:14:22 -06:00
Scott Lahteine	6d18f715e4	Fix M0/M1 message string	2020-03-06 13:14:22 -06:00
thinkyhead	459a0dae29	[cron] Bump distribution date (2020-03-06)	2020-03-06 00:04:16 +00:00
Scott Lahteine	3a72b0fd41	Update Chinese (TW) language (#17071)	2020-03-05 15:39:49 -06:00
Scott Lahteine	f0248c9ed9	Update Turkish language (#17070)	2020-03-05 15:37:02 -06:00
Scott Lahteine	c0801e900d	Define Z_MIN_PROBE_PIN for Cohesion 3D Remix	2020-03-05 15:10:46 -06:00
Scott Lahteine	e3da86fb45	Fix SKR test for ONBOARD SD	2020-03-05 13:37:09 -06:00
thinkyhead	7e58739a1f	[cron] Bump distribution date (2020-03-05)	2020-03-05 00:04:13 +00:00
Scott Lahteine	631addbbb4	SAMD51 SoftwareSerial (#17041)	2020-03-04 13:15:32 -06:00
Scott Lahteine	d4ac78535c	Allow Z_STOP_PIN override on SKR 1.4 (#17063)	2020-03-04 13:12:48 -06:00
Scott Lahteine	70863fbd55	Avoid name conflict with 'UART'	2020-03-04 12:50:58 -06:00
Scott Lahteine	7709261ea9	Move shared code to wait_for_bed_heating	2020-03-04 12:50:57 -06:00
thinkyhead	ab1863ac48	[cron] Bump distribution date (2020-03-04)	2020-03-04 00:04:06 +00:00
Scott Lahteine	72b63e9520	Fix TEMP_PROBE_PIN for SKR 1.4 ... Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>	2020-03-03 14:53:22 -06:00
George Fu	a698bfdc2a	Update FYSETC S6 pins/variants (#17056)	2020-03-03 14:30:09 -06:00
Scott Lahteine	83a60f15ff	Fix EEPROM compile errors	2020-03-03 14:21:07 -06:00
Scott Lahteine	c083728e4c	General code cleanup	2020-03-03 14:20:37 -06:00
Scott Lahteine	5e28b0f471	Minor EEPROM cleanup	2020-03-02 21:56:21 -06:00
Scott Lahteine	3a07b4412d	Asynchronous M114 and (R)ealtime position option (#17032)	2020-03-02 21:52:53 -06:00
Scott Lahteine	5171e9da93	No more direct G28 calls	2020-03-02 21:01:58 -06:00
thinkyhead	12d05e4835	[cron] Bump distribution date (2020-03-03)	2020-03-03 00:04:10 +00:00
Scott Lahteine	07e22d1d65	Neopixel on LPC uses GPIO toggling	2020-03-02 17:20:01 -06:00
Scott Lahteine	646599d0d9	Finish M900 updates	2020-03-02 17:10:51 -06:00
Scott Lahteine	eb4d5120bf	Keep name around for old configs	2020-03-02 16:23:17 -06:00
InsanityAutomation	552f7a91d0	Default on/off for Power Loss Recovery (#17051)	2020-03-02 16:07:53 -06:00
jufimu12	ad4a9eb73a	Fix G34 probing range/error bug (#17052)	2020-03-02 13:35:02 -06:00
Scott Lahteine	5aa528781f	Fix ambiguous type ... Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>	2020-03-02 13:23:07 -06:00
ellensp	af23c0480e	Don't define 'valptr' if unused (#17048)	2020-03-02 13:17:52 -06:00
ellensp	624ab24a5c	Suppress thisItemNr warning (#17049)	2020-03-02 13:14:08 -06:00
Jason Smith	66334820ca	Add TMC micro-steps sanity check (#17044) ... Co-authored-by: Scott Lahteine <github@thinkyhead.com>	2020-03-02 13:13:04 -06:00
Scott Lahteine	2c4e054e9a	Fix fastio pin comment	2020-03-02 13:11:30 -06:00
Scott Lahteine	49c5f614c6	Minor motion style changes	2020-03-02 12:54:18 -06:00
Scott Lahteine	6b5347ee39	Improved M900	2020-03-02 12:05:00 -06:00
Scott Lahteine	b1a50d54e2	HAS_TRINAMIC => HAS_TRINAMIC_CONFIG	2020-03-02 12:04:36 -06:00
Scott Lahteine	736521a3f1	Balance mega tests, shorten some env names	2020-03-01 21:20:22 -06:00
Scott Lahteine	870a1f753a	Fix undefined STATUS_CHAMBER_WIDTH	2020-03-01 21:19:50 -06:00
Jason Smith	cc822bf70f	Fix some 8 extruders issues, GTR build (#17043)	2020-03-01 21:19:02 -06:00
Jason Smith	5da6819277	Fix build issues with REPRAPWORLD_KEYPAD (#17038) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-03-01 19:54:22 -06:00
Scott Lahteine	362c9ae79a	Clean up use of extra_xyjerk	2020-03-01 19:23:48 -06:00
thinkyhead	ac93df43cd	[cron] Bump distribution date (2020-03-02)	2020-03-02 00:04:18 +00:00
ellensp	4b256a6fa8	Revert FYSETC Mini encoder change (#17040) ... Reverting #17010	2020-03-01 17:59:00 -06:00
Jason Smith	4a3fcd0bf9	Fix three extruder with auto-fan build (#17035)	2020-03-01 17:37:16 -06:00
Scott Lahteine	edd1b76a9a	Fix set_current_from_steppers_for_axis(E_AXIS) bug	2020-03-01 14:36:21 -06:00
Scott Lahteine	c4db8e49a7	XYZ_CHAR macro	2020-03-01 14:36:06 -06:00
Scott Lahteine	3473b21710	Move millis_t includes	2020-03-01 09:50:53 -06:00
Scott Lahteine	5e9a10dbae	Use PSTR for common labels	2020-03-01 08:39:47 -06:00
thinkyhead	1d609d2bbd	[cron] Bump distribution date (2020-03-01)	2020-03-01 00:04:02 +00:00
Vert	6c9ca1bec2	Clarify GT2560 common pins (#17021)	2020-02-29 04:35:10 -06:00
Scott Lahteine	730804289c	Catch more LPC1768 pin conflicts (#17019)	2020-02-29 04:14:40 -06:00
ManuelMcLure	39c34e4992	Use ADC resolution in AD595/8495 calculation (#17018) ... Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).	2020-02-28 23:28:17 -06:00
thinkyhead	b946530ef6	[cron] Bump distribution date (2020-02-29)	2020-02-29 00:03:54 +00:00
ellensp	9b145c7c73	Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 (#17010)	2020-02-28 12:26:54 -06:00
jufimu12	ac755fce82	Fix G34 "Decreasing accuracy" bug (#17013) ... Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2020-02-28 11:42:51 -06:00
Scott Lahteine	97e87d8262	Fix G76 reachable test (#17005)	2020-02-27 22:47:44 -06:00
Anders Sahlman	c669420134	Pass along sanity_check for (G33) probing (#17006)	2020-02-27 19:58:35 -06:00
thinkyhead	f8497b8171	[cron] Bump distribution date (2020-02-28)	2020-02-28 00:03:53 +00:00
Scott Lahteine	bfbd976c09	General G76 cleanup	2020-02-27 07:53:24 -06:00
Scott Lahteine	a75a25cd7c	Replace direct call to G28(true)	2020-02-27 07:48:34 -06:00
Scott Lahteine	4f55723527	RUMBA has 3 E plugs	2020-02-27 07:48:02 -06:00
Scott Lahteine	77b82d300a	Add idle_no_sleep	2020-02-27 06:45:33 -06:00
Scott Lahteine	e5d39063a2	Cleanups for PTC	2020-02-27 06:45:23 -06:00
Scott Lahteine	be62ab2d02	Move reachable test to Probe class	2020-02-27 06:16:33 -06:00
Roman Moravčík	9f8ee31144	Update Slovak language (#17002)	2020-02-27 03:38:46 -06:00
Makoto Schoppert	8164cac797	Fix planner.cpp compile (#16996)	2020-02-27 03:29:44 -06:00
thinkyhead	a80eda41bc	[cron] Bump distribution date (2020-02-27)	2020-02-27 00:03:42 +00:00
Scott Lahteine	bafe8d920a	Handle print completed LED event in M0	2020-02-26 12:02:54 -06:00
Scott Lahteine	633b716a3a	Define DIAG pins for MKS SGen-L	2020-02-26 11:35:07 -06:00
Scott Lahteine	832951ec44	Case-insensitive g-code option (#16932)	2020-02-26 09:23:55 -06:00
Scott Lahteine	18b875dc9f	Allow print recovery after parking	2020-02-26 08:16:46 -06:00
Scott Lahteine	6fd7f4fe1b	Fix unified status bed temp display	2020-02-26 08:09:57 -06:00
Scott Lahteine	263a7beeb5	More extra travel jerk changes ... Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>	2020-02-26 07:24:36 -06:00
Scott Lahteine	6913a4dfa8	Prevent park_point compile error	2020-02-26 07:10:35 -06:00
Scott Lahteine	025c50cc6d	Quick-homing sensorless back-off (#16872)	2020-02-26 06:50:13 -06:00
Scott Lahteine	02cce7d4b4	Add TRAVEL_EXTRA_XYJERK option ... See #16949 Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>	2020-02-26 06:43:07 -06:00
Scott Lahteine	0a7e7a6fa5	Allow servo features in combination (#16960)	2020-02-26 06:26:54 -06:00
Scott Lahteine	daa32013b1	Sanity check for LPC serial pin conflict (#16981)	2020-02-26 06:26:30 -06:00
Scott Lahteine	ec1b86d9cb	Serial strings in macros	2020-02-26 05:38:33 -06:00
Scott Lahteine	cf597e2bb1	Allow weird probe values in G33	2020-02-26 05:33:57 -06:00
ellensp	e76f2ed4cb	Fix Trinamic pulse rate auto-assignment (#16966)	2020-02-26 04:34:21 -06:00
Scott Lahteine	b5c2190b38	String optimize followup	2020-02-26 04:32:40 -06:00
InsanityAutomation	28008aced0	Correct SKR expansion port pins (#16974)	2020-02-26 04:18:34 -06:00
ellensp	70af080813	Add LPC1768 Serial ports for pinsDebug (#16980)	2020-02-26 04:12:53 -06:00
Scott Lahteine	5ebba4b19f	More serial strings	2020-02-26 04:11:12 -06:00
InsanityAutomation	cdcd45d651	Set LCD status for EEPROM errors (#16977)	2020-02-26 03:04:02 -06:00
Scott Lahteine	e78f607ef3	Use a STR_ prefix for non-translated strings	2020-02-26 03:02:03 -06:00
Scott Lahteine	6b9a17be16	Language: "failsafe" => "Defaults"	2020-02-26 02:03:47 -06:00
InsanityAutomation	4250a98908	Toolchange improvements (#16979)	2020-02-26 00:12:14 -06:00
Scott Lahteine	5b438fb20d	HAS_SDCARD_CONNECTION is more obsolete	2020-02-25 22:30:30 -06:00
Scott Lahteine	5071fe82ab	Ensure proper SD print completion (#16967)	2020-02-25 22:18:14 -06:00
thinkyhead	91cff02596	[cron] Bump distribution date (2020-02-26)	2020-02-26 00:03:52 +00:00
Scott Lahteine	454cbcce51	Fix the wait loop in M0 / M1	2020-02-25 12:20:54 -06:00
InsanityAutomation	6bfae5de6f	Fix SKR 1.4 Turbo SD_DETECT_PIN (#16955)	2020-02-25 03:17:08 -06:00
InsanityAutomation	3e685777a8	Fix LCD cutter/bed icons overlapping (#16956)	2020-02-25 03:07:36 -06:00
Giuliano Zaro	d13b153230	Update Italian language (#16947)	2020-02-25 03:05:58 -06:00
thinkyhead	ca305b03b7	[cron] Bump distribution date (2020-02-25)	2020-02-25 00:04:00 +00:00
Scott Lahteine	9040394e8e	Fix card_eof error	2020-02-24 11:00:01 -06:00
Marcio T	92278a45ed	Allow Z_SAFE_HOMING_POINT outside bed (#16945)	2020-02-24 10:40:12 -06:00
Scott Lahteine	a254354e68	BS_TOTAL_AXIS => BS_TOTAL_IND	2020-02-24 06:11:43 -06:00
Scott Lahteine	5e197df89a	Fix Babystepping loop (again)	2020-02-24 05:48:42 -06:00
Scott Lahteine	8ba5ef8cae	"Init. Media" => "Attach Media"	2020-02-24 05:33:23 -06:00
Scott Lahteine	9a51f29efa	Simplified E_AXIS_HAS macro	2020-02-23 23:55:56 -06:00
Jason Smith	ebd2bcc177	Fix AXIS_HAS_SW_SERIAL	2020-02-23 21:59:31 -06:00
thinkyhead	9717b3044f	[cron] Bump distribution date (2020-02-24)	2020-02-24 00:03:56 +00:00
Jason Smith	2bcc2ec7d1	Reduce default TMC baudrate to 57600 with Software Serial (#16930)	2020-02-23 07:48:56 -06:00
Giuliano Zaro	529d57bddf	Sync Italian language (#16935)	2020-02-23 07:47:30 -06:00
Scott Lahteine	0ba18848af	Allow USE_GCODE_SUBCODES for debugging	2020-02-22 22:50:03 -06:00
Scott Lahteine	b2328d089a	Allow LCD_PIXEL_WIDTH/HEIGHT override	2020-02-22 21:36:21 -06:00
Scott Lahteine	29ec868c4b	Commit last SD line before fileHasFinished	2020-02-22 20:46:52 -06:00
Scott Lahteine	1d431fe8d2	Suppress "packed member" warning	2020-02-22 19:28:24 -06:00
ZMiguel Alves	2471a8bb91	Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 (#16928)	2020-02-22 18:45:10 -06:00
ellensp	7bf3581b02	Fix M0/M1 broken wait loop (#16921)	2020-02-22 18:37:39 -06:00
Scott Lahteine	b9b29bf4c0	Followup to babystep hotfix	2020-02-22 18:34:49 -06:00
thisiskeithb	20df64814e	Finish Custom User Menu sanity-check (#16917)	2020-02-22 18:33:34 -06:00
thinkyhead	34c92bbc17	[cron] Bump distribution date (2020-02-23)	2020-02-23 00:03:55 +00:00
vivian-ng	eeec4c27e7	[ESP32] Allow user to define pins for hardware Serial1 and Serial2 (#16918)	2020-02-22 04:00:10 -06:00
Scott Lahteine	484e1a624c	CoreXY Babystepping hotfix	2020-02-22 02:52:59 -06:00
Scott Lahteine	ac3e27c026	Hotfix for Babystepping	2020-02-22 02:52:21 -06:00
Scott Lahteine	1ab6f910b6	Use moves_free in ok_to_send	2020-02-22 02:30:59 -06:00
thinkyhead	cfd49740eb	[cron] Bump distribution date (2020-02-22)	2020-02-22 00:03:47 +00:00
Scott Lahteine	5d16497bed	Tweak pins spacing, comments	2020-02-21 08:33:11 -06:00
ellensp	9f53bbd791	Add PICA shields support (#16891)	2020-02-21 08:27:32 -06:00
Jamie	e1d367e05a	Fix EEPROM errors with EXTRUDERS == 0 (#16898)	2020-02-21 07:42:13 -06:00
Karl Andersson	f30897500d	Disable spreadcycle in tmc_enable_stallguard<2209> (#16890)	2020-02-21 07:40:55 -06:00
Tanguy Pruvot	68de12acbf	Followup to autoreport patch (#16914) ... See a1f026f57a	2020-02-21 07:36:59 -06:00
Scott Lahteine	6320f9795c	More EEPROM cleanup	2020-02-20 20:56:13 -06:00
Scott Lahteine	22b974691e	Tweak process_line_done for speed	2020-02-20 20:36:51 -06:00
Scott Lahteine	4ef627d79f	Add a note on EEPROM todo	2020-02-20 20:36:50 -06:00
Scott Lahteine	19991e269b	Show end prompt with Print Event LEDs	2020-02-20 20:36:50 -06:00
Scott Lahteine	b8b225c8b5	Function for CONFIG_ECHO_HEADING	2020-02-20 20:36:50 -06:00
Scott Lahteine	a1f026f57a	Inline manage_inactivity, tweak autoreport_paused	2020-02-20 20:36:50 -06:00
Scott Lahteine	2b788e9aa6	Single envs for specific boards	2020-02-20 20:20:15 -06:00
thinkyhead	140e4ac507	[cron] Bump distribution date (2020-02-21)	2020-02-21 00:03:41 +00:00
Robby Candra	1c52d76668	Serial redirect for Move Command when stopping (#16906)	2020-02-20 02:22:07 -06:00
thinkyhead	178735b958	[cron] Bump distribution date (2020-02-20)	2020-02-20 00:03:52 +00:00
thinkyhead	4c179ba3f7	[cron] Bump distribution date (2020-02-19)	2020-02-19 00:03:54 +00:00
thinkyhead	05f51e9355	[cron] Bump distribution date (2020-02-18)	2020-02-18 00:03:31 +00:00
thinkyhead	75e3aa12c5	[cron] Bump distribution date (2020-02-17)	2020-02-17 00:03:58 +00:00
Scott Lahteine	99a5074372	Fix babystep include, typos in stepper.cpp ... Fix #16881	2020-02-16 17:49:21 -06:00
vivian-ng	4c6f695bea	Put ESP32 I2S stepper task and Marlin on the same core (#16874)	2020-02-16 16:44:36 -06:00
Tanguy Pruvot	8bc3e63871	Update French language (#16877)	2020-02-16 16:39:17 -06:00
Giuliano Zaro	42208bc031	Fix unknown command on empty lines (#16867)	2020-02-16 01:10:20 -06:00
Giuliano Zaro	199a1ba0e5	Move SAMD51 Temperature timer to RTC (#16868)	2020-02-15 22:45:52 -06:00
Scott Lahteine	4360142bd1	Defer updated ADC	2020-02-15 22:37:16 -06:00
Scott Lahteine	ddce1c6ef2	Show '*' for zero 'stst' flag	2020-02-15 22:35:28 -06:00
Scott Lahteine	72fae2faa5	Require TMCStepper 0.6.2	2020-02-15 22:35:28 -06:00
Scott Lahteine	64a81f887a	EXPERIMENTAL integrated BABYSTEPPING (#16829)	2020-02-15 21:42:28 -06:00
Scott Lahteine	64b96f3908	Double ADC read frequency (#16864)	2020-02-15 19:10:46 -06:00
thinkyhead	52a1268089	[cron] Bump distribution date (2020-02-16)	2020-02-16 00:04:09 +00:00
Scott Lahteine	5584da388c	Conceal float rounding errors on display ... Fix #16866	2020-02-15 02:55:41 -06:00
Scott Lahteine	efdaf940a5	Fix byte-to-percent display ... Fixes #16866	2020-02-15 02:37:13 -06:00
Scott Lahteine	1087e318e5	Fix a BORG compile warning	2020-02-15 01:47:15 -06:00
thinkyhead	150237f712	[cron] Bump distribution date (2020-02-15)	2020-02-15 00:03:59 +00:00
George Fu	63dd0f249d	Fysetc S6 pins / LCD updates (#16830)	2020-02-14 07:18:57 -06:00
Scott Lahteine	0b984519c3	Clean up stepper and babystep (#16857)	2020-02-14 05:14:37 -06:00
Scott Lahteine	073e4443e8	Optimize "Dismiss" string	2020-02-14 00:05:06 -06:00
Scott Lahteine	00ba053c90	Clean up host actions code (#16856)	2020-02-13 23:39:27 -06:00
Giuliano Zaro	ff0c931e47	Add RAMPS 1.4.4 to AGCM4 (#16606)	2020-02-13 23:28:18 -06:00
Scott Lahteine	49a66bc4cc	Fix ESP32 warning, specify supported version	2020-02-13 19:22:13 -06:00
Scott Lahteine	f3f692adf7	Don't assert safe homing for delta/scara	2020-02-13 19:22:13 -06:00
Robby Candra	af84e362cc	Remove unused queue.stopped_N (#16850)	2020-02-13 18:59:32 -06:00
Gaston Dombiak	082117c4bb	Ping the job timer in M140 (#16849)	2020-02-13 18:43:47 -06:00
Giuliano Zaro	0e17d10bf3	Fix G-code line parsing (#16840)	2020-02-13 18:30:47 -06:00
thinkyhead	68077149e2	[cron] Bump distribution date (2020-02-14)	2020-02-14 00:04:13 +00:00
thinkyhead	62d7d49719	[cron] Bump distribution date (2020-02-13)	2020-02-13 00:03:34 +00:00
Scott Lahteine	1d8d91afc6	No limit needed on this raise ... Remove an extraneous limit from #16811.	2020-02-12 14:57:11 -06:00
Robby Candra	a83ad2d9d4	Define MarlinSerial instances for DGUS (#16841)	2020-02-11 20:30:20 -06:00
thinkyhead	0306c1bb0c	[cron] Bump distribution date (2020-02-12)	2020-02-12 00:03:54 +00:00
Giuliano Zaro	4a733796bd	Prevent pin glitches on out commutation (#16835) ... Better for switching from pulled input to output and also set real output (with no input enabled).	2020-02-11 10:43:28 -06:00
Scott Lahteine	0fd0554b5f	Simplify old safe homing sanity check	2020-02-11 10:07:45 -06:00
Scott Lahteine	fa6e7cb733	Function-style critical section macros	2020-02-11 09:37:04 -06:00
Scott Lahteine	7b02a62da8	Fix up tests	2020-02-11 09:37:04 -06:00
Scott Lahteine	189c101793	Use prior babystep delay method (#16833)	2020-02-11 08:52:11 -06:00
Scott Lahteine	1c556cd90d	Recommend Z Safe Homing ... Co-Authored-By: Vertabreaker <opyrus@hotmail.com>	2020-02-11 07:40:37 -06:00
Scott Lahteine	e442663e2a	No Z sensorless req'd if homing with probe ... Fixes #16674	2020-02-11 04:15:25 -06:00
Scott Lahteine	71539bcbeb	Undo driver type auto-assignment for now ... Good general concept but needs more time to develop and group with a stepper suite.	2020-02-11 02:32:01 -06:00
Giuliano Zaro	d5790e09a5	Update SAMD51 EEPROM repo link (#16832)	2020-02-11 02:05:58 -06:00
thinkyhead	b26f7fca3f	[cron] Bump distribution date (2020-02-11)	2020-02-11 00:04:03 +00:00
Scott Lahteine	2836834d7e	Unify step pulse timing of ISR / babystep (#16813)	2020-02-10 16:58:21 -06:00
proferabg	3f87f912c5	Enable hotend / bed PID separately in ExtUI (#16827)	2020-02-10 16:48:22 -06:00
Scott Lahteine	fa4a6cdb5c	Fix out-of-order M0 after SD printing ... Fixes #14774 Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>	2020-02-10 16:33:40 -06:00
Scott Lahteine	3bef7a4450	Add g-code quoted strings, improve stream code (#16818)	2020-02-10 14:52:15 -06:00
Daniel Mazurkiewicz	e561f744fa	Update MKS BASE and v1.6 pins (#16806)	2020-02-10 14:12:11 -06:00
Scott Lahteine	0b45493557	Add a caution to drivers.h	2020-02-09 21:58:12 -06:00
Scott Lahteine	18a7276909	Revert "Coolstep for TMC2130, 2209, 5130, 5160" ... Reverting #16790 as not ready for primetime.	2020-02-09 21:22:26 -06:00
Scott Lahteine	28b48fc9bb	Revert change to AXIS_DRIVER_TYPE_X2 ... - Revisit this to figure out why it breaks	2020-02-09 20:49:55 -06:00
Scott Lahteine	a33d08928a	Tweak LPC1768 upload py script	2020-02-09 20:48:20 -06:00
thinkyhead	15e6ee6c7c	[cron] Bump distribution date (2020-02-10)	2020-02-10 00:03:46 +00:00
InsanityAutomation	a9549f7a08	Add PID, probe offsets to ExtUI (#16792)	2020-02-09 12:22:53 -06:00
InsanityAutomation	cc1ff27256	Bump config version to 020004 (#16816)	2020-02-09 12:15:02 -06:00
Scott Lahteine	0ce83dee95	Show print time with PRINTER_EVENT_LEDS	2020-02-09 11:37:43 -06:00
Scott Lahteine	38873596ec	Tweak parser warning	2020-02-09 11:37:43 -06:00
Scott Lahteine	ffcbba4447	Move MSG_MARLIN	2020-02-09 11:37:43 -06:00
Scott Lahteine	b9b07387d7	Minor HAL cleanup	2020-02-09 11:12:38 -06:00
Giuliano Zaro	90e2c42031	Adafruit Grand Central M4 fixes (#16812)	2020-02-09 09:57:22 -06:00
InsanityAutomation	84b6e11bd5	Better probe fail handling (#16811)	2020-02-09 07:46:38 -06:00
Fabio Santos	894762259b	Coolstep for TMC2130, 2209, 5130, 5160 (#16790)	2020-02-08 21:01:57 -06:00
thinkyhead	f0cbc85a07	[cron] Bump distribution date (2020-02-09)	2020-02-09 00:03:30 +00:00
Scott Lahteine	130e36d766	Tweak ABL logging, document probing	2020-02-08 17:47:54 -06:00
thinkyhead	38bf5523e1	[cron] Bump distribution date (2020-02-08)	2020-02-08 00:02:22 +00:00
thinkyhead	12b3807a7f	[cron] Bump distribution date (2020-02-07)	2020-02-07 00:02:48 +00:00
Robert Stein	3a3429b1ef	Fix probe with multi-endstops (#16793)	2020-02-06 15:28:46 -06:00
Robby Candra	86812432f3	Remove extraneous Serial init (#16794)	2020-02-06 14:11:49 -06:00
Tanguy Pruvot	54aff83179	G26: Allow to set retraction for UBL mesh test (#16511)	2020-02-05 20:33:39 -06:00
Bob Kuhn	78fea4a9ca	Split up MKS_RUMBA32 into two variants (#16781)	2020-02-05 20:28:28 -06:00
thinkyhead	bb68eaa69e	[cron] Bump distribution date (2020-02-06)	2020-02-06 00:02:49 +00:00
thisiskeithb	9b4192cdd0	Add MKS Base 1.6 board (#16783)	2020-02-04 23:21:05 -06:00
thinkyhead	0ebd2f44d4	[cron] Bump distribution date (2020-02-05)	2020-02-05 00:02:59 +00:00
Scott Lahteine	f312ddfa4f	More updates for 8 extruders, REPEAT	2020-02-04 12:37:20 -06:00
Scott Lahteine	7bf2190f03	Fix CALIBRATION_GCODE pin handling	2020-02-04 08:32:43 -06:00
Scott Lahteine	081ef46e76	Fix Arduino IDE compile for DUE ... Fixes #16767	2020-02-04 08:32:20 -06:00
Scott Lahteine	15b6ad41bc	Fix E stepper stays on bug ... Fixes #16753	2020-02-04 02:39:37 -06:00
Bob Kuhn	0268c1d02c	STM32duino - Use SDIO for onboard SD (#16756)	2020-02-04 01:24:11 -06:00
InsanityAutomation	62d9e3f50e	Force T0 in UBL G29 on all multi-hotend setups (#16774)	2020-02-03 20:58:44 -06:00
Scott Lahteine	3ded99b894	[cron] Bump distribution date	2020-02-03 19:53:30 -06:00
felixstorm	f1dbfaf706	Fix warning for ESP32 (#16771)	2020-02-03 18:36:51 -06:00
ellensp	7d4fa9d504	Fix LCD Z Move character LCD display line (#16772)	2020-02-03 18:35:06 -06:00
Scott Lahteine	bfad23d3e2	(c) 2020	2020-02-03 08:00:57 -06:00
Scott Lahteine	7f9c62437e	Corner Leveling: Add inset for each side (#16759)	2020-02-03 00:00:35 -06:00
Scott Lahteine	72b4d91d2e	Add Z_AFTER_HOMING to raise Z more in G28 (#16755)	2020-02-02 00:02:30 -06:00
Scott Lahteine	ee6003be87	Revert breaking change to _FAN_PWM macro	2020-02-01 23:07:20 -06:00
Scott Lahteine	4716dac874	Apply REPEAT, RREPEAT, and loop macros (#16757)	2020-02-01 21:00:53 -06:00
Scott Lahteine	0e72c315a0	Minor string storage optimization	2020-02-01 20:29:31 -06:00
Scott Lahteine	4937519d51	Fix LPC build with USE_WATCHDOG off	2020-02-01 20:29:31 -06:00
Scott Lahteine	63469ed8f7	Add EXP labels to SKR pins	2020-02-01 19:06:32 -06:00
Scott Lahteine	22556a7bbf	More 8-extruder fixups	2020-02-01 15:19:58 -06:00
Scott Lahteine	c4cbc54484	Suppress a compile warning	2020-02-01 10:38:07 -06:00
Scott Lahteine	7a4758a6a2	Fix RGB / Neopixel white color bug ... See #16752	2020-02-01 10:11:36 -06:00
Scott Lahteine	995a9238b3	Probe singleton patch ... Followup to #16751	2020-02-01 07:57:10 -06:00
Scott Lahteine	5296af94d2	Drop obsolete SD special char handling ... See #14035	2020-02-01 06:49:56 -06:00
Scott Lahteine	0d342bac51	Fix CURRENT_STEP_DOWN compile error	2020-02-01 06:27:17 -06:00
Acenotass	832d33ce9d	Update Russian language (#16750)	2020-02-01 04:53:18 -06:00
Jason Smith	c3cab37d7e	Fix Temperature::over_autostart_threshold (#16749)	2020-02-01 04:51:57 -06:00
InsanityAutomation	e58d1bf974	G34 automatic point assignment (#16473)	2020-02-01 04:50:44 -06:00
Scott Lahteine	90b6324563	Encapsulate probe as singleton class (#16751)	2020-02-01 04:21:36 -06:00
Scott Lahteine	43d3463d5d	Misc cleanup, whitespace	2020-02-01 03:50:42 -06:00
Scott Lahteine	e64b7a3ab2	Clean up i2c encoder, sanitize serial	2020-02-01 00:57:14 -06:00
Jason Smith	9a8de23858	Consistent M112 with Emergency Parser (#16747)	2020-01-31 23:08:37 -06:00
Jason Smith	5b3d968634	Option for Trigorilla 1.4 with add-on endstops board (#16737)	2020-01-31 21:51:59 -06:00
rebel1	300b81bfcb	Fix BTT SKR 1.4 extra endstop pins (#16738)	2020-01-31 21:46:02 -06:00
Acenotass	0a6ae664bd	Update Russian language (#16745)	2020-01-31 21:43:44 -06:00
Scott Lahteine	c4df5cf9a6	Include macros for delta ABC	2020-01-31 04:40:33 -06:00