Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Scott Lahteine
b378deaf89
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
Scott Lahteine
e1c5a43247
Cleanup stepper current control config options
2017-06-07 16:07:38 -05:00
FATALHERMIT
911079104e
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
Scott Lahteine
081bf1f879
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Scott Lahteine
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
Scott Lahteine
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 15:13:47 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
Scott Lahteine
c48901f355
Remove mystery-board 99
2016-12-05 20:16:50 -06:00
Michael Neumann
3890366c83
Update pins.h
2016-11-12 12:25:45 +01:00
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
2016-10-31 08:01:41 -05:00
Scott Lahteine
95275eb9b3
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
Scott Lahteine
b6aa894893
Rename auto fan pins and add auto fan flags
2016-10-26 17:51:26 -05:00
Scott Lahteine
ad64723354
Move MAX_EXTRUDERS to pins.h
2016-10-22 10:07:51 -05:00
Scott Lahteine
47bd142b29
Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?
2016-10-05 06:13:30 -05:00
Scott Lahteine
49d77720d5
More support for 4th extruder or heater
2016-10-05 04:40:22 -05:00
Scott Lahteine
c2f13be750
Mightyboard Revision E
2016-09-25 05:28:04 -05:00
Scott Lahteine
e05af606a8
Clean up probe config options
2016-09-19 00:26:16 -05:00
Scott Lahteine
98437bd488
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
2016-08-06 17:19:12 -07:00
AnHardt
98e96feee9
Repair SPI-pins
...
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
2016-08-06 17:19:11 -07:00
Scott Lahteine
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc
Set flags for RAMPS "type" in pins.h
2016-07-30 04:17:21 -07:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
Scott Lahteine
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
2016-07-25 00:10:46 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Indrek Ardel
ecb23c1b65
Add Cartesio CN Controls V11 board
2016-07-15 12:55:47 +03:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Anthony Birkett
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
2016-07-03 22:09:08 +01:00
Scott Lahteine
593c8bf286
Support for Rigidbot V2
2016-06-27 12:35:20 -07:00
Scott Lahteine
4d2cb70152
Cartesio UI Support
2016-06-15 21:46:54 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
2016-05-18 19:09:09 -07:00
Scott Lahteine
1b90682617
Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins
...
Remove need to define unused pins as -1 in pins files
2016-05-14 15:49:22 -07:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
Scott Lahteine
5ca6334fd2
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 12:38:00 -07:00
Scott Lahteine
5b7a6c217a
Include more fans in sensitive pins list
2016-05-01 13:49:32 -07:00
Scott Lahteine
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-02 16:39:23 -07:00
João Brázio
55a248d6b4
Fixes #3313 : Wrong board def in pins.h
2016-04-02 09:28:58 +01:00
Scott Lahteine
1da9d10173
Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants
2016-04-01 16:54:35 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
Scott Lahteine
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
AnHardt
1b336971ae
Fix lost undef Y_MAX_PIN in pins.h
2016-03-23 12:48:06 +01:00
Stephanie
6843b78f99
Add support for Printrboard RevF
...
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.
The Pins file for the RevF board is included.
2016-03-19 16:43:37 -07:00
Scott Lahteine
eafbc5e0cc
Add AJ4P pins and fix RAMBO pins
2016-03-06 05:52:01 -08:00
Scott Lahteine
50e3482e0a
Handle RAMPS 1.3 as the special case
2016-03-06 05:52:00 -08:00
