thisiskeithb
2603a237f9
Add MKS LCD12864 A/B Controller Support ( #18120 )
2020-06-16 02:43:09 -05:00
Scott Lahteine
f4c258dc23
Creality Ender 3 v2 ( #17719 )
2020-06-16 01:45:27 -05:00
makerbase
642112d3eb
Add MKS UI (TFT_LITTLE_VGL_UI) ( #18071 )
2020-06-15 21:05:33 -05:00
Victor
8358f3eadb
Chitu V5 with extra GPIO init ( #18299 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-15 20:00:44 -05:00
Scott Lahteine
aea60d9450
Clean up trailing spaces
2020-06-15 18:11:32 -05:00
Per Ivar Nerseth
10601a932a
Zonestar P802M bed thermistor ( #18289 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-14 20:09:25 -05:00
Lukas Erlacher
9a52193cc6
Fix GTM32 Rev B LCD pins ( #18293 )
2020-06-14 01:02:04 -05:00
Victor
0a49ad1ccf
TFT 3x upscale followup ( #18256 )
2020-06-11 21:42:19 -05:00
cbaugher
92435ef5ea
Tenlog D3 Hero 7-axis board ( #18263 )
2020-06-11 20:43:28 -05:00
Chris Barr
c12111e2cc
Improve and extend RUMBA32 ( #18249 )
2020-06-11 20:28:20 -05:00
ellensp
2de22aae2d
Melzi (Creality) pins notes ( #18251 )
2020-06-10 17:19:39 -05:00
Victor
e2cc966621
Tronxy X5SA (V5 / V6 boards) ( #18243 )
2020-06-10 17:16:22 -05:00
thisiskeithb
63c280a6ca
Robin E3/E3D EEPROM size ( #18230 )
2020-06-08 19:56:06 -05:00
DocYester
19024306fc
Robin E3D Flash-based EEPROM ( #18219 )
2020-06-07 19:48:18 -05:00
Leo
f350e9d0cb
Shorter BTT board names (for LCD info) ( #18139 )
2020-06-04 21:29:47 -05:00
git-user44
9e2f142391
Clean up Melzi LCD timing defaults ( #18187 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-06-04 19:55:39 -05:00
Scott Lahteine
c9a260ee12
MEEB cleanup, whitespace
...
Followup to #18138
2020-06-02 02:34:08 -05:00
ellensp
33d1e77e2e
Allow pins override of *_TIMER_NUM and HAL_*_TIMER_ISR ( #18128 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-01 18:33:30 -05:00
cccc
2bf63e29c6
Support for MEEB 3DP board ( #18138 )
2020-06-01 18:25:13 -05:00
git-user44
46112b9d50
Adjust Melzi ST display timing ( #18160 )
2020-05-31 00:21:08 -05:00
Scott Lahteine
2ad3da98d4
Fix some spelling
2020-05-30 23:28:30 -05:00
thisiskeithb
3430d45f53
BTT SKR Mini E3 V2 ( #18088 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-05-30 23:27:21 -05:00
invalidflaw
de89a4b7c1
Add PICA Servo / E1 pins ( #18100 )
2020-05-25 17:09:38 -05:00
George Fu
fe7452c5cb
TMC serial multiplexer, FYSETC AIO-II ( #18080 )
2020-05-25 15:48:33 -05:00
thisiskeithb
59dfba3bb8
Fix GTR CR10_STOCKDISPLAY pins ( #18078 )
2020-05-25 15:37:33 -05:00
Scott Lahteine
461647fcee
Use MARLIN_EEPROM_SIZE with E2END as fallback ( #18059 )
2020-05-22 02:15:40 -05:00
Scott Lahteine
31eb487da5
whitespace
2020-05-22 02:02:11 -05:00
thisiskeithb
4e51240563
BTT GTR has I2C EEPROM ( #18029 )
2020-05-20 15:42:45 -05:00
Giuliano Zaro
7b2a056656
Update SAMD-RAMPS runout pin ( #18048 )
2020-05-20 15:31:08 -05:00
Scott Lahteine
e275cd3798
Update some ©
2020-05-17 20:49:24 -05:00
Scott Lahteine
847bdeecaf
BOARD_NAME => BOARD_INFO_NAME
2020-05-16 06:02:55 -05:00
Mika Norén
76a65ffe74
Vertex nano with board K8600 ( #17736 )
2020-05-15 21:11:28 -05:00
Gustavo Alvarez
6d92f56582
FTDI/EVE, pins cleanup for SKR E3/DIP ( #17990 )
2020-05-13 14:22:03 -05:00
RudolphRiedel
98fdc67f1d
Fixes for FYSETC Cheetah ( #17935 )
2020-05-11 23:51:07 -05:00
Jason Smith
4680aa659c
EEPROM Flash Leveling enabled for more STM32F4 ( #17948 )
2020-05-11 01:12:11 -05:00
Bob Kuhn
8f3d17699a
Init all ESP01 (module) WIFI pins ( #17679 )
2020-05-08 02:43:53 -05:00
Scott Lahteine
6be76af617
Overrideable CASE_LIGHT_PIN
2020-05-07 14:57:41 -05:00
Scott Lahteine
1aa9d44783
Format some pins
2020-05-06 01:40:40 -05:00
Gustavo Alvarez
0332666d38
Fix Cheetah pins alias ( #17882 )
2020-05-06 01:16:32 -05:00
Gustavo Alvarez
3fd8ef52c5
More FTDI EVE fixes (RAMPS, Cheetah) ( #17759 )
2020-05-05 02:38:06 -05:00
Scott Lahteine
38d1587091
Malyan M200 V2 ( #17840 )
2020-05-04 14:37:43 -05:00
Scott Lahteine
9a6934874a
Add XYZ_NO_FRAME option
2020-05-03 01:24:39 -05:00
Stephan
120fcd1215
Support GT2560 3rd extruder ( #17797 )
2020-05-02 22:19:05 -05:00
animavitis
3ea1c8a6fa
Support for Ortur 4.3 mainboard ( #17790 )
2020-05-02 22:12:52 -05:00
Dipl.-Ing. Raoul Rubien, BSc
739b738e7f
Permit more Creality pin overrides ( #17820 )
2020-05-02 18:30:23 -05:00
J.C. Nelson
b4aebbe78d
Allow STM32 pins to specify timers ( #17805 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-04-30 22:42:40 -05:00
Giuliano Zaro
0b762189b4
Change RAMPS default filament runout pin ( #17814 )
2020-04-30 18:18:23 -05:00
Scott Lahteine
5e6faa999d
Refine EEPROM types / flags ( #17772 )
2020-04-29 14:46:33 -05:00
ellensp
36adbfa41c
Fix MKS S-Gen standard pins ( #17786 )
...
Fixes #17783
2020-04-29 03:16:13 -05:00
randellhodges
5f7a75979f
LPC176x SPI / I2C PersistentStore ( #17651 )
2020-04-28 02:27:55 -05:00
Warboy1982
7eac76d31b
Patch BLTouch Z_MAX_PIN for GT2560 Rev.A (non-plus) ( #17721 )
2020-04-27 08:38:23 -05:00
Neil van Geffen
c56b66543d
Permit Stall Sensitivity of 0 ( #17722 )
2020-04-27 08:27:14 -05:00
Axel
1752cd4fe5
Add a Mightyboard pin ( #17538 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-04-25 20:03:16 -05:00
Gustavo Alvarez
11f7695907
Touch UI FTDI EVE is now beta ( #17704 )
2020-04-25 11:47:19 -05:00
Scott Lahteine
307c48fe0a
Parity between LPC176x pins
2020-04-25 11:25:05 -05:00
Scott Lahteine
3a27933ae7
Fixes for FYSETC Touch EVE 5" on AVR ( #17659 )
...
Co-Authored-By: RudolphRiedel <rudolphriedel@users.noreply.github.com>
Co-authored-by: sL1pKn07 <sl1pkn07@gmail.com>
2020-04-24 22:35:46 -05:00
Gustavo Alvarez
4af83430b5
ReARM SDSS pin for RRD LCDs ( #17698 )
2020-04-24 22:20:24 -05:00
Scott Lahteine
ab2b98e425
Apply composite tests
2020-04-23 21:53:52 -05:00
Bob Kuhn
88bdd26c99
Clean up SKR Pro v1.1 pins ( #17653 )
2020-04-22 15:04:21 -05:00
Bob Kuhn
33bb7859d4
Composite USB for STM32 SDIO (experimental) ( #17222 )
2020-04-22 15:00:10 -05:00
Scott Lahteine
15f6f53638
Add HAS_HOTEND, etc.
2020-04-20 00:12:22 -05:00
Scott Lahteine
f94ab84dac
Malyan M300 support ( #17421 )
2020-04-17 09:10:41 -05:00
Gustavo Alvarez
e7f3b625b0
Use 'melzi' envs for MELZI_CREALITY ( #17578 )
2020-04-17 07:19:47 -05:00
Scott Lahteine
847ea583f6
STM32F103VE has 512K Flash EEPROM ( #17565 )
2020-04-16 15:34:44 -05:00
InsanityAutomation
d353d67a34
SD detect override for older Creality3D RAMPS ( #17469 )
2020-04-16 04:41:05 -05:00
Bob Kuhn
f5d809f366
SKR Pro 1.1 WiFi and LCD SD card support ( #17531 )
2020-04-16 03:55:33 -05:00
dandantsui
d194688020
Define EEPROM, SD type for MKS Robin nano ( #17498 )
2020-04-16 03:53:58 -05:00
Scott Lahteine
1c43870cec
Add chamber to sensitive pins
2020-04-16 03:31:44 -05:00
Scott Lahteine
03020dd31e
Use the common pattern for auto fan pins
...
Now that pins.h is guaranteed included after configs.
2020-04-16 03:31:44 -05:00
Scott Lahteine
3a9f8a00bf
Fix SD connection for some boards
2020-04-16 03:31:44 -05:00
Scott Lahteine
880f63b008
It looks like HAS_ONBOARD_SD is obsolete
2020-04-16 03:31:44 -05:00
mks-viva
bc856fd8ec
MKS Robin E3 / E3D support ( #17569 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-16 01:19:24 -05:00
Scott Lahteine
cdbc7cc52c
Define En DIAG pins for auto-assigns
2020-04-14 19:09:06 -05:00
Alexander Amelkin
cae2b7bf4e
SKR Pro V1.1 StallGuard pins ( #17550 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-14 19:05:08 -05:00
dandantsui
333092c488
Fix MKS Robin infinite boot ( #17497 )
2020-04-12 01:23:08 -05:00
Scott Lahteine
fad9235cd8
Move MSG_x_LINE to multi_language.h
2020-04-05 18:25:59 -05:00
Scott Lahteine
723d4d6f61
Fix Archim 2 build for PIO
2020-04-04 02:18:33 -05:00
Scott Lahteine
e7f020f3f2
Shorten some internal pin names
2020-03-31 14:43:01 -05:00
Scott Lahteine
9b886c2ad4
Load balance some tests
2020-03-29 18:14:15 -05:00
oscarsan1
b35dc5f0b4
Fix Trigorilla 1.4 missing spaces
2020-03-29 13:46:03 -05:00
InsanityAutomation
de648bfdc1
Add Funmat HT V4.0 board support ( #17305 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-27 21:08:47 -05:00
Giuliano Zaro
129b270628
QSPI EEPROM for SAMD51 ( #17292 )
2020-03-27 17:29:17 -05:00
Roxy-3D
075a86b076
Update LCD timing on Formbot T-Rex 2+ machines
...
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.
2020-03-24 17:15:03 -05:00
Scott Lahteine
7455bb09b3
Add SoftwareSerialM for MKS Robin ( #17207 )
2020-03-24 16:14:30 -05:00
RasmusAaen
717c216851
Fix Copymaster Y_MAX pin ( #17267 )
2020-03-23 17:34:38 -05:00
Scott Lahteine
2c325c2a7d
Format some pins files
2020-03-21 21:18:46 -05:00
Scott Lahteine
e62b52da99
Use pin/port names for CHITU pins
2020-03-21 21:18:46 -05:00
Scott Lahteine
04cea864bc
Split up STM32 pins files ( #17212 )
2020-03-20 23:45:00 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Scott Lahteine
e8205af6fb
Apply HAS_TMC_UART to pins files
2020-03-17 15:06:01 -05:00
Karl Andersson
e5dcab8fd2
ARMED support for TMC UART, probe temp ( #17186 )
2020-03-17 15:05:12 -05:00
ellensp
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin ( #17191 )
2020-03-17 14:51:57 -05:00
Scott Lahteine
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 ( #17187 )
2020-03-16 17:49:33 -05:00
Scott Lahteine
b14c933171
LPC1768 EEPROM fallback to flash, add overrides ( #17184 )
2020-03-16 15:59:05 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
Scott Lahteine
982197b162
Fixes for Z4 axis, CS pins ( #17097 )
2020-03-08 16:31:37 -05:00
Scott Lahteine
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
Scott Lahteine
3db784f3c7
More pins debugging cleanup
2020-03-07 02:15:05 -06:00
Scott Lahteine
e9f451bffe
Pins debug followup
2020-03-06 21:59:20 -06:00
Scott Lahteine
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
Scott Lahteine
6cd99e6a77
Add pins to the pins debug list
2020-03-06 13:14:22 -06:00
Scott Lahteine
c0801e900d
Define Z_MIN_PROBE_PIN for Cohesion 3D Remix
2020-03-05 15:10:46 -06:00
Scott Lahteine
e3da86fb45
Fix SKR test for ONBOARD SD
2020-03-05 13:37:09 -06:00
Scott Lahteine
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 ( #17063 )
2020-03-04 13:12:48 -06:00
Scott Lahteine
72b63e9520
Fix TEMP_PROBE_PIN for SKR 1.4
...
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>
2020-03-03 14:53:22 -06:00
George Fu
a698bfdc2a
Update FYSETC S6 pins/variants ( #17056 )
2020-03-03 14:30:09 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
736521a3f1
Balance mega tests, shorten some env names
2020-03-01 21:20:22 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
Jason Smith
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD ( #17038 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-01 19:54:22 -06:00
ellensp
4b256a6fa8
Revert FYSETC Mini encoder change ( #17040 )
...
Reverting #17010
2020-03-01 17:59:00 -06:00
Vert
6c9ca1bec2
Clarify GT2560 common pins ( #17021 )
2020-02-29 04:35:10 -06:00
ellensp
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 ( #17010 )
2020-02-28 12:26:54 -06:00
Scott Lahteine
633b716a3a
Define DIAG pins for MKS SGen-L
2020-02-26 11:35:07 -06:00
InsanityAutomation
28008aced0
Correct SKR expansion port pins ( #16974 )
2020-02-26 04:18:34 -06:00
ellensp
70af080813
Add LPC1768 Serial ports for pinsDebug ( #16980 )
2020-02-26 04:12:53 -06:00
Scott Lahteine
5b438fb20d
HAS_SDCARD_CONNECTION is more obsolete
2020-02-25 22:30:30 -06:00
InsanityAutomation
6bfae5de6f
Fix SKR 1.4 Turbo SD_DETECT_PIN ( #16955 )
2020-02-25 03:17:08 -06:00
Scott Lahteine
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
ZMiguel Alves
2471a8bb91
Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 ( #16928 )
2020-02-22 18:45:10 -06:00
vivian-ng
eeec4c27e7
[ESP32] Allow user to define pins for hardware Serial1 and Serial2 ( #16918 )
2020-02-22 04:00:10 -06:00
Scott Lahteine
5d16497bed
Tweak pins spacing, comments
2020-02-21 08:33:11 -06:00
ellensp
9f53bbd791
Add PICA shields support ( #16891 )
2020-02-21 08:27:32 -06:00
Scott Lahteine
2b788e9aa6
Single envs for specific boards
2020-02-20 20:20:15 -06:00
Scott Lahteine
1087e318e5
Fix a BORG compile warning
2020-02-15 01:47:15 -06:00
George Fu
63dd0f249d
Fysetc S6 pins / LCD updates ( #16830 )
2020-02-14 07:18:57 -06:00
Giuliano Zaro
ff0c931e47
Add RAMPS 1.4.4 to AGCM4 ( #16606 )
2020-02-13 23:28:18 -06:00
Scott Lahteine
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
Daniel Mazurkiewicz
e561f744fa
Update MKS BASE and v1.6 pins ( #16806 )
2020-02-10 14:12:11 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
Bob Kuhn
78fea4a9ca
Split up MKS_RUMBA32 into two variants ( #16781 )
2020-02-05 20:28:28 -06:00
thisiskeithb
9b4192cdd0
Add MKS Base 1.6 board ( #16783 )
2020-02-04 23:21:05 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Bob Kuhn
0268c1d02c
STM32duino - Use SDIO for onboard SD ( #16756 )
2020-02-04 01:24:11 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
63469ed8f7
Add EXP labels to SKR pins
2020-02-01 19:06:32 -06:00
Scott Lahteine
43d3463d5d
Misc cleanup, whitespace
2020-02-01 03:50:42 -06:00
Jason Smith
5b3d968634
Option for Trigorilla 1.4 with add-on endstops board ( #16737 )
2020-01-31 21:51:59 -06:00
rebel1
300b81bfcb
Fix BTT SKR 1.4 extra endstop pins ( #16738 )
2020-01-31 21:46:02 -06:00
Scott Lahteine
62f52ebb3a
Fix up, improve endstop pin auto-assignment
...
Followup for #16723
2020-01-30 14:09:33 -06:00
Scott Lahteine
e8e25b80d1
Extend RX/TX pins for up to 8 extruders
2020-01-30 13:29:19 -06:00
Robert Stein
2822c0890a
Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo ( #16727 )
2020-01-30 13:17:15 -06:00
Scott Lahteine
5b12627e14
Auto assign DIAG pins for multi-endstop ( #16723 )
2020-01-30 03:24:57 -06:00
Mauro
1bc6509d02
Support for E4d@BOX mainboard ( #16716 )
2020-01-30 03:06:17 -06:00
Scott Lahteine
e8ed4329ea
Cleanup of old includes, add comments
2020-01-29 22:41:18 -06:00
Scott Lahteine
2325bede8a
Fix Trigorilla 1.4 limit switches
...
See #16612
2020-01-26 21:08:55 -06:00
ellensp
0949c0f326
SKR 1.3 sensorless endstops hack ( #16659 )
2020-01-26 03:49:11 -06:00
ellensp
4a71285c34
Fix Serial defines for M43 on AVR ( #16649 )
2020-01-26 03:05:34 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
Bob Kuhn
1a5cbc9052
Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning ( #16621 )
2020-01-20 18:33:36 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
thisiskeithb
3b34fbd4c4
Update BTT002 pins ( #16591 )
2020-01-19 22:21:32 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
vivian-ng
e94f782f51
Shared SPI sanity check ( #16581 )
2020-01-17 02:54:22 -06:00
Bob-the-Kuhn
0d0dfba203
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. ( #16579 )
2020-01-17 02:44:01 -06:00
Jason Smith
c305c2cc6b
Fix some warnings, Melzi pins
2020-01-15 19:57:16 -06:00
thisiskeithb
7eed008e8e
Use Flash EEPROM on BTT002 ( #16558 )
2020-01-15 01:27:32 -06:00
Bob Kuhn
53dfeed6c0
Steval_3DP001V1 timers, analog inputs, etc. ( #16565 )
2020-01-14 23:19:13 -06:00
Scott Lahteine
0e6ef65aec
Clean up whitespace
2020-01-13 16:56:56 -06:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
ellensp
994c695862
Fix MKS_SGEN sanity check ( #16501 )
2020-01-07 21:47:45 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
George Fu
ceeba58dc9
FYSETC F6 v1.4 board support ( #16321 )
2020-01-03 20:29:25 -06:00
ellensp
d7aee3b7b6
Pins debugging AVR serial pins ( #16437 )
2020-01-03 17:40:56 -06:00
thisiskeithb
64fdc4f24b
BTT002: Add runout, PLR, and RGB pins ( #16442 )
2020-01-03 17:38:15 -06:00
Jason Smith
595e684658
Add Leapfrog Xeed 2015 support ( #16400 )
2020-01-02 22:04:13 -06:00
ellensp
7a50dbc00d
Add motherboard BIGTREE_SKR_V1.4_TURBO ( #16374 )
2020-01-02 21:15:34 -06:00
Scott Lahteine
a2cda631d9
Clean up trailing whitespace
2020-01-02 16:33:50 -06:00
Alexander Gavrilenko
c6f7ea9f22
MKS Robin ILI9328 TFT support ( #16401 )
2020-01-01 20:55:37 -06:00
Bob Kuhn
747b2b9bf4
Improve STEVAL_3DP001V1 and future STEVAL_* support ( #16404 )
2020-01-01 20:52:56 -06:00
Luu Lac
baa101253a
MKS Robin 2 (STM32F407ZE) base support ( #16270 )
2019-12-22 18:16:08 -06:00
ferengi82
2230ef6e09
MKS SGen-L pins EEBF or EFBF scheme ( #16296 )
2019-12-22 17:11:49 -06:00
FLYmaker
59f9bb2120
Add FLYBOARD (STM32F407ZG) ( #16257 )
2019-12-22 03:05:30 -06:00
Luc
a3d88aebed
Add MRR_ESPA/_ESPE (ESP32) boards ( #16238 )
2019-12-21 18:58:00 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
Mario Costa
5f06f42ccd
Spindle/Laser pins for RADDS ( #16119 )
2019-12-19 02:37:07 -06:00
Vertabreaker
e0c71344ed
Define more FAN pins for GT2560 ( #16235 )
2019-12-15 20:28:55 -06:00
chzj333
42a336f8bc
Update BTT002 platform (fixing SD init) ( #16217 )
2019-12-15 12:24:54 -06:00
Tanguy Pruvot
a0badf572e
STM32 Touch UI timings, Longer onboard pullups ( #16219 )
2019-12-15 12:03:39 -06:00
thisiskeithb
a358b72ec8
Add SKR Mini E3 + Zonestar LCD warning ( #16214 )
2019-12-15 12:02:20 -06:00
thisiskeithb
dc8d8cb39c
Fix MKS SGen-L SD detect pin ( #16224 )
2019-12-15 11:25:07 -06:00
Anders Sahlman
3d4aa015a8
Add MKS Robin Mini EEPROM defines ( #16203 )
2019-12-12 16:35:46 -06:00
ManuelMcLure
b065a60dd0
Onboard (always-on) pullups support ( #16144 )
2019-12-12 15:49:14 -06:00
thisiskeithb
98814e1c47
MKS 12864 OLED pins for SGEN-L ( #16188 )
2019-12-11 02:18:21 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
Anders Sahlman
1bcd47e65f
Correct MKS Robin Mini pins ( #16178 )
2019-12-10 23:32:11 -06:00
Antti Andreimann
1465fc0632
Fix controller and SD on Robin Nano ( #16187 )
2019-12-10 23:29:33 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
ellensp
cb4cd76086
Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 ( #16081 )
2019-12-03 06:44:36 -06:00
Scott Lahteine
6134bff81b
Expand environments in platformio.ini
2019-12-02 21:19:23 -06:00
Vertabreaker
3874f4a097
Geeetech A30 / GTM32 support ( #16071 )
2019-12-01 21:25:45 -06:00
hammerhead2k2
19f840a9b5
BTT SKR 1.3 pins for Anet Full Graphics LCD ( #16047 )
2019-11-30 08:21:54 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
2d74c2042a
Clean up whitespace, GTM32 pins
2019-11-29 20:05:32 -06:00
Vertabreaker
1803f672f8
Pins for GTM32 board variants ( #16020 )
2019-11-29 07:12:49 -06:00
Jason Smith
ce9a4afe95
Better ST7920 timings for FYSETC S6 ( #16022 )
2019-11-27 01:26:21 -06:00
Dirk O. Kaar
0550f30790
Renkforce configuration updates ( #16017 )
2019-11-26 20:22:17 -06:00
Vertabreaker
12417d087b
E2 pins for GT 2560 v3 ( #16016 )
2019-11-26 17:43:27 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3
Renkforce RF100 (V1), V2, XL, and XL Plus ( #15695 )
2019-11-26 14:06:23 -06:00
thisiskeithb
f786cc5145
Revert default BTT STM32F103 environment ( #16006 )
2019-11-26 04:28:13 -06:00
madmattco
049e8d5963
Add VAKE / VAKE403D support ( #15631 )
2019-11-26 04:00:59 -06:00
Heilig Benedek
993802c404
Fix Ender 2 display SCK, BTN_ENC pins ( #15997 )
2019-11-26 03:48:21 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
pfillion42
4a5dee6356
(SKR 1.3) Assign DIAG pins for homing dir ( #15972 )
2019-11-23 16:20:13 -06:00
Scott Lahteine
8f09d2e790
Add STM32F103RE_bigtree to Auto Build
2019-11-22 16:47:31 -06:00
Gustavo Alvarez
b2a275891c
Support RET6 in BTT SKR Mini ( #15957 )
2019-11-21 05:09:01 -06:00
Daniel Negut
a3229b30ec
Add Zonestar/Anet LCD for SKR mini E3 ( #15931 )
2019-11-20 00:06:26 -06:00
TheAssassin
814d908a8a
Ender-2 LCD on BTT SKR E3 ( #15924 )
2019-11-19 23:21:27 -06:00
thisiskeithb
0f57818f2d
Support 512K "RCT6" in BTT SKR Mini ( #15890 )
2019-11-15 02:51:26 -06:00
Robby Candra
fcfde7c2f5
Only assign CS/RX/TX on extra axes with SPI/UART ( #15886 )
2019-11-13 02:03:34 -06:00
Scott Lahteine
624336f453
Fix up Megatronics 3.2 test
2019-11-10 16:19:57 -06:00
Jademalo
37874a6472
Fix E0_SERIAL_RX_PIN typo ( #15841 )
2019-11-09 22:51:20 -06:00
Marcelo Cerri
b9d351899a
Update SKR mini E3 1.2 Filament Runout pin ( #15843 )
2019-11-09 22:49:33 -06:00
Scott Lahteine
7010f92c4b
Board-based LCD delays
2019-11-09 22:33:38 -06:00
Scott Lahteine
9ca25118d0
Whitespace cleanup
2019-11-09 21:17:52 -06:00
Marvin Sinister
8d157a4520
Fix MKS MINI12864 on SKR 1.3 ( #15836 )
2019-11-07 19:39:08 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
Axel
786617e375
Fix RAMPS + VIKI i2c ( #15811 )
2019-11-06 16:52:28 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
ellensp
f088c6a850
Add MKS_GEN_L_V2 controller support ( #15793 )
2019-11-04 16:31:27 -06:00
Scott Lahteine
55991962be
Patch extra axis MS pins for debugging
2019-11-04 12:28:10 -06:00
Chris Pepper
b9116d4050
LPC176x Framework update ( #15722 )
...
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Aurawin
b09b469dd5
Add BIQU TANGO V1 support ( #15682 )
2019-10-28 18:21:59 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Scott Lahteine
9e8021d6a4
Fix pins debug of CS/MS pins
2019-10-26 18:46:39 -05:00
Tanguy Pruvot
c58cc113dd
MKS Robin: restore the TFT v2.0 support (ST7789V) ( #15675 )
2019-10-25 19:30:43 -05:00
Scott Lahteine
f8ad15fde8
Rename BOARD_STM32F4 to fix use with MB()
2019-10-25 18:12:29 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Scott Lahteine
3949d246df
Fix ESP32 name conflict
2019-10-15 17:13:07 -05:00
Jason Smith
53abfdc2c3
Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards ( #15547 )
2019-10-15 14:18:46 -05:00
Piotr
fe4c69b64a
Poll *all* enabled endstop pins ( #15525 )
2019-10-15 13:28:04 -05:00
Gustavo Alvarez
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
chzj333
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
Tanguy Pruvot
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
Me No Dev
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
LinFor
e854eb933d
Allow pins overrides for SKR V1.3 ( #15451 )
2019-10-05 20:40:01 -05:00
Daniel Andersen
0076e1e792
Fix CR10 Stock Display timing with SKR_PRO V1.1 ( #15446 )
2019-10-05 20:33:46 -05:00
Tanguy Pruvot
895f64fbab
Add missing MKS Robin TOUCH_CS_PIN ( #15445 )
2019-10-04 01:51:07 -05:00
tonokip
df48ef6df3
Fix step timer on Archim1 ( #15447 )
2019-10-03 03:29:15 -05:00
Scott Lahteine
a9c259c77a
Patch PrintrboardG2 build (on spec)
2019-09-30 02:47:55 -05:00
