zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
1925 commits 1 branch 0 tags 156 MiB
Commit graph

1538 commits

Author SHA1 Message Date
alexborro 80b17ab573 Merge pull request #1285 from drf5n/PID_CI_v2 
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
 2015-01-01 22:56:21 -02:00
David Forrest 625860f086 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-01 19:24:42 -05:00
David Forrest 6583bb781d temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-01 19:11:42 -05:00
Lane Roberts 2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats. 
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
 2014-12-31 12:34:59 -06:00
Grogyan 6b82415c81 Update pins.h 
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
 2014-12-31 13:04:16 +13:00
Bo Herrmannsen 692a01b1c7 Merge pull request #1277 from thinkyhead/fix_regressions 
Fix regressions affecting compilation
 2014-12-30 16:49:08 +01:00
Scott Lahteine 2ec2bf1564 Fix regressions affecting compilation 
This fixes two regressions, caused by #1167 and #1191 .
 2014-12-30 07:36:18 -08:00
Scott Lahteine e7db8ee9e5 ftostr32np > ftostr32sp 
sp=space-padded, similar to: ns=no-sign
 2014-12-30 07:26:25 -08:00
Scott Lahteine 10e1b6ef8b Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:25 -08:00
Scott Lahteine d1f21d1189 As it should be 2014-12-30 07:26:25 -08:00
Scott Lahteine 449dad71f2 Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:24 -08:00
Scott Lahteine a2109cb492 Patch to make Z look more like X and Y on UltraLCD 2014-12-30 07:26:24 -08:00
Bernhard Kubicek 3d1da45f3e Update Marlin.h 2014-12-30 08:30:37 +01:00
bkubicek d02daec08f fixed compilation 2014-12-30 08:04:06 +01:00
Caleb Anderson 991a74b75b Move delta calibration menu to sample delta configuration. 
Turn off by default.
 2014-12-29 18:03:56 -07:00
Bo Herrmannsen 67fd8f0727 Merge pull request #1267 from RobotCaleb/LanguageFix 
Language Fix - Using the new language implementation wasn't behaving as expected.
 2014-12-29 19:49:11 +01:00
Caleb Anderson 236db44669 Fix spacing 2014-12-29 10:44:55 -07:00
Caleb Anderson e6774fb7d2 Using the new language implementation wasn't behaving as expected. 
No matter what LANGUAGE_CHOICE was set to it would always take the en branch.
I revamped it a bit to use a macro to create the language include file name. This required a slight tweak to the RU declaration since it's special-cased in a couple places in code.

This is an attempt to pull my changes from #1222 over.
 2014-12-29 10:43:19 -07:00
Caleb Anderson cb047e9070 Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently) 2014-12-29 10:19:25 -07:00
Caleb Anderson 5b336a4cdb Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
 2014-12-29 10:13:00 -07:00
Bernhard Kubicek 10ad9f1062 Addes servo0 pin ultimaker 2014-12-29 17:27:14 +01:00
Bernhard Kubicek f24c5d82e3 Update Marlin_main.cpp 
fixed minor typo
 2014-12-29 17:17:30 +01:00
Wurstnase 8a6f098cc6 Expand manage_inactivity #1264 
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
 2014-12-29 17:07:22 +01:00
Wurstnase d1995aec7a Rename ignore_blocks_queued 
more speaking name
 2014-12-29 16:47:08 +01:00
Wurstnase 4122de9d17 change filament issue 
make a more general solution
 2014-12-29 16:31:00 +01:00
wgm4321 d60efc3b5d Fix syntax error caused by previous changes. 2014-12-28 20:47:59 -05:00
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development 
Tested for SAV MKI and SAV 3D LCD on lewihe.
 2014-12-28 19:54:06 +01:00
Matthew Schick 0468f81950 Update for pull request #837 2014-12-28 11:22:44 -05:00
Matthew Schick 6e42c9e305 Add fwretract settings to M503 output 2014-12-28 11:22:44 -05:00
alexborro 3afe66bb0c Fix issues #1248, #1240 
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
 2014-12-28 13:27:39 -02:00
Lukas Obermann 9eb6df17a7 Consider negative Z Offsets when auto bed leveling is active 2014-12-28 12:46:35 +01:00
Bo Herrmannsen c9f60183a9 Merge pull request #1233 from NarimaanV/Development 
Fixed BABYSTEPPING feature
 2014-12-28 10:13:21 +01:00
Bo Herrmannsen 0d957872a0 Merge pull request #1234 from gregrebholz/issue_1069 
Fixes #1069.  Added "auto fan" checks to PID_autotune.
 2014-12-28 10:12:08 +01:00
Bo Herrmannsen 9c07d28bd6 Merge pull request #1249 from drf5n/PID_CI_v2 
temperature.cpp: Add Conditional Integration to prevent excessive integral windup
 2014-12-28 10:09:25 +01:00
Bo Herrmannsen 23e768dffa Merge pull request #1250 from chertykov/Development 
Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp
 2014-12-28 10:09:08 +01:00
Scott Lahteine 2f467e2797 LCD Progress Bar 2014-12-27 22:26:14 -08:00
Denis Chertykov 050ca9ca13 Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp 2014-12-28 09:09:42 +03:00
David Forrest cf52c48d19 Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX. 
Current defaults are all 255.  If it makes sense to reduce them, they should come down together, and
be in a  PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.
 2014-12-27 15:26:09 -05:00
David Forrest 984177c40c temperature.cpp:Add PID Conditional integration on heated bed. 2014-12-27 15:26:09 -05:00
David Forrest c9b8435749 heater.c: Limit PID I term with conditional integration. 2014-12-27 15:26:09 -05:00
Greg Rebholz 7ecb7cbd46 Added "auto fan" checks to PID_autotune 2014-12-23 23:50:00 -05:00
NarimaanV 7667949aca Fixed BABYSTEPPING feature 
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
 2014-12-23 12:49:54 -05:00
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
Bo Herrmannsen 60628864ca Merge pull request #1167 from thinkyhead/sd_freemem 
Use SdFatUtil::FreeRam() for freeMemory() if there
 2014-12-20 18:31:21 +01:00
Bo Herrmannsen 889d7ba218 Merge pull request #1177 from martin-pr/probing_z_speed 
Split do_blocking_move() to XY and Z sections
 2014-12-20 18:30:35 +01:00
Bo Herrmannsen 5e7bd2dc87 Merge pull request #1200 from chertykov/Marlin_v1 
Fix syntax errors in #ifdef
 2014-12-20 18:29:39 +01:00
Denis Chertykov b086394178 Fix syntax errors in #ifdef. 2014-12-20 19:33:43 +03:00
John Davis 39d28a9bbf Update qr_solve.h 
Changed level to compensation
 2014-12-19 17:53:55 -05:00
John Davis 6325968a39 Update qr_solve.cpp 
Changed leveling to compensation
 2014-12-19 17:52:13 -05:00
John Davis e99f24ff2f Update planner.h 
Changed level and leveling to compensation.
 2014-12-19 17:51:14 -05:00
John Davis ac204028e7 Update planner.cpp 
Changed level and leveling to compensation
 2014-12-19 17:49:22 -05:00
John Davis 4315c2547a Update Marlin_main.cpp 
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
 2014-12-19 17:41:29 -05:00
John Davis f21c65918f Update Servo.h 
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
 2014-12-19 17:20:09 -05:00
John Davis 58c4473bea Update Servo.cpp 
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
 2014-12-19 17:18:55 -05:00
John Davis 825c46024d Update vector_3.cpp 
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
 2014-12-19 17:16:31 -05:00
John Davis cfe80e1def Update vector_3.h 2014-12-19 17:14:35 -05:00
John Davis 7464d3c96a Update ConfigurationStore.cpp 
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
 2014-12-19 17:08:43 -05:00
John Davis 81568c3c6d Update Configuration.h 
Changed Auto Bed Level to Auto Bed Compensation
 2014-12-19 17:06:56 -05:00
Bo Herrmannsen 03e489aaad Merge pull request #1197 from foosel/fix/issue_1147 
Fixes commands not being acknowledged in the same order they are received in
 2014-12-19 14:39:05 +01:00
Gina Häußge acc0e75279 Fixes commands not being acknowledged in the same order they are received 
in

G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.

This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.

Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.

Fixes ErikZalm/Marlin#1147
 2014-12-19 14:20:36 +01:00
daid 17de96ace7 Merge branch 'Marlin_v1' into revert-1154-sd_sorting 
Conflicts:
	Marlin/cardreader.cpp
	Marlin/cardreader.h
 2014-12-18 23:13:50 +01:00
Scott Lahteine 6880e93b75 Happy configs 2014-12-18 14:02:47 -08:00
Scott Lahteine 3b1f186c0c Clean up configs 2014-12-18 13:59:31 -08:00
Scott Lahteine f83d0f2a68 Defines for electronics boards 
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
 2014-12-18 13:59:31 -08:00
Bo Herrmannsen bd25e7393b Merge pull request #1192 from thinkyhead/split_language 
Split up languages.h. Use ISO language codes.
 2014-12-18 22:26:55 +01:00
Bo Herrmannsen 174f8d3631 Added example configs for printers from http://tvrrug.org.uk/ 2014-12-18 20:34:24 +01:00
Scott Lahteine e970461adb Clean up, move unused to the bottom, add headings 2014-12-18 10:33:00 -08:00
Scott Lahteine 0c06e97e98 Split up languages.h, use ISO codes 
Breaking up languages.h makes it easier to translate. Using language
codes makes it easier to select a language and sets the naming standard.
 2014-12-18 09:31:19 -08:00
Bo Herrmannsen a9c334e8bc Merge pull request #1191 from thinkyhead/code_shrink 
Shrink and Optimize
 2014-12-18 17:23:11 +01:00
Bo Herrmannsen 842da54e68 Merge pull request #1187 from thinkyhead/fix_constants 
A few constants where they belong
 2014-12-18 17:21:46 +01:00
Scott Lahteine 07c6b5ab71 Using axis constants 2014-12-18 08:13:08 -08:00
Scott Lahteine 1857e611d3 Other small tweaks 2014-12-18 07:49:16 -08:00
Scott Lahteine 63e1665fa9 Reduce ultralcd.cpp redundancies 2014-12-18 07:30:05 -08:00
Scott Lahteine e69313fc2b Reduce dogm lcd code 2014-12-18 07:03:40 -08:00
Bo Herrmannsen bd22405412 Merge pull request #1190 from thinkyhead/sd_sorting 
Wrap call to flush_presort
 2014-12-18 12:50:55 +01:00
Scott Lahteine 49791949af Wrap call to flush_presort 2014-12-18 03:47:12 -08:00
Scott Lahteine 0450e83fa5 Use SdFatUtil::FreeRam() for freeMemory() if there 2014-12-17 23:26:52 -08:00
Scott Lahteine f21cce0b28 Rebase to Marlin_v1 2014-12-17 23:07:36 -08:00
Scott Lahteine e4b98011cf And one more... 2014-12-17 23:01:24 -08:00
Scott Lahteine 60598b4cdd A few constants where they belong 2014-12-17 23:01:24 -08:00
Bo Herrmannsen 280504e2e0 Merge pull request #908 from alromh87/Marlin_v1 
Support for Gen3 Monolithic electronics
 2014-12-17 22:28:07 +01:00
Bo Herrmannsen 31ca3de72f Merge pull request #819 from neildarlow/Marlin_v1 
Activate LiquidTWI2 device detection and space-pad LCD status line.
 2014-12-17 21:42:53 +01:00
Bo Herrmannsen e83cfc0a62 Merge pull request #1163 from thinkyhead/lcd_abort_message 
LCD "Abort" Message
 2014-12-17 21:30:19 +01:00
Bo Herrmannsen 0b310ab6c5 Merge pull request #1153 from xinfab/negative_values_in_menu 
Negative values in menu
 2014-12-17 20:58:01 +01:00
Bo Herrmannsen 91d740e128 Merge pull request #1141 from filipmu/Filament-Sensor 
Display filament sensor data on a 20x4 LCD or Graphical LCD
 2014-12-17 20:38:30 +01:00
alexborro ab355a90d3 Revert "SD Sort and Buffer" 2014-12-17 14:50:59 -02:00
Scott Lahteine d088b5f30f Remove debug echo 2014-12-13 06:33:12 -08:00
Scott Lahteine 1fad8e6a81 Proper long file name var 2014-12-13 06:17:00 -08:00
Scott Lahteine 29e854c535 Disable SDCARD_SORT_ALPHA by default 
For legacy boards it’s better if this option is disabled.
 2014-12-13 06:12:34 -08:00
Scott Lahteine 6599adc184 Polish up a little... 2014-12-13 06:12:34 -08:00
Scott Lahteine a12eec33e2 Completed SORT_USES_MORE_RAM implementation 
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
 2014-12-13 06:12:34 -08:00
Scott Lahteine c9486ebb85 Improvements, more SORT_USES_MORE_RAM 
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
 2014-12-13 06:12:33 -08:00
Scott Lahteine b6ffea612a Expand on More RAM concept, address minor bugs 2014-12-13 06:10:44 -08:00
Scott Lahteine 8196b36ad9 SD Card Alpha Sorting 
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
 2014-12-13 06:07:52 -08:00
Scott Lahteine cf749dbeda Completed SORT_USES_MORE_RAM implementation 
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
 2014-12-13 06:03:39 -08:00
Scott Lahteine ae081d0fe0 Improvements, more SORT_USES_MORE_RAM 
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
 2014-12-13 06:03:39 -08:00
Scott Lahteine 785143a013 Expand on More RAM concept, address minor bugs 2014-12-13 06:03:39 -08:00
Scott Lahteine 0cbbba08bd SD Card Alpha Sorting 
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
 2014-12-13 06:03:39 -08:00
Scott Lahteine 3ebfd29312 Print a message when printing is aborted 
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
 2014-12-13 06:01:46 -08:00
Martin Prazak 2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 2014-12-07 15:31:46 +00:00
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-12-04 21:09:03 +00:00
Bo Herrmannsen edfcf3b527 Toshiba Stepper Driver support 
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
 2014-12-03 15:01:52 +01:00
Bo Herrmannsen c429a4b3ec Toshiba Stepper Driver support 
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
 2014-12-03 14:37:16 +01:00
nothinman 1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better 
M0/M1 Message Fix
 2014-11-28 16:44:29 +00:00
Scott Lahteine 7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
nothinman 5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better 
M0-M1 Enhancements
 2014-11-28 11:01:24 +00:00
elgambitero 433ac29d31 Updated a bit of spanish language 2014-11-27 22:02:49 +01:00
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine d12b24758a Clear LCD to welcome_msg if not printing 
The welcome message is more appropriate than “resuming print” if
nothing is printing.
 2014-11-26 21:05:11 -08:00
Scott Lahteine 3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine 92e21d3ee2 M0-M1 Enhancements 
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
 2014-11-26 21:05:10 -08:00
Lionello Lunesu 0d35b1d0b8 Allow negative values in menus 2014-11-25 18:34:02 +08:00
Jonas 0d97dec434 Adaption of LCD info screen 
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
 2014-11-12 17:10:48 +01:00
Filip Mulier 3b1ab84536 Display Filament Sensor data on graphic LCD 
Added support to show the filament width on the status line of the
graphic LCD.  The status will show for 5 sec and then switch over to
data.  Status can be seen by clicking the button.
 2014-11-10 21:46:37 -06:00
Filip Mulier d84934d8c5 Display Filament Sensor data on 20x4 LCD 
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD.  The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed.  The status message can be seen by
re-selecting the info screen in the menu.
 2014-11-10 21:43:58 -06:00
Filip Mulier 5c8107bcdd Commented out FILAMENT_SENSOR #define 
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default.  Code does not work on all hardware variants.
 2014-11-09 13:26:02 -06:00
David 377dfb182f Updated example configurations for Delta printers 2014-11-02 21:04:54 +00:00
Neil Darlow b81021f475 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-21 12:06:56 +01:00
Erik van der Zalm 724197454c Merge pull request #1104 from ch100/Marlin_v1 
Fixed typo.
 2014-10-11 23:10:00 +02:00
Erik van der Zalm 058e446531 Merge pull request #1037 from filipmu/Filament-Sensor 
Support for a filament diameter sensor
 2014-10-11 22:56:01 +02:00
Christian Inci 110c5dcf23 Fixed typo. 
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
 2014-10-11 00:25:36 +02:00
Matt Stultz ca30aee903 Fix "add_homeing" to "add_homing" to match changes 2014-10-07 00:16:27 -04:00
Erik van der Zalm 0733825fb1 Merge pull request #1099 from Fourmi/Marlin_v1 
Update line 627 ,wrong number on thermistortables
 2014-10-06 14:36:00 +02:00
Fourmi af3e4d7510 Update line 627 ,wrong number on thermistortables 
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
 2014-10-06 14:21:44 +02:00
Erik van der Zalm aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1 
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
 2014-10-06 13:41:38 +02:00
Erik van der Zalm b360306881 Merge pull request #1073 from WingTangWong/wing-fix-float-delta 
Wing fix float delta
 2014-10-06 13:41:01 +02:00
Erik van der Zalm ce85515428 Merge pull request #1082 from Fourmi/Marlin_v1 
Add thermistor table
 2014-10-06 13:39:36 +02:00
Erik van der Zalm 764921bdbf Merge pull request #1091 from Aldert/patch-1 
Update motion_control.cpp
 2014-10-06 13:37:19 +02:00
Erik van der Zalm c40c7b589b Merge pull request #1095 from thinkyhead/codeclean 
Simple code cleanup. Rename "homeing" to homing.
 2014-10-06 13:36:48 +02:00
Erik van der Zalm 0f2e0525df Merge pull request #1096 from thinkyhead/set-home 
Proposed feature: Set Home Offsets
 2014-10-06 13:36:11 +02:00
Erik van der Zalm 5ae02a361b Merge pull request #1097 from thinkyhead/round-up-xyz 
Adjust the Z display to hide float rounding errors
 2014-10-06 13:35:00 +02:00
Matthew Schick fb34265d75 Make hotend optional when compiling with lcd support 
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
 2014-10-06 00:19:07 -04:00
Scott Lahteine 6e343ef2f0 Adjust the Z display to hide float rounding errors 2014-10-05 18:34:54 -07:00
Scott Lahteine 2f6c57eadc Proposed feature: Set Home Offsets 
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
 2014-10-05 13:35:45 -07:00
Scott Lahteine f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Neil Darlow 6c5a460e65 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-05 12:54:54 +01:00
Aldert d1e4237e1d Update motion_control.cpp 
G03 Full circle did not work (G02 is working correct)
 2014-10-04 09:24:09 +02:00
Fourmi a664763e6f Update thermistortables.h 
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"

Thx
 2014-09-27 09:05:10 +02:00
Fourmi b5dc228a7a Update configuration.h 
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
 2014-09-27 09:02:58 +02:00
Fourmi 3cbb2f56c6 Update configuration.h 
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?

Thx
 2014-09-26 22:01:06 +02:00
Fourmi c35736a140 Update thermistortables.h 
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
 2014-09-26 21:49:07 +02:00
galexander1 cb4a6dd2dc Merge pull request #1065 from oliasmage/Marlin_v1 
Corrected retract() call for use of auto probe without sled enabled.
 2014-09-19 15:12:09 -04:00
Bracken Dawson 01e9b536cb Fix build for non-sled bed auto levelling 
This function should only be used with sled, not all bed auto
levelling.
 2014-09-19 19:42:32 +01:00
Wing Tang Wong 58eabd21fb Added ifndef 2014-09-16 14:31:58 -07:00
Wing Tang Wong 88d12a762a Added #ifndef DELTA wrapper to float delta 2014-09-16 14:29:44 -07:00
alexborro bf0ecedf60 Merge pull request #1051 from fsantini/EZ_fix935 
Fix issue 935: error in matrix calculation
 2014-09-14 21:49:15 -03:00
Javi 40ba644bb4 Added profile for RAMPS with 2 extruders and 1 fan. 
modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h
 2014-09-06 02:53:36 +02:00
Charles Bell 3b8216bdd1 Corrected #endif and ifdef for Z_PROBE_SLED code. 2014-09-04 16:40:22 -04:00
Charles Bell 37799f70ba Corrected retract() call for use of auto probe without sled enabled. 2014-09-04 14:36:39 -04:00