Scott Lahteine
f0dbe61692
Tweaks to motion.h reachable tests
2018-08-21 23:34:29 -05:00
Scott Lahteine
2d3317a35b
Prettify Dual X Carriage description
2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines`
...
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.
This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
2018-08-21 19:12:26 -05:00
Scott Lahteine
97f6396b25
Fix RE_ARM LCD pins to avoid #undef
2018-08-21 12:47:40 -05:00
Scott Lahteine
0e25f66c09
Fix Ultimaker servo pin
...
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
2018-08-21 11:39:53 -05:00
Scott Lahteine
ad12b9b46b
Fix indentation, whitespace, spelling, formbot pins...
2018-08-21 09:47:57 -05:00
Scott Alfter
b5537dde7f
need to add E2END to pins_RAMPS_FD_V2.h ( #11564 )
2018-08-21 02:16:31 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations ( #11596 )
2018-08-21 02:06:18 -05:00
jmz52
a77f8c6dd5
Implement servo support for STM32F1 ( #11580 )
...
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633
Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled ( #11583 )
...
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
2018-08-20 20:37:56 -05:00
Roxy-3D
b0a8ce59bd
Update Boards.h to include Formbot support
2018-08-20 16:46:27 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board
2018-08-20 16:44:54 -05:00
Roxy-3D
a82be36d5d
Create pins_FORMBOT.h
2018-08-20 16:43:42 -05:00
ghent360
00d24a8219
Don't call __delay_4cycles for 0 cycle delay - takes a really long time. ( #11586 )
2018-08-18 22:50:11 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend ( #11575 )
2018-08-18 01:33:13 -05:00
jmz52
0b2d686160
Fix "SD init fail" problem for STM32F1 ( #11579 )
...
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
2018-08-17 23:27:10 -05:00
Kevin
db30650731
Fix UBL/Homing ( #11566 )
2018-08-16 08:28:40 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up ( #11563 )
...
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now. But if not... It is much closer to being correct.
2018-08-15 21:22:28 -05:00
InsanityAutomation
9de730b2bf
Update tool_change.cpp ( #11559 )
2018-08-15 19:30:52 -05:00
InsanityAutomation
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
2018-08-15 13:26:11 -05:00
Roxy-3D
e9de321ac0
declare void Max7219_register_setup();
2018-08-15 10:36:51 -05:00
Scott Lahteine
952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes
...
[2.0.x] Fix TMC2208 SW serial communication
2018-08-14 19:07:08 -05:00
petrzjunior
67613bf5bd
Update Czech translations ( #11510 )
2018-08-14 18:45:16 -05:00
Scott Lahteine
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
1561e61df7
New TMC2208 constructor
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6
[2.0.x] PersistentStore update followup ( #11549 )
2018-08-14 17:54:12 -05:00
Scott Lahteine
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
Scott Lahteine
834ea7fcea
Remove 'const' from PersistentStore::capacity
2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
Andy Shaw
5be2559eda
Use flash memory to emulate EEPROM ( #11500 )
...
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
2018-08-14 01:19:34 -05:00
Scott Lahteine
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
Scott Lahteine
865ee5985f
Followup persistent store with heading, const
2018-08-13 23:55:33 -05:00
Scott Lahteine
a4b0148365
Easier to find 'static inline'
2018-08-13 23:55:33 -05:00
Scott Lahteine
cc0a60453f
Merge pull request #11526 from hasenbanck/eeprom-cleanup
...
[2.0.x] Change direct eeprom access to HAL::PersistentStore
2018-08-13 19:45:10 -05:00
Roxy-3D
65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern
2018-08-13 17:46:48 -05:00
Nils Hasenbanck
577aeb4aa9
All EEPROM access uses persistentStore
2018-08-13 17:43:35 -05:00
Scott Lahteine
6a8b906318
Followup for persistent_store_api.h
2018-08-13 17:43:35 -05:00
Chris Pepper
66d2b48b59
Update PersistentStore api ( #11538 )
...
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
Roxy-3D
60f1376798
Make M7219 I more robust and nice to look at
...
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
2018-08-13 16:59:25 -05:00
Roxy-3D
fd15b1495a
add I parameter to M42 to allow access to sensitive pins
2018-08-13 16:57:09 -05:00
Scott Lahteine
11b411a872
Improve AXIS_DRIVER_TYPE macros
2018-08-13 16:57:09 -05:00
Scott Lahteine
f1347f783d
Optimize thermistor table 71
...
agData in Table 71 is extremely oversampled (see Issue #11220 ). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-08-13 02:54:55 -05:00
Scott Lahteine
0bda22367b
Allow Einsy RAMBo FAN1_PIN override
2018-08-13 02:49:30 -05:00
Scott Lahteine
1b921b246b
Fix pca9632_set_led_color
...
…when used with an I2C screen.
Co-Authored-By: soimy <soimy@163.com>
2018-08-13 02:40:22 -05:00
Scott Lahteine
aa9d329560
Reduce max accel in Creality configs
2018-08-11 22:56:51 -05:00
Scott Lahteine
c93538e9f3
UBL/planner patch tweaks
2018-08-11 22:50:45 -05:00
Scott Lahteine
0af22549a6
Allow G33 to compile with no LCD
2018-08-11 22:32:09 -05:00
Thomas Moore
fc55f1da01
Account for UBL correction when setting the planner position ( #11486 )
2018-08-10 13:00:50 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC ( #11508 )
2018-08-10 00:30:28 -05:00
Scott Lahteine
72b086b90d
Add A5984 to example configurations
2018-08-09 23:04:27 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Scott Lahteine
f891416e70
No raise on G28 after power-loss
2018-08-07 13:51:36 -05:00
Scott Lahteine
e4ecade8d4
Fix AUTO_POWER_CONTROL compile error
...
Counterpart to #11467
Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
2018-08-06 23:20:51 -05:00
Giuliano
eee1b7c50c
[2.0.x] Fix compile error ( #11465 )
...
Address #11463
2018-08-06 23:14:53 -05:00
Giuliano
e85feb2545
[2.0.x] Better timing handling ( #11461 )
2018-08-06 23:13:36 -05:00
Scott Lahteine
79835590e3
Easier to disable homing validation ( #11458 )
2018-08-06 23:11:37 -05:00
Scott Lahteine
131d216afa
Fix drivers.h dependency, defer macro evaluation ( #11450 )
2018-08-03 21:49:04 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
2018-08-03 20:47:29 -05:00
Scott Lahteine
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board ( #11446 )
2018-08-03 18:14:26 -05:00
Marcio Teixeira
f2224755ad
Fix jumping progress bar. ( #11439 )
...
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:17:02 -05:00
Scott Lahteine
aae02827c0
Cosmetic pins changes
2018-08-03 17:03:19 -05:00
Scott Lahteine
64c493ad82
MKS_12864_OLED code cleanup
2018-07-30 23:22:40 -05:00
Scott Lahteine
b826bf4194
Fix initial safe_speed in jerk code ( #11417 )
2018-07-30 22:50:08 -05:00
forkoz
2cc950d67e
[2.0.x] MKS SBASE Trinamic examples/support ( #11402 )
2018-07-30 22:48:58 -05:00
Roxy-3D
16432376ab
Revert "[2.0.x]Idex and bl touch fixes" ( #11407 )
...
* Revert "[2.0.x] bltouch home refinements (#11397 )"
This reverts commit 74900f7a70
.
* Revert "[2.0.x]Idex and bl touch fixes (#11395 )"
This reverts commit 6dafb90c01
.
2018-07-28 23:14:46 -05:00
Giuliano
74900f7a70
[2.0.x] bltouch home refinements ( #11397 )
...
Just create a better functions call logic flow
2018-07-28 19:30:14 -05:00
silentninja1
6dafb90c01
[2.0.x]Idex and bl touch fixes ( #11395 )
...
* Fix BLTouch homing
Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0
* Update tool_change.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Change brackets to be more in align of Marlin coding standards
2018-07-28 10:33:31 -05:00
Giuliano
5ce5ff8e9b
[2.0.x] fix bltouch homing ( #11379 )
...
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:30:08 -05:00
Scott Lahteine
15d68cb496
Pre-override of ST7920 delays before HAL.h
2018-07-26 23:33:18 -05:00
Dave Johnson
8a24ff94d1
AT90USB1286 PIO cleanup and optimization ( #11230 )
...
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
2018-07-26 05:58:28 -05:00
Lee Olivares
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
2018-07-26 05:52:22 -05:00
Scott Lahteine
244b9a8257
Better fastio 1280/2560 pin list
...
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
2018-07-26 05:23:51 -05:00
Scott Lahteine
955a7f0ae9
Improve driver.h macros ( #11371 )
2018-07-26 05:11:22 -05:00
MikeLud
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
2018-07-26 05:09:49 -05:00
Giuliano
4237c3d9f8
[2.0.x] different bltouch init ( #11135 )
2018-07-26 05:04:09 -05:00
Andy Shaw
624986d423
Ensure ADC conversion is complete before reading ( #11336 )
...
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.
See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
Scott Lahteine
e2aa635e70
Fix Anet A6 thermistors
...
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
2018-07-26 02:02:27 -05:00
Bo Herrmannsen
67b205fd45
Add support for board RuRAMPS4D v1.3 ( #11363 )
2018-07-25 19:32:27 -05:00
forkoz
d1c6687ecd
Update MKS sBase pins ( #11357 )
2018-07-25 19:19:09 -05:00
Scott Lahteine
048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments
...
[2.0.x] Tweak some SoftPWM code
2018-07-25 19:02:28 -05:00
Scott Lahteine
e05e95cf97
Clean trailing whitespace
2018-07-25 18:49:47 -05:00
Scott Lahteine
22ebbc091f
Tweak some SoftPWM code
2018-07-25 18:09:31 -05:00
Scott Lahteine
32de09f5c5
Specify some extra CR-10S pins
2018-07-25 18:08:09 -05:00
J.C. Nelson
9c2bfa2ab3
Remove extra parameter to enqueue. ( #11364 )
2018-07-25 18:02:02 -05:00
Giuliano
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
e5c0b490c8
Add *_DRIVER_TYPE to example configs
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-07-25 02:47:30 -05:00
Eyal
fbdbe53290
Fix get_period_inverse(0) so it doesn't crash ( #11334 )
2018-07-25 01:58:40 -05:00
Scott Lahteine
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
Scott Lahteine
4685c7d59f
Followup to M91x I patch
2018-07-24 18:30:28 -05:00
Roxy-3D
62fa028155
Handle dual gantry machines better
2018-07-24 15:34:53 -05:00
Roxy-3D
09485f63e9
add missing ')'
2018-07-22 10:50:41 -05:00
Roxy-3D
a35abce1ac
Fix missing ')'
2018-07-19 19:20:40 -05:00
Scott Lahteine
76d4cfb064
Tweak some Max7219 code
2018-07-19 18:49:39 -05:00
Scott Lahteine
4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z
...
[2.0.x] Manual Z Start Height
2018-07-19 18:26:26 -05:00
Roxy-3D
03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units
2018-07-19 17:02:46 -05:00
Roxy-3D
db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's
2018-07-19 17:01:31 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
2018-07-19 13:56:47 -05:00