Jason Smith
90d364fc37
Revert at90usb1286 conditional ( #19733 )
2020-10-14 13:48:46 -05:00
Keith Bennett
64711e0d56
If needed, home before G34 ( #19713 )
2020-10-13 18:13:25 -05:00
Earle F. Philhower, III
193c0a52d9
Add loose soft endstop state, apply to UBL fine-tune ( #19681 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-12 16:48:04 -05:00
Jason Smith
f5139f8bf4
Add D100 Watchdog Test ( #19697 )
2020-10-12 16:39:31 -05:00
InsanityAutomation
e7838c5f79
G34 Mechanical Gantry Calibration (like Prusa M915) ( #18972 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 21:34:27 -05:00
qwewer0
f21b91f1a7
Add REPORT_TRAMMING_MM option ( #19682 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 21:30:18 -05:00
Victor Oliveira
18dd0d00a6
Implement wait_for_user for Color UI ( #19694 )
2020-10-11 19:26:16 -05:00
Jason Smith
c762b7c91b
Fix various errors, warnings in example config builds ( #19686 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 19:06:57 -05:00
Jason Smith
45731bd022
Fix at90usb1286 build ( #19687 )
...
* Skip check for USBCON during dependency detection
* Ignore incompatible Teensy_ADC library, which requires Teensy >= 3
* Add IS_AT90USB
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 18:13:01 -05:00
Scott Lahteine
492ba2a111
Digipots refactor / cleanup ( #19690 )
2020-10-11 14:58:35 -05:00
Scott Lahteine
0988af453c
Optional M42/M226; Add more features filters ( #19664 )
2020-10-09 16:42:23 -05:00
Victor Oliveira
631457ffea
Support for Debug Codes - Dnnn ( #19225 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-09 06:28:53 -05:00
Scott Lahteine
7e0524109e
Add HAS_FAST_MOVES
2020-10-04 17:31:10 -05:00
Scott Lahteine
4e8eea8e78
Adjust HAL platform defines, comments
2020-10-02 17:05:59 -05:00
swissnorp
d02d7a95d1
G35 workaround for Pronterface "feature" ( #19577 )
2020-10-01 18:17:11 -05:00
Scott Lahteine
9142f5446a
Improve Power-Loss Recovery ( #19540 )
2020-09-28 15:52:21 -05:00
qwewer0
4424645e04
Multi-line comments cleanup ( #19535 )
2020-09-28 14:53:50 -05:00
Scott Lahteine
c2c6a679ea
Rename LCD conditionals ( #19533 )
2020-09-28 01:13:27 -05:00
Scott Lahteine
d2741c8680
Allow M524 between M23 and M24
2020-09-27 16:55:57 -05:00
Scott Lahteine
4975e93350
Tweak MMU beeps, misc. cleanup
2020-09-27 02:03:00 -05:00
Victor Oliveira
61d96ce1c9
Escape the M33 string arg ( #19515 )
2020-09-25 19:45:01 -05:00
Scott Lahteine
4b928b2da8
HAL and serial cleanup
...
Co-Authored-By: Jason Smith <20053467+sjasonsmith@users.noreply.github.com>
2020-09-23 19:45:33 -05:00
Scott Lahteine
5f5f76956f
Fix up tests, warnings
2020-09-22 19:59:02 -05:00
Scott Lahteine
76d8d1742c
Add multi-extruder condition
2020-09-20 20:51:21 -05:00
Scott Lahteine
8e0fac897b
Whitespace cleanup
2020-09-20 18:25:42 -05:00
Cole Markham
4628f0e237
Fix CoreXY compile with backlash cal. ( #19422 )
2020-09-19 08:14:34 -05:00
Keith Bennett
55ba5044ef
Fix missing include ( #19418 )
...
Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
2020-09-18 04:45:56 -05:00
Scott Lahteine
0473f7ee58
M115 strings
2020-09-14 02:42:05 -05:00
Scott Lahteine
cd85fa3abe
Better choice of code
...
Followup to #19344
2020-09-14 02:22:44 -05:00
Scott Lahteine
49ca16c3fb
heater_ind_t => heater_id_t
2020-09-13 18:22:28 -05:00
Neskik
1917ed8741
M872 wait for probe temperature ( #19344 )
2020-09-11 22:51:19 -05:00
Scott Lahteine
6759aff220
Clean up W25QXXFlash class
2020-09-10 21:54:04 -05:00
Giuliano Zaro
b2ba9009d0
Fix "too cold" in M600 ( #19332 )
2020-09-10 16:47:58 -05:00
Scott Lahteine
9b78138600
General cleanup
2020-09-10 02:29:01 -05:00
Giuliano Zaro
828a582f4d
Make M600 heat up the nozzle. Reset runout on fail. ( #19298 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-09-07 21:29:45 -05:00
Kadah
bb017038d4
Fix M166 Gradient Mix for DELTA ( #19285 )
2020-09-07 03:15:42 -05:00
Scott Lahteine
a445746a8b
Clean up LCD conditionals, DWIN
2020-09-06 23:21:42 -05:00
Scott Lahteine
14314b68ec
No 'ls' if media isn't mounted
2020-09-04 19:57:47 -05:00
Victor Sokolov
e97e6865c3
MarkForged kinematics ( #19235 )
2020-09-03 20:12:53 -05:00
swissnorp
a12ac5e175
Mark axes not-homed with HOME_AFTER_DEACTIVATE ( #18907 )
2020-08-27 16:05:53 -05:00
Scott Lahteine
462d3eeab1
set_axis_not_trusted => set_axis_never_homed
2020-08-27 14:49:00 -05:00
Zachary Annand
97ec6c1be6
Independent Neopixel option ( #19115 )
2020-08-27 14:18:16 -05:00
Scott Lahteine
4955aa5b78
Prusa => Průša
2020-08-26 02:15:50 -05:00
ellensp
66694a213f
LEDs followup ( #19133 )
2020-08-25 08:16:43 -05:00
Scott Lahteine
c488070859
Minor cleanup w/r/t LEDs
2020-08-23 23:57:51 -05:00
Scott Lahteine
638f6f0f06
Neopixel => NeoPixel
2020-08-23 03:14:11 -05:00
Scott Lahteine
6036a0df6b
Fix DUET_SMART_EFFECTOR
2020-08-23 02:07:52 -05:00
Giuliano Zaro
6b549e1971
Optional homing in LCD Repeatability Test ( #19104 )
2020-08-21 21:20:30 -05:00
BigTreeTech
e2ee05c976
Broadcast SD Print Completion ( #19102 )
2020-08-21 17:06:51 -05:00
Scott Lahteine
b11c3ddbed
M80 followup
2020-08-14 00:33:10 -05:00
Scott Lahteine
aaba9b7880
Clean up M80/M81, DWIN
2020-08-14 00:16:22 -05:00
Scott Lahteine
81f5973afc
Followup for SPI Flash
2020-08-09 15:58:12 -05:00
Scott Lahteine
f7b261a363
Shorthand values for M575 B
2020-08-09 15:55:31 -05:00
Scott Lahteine
8318d90e85
Password followup
2020-08-08 20:13:15 -05:00
sherwin-dc
852e5ae042
Password via G-code and MarlinUI ( #18399 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 20:00:42 -05:00
Victor Oliveira
0a1b865987
W25QXX SPI Flash support ( #18897 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 19:24:31 -05:00
Scott Lahteine
97cb0a8c3e
General cleanup
2020-08-08 00:17:09 -05:00
Scott Lahteine
18adfe87bc
configuration_store => settings
2020-08-07 20:52:23 -05:00
Scott Lahteine
b3ca43fe78
Use uintptr_t for pointer-to-int
2020-08-07 19:31:05 -05:00
Scott Lahteine
99ba866d8d
Optimize G-code / feature dependencies ( #18919 )
2020-08-06 08:14:00 -05:00
Scott Lahteine
d69c2a90b7
Simple rename of hex_print
2020-08-06 04:07:59 -05:00
Scott Lahteine
a9912681b4
General cleanup
2020-08-06 00:52:36 -05:00
Alexander Gavrilenko
117df87d19
Support for TFT & Touch Screens ( #18130 )
2020-07-30 01:43:19 -05:00
Scott Lahteine
73ce80af3a
In G28 Z is sort-of known
2020-07-29 20:59:21 -05:00
Scott Lahteine
95f990a656
Fix UNKNOWN_Z_NO_RAISE in G28
...
Bug introduced in 73fc0778b8
2020-07-29 20:43:48 -05:00
Diego von Deschwanden
de5cca6b1f
Update more external links ( #18819 )
2020-07-28 01:04:44 -05:00
Scott Lahteine
11702dc059
Update (c)
2020-07-25 04:10:21 -05:00
InsanityAutomation
c5ec80d6c7
G425/G35 menu items; G425 pre- and post- scripts ( #18737 )
2020-07-24 23:31:15 -05:00
Scott Lahteine
451f48231d
Ender 3 V2 BL24C16 EEPROM support ( #18758 )
2020-07-24 03:09:14 -05:00
Scott Lahteine
d1e20eb29f
Update links, README, contributing, etc.
2020-07-23 20:46:51 -05:00
Diego von Deschwanden
42fbd527f3
Fix links to secure sites ( #18745 )
2020-07-22 22:20:14 -05:00
InsanityAutomation
b4b19aef7f
Custom Nozzle Wipe ( #18736 )
2020-07-22 01:42:44 -05:00
Scott Lahteine
6027055695
Optimize LCD, Wifi, etc. libraries ( #18730 )
2020-07-21 04:00:39 -05:00
Scott Lahteine
e78f1237ea
Matching mat.bed_temp condition
2020-07-20 21:51:25 -05:00
Markus Towara
f4aba99624
Use safe_delay for PSU_POWERUP_DELAY ( #18680 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-17 12:33:45 -05:00
JBA
4abad60bf1
ExtUI for Anycubic I3 Mega ( #18655 )
2020-07-17 01:07:09 -05:00
Jason Smith
76b67d55e2
Fix some Power Loss Recovery behaviors ( #18558 )
2020-07-15 01:14:03 -05:00
Scott Lahteine
b40440cf38
Tool-change debug option
2020-07-14 21:15:14 -05:00
Leo
c9718504c5
Fix leveling "Point n of 3" message ( #18639 )
2020-07-14 17:02:38 -05:00
Keith Bennett
56c3deb423
Fix G35 output formatting ( #18631 )
2020-07-12 13:43:52 -05:00
ManuelMcLure
d884d1eda8
"M122 I" to reinitialize TMC ( #18571 )
2020-07-09 17:48:06 -05:00
Giuliano Zaro
b0c6cfb051
MarlinUI support for up to 5 Material Presets ( #18488 )
...
- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-09 03:11:57 -05:00
Scott Lahteine
73fc0778b8
Consolidate probe clearance, add section debug ( #18576 )
...
* Better section / function log
* Add do_z_clearance motion function
2020-07-08 21:44:21 -05:00
Scott Lahteine
915847b75a
Add Cap:RUNOUT
...
Co-Authored-By: Julius ter Pelkwijk <mrseeker@users.noreply.github.com>
2020-07-08 06:53:03 -05:00
Scott Lahteine
d6682c8609
Whitespace cleanup
2020-07-07 02:30:26 -05:00
ellensp
12e7106a8a
Update and fix POWER_MONITOR ( #18561 )
2020-07-06 18:53:26 -05:00
Luc Hoang Long
764fc81761
Use Material Preset 1 for PID autotune ( #18446 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-06 01:17:40 -05:00
Scott Lahteine
a6b8b12a6a
Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE
2020-07-05 18:01:28 -05:00
Robby Candra
c02451b602
Filament Runout Inverting => State ( #18537 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-05 17:42:19 -05:00
Scott Lahteine
dc6d8357a6
Reduce string duplication
2020-07-05 16:00:32 -05:00
Scott Lahteine
0fad9535d1
Add comment to M412
2020-07-05 15:58:12 -05:00
Oliver Jean Eifler
67db7c0294
Probing points followup ( #18552 )
2020-07-05 15:32:04 -05:00
Scott Lahteine
ea520e670a
Fix "Probing mesh point" message
...
Closes #17770
Co-Authored-By: Jan-Gerard van der Toorn <jan-gerard@users.noreply.github.com>
2020-07-05 01:03:49 -05:00
notabucketofspam
6eb19cef11
Fix "'ubl' not declared" error ( #18541 )
2020-07-04 19:18:11 -05:00
ellensp
91dc74ff16
M150 I to set Neopixel by index ( #18490 )
2020-07-03 16:33:09 -05:00
Scott Lahteine
f6a2b64091
Clean up LCD Manual Move / UBL Mesh Edit ( #18373 )
2020-07-03 09:53:22 -05:00
Scott Lahteine
c43bbcce15
Enforce sensor range for temperature target ( #18465 )
...
* Mitigate stepper timeout
* Add CHAMBER PWM code
* Structured thermistor tables
* Fix reversed sensor ranges
* Prevent temps outside sensor range
2020-07-01 16:27:28 -05:00
Scott Lahteine
70fa4c9323
Per-Hotend Default PIDs ( #18483 )
2020-07-01 16:18:20 -05:00
Scott Lahteine
48151d1778
ClosedLoop as singleton
2020-06-28 14:35:23 -05:00
Fabio Santos
29753baeee
Adjustable delta_diagonal_rod_trim ( #18423 )
2020-06-27 23:53:44 -05:00
InsanityAutomation
c1dcc56a0b
Tool Change Migration fixes and debugging ( #18448 )
2020-06-27 21:57:01 -05:00
Scott Lahteine
d0f2fde920
Fix material preset type
2020-06-24 19:47:32 -05:00
Scott Lahteine
4275466f49
Fix issues with no hotend / bed / fan ( #18395 )
2020-06-24 19:44:50 -05:00
Pascal de Bruijn
c135db1ce7
Display PID Autotune status ( #18408 )
2020-06-24 15:04:39 -05:00
Scott Lahteine
1fb2fffdbf
General cleanup
2020-06-23 19:59:38 -05:00
Fabio Santos
25c7c43a82
Add SERIAL_FLOAT_PRECISION option ( #18367 )
2020-06-22 21:12:45 -05:00
Scott Lahteine
2b286a101a
Quickie G35 patch
2020-06-21 22:54:26 -05:00
Scott Lahteine
9944403cbf
Add Cap:ARCS
2020-06-21 19:15:32 -05:00
Rui Caridade
ac50a355a3
G35: Bed tramming assistant ( #16897 )
2020-06-21 04:27:51 -05:00
Scott Lahteine
424569b4c4
Power monitor and display ( #17437 )
2020-06-18 15:23:03 -05:00
InsanityAutomation
23806aeb3c
Fix non-PWM spindle/laser compile ( #18311 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Luu Lac <45380455+shitcreek@users.noreply.github.com>
2020-06-16 15:49:32 -05:00
Scott Lahteine
f4c258dc23
Creality Ender 3 v2 ( #17719 )
2020-06-16 01:45:27 -05:00
Scott Lahteine
aea60d9450
Clean up trailing spaces
2020-06-15 18:11:32 -05:00
rudihorn
3bf990ec34
PTC: Extend options, fix probing bugs ( #18253 )
2020-06-10 18:25:17 -05:00
Scott Lahteine
ca5a8ea827
Add G-code "backspace" support
2020-06-08 20:17:44 -05:00
MoellerDi
bac760207c
Add volumetric extrusion limit ( #17017 )
2020-06-08 03:24:46 -05:00
Luu Lac
eda2fd8dbe
Improvements for Laser / Spindle ( #17661 )
2020-06-08 00:47:31 -05:00
Scott Lahteine
cfd31ff70e
Add HAS_FILAMENT_RUNOUT_DISTANCE
2020-06-07 21:55:09 -05:00
Scott Lahteine
45488a431a
Clean up whitespace
2020-06-07 21:52:06 -05:00
mikekscholz
859b047a23
Revert M290 report style ( #18202 )
2020-06-07 18:44:35 -05:00
Scott Lahteine
6371782263
Add HAS_MULTI_SERIAL conditional
2020-06-05 16:20:27 -05:00
MoellerDi
fcb8c5a1c1
Fix G34 move in wrong direction ( #18188 )
2020-06-04 19:09:01 -05:00
Scott Lahteine
2d1cbf8e1d
Add comment to M281
2020-06-04 03:14:41 -05:00
Scott Lahteine
5f9624f70b
Ensure XY known for Z safe homing
...
Addressing #18143
2020-06-02 19:13:01 -05:00
Scott Lahteine
a1f3d2f3cd
Move set_all_z_lock to Stepper
2020-06-02 02:37:33 -05:00
Mark Scammacca
7119596170
G-code line number for each serial port (for TFTs) ( #18165 )
2020-06-01 22:19:10 -05:00
Scott Lahteine
bda380513a
Add valid() to recovery.info
2020-06-01 17:02:58 -05:00
Eyal
815c8d2b55
Improve G2 / G3 motion accuracy ( #18144 )
2020-05-31 00:26:15 -05:00
Scott Lahteine
7628895ac8
Apply misc TERN
2020-05-30 22:34:30 -05:00
Scott Lahteine
0578bbbf5d
Marlin: Use strcmp_P
2020-05-24 20:09:30 -05:00
Scott Lahteine
6e01079b48
G29 patch followup
2020-05-17 20:57:16 -05:00
Scott Lahteine
fac3a7d147
Fix ABL G29 early BLTouch deploy
2020-05-17 19:40:45 -05:00
Scott Lahteine
d9077e51e8
Make M421 more versatile
2020-05-17 15:12:08 -05:00
Scott Lahteine
c73894308c
Tweak M114 D output
2020-05-17 15:12:08 -05:00
Scott Lahteine
b8fe3bbd6d
Fix position sync on M420 S0
2020-05-17 15:12:08 -05:00
thisiskeithb
5a92462c0f
Less ambiguous option comment ( #17983 )
2020-05-13 14:26:27 -05:00
Scott Lahteine
d853a70556
Remove strcpy compile warning
2020-05-12 02:11:32 -05:00
Scott Lahteine
aecfc05748
Align slightly in M114 detail
2020-05-11 19:24:58 -05:00
Colin Godsey
8a22ef0c83
G6 Direct Stepping ( #17853 )
2020-05-11 19:22:41 -05:00
chestwood96
1475fd312a
M600 R<resume temperature> ( #17919 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-05-11 02:06:31 -05:00
Scott Lahteine
32dc874928
Tempted by the const of a seg_length
2020-05-10 03:42:58 -05:00
Scott Lahteine
de6a725b04
Fix G2/G3 segment size
...
Fixes #17348
2020-05-10 02:46:48 -05:00
Gurmeet Athwal
91fe0e1022
Fix line ending in M360 ( #17917 )
2020-05-09 23:36:04 -05:00
Alexander Gee
7a9bb6bc86
Remove old M73 / SD comment ( #17928 )
2020-05-09 23:35:26 -05:00
Jason Smith
2af270ca42
Fix M115_GEOMETRY_REPORT extra commas ( #17933 )
2020-05-09 23:24:15 -05:00
Gurmeet Athwal
a4c981469e
Extended reporting options ( #16741 )
2020-05-05 23:34:04 -05:00
Scott Lahteine
97e47b4494
Wrap some macros
2020-05-04 23:08:15 -05:00
Gurmeet Athwal
9381a76d75
Add Cap:LONG_FILENAME ( #17821 )
2020-05-02 16:19:40 -05:00
Scott Lahteine
9b7807d40f
Clean up M122 code
2020-05-02 15:39:38 -05:00
Scott Lahteine
2d758663db
G12 E soft endstops parameter ( #17788 )
2020-04-29 03:25:35 -05:00
Scott Lahteine
bd82b8bc7e
Suppress compile warnings
2020-04-28 08:34:07 -05:00
studiodyne
89b17b5463
Followup fixes for singlenozzle, etc. ( #17712 )
2020-04-28 00:21:23 -05:00
Marcio T
919e53a5d4
Fix: SD pause broken with PARK_HEAD_ON_PAUSE ( #17754 )
2020-04-27 22:43:42 -05:00
Scott Lahteine
01c646a892
Apply more HAS_HOTEND
2020-04-27 22:39:31 -05:00
Martin
0777e391be
Add M115 Cap:BABYSTEPPING ( #17691 )
2020-04-27 07:31:48 -05:00
Scott Lahteine
c536b8de62
Apply ternary macros
2020-04-27 06:30:28 -05:00
studiodyne
5ae45bab18
Adjustable XY_FREQUENCY_LIMIT ( #17583 )
2020-04-27 05:59:52 -05:00
ellensp
c7f9eb7b21
Allow M42 M with other parameters ( #17744 )
2020-04-27 05:16:47 -05:00
Scott Lahteine
33217b0dd0
Add HOTEND_OVERSHOOT
2020-04-27 05:07:08 -05:00
Scott Lahteine
8b3c7dda75
Add HAS_FAN and others
2020-04-27 05:07:08 -05:00
Gurmeet Athwal
8f86f7c601
Add Cap:SDCARD to M115 ( #17208 )
2020-04-26 20:55:14 -05:00
thisiskeithb
02a054cda4
HOME_BEFORE_FILAMENT_CHANGE on any axis unknown ( #17681 )
2020-04-25 20:56:54 -05:00
Scott Lahteine
ab2b98e425
Apply composite tests
2020-04-23 21:53:52 -05:00
Scott Lahteine
55d66fb897
Add HAS_JUNCTION_DEVIATION
2020-04-23 21:53:51 -05:00
studiodyne
2f6262c27b
Automatic Tool Migration feature ( #17248 )
2020-04-22 21:03:28 -05:00
Scott Lahteine
19873f04d4
Fix M100 compile warning
2020-04-22 18:53:40 -05:00
Scott Lahteine
6d90d1e1f5
Apply TERN to compact code ( #17619 )
2020-04-22 16:35:03 -05:00
Scott Lahteine
2ae00db43e
Move G26 heading up
2020-04-21 15:27:53 -05:00
Ondřej Nový
abd42e5dea
Fix M125 unretract length ( #17623 )
2020-04-20 11:32:21 -05:00
Scott Lahteine
000ec9fc13
Ensure language.h include order
...
See #17604
2020-04-20 09:43:48 -05:00
Scott Lahteine
15f6f53638
Add HAS_HOTEND, etc.
2020-04-20 00:12:22 -05:00
Scott Lahteine
5d0deba938
Longer default power-up delay
...
See MarlinFirmware/Configurations#78
2020-04-20 00:12:22 -05:00
Scott Lahteine
87875e0de8
Fix mixing with "unload all" compile
2020-04-19 02:10:02 -05:00
grauerfuchs
4a5a3d27ed
Option to use raw digipot values ( #17536 )
2020-04-18 22:56:23 -05:00
Scott Lahteine
3a42b6c5c6
Patch M425 for CAN_CALIBRATE
...
Fixes #17430
2020-04-17 10:24:27 -05:00
randellhodges
808f632997
Update print job timer with Chamber temp ( #17552 )
2020-04-15 23:12:09 -05:00
Scott Lahteine
22da1b2b31
Rename some "kill" messages
2020-04-13 14:54:50 -05:00
Scott Lahteine
e3321920f3
Update Marlin website links to https
2020-04-12 17:21:14 -05:00
Scott Lahteine
ac7b484703
Safe homing: Raise Z on G28 Z ( #17501 )
...
Co-Authored-By: RFBomb <robbery525@gmail.com>
2020-04-12 14:58:58 -05:00
Scott Lahteine
2493cf0364
Fix M1001 with HAS_LEDS_OFF_FLAG
2020-04-12 01:22:10 -05:00
Scott Lahteine
7aed32df00
Fix SD_FINISHED_RELEASECOMMAND bug
...
Fixes #17401 bug that was introduced in 8f26c3a
2020-04-11 22:08:37 -05:00
Scott Lahteine
e4903396d4
Fix up pausing / parking display ( #17460 )
2020-04-11 20:36:17 -05:00
Scott Lahteine
48919c54fb
Add SRAM command injection ( #17459 )
2020-04-09 20:05:58 -05:00
Tor-p
d6f39a69af
Fix G76 probe height / position ( #17392 )
2020-04-06 15:32:06 -05:00
Scott Lahteine
0e06aaa2bc
Add millis helper macros
2020-04-04 02:48:30 -05:00
Ben
df8b7dfc40
Various Laser / Spindle improvements ( #15335 )
2020-04-02 19:31:08 -05:00
Scott Lahteine
2b9d2dce16
Apply GRID_LOOP
2020-04-02 14:33:04 -05:00
Marcelo Castagna
178ca2bcdf
Fix M710 report formatting ( #17356 )
2020-03-31 19:13:37 -05:00
Marcio T
d83ad6f321
Improve / fix FTDI EVE Touch UI ( #17338 )
...
- Fix timeout and debugging string
- Fix check for whether `LCD_TIMEOUT_TO_STATUS` is valid
- Fix incorrect debugging message
- Make capitalization of callbacks consistent.
- Allow Touch UI to use hardware SPI on Einsy boards
- Move print stats to About Printer page.
- More generic about screen with GPL license.
- Add missing handler for power loss event
- Less code duplication on status screen and main/advanced menu; more legible
- Reorganize advanced and main menu to add more features
- Hide home Z button when using Z_SAFE_HOMING
- Fix compilation errors when certain features enabled
- Fix missing labels in UI
- Improve color scheme
- Add new preheat menus
- Fix incorrect rendering of Marlin logo on boot
- Add Level X Axis and Auto calibrate buttons
2020-03-31 14:22:04 -05:00
Tanguy Pruvot
c759729478
STM32F1: Restore M43 build support ( #17336 )
2020-03-31 14:13:20 -05:00
Scott Lahteine
e0e87ca19a
Fix last arc segment
...
Co-Authored-By: ellensp <ellensp@hotmail.com>
2020-03-31 12:50:48 -05:00
Scott Lahteine
765a9f3471
do_pause_e_move => unscaled_e_move
2020-03-29 16:26:55 -05:00
Scott Lahteine
747b964295
Clean up user-wait, SD completion ( #17315 )
2020-03-28 03:18:53 -05:00
Scott Lahteine
53fe572bbd
Limited backlash editing with Core kinematics ( #17281 )
2020-03-27 22:00:27 -05:00
InsanityAutomation
3655e240f5
Fix SD finished ExtUI / host action ( #17285 )
2020-03-27 16:06:39 -05:00
Scott Lahteine
5ec1a8bb2b
Fix M0 unused var warning
2020-03-25 20:27:21 -05:00
Scott Lahteine
f2ed18d150
M303 followup
...
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off ( #17284 )
...
M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
Scott Lahteine
7988e31f5e
whitespace
2020-03-21 21:16:15 -05:00
InsanityAutomation
84dec5da10
Add M42 M, improve M43 ( #17173 )
2020-03-18 16:12:51 -05:00
Scott Lahteine
de45ac41ad
Implement CONTROLLER_FAN_USE_Z_ONLY
...
Followup to #17149
2020-03-18 14:36:40 -05:00
Erkan Colak
83eec683c9
New Controller Fan options and M710 gcode ( #17149 )
2020-03-18 13:41:12 -05:00
Scott Lahteine
abea6d5787
Tweak some lambdas
2020-03-18 10:33:15 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line ( #17175 )
2020-03-15 18:23:24 -05:00
Scott Lahteine
c39873759f
Fix Z after ABL Bilinear G29 with fade
...
Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>
2020-03-15 18:18:38 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae
Fix G26 corrupted position
2020-03-13 19:27:02 -05:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7
M0 Q preserve status
2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382
Fix end of short (auto0.g) prints
2020-03-13 13:59:17 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
Scott Lahteine
318a16637b
Fix M810 macro multiple use
...
Fixes #17125
2020-03-11 17:15:39 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage ( #17101 )
2020-03-10 20:13:59 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting ( #17082 )
2020-03-10 19:42:57 -05:00
Scott Lahteine
4e3a793f1e
Fix broken enqueue_P
2020-03-10 18:28:49 -05:00
Scott Lahteine
2a71e4f336
Revert that wack backoff
2020-03-07 23:10:56 -06:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
Scott Lahteine
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
Scott Lahteine
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
Scott Lahteine
6d18f715e4
Fix M0/M1 message string
2020-03-06 13:14:22 -06:00
Scott Lahteine
c083728e4c
General code cleanup
2020-03-03 14:20:37 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
Scott Lahteine
5171e9da93
No more direct G28 calls
2020-03-02 21:01:58 -06:00
Scott Lahteine
646599d0d9
Finish M900 updates
2020-03-02 17:10:51 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug ( #17052 )
2020-03-02 13:35:02 -06:00
ellensp
af23c0480e
Don't define 'valptr' if unused ( #17048 )
2020-03-02 13:17:52 -06:00
Scott Lahteine
49c5f614c6
Minor motion style changes
2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39
Improved M900
2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug ( #17013 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test ( #17005 )
2020-02-27 22:47:44 -06:00
Scott Lahteine
bfbd976c09
General G76 cleanup
2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c
Replace direct call to G28(true)
2020-02-27 07:48:34 -06:00
Scott Lahteine
77b82d300a
Add idle_no_sleep
2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2
Cleanups for PTC
2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Scott Lahteine
bafe8d920a
Handle print completed LED event in M0
2020-02-26 12:02:54 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option ( #16932 )
2020-02-26 09:23:55 -06:00
Scott Lahteine
18b875dc9f
Allow print recovery after parking
2020-02-26 08:16:46 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off ( #16872 )
2020-02-26 06:50:13 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
Scott Lahteine
5071fe82ab
Ensure proper SD print completion ( #16967 )
2020-02-25 22:18:14 -06:00
Scott Lahteine
454cbcce51
Fix the wait loop in M0 / M1
2020-02-25 12:20:54 -06:00
Scott Lahteine
9040394e8e
Fix card_eof error
2020-02-24 11:00:01 -06:00
Scott Lahteine
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
Scott Lahteine
0ba18848af
Allow USE_GCODE_SUBCODES for debugging
2020-02-22 22:50:03 -06:00
Scott Lahteine
b2328d089a
Allow LCD_PIXEL_WIDTH/HEIGHT override
2020-02-22 21:36:21 -06:00
Scott Lahteine
29ec868c4b
Commit last SD line before fileHasFinished
2020-02-22 20:46:52 -06:00
ellensp
7bf3581b02
Fix M0/M1 broken wait loop ( #16921 )
2020-02-22 18:37:39 -06:00
Scott Lahteine
1ab6f910b6
Use moves_free in ok_to_send
2020-02-22 02:30:59 -06:00
Scott Lahteine
22b974691e
Tweak process_line_done for speed
2020-02-20 20:36:51 -06:00
Scott Lahteine
19991e269b
Show end prompt with Print Event LEDs
2020-02-20 20:36:50 -06:00
Scott Lahteine
a1f026f57a
Inline manage_inactivity, tweak autoreport_paused
2020-02-20 20:36:50 -06:00
Robby Candra
1c52d76668
Serial redirect for Move Command when stopping ( #16906 )
2020-02-20 02:22:07 -06:00
Giuliano Zaro
42208bc031
Fix unknown command on empty lines ( #16867 )
2020-02-16 01:10:20 -06:00
Scott Lahteine
073e4443e8
Optimize "Dismiss" string
2020-02-14 00:05:06 -06:00
Scott Lahteine
00ba053c90
Clean up host actions code ( #16856 )
2020-02-13 23:39:27 -06:00
Robby Candra
af84e362cc
Remove unused queue.stopped_N ( #16850 )
2020-02-13 18:59:32 -06:00
Gaston Dombiak
082117c4bb
Ping the job timer in M140 ( #16849 )
2020-02-13 18:43:47 -06:00
Giuliano Zaro
0e17d10bf3
Fix G-code line parsing ( #16840 )
2020-02-13 18:30:47 -06:00
Scott Lahteine
fa4a6cdb5c
Fix out-of-order M0 after SD printing
...
Fixes #14774
Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>
2020-02-10 16:33:40 -06:00
Scott Lahteine
3bef7a4450
Add g-code quoted strings, improve stream code ( #16818 )
2020-02-10 14:52:15 -06:00
Scott Lahteine
0ce83dee95
Show print time with PRINTER_EVENT_LEDS
2020-02-09 11:37:43 -06:00
Scott Lahteine
38873596ec
Tweak parser warning
2020-02-09 11:37:43 -06:00
Scott Lahteine
130e36d766
Tweak ABL logging, document probing
2020-02-08 17:47:54 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test ( #16511 )
2020-02-05 20:33:39 -06:00
Scott Lahteine
f312ddfa4f
More updates for 8 extruders, REPEAT
2020-02-04 12:37:20 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
0e72c315a0
Minor string storage optimization
2020-02-01 20:29:31 -06:00
Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
5296af94d2
Drop obsolete SD special char handling
...
See #14035
2020-02-01 06:49:56 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
3c9464eea4
Tweak G60/G61 slots
2020-01-30 03:25:40 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
chgi
99b6a132bc
Fix G60/G61 slots > 8 and compile error ( #16715 )
2020-01-30 03:18:45 -06:00
Radek Pietruszewski
e6a675e6ec
Fix missing string for M48 build ( #16708 )
2020-01-30 03:13:31 -06:00
Neskik
1db9d9f76f
Fix probe temp calibration ( #16718 )
2020-01-30 03:00:38 -06:00
Scott Lahteine
e8ed4329ea
Cleanup of old includes, add comments
2020-01-29 22:41:18 -06:00
Scott Lahteine
8bd6b60a01
Remove extraneous G60/G61 lines
2020-01-27 15:40:25 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Robby Candra
a0a93e35ae
Fix serial port redirection (index ≠ port num) ( #16687 )
2020-01-26 22:46:26 -06:00
Jason Smith
95d5a0c480
Fix DELTA_CALIBRATION_MENU recursive call ( #16656 )
2020-01-26 00:02:06 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
Ryan
b7f86bffd5
Arc segment radius scaling ( #16551 )
2020-01-21 02:53:26 -06:00
Tanguy Pruvot
c8ac908db2
Release UI on G26 priming timeout ( #16449 )
2020-01-21 01:05:55 -06:00
Bob Kuhn
a1f5245e27
L64xx M906 Fix status variable, formatting ( #16597 )
2020-01-20 01:15:00 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
ellensp
0547d9d651
Reset shutdown timer on M85 ( #16587 )
2020-01-19 22:24:12 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
Scott Lahteine
79c2f05e7d
Fix M112 with Emergency Parser
2020-01-19 19:00:24 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
Bob-the-Kuhn
0d0dfba203
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. ( #16579 )
2020-01-17 02:44:01 -06:00
gjdodd
7481563bd9
Nikon IR support for time lapse photos ( #16539 )
2020-01-15 17:59:41 -06:00
InsanityAutomation
ffd8b595d1
Fix PLR cancel with ExtUI ( #16556 )
2020-01-13 20:52:24 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Bob Kuhn
c4ffe74d71
Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support ( #16538 )
2020-01-13 00:26:17 -06:00
Ryan V1
56e51efeea
Use RECIPROCAL macro (not _RECIP) ( #16530 )
2020-01-11 17:16:16 -06:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Jamie
36d08f8ad3
Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs ( #16510 )
2020-01-09 04:48:00 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
Jamie
022b6b9067
Fix M115 cap with EXTRUDERS == 0 ( #16459 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
randellhodges
0b6c2d893e
Fix G34 with Z_DUAL_STEPPER_DRIVERS compile ( #16274 )
2019-12-20 22:03:37 -06:00
Scott Lahteine
deff538909
Fix broken M100_dump_routine
2019-12-19 21:02:14 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine
865071a946
Tweak code formatting
2019-12-19 02:16:17 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
0400783444
Tweak G34, fix a declaration
2019-12-19 00:42:39 -06:00
danym21
6e8dcba698
Fix G28 debug line, M569 calls ( #16213 )
2019-12-15 12:00:00 -06:00
Luu Lac
e9dadacf7b
Fix bad #ifdef ( #16227 )
2019-12-15 11:16:36 -06:00
Scott Lahteine
f3d64b7115
Cardreader read/write open methods
2019-12-12 18:46:49 -06:00
Scott Lahteine
83a4e8559c
Followup to "optimize common strings"
2019-11-30 08:18:23 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
BigTreeTech
441ee3e53f
Add 'M114 E' to get E position (M114_DETAIL) ( #16026 )
2019-11-29 06:53:32 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Scott Lahteine
98f83dc756
Add comments to G29
2019-11-27 01:05:22 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02
Add M220 B/R with PRUSA_MMU2 ( #15739 )
2019-11-26 03:34:18 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
InsanityAutomation
2142beb2e5
Fix UI compile error in UBL ( #15981 )
2019-11-24 17:04:19 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a
Fix G29 for updated meshCount type ( #15960 )
2019-11-21 03:19:56 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
798f34abcd
Float XY probe offset followup (probe edge) ( #15928 )
2019-11-19 23:29:52 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
ellensp
7b29c60c46
Fix compile with chamber enabled ( #15862 )
2019-11-10 16:15:08 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
ad28da7eb4
Patch ABL G29 loop
...
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e
Followup to M240 patch
2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219
Fix blocking delay in Photo G-code M240 ( #15728 )
2019-10-31 17:14:11 -05:00
Scott Lahteine
4e6e02bc3e
Include pause.h for M701-702
2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a
Fix meshCount signed-ness
2019-10-31 13:18:50 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
ab0fe1a7dd
Tweak G29 faux point
2019-10-26 14:41:54 -05:00
Scott Lahteine
732bf89878
Get 'cancelable' for gcode.cpp
2019-10-25 19:38:23 -05:00
Scott Lahteine
014b739bac
Fix M486 int parameters
2019-10-25 19:19:33 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Jacob Jordan
9895e6d766
Only use slow homing speed where applicable ( #15640 )
2019-10-24 13:14:45 -05:00
Robby Candra
cf8541a7a7
Fix G92.9 (thus PLR Z position) ( #15625 )
2019-10-24 13:05:50 -05:00
Scott Lahteine
cd3ec5a77b
Add error-check to M422
2019-10-24 12:59:50 -05:00
milkpirate
6bcd4eb12d
Fix M420 (UBL) undefined variables ( #15621 )
2019-10-24 12:07:17 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Scott Lahteine
160c8be191
Fix BABYSTEP_DISPLAY_TOTAL output
2019-10-21 13:53:19 -05:00
Scott Lahteine
0652f19673
Fix M420 for moved probe methods
2019-10-16 15:56:34 -05:00
Scott Lahteine
bb381e22b2
Fix left-shift warning
2019-10-16 15:42:46 -05:00
Bo Herrmannsen
0d7736d663
Enable M191 ( #15531 )
2019-10-16 15:02:37 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Scott Lahteine
faacfe13c2
Tweak M105 layout
2019-10-15 13:35:13 -05:00
Antti Andreimann
d47f29bd4c
Give a dummy response to M105 with zero thermistors ( #15568 )
2019-10-15 13:30:52 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Scott Lahteine
0322348924
Handle runout in runout.cpp
2019-10-03 06:27:30 -05:00
Oliver Jean Eifler
d52b908627
Fix coordinate size for G26 w/out arcs ( #15443 )
2019-10-01 20:02:27 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
f307ff68f7
Multiply by float, not double
2019-09-29 17:25:27 -05:00
Alex Somesan
10bbed7f69
Fix comma/semicolon typo ( #15420 )
2019-09-29 16:50:53 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Scott Lahteine
7c5e6900e1
Tweak comment
2019-09-28 22:08:02 -05:00
InsanityAutomation
0ca6abce72
Add reporting to M290 ( #15376 )
2019-09-28 16:58:48 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
InsanityAutomation
5221e2d991
Restore Host Prompt Info ( #15387 )
2019-09-27 17:06:26 -05:00
