Robby Candra
c9aa68ef7a
Encoder direction: Wrangle, Revert select screen change ( #14628 )
2019-07-17 19:41:15 -05:00
Chris Pepper
9e19f004d0
Update Travis to Ubuntu "Bionic" ( #14664 )
2019-07-17 19:12:40 -05:00
Marcio Teixeira
839255eed4
Fix for M504 changing filament runout value ( #14661 )
...
Fixes #14476
2019-07-17 19:11:45 -05:00
Scott Lahteine
305f277843
Drop old includes in serial.h
2019-07-17 05:49:20 -05:00
thisiskeithb
523feeee3c
Tevo Tornado configuration ( #14576 )
2019-07-17 04:54:59 -05:00
Tanguy Pruvot
9dfa5ba3a5
XPT2046: Handle MKS touchscreen w/out PenIRQ pin ( #14640 )
2019-07-17 04:41:10 -05:00
Jason Smith
f2c5740d06
Add 'E' argument to G34 to allow stowing between probes ( #14533 )
...
- Use the return value from probe_pt during `G34`
Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
2019-07-17 04:23:19 -05:00
Robby Candra
2c5436e315
Fix HOST_PROMPT_SUPPORT include in ExtUI API ( #14650 )
2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Marcio Teixeira
57ed063ba1
Fix unused variable warnings ( #14643 )
2019-07-17 03:16:10 -05:00
Scott Lahteine
06324df072
Apply some #ifndef
2019-07-17 03:14:44 -05:00
Marcio Teixeira
27c487bab7
Print progress enhancements ( #14647 )
2019-07-17 03:14:44 -05:00
Robby Candra
ebb1a7dc1f
Fix EXT_UI example onFilamentChange Parameter ( #14649 )
2019-07-17 03:05:23 -05:00
Scott Lahteine
5ccf8c2c33
Fix serial.h indents
2019-07-17 02:03:25 -05:00
Scott Lahteine
ef2a2eb984
Temp tweak
2019-07-17 02:03:25 -05:00
Ludy
abc9b52692
Update copyright in header, etc. ( #14645 )
2019-07-16 22:42:36 -05:00
Scott Lahteine
5535a047d7
[cron] Bump distribution date
2019-07-16 00:00:08 -05:00
Tanguy Pruvot
bae8d0a4bd
DOGM: Avoid white flash on TFT (re)init ( #14631 )
...
- Avoid white flash on TFT (re)init. Unlike Graphical LCD, the TFT init color may be full white if the backlight is on during init.
- Add a conditional for delayed backlight init which can be applied to any backlit display.
2019-07-15 17:36:16 -05:00
thisiskeithb
02859eb2b1
Remove Ender-3 README.md ( #14632 )
2019-07-15 17:19:19 -05:00
thisiskeithb
3d75490b6e
Set correct Ender-5 bed size ( #14633 )
2019-07-15 17:18:27 -05:00
Scott Lahteine
93bc1b17f9
[cron] Bump distribution date
2019-07-15 00:00:08 -05:00
Simon Jouet
f0de56a797
ESP32 HAL - Dynamic ADC attenuation ( #14623 )
2019-07-14 23:32:48 -05:00
Tanguy Pruvot
81d629bc47
Robin & Longer3D SPI TFT driver ( #14595 )
2019-07-14 18:16:26 -05:00
Tanguy Pruvot
45bde333d5
Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support ( #14597 )
2019-07-14 18:05:24 -05:00
Jeonghwan Noh
475ccfad62
Oscar (by Thinknthings of Korea) board support ( #14574 )
2019-07-14 15:36:03 -05:00
Scott Lahteine
fdaa374490
Clean up pins self-checks
2019-07-14 15:34:14 -05:00
Scott Lahteine
77b4f23edc
Update pins comments
2019-07-14 15:19:22 -05:00
Scott Lahteine
1204f2fca8
Fix some config spacing
2019-07-14 13:11:41 -05:00
Scott Lahteine
d4be970c8b
Update DOGLCD conditions
2019-07-14 13:10:13 -05:00
Scott Lahteine
39a5e3ca6e
mftest: Fix multi-line commands
2019-07-14 13:09:16 -05:00
Scott Lahteine
74e1573b14
Update megaatmega2560-tests
2019-07-14 13:09:16 -05:00
Scott Lahteine
2d84bcb4cd
Simplify, update LCD sanity-check
2019-07-14 13:09:16 -05:00
Scott Lahteine
eaf1c0954e
Update some precompiler tests
2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2
Variable tool change purge ( #14618 )
2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8
Fix process_injected_command undefined behavior ( #14602 )
2019-07-14 10:12:48 -05:00
Ringel
e139c1d9d9
Fix ESP32 i2s stream, add PWM to extended pins ( #14592 )
2019-07-14 10:08:14 -05:00
Msq001
21e1148d98
Remove upload_protocol "cmsis-dap" ( #14606 )
2019-07-14 09:43:38 -05:00
Marcio Teixeira
a49478cefa
Fix STATUS_MESSAGE_SCROLLING in LIGHTWEIGHT_UI ( #14603 )
2019-07-14 09:39:03 -05:00
thisiskeithb
bcbd2ff21c
Fix Ender-5 Z axis settings ( #14605 )
2019-07-14 09:32:43 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Ludy
6dcb85927a
Update German language, &c. ( #14613 )
2019-07-14 04:34:55 -05:00
Robby Candra
e96468566d
Fix Z_PROBE_END_SCRIPT in ABL ( #14621 )
2019-07-14 04:28:38 -05:00
Scott Lahteine
a85cd042d8
[cron] Bump distribution date
2019-07-14 00:00:09 -05:00
Scott Lahteine
91bb0f5439
[cron] Bump distribution date
2019-07-13 00:00:09 -05:00
Scott Lahteine
b2b7c583eb
Pins cleanup
2019-07-12 23:07:52 -05:00
Karl Andersson
82cafc9b19
pins_ARMED overrides STM32 defines ( #14587 )
2019-07-12 06:06:04 -05:00
Giuliano Zaro
65a2903aab
Upgrade Travis CI to Python 3.7 ( #14588 )
2019-07-12 05:59:14 -05:00
Scott Lahteine
d3add3c34f
Init servo macro, j/b
2019-07-12 04:53:50 -05:00
InsanityAutomation
f1eaed7e98
Only init servo pins used for servos ( #14589 )
2019-07-12 04:30:15 -05:00
scotthsl
19b24a349c
Fix M412 without HOST_ACTION_COMMANDS ( #14591 )
2019-07-12 04:23:33 -05:00
