David Forrest
09b84faa00
Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0
2014-05-29 17:19:16 -04:00
daid
2acd3792fc
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2014-05-01 12:03:47 +02:00
daid
8b4c4aa5c3
Add feature to check&retry CRC read errors on SD.
2014-05-01 12:03:41 +02:00
Cameron Lai
da6b536182
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
2014-04-24 16:49:42 +08:00
Nutz95
3161740df9
This table is made for thermistor 3950 (can be found on ebay for cheap)
...
it's caracteristics are :
R25℃ ;100KΩ±1%
B Value(R25/50℃):3990K 1%
Dissipation Factor(mW/℃):1.1~1.6 In still Air
Thermal Time Constant(S):10~17 In Still Air
Operating temperature range: (-50~+260°C)
Dimension: 1.8mm Dia X4.1mm
Lead Length :30mm
This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/
and
http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
Gabe Rosenhouse
d3f305332a
Allowable range now includes default value
2014-04-06 19:45:56 -05:00
Gabe Rosenhouse
b0aeac117f
Adjustable Z probe offset, via custom M-code
2014-04-06 19:45:56 -05:00
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-03-26 23:41:10 -04:00
Gabe Rosenhouse
174b8d99d5
Simplify 3-point probing using new code only
2014-02-19 21:48:05 -08:00
Gabe Rosenhouse
3b718b816c
better documentation
2014-02-19 14:04:37 -08:00
Gabe Rosenhouse
34fd59c370
ABL at any points
2014-02-19 13:18:21 -08:00
nothinman
3f455889d0
Merge pull request #769 from Cylindric3D/typofixes_1
...
Various typo fixes - only in comments, no code changes.
2014-02-17 11:30:01 +00:00
nothinman
d4ba23bc28
Merge pull request #770 from josefpavlik/Marlin_v1
...
Marlin v1
2014-02-17 11:27:05 +00:00
Mark Hanford
ab0d3c4fb3
Various typo fixes - only in comments, no code changes.
2014-02-14 11:48:24 +00:00
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:26:27 +01:00
daid
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
2014-02-13 10:53:46 +01:00
Jim Morris
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
ErikZalm
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
2014-02-03 12:33:10 -08:00
David Forrest
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
2014-02-03 14:50:28 -05:00
Ronald
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
David Forrest
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
2014-01-21 23:25:51 -05:00
fsantini
6ae7f7870d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2013-12-23 12:20:32 +01:00
-
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
2013-12-08 21:34:56 +01:00
Michal Dyntar
e8786bf110
Added support for Cheaptronic v1 electronic
2013-12-07 13:29:47 +01:00
fsantini
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
...
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
2013-12-06 21:46:25 +01:00
Alex Borro
b33375d438
Z Axis Safe Homing when using Z Probe
...
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
2013-11-27 22:37:35 -02:00
Erik van der Zalm
48a185d004
Fixed compile errors from bad commits.
2013-11-10 16:36:37 +01:00
ErikZalm
59b96e323e
Merge pull request #640 from fmalpartida/SAV-MkI
...
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
2013-11-10 07:26:08 -08:00
fmalpartida
7b556d2e96
Added BT support on AT90USB devices
...
Added AT90USB device BT connectivity support using second UART.
2013-11-03 19:57:06 +01:00
Kaz Walker
a5e8575829
Add UUID support to M115 responses.
2013-11-01 14:51:50 -06:00
fmalpartida
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
...
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
2013-10-30 11:45:32 +01:00
dumle29
f941203172
PS_ON configurable boot state
...
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
2013-10-29 18:44:56 +01:00
Erik van der Zalm
8a08cca0f2
Added temperature status less.
...
Hopefully fixed viky button handling without braking other boards
2013-10-20 12:12:35 +02:00
ErikZalm
6a803ba9c5
Merge pull request #590 from timkoster/Marlin_v1
...
Added BlinkM support over i2c
2013-10-20 00:51:35 -07:00
Alex Borro
6f85a8c7aa
Bed auto Leveling change: Raise Z before homing
...
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.
- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
2013-10-12 17:28:11 -03:00
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
phq1910
57173739a1
Update Configuration.h
...
Include CPU Sethi 3D
2013-09-26 11:29:44 -03:00
Erik van der Zalm
0dca49a7c0
Added Azteeg X3 board.
2013-09-24 17:31:16 +02:00
Erik van der Zalm
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
2013-09-23 23:29:46 +02:00
Erik van der Zalm
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
2013-09-23 23:25:11 +02:00
Tim Koster
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
2013-09-20 10:57:42 +03:00
Erik van der Zalm
3626b5ad8b
Removed Delta from the default config file.
...
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
2013-09-14 13:50:09 +02:00
Tim Koster
88dfeefca3
Define BlinkM default disabled
2013-09-10 12:32:21 +03:00
Tim Koster
5350faf2a2
Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1
2013-09-10 12:27:26 +03:00
Tim Koster
7016cc9511
Added BlinkM support over i2c
2013-09-10 12:18:29 +03:00
Tim Koster
3b315b3da0
Added BlinkM support over i2c
2013-09-06 22:25:39 +03:00
Nicolas Rossi
a54fe2d73c
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Marlin_main.cpp
2013-08-03 13:05:56 +02:00
hg42@gmx.net
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-01 15:06:39 +02:00
Nicolas Rossi
9bf1cf1b22
Pre-calculate diagonal rod length squared
2013-07-30 14:09:21 +02:00
Nicolas Rossi
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:02:18 +02:00