Erik van der Zalm
bdb70c0509
Warning for 10k thermistor
2012-02-08 18:38:45 +01:00
Erik van der Zalm
5113513cb2
RC 1
2012-02-08 18:28:54 +01:00
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00
Erik van der Zalm
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
2012-02-06 20:13:44 +01:00
Erik van der Zalm
292ddd2edb
Fix Z_LATE_ENABLE
2012-02-06 17:38:16 +01:00
Erik van der Zalm
abb7e63906
fixed z-disable bug.
2012-02-05 21:14:55 +01:00
Erik van der Zalm
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
2012-02-05 13:05:07 +01:00
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
2012-02-05 12:42:15 +01:00
ErikZalm
7c6141ebc4
Merge pull request #54 from haxar/patch-1
...
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (p...
2012-02-05 02:19:35 -08:00
haxar
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
2012-01-22 03:25:56 -08:00
Bernhard
157aa7f2fd
m115 eol fix
2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d
small mistake
2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
2012-01-15 17:06:10 +01:00
Bernhard
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
Bernhard
729cde4475
fix autostart failure if in wrong directory
2011-12-26 09:20:53 +01:00
Bernhard
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
2011-12-26 09:20:21 +01:00
Bernhard
11f2dafc4e
one step closer to a functional makefile..
2011-12-22 16:43:28 +01:00
Bernhard
8463e39a4a
starting with sanguino arduino 1.0 compatibility
2011-12-22 16:11:15 +01:00
Bernhard
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
2011-12-22 14:57:28 +01:00
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Bernhard
212515148e
added m240 photography support. default off
2011-12-22 12:11:39 +01:00
Bernhard
6735025428
cooldown
2011-12-22 12:02:33 +01:00
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
2011-12-22 11:45:52 +01:00
Bernhard
4bababf5b0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-12-22 09:22:39 +01:00
Bernhard
f312216e97
Revert "untestest commit, so I don't loose code.. features runout prevention addons"
...
This reverts commit 651cde8b98
2011-12-22 09:22:22 +01:00
Bernhard
651cde8b98
untestest commit, so I don't loose code.. features runout prevention addons
2011-12-22 09:20:34 +01:00
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76
G92 fix
2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
3320a5b37d
make autotemp compatile for use without pid
2011-12-11 22:25:52 +01:00
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
2011-12-11 22:18:50 +01:00
Bernhard
82c99625fa
instant stop of sd prints from the panel.
2011-12-11 22:10:06 +01:00
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
2011-12-11 15:42:56 +01:00
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
2011-12-09 17:07:44 +01:00
Bernhard
b1d84d879b
st_synchronize back to normal..
2011-12-09 16:13:58 +01:00
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9
disable steppers in runout prevention
2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474
better values.
2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a
extruder runout prevention.
2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
2011-12-09 12:51:08 +01:00
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
2011-12-09 12:33:00 +01:00
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
2011-12-09 12:32:31 +01:00
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-08 12:25:32 +02:00
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
2011-12-07 23:08:13 +01:00
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
2011-12-07 20:56:47 +01:00
Bernhard
460b788d78
repaired homing position setting.
2011-12-07 20:54:34 +01:00
