Commit graph

6326 commits

Author SHA1 Message Date
Scott Lahteine c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine fb3c30e24c Fix lcd_wait_for_homing causing menu to block
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk aab5118c6a Remove error causing break command
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj d38e335272 From "microseconds" to "milliseconds"
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt 8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine 4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine 5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine 922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine 8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine 92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk 306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650 84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine 83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine 036eccfd6e Merge pull request #5572 from Kaibob2/patch-5
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine b794b76836 Merge pull request #5567 from AnHardt/fix5194
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine 451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine 92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai ade72535c4 Update language_de.h
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt 61f15ef7e7 Fix 5194
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj 60515ff700 Update Japanese translation
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine 1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine 1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine 7739c0affa Change "+mm" to "mm" in most languages
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine 1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine 298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine 644f45cbd8 Merge pull request #5563 from akaJes/m600
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine 0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine 22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus 4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien 4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine 18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine 03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine 1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine 41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine 6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine 20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine 82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine 8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann a7334fd2a0 Allow negative retract values in the LCD
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt 292eb365c6 Optimize handling of block_buffer_runtime()
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj 6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine 3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra 86ba7e4542 Fix size
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine 87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine 2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine 0b6817e0f9 Merge pull request #5505 from android444/patch-4
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine 3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine 78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine 0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine 6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine 32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine 8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine 492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine 55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine 2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine 04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine 9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine 8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine 0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine 1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj d486361c69 Fix for commented section of Config_RetrieveSettings() 2016-12-16 04:34:47 +09:00
esenapaj 88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj 069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
esenapaj 9c8116aedf Update Japanese translation
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt 57b1275cde Add symbol-string to _de
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444 3363d2c937 Update for translations language_pl.h 2016-12-14 17:32:33 +01:00
Scott Lahteine 06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
Scott Lahteine 67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
Scott Lahteine 8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine 77a360912d Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt d0e24e0876 Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev 2dbd38ce16 tag the utf-8 strings 2016-12-13 11:54:35 -05:00
Scott Lahteine 94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine 0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine b2c8de856b Merge pull request #5478 from AnHardt/stepspermm
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine 1fd8185d37 Merge pull request #5492 from thinkyhead/rc_fix_language_es
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev 1cdffdede7 fix multiple definitions of message macros in the language-es.h 2016-12-13 06:48:38 -08:00
Scott Lahteine b67f8cb499 Merge pull request #5490 from jbrazio/update-bqhp2
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine 93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine 48aa0f6475 Merge pull request #5475 from AnHardt/utf-mapper-tr
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine b9ee0d7bd3 Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine 641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine 7b625e0048 Patch fade_factor compiler warning 2016-12-13 02:29:01 -08:00
Scott Lahteine 6fa8fd15e2 Add negative temperatures for Thermistor 1
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine 2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
Scott Lahteine 887ed73c9b Expose delta_clip_start_height for use by others 2016-12-13 01:41:08 -08:00
João Brázio 3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Daniel Martinez b796e7031d Update Aragonese translation 2016-12-12 17:36:33 -08:00
AnHardt cd2b74e88d Replace ftostr62sign with ftostr62rj
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt 795541f87e utf8-mapper for Turkish
The non utf8 version of turkish is a bit unhandy.

Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine 7c71bb2900 Merge pull request #5471 from thinkyhead/rc_planner_report_m503
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine 39401b7472 Patch to show E factors in M503 2016-12-11 17:37:29 -08:00
Scott Lahteine 6b50230022 Merge pull request #5447 from thinkyhead/rc_update_dutch
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine 2c97c11731 Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine 8239c45b30 Merge pull request #5448 from thinkyhead/rc_eeprom_bump
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine 21ed43df5f New Dutch terms 2016-12-10 21:59:45 -08:00
Scott Lahteine 4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
Scott Lahteine 6f389158d7 Compile less code with EEPROM off 2016-12-09 06:05:32 -08:00
Scott Lahteine f2301a2a04 Add e-stepper count to EEPROM (for planner vars) 2016-12-09 06:05:31 -08:00
Scott Lahteine 53c9fca0f6 Only write to EEPROM when a byte changes 2016-12-09 06:05:31 -08:00
AnHardt 13eebd11cf volatile_block_buffer_runtime_us
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine 8383f35b40 Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B 40453c1b9a Update french translation (LIGHTS str) 2016-12-09 11:18:29 +01:00
Scott Lahteine fc2fc828b3 Prettify LIN_ADVANCE code with the positive condition 2016-12-09 00:29:07 -08:00
Scott Lahteine 1929502e15 Add const to some variables 2016-12-09 00:29:06 -08:00
Scott Lahteine 2da4d22520 Pretty up ADVANCE code 2016-12-08 22:51:28 -08:00
Scott Lahteine af024e1d7c Pretty up coast / reverse jerk code 2016-12-08 22:50:25 -08:00
Scott Lahteine 3f3b5c86d8 Slightly shrink code for jerk-based reduction of safe_speed 2016-12-08 22:24:29 -08:00
AnHardt 87fe20b5f5 Simplify long_move()
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine 574d9c7d3d Merge pull request #5432 from Kaibob2/patch-2
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine f089279263 Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine d92ccb230c Merge pull request #5438 from AnHardt/patch-long_move
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt 706b240251 Patch long_move()
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Kai 390a6d976a Update language_de.h
#define MSG_ENDSTOP_ABORT  doesn't fit in Display 
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj e9393c3634 Suppress warnings, etc
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine 3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
Scott Lahteine c8a95ec514 Merge pull request #5413 from MagoKimbra/rc_fix_mesh
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine 35ad9626f1 Merge pull request #5410 from thinkyhead/rc_polish_update
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine 01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
MagoKimbra 5383212a28 Fix Mesh without Fade Height 2016-12-07 09:23:42 +01:00
Scott Lahteine dbe1dc1452 Merge pull request #5406 from Rigid3D/RCBugFix
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine 4783a59249 Remove filament-change empty lines from languages 2016-12-07 00:53:03 -06:00
Scott Lahteine 1705099c3e Save space by not defining unused filament change message lines 2016-12-07 00:53:03 -06:00
android444 9b1f4b514b Update Polish language
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko 84f7e1de04 Updates to Croatian language 2016-12-06 22:24:12 -06:00
esenapaj 08cdaaf19b README and Version for 1.1.0-RCBugFix
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas f4663cb677 Update language_tr_utf8.h 2016-12-07 00:21:56 +03:00
Mehmet Sutas b4fd115d4e Update language_tr.h 2016-12-07 00:20:07 +03:00
Scott Lahteine 83c5026db1 Ignore homing button when SD printing
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
Scott Lahteine 312caef472 Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
Fix Croatian spacing, extra #endif
2016-12-06 03:22:19 -06:00
Scott Lahteine 46b65773ea Fix Croatian spacing, extra #endif 2016-12-06 03:10:37 -06:00
Scott Lahteine 3f2faac9d1 Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
Subdivide Bilinear Grid with Catmull Rom Splines
2016-12-05 20:28:50 -06:00
Scott Lahteine b5b5edd9ad Merge pull request #5394 from thinkyhead/rc_drop_board_99
Remove mystery-board 99
2016-12-05 20:28:35 -06:00
Scott Lahteine c48901f355 Remove mystery-board 99 2016-12-05 20:16:50 -06:00
akaJes d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine 6253b765aa Merge pull request #5389 from thinkyhead/distribute_screen_updates
Distribute GLCD screen updates in time
2016-12-05 20:08:33 -06:00
Scott Lahteine b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt 59a27ed27d Fix auto_report_temperatures()
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
AnHardt a6fbd4a5d8 Distribute GLCD screen updates in time
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine 20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine 449d9cbf60 Add placeholders for Polish translatable strings 2016-12-05 10:37:00 -06:00
c64pl 643dc4b64e Update language_pl.h
Fixed translations
2016-12-05 10:37:00 -06:00
Scott Lahteine 0974b75fb6 Merge pull request #5386 from thinkyhead/rc_galician_update
Galician language update.
2016-12-05 10:36:26 -06:00
Rafa Couto 2b9115330d Galician language update. 2016-12-05 10:11:28 -06:00
Scott Lahteine 1f3e2440bc Merge pull request #5175 from thinkyhead/rc_dualx_homing
Unpark when using Z_SAFE_HOMING with Dual X
2016-12-05 10:02:56 -06:00
Scott Lahteine d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Guthenberg bfb8d3b53e Show more decimals in Display, if possible
_123, -123, _-12, __-1  plus  1234, 12.3, -1.2
2016-12-05 09:05:46 -06:00
Scott Lahteine 1e30d1da47 Simplify itostr4sign
- This function becomes obsolete if ftostr4sign is re-written.
2016-12-05 09:05:46 -06:00
Scott Lahteine 82a187acae Merge pull request #5359 from AnHardt/update-de
Add missing translations to lang-de
2016-12-05 07:31:28 -06:00
Scott Lahteine 4bafdf4b66 Support DISTINCT_E_FACTORS in LCD Motion Menu 2016-12-05 07:26:18 -06:00
Scott Lahteine 3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine 0dfe95eaba Adjust formatting in Planner 2016-12-05 07:26:17 -06:00
Scott Lahteine 09587f7c0d Fix rows error in DOGM 2016-12-05 07:14:11 -06:00
Scott Lahteine c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine 4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine 0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine 54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine 41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine 053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine ee50928eee Make LOGICAL and RAW position macros ternary-compatible 2016-12-05 06:43:26 -06:00
Scott Lahteine 56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine 200cf3e9f9 Merge pull request #5381 from thinkyhead/rc_fix_fade_factor
Properly apply fade_factor to MBL
2016-12-05 06:06:13 -06:00
Scott Lahteine 84ff78c1e3 Pass the fade factor to mbl.get_z 2016-12-05 03:01:51 -06:00
Scott Lahteine 85c2b96685 Apply const to MBL class methods 2016-12-05 02:50:59 -06:00
Scott Lahteine c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine 818f8b93d3 Merge pull request #5378 from thinkyhead/rc_duration_rj
Better alignment of elapsed print time
2016-12-04 22:42:23 -06:00
Scott Lahteine 9d88a61d52 Better alignment of elapsed print time 2016-12-04 21:30:49 -06:00
Scott Lahteine 0b53d78046 Tweak editable items for debugging 2016-12-04 03:51:10 -06:00
Scott Lahteine fccc97de6d Save PROGMEM with string changes
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
2016-12-03 19:21:46 -06:00
AnHardt e7fc353f08 Add missing translations to lang-de 2016-12-03 20:51:49 +01:00
Scott Lahteine 3f2cb376e0 Add placeholders for Bulgarian translation 2016-12-03 12:14:02 -06:00
Scott Lahteine b22d37ba52 Merge pull request #5364 from thinkyhead/rc_croatian_update
Update Croatian to include missing strings
2016-12-03 11:37:42 -06:00
Robert Marko b796a687ca Update Croatian to include missing strings
Added all missing strings according to English
2016-12-03 11:15:41 -06:00
Scott Lahteine 255ed80164 Fix hotend offset report in M503 2016-12-03 10:17:35 -06:00
Petr Zahradník c66f3ed34b
Update Czech 2016-12-03 10:32:34 +01:00
Scott Lahteine cbf208ea1f Merge pull request #5348 from Kaibob2/patch-1
Update language_de.h
2016-12-03 01:53:24 -06:00
Scott Lahteine a2660cf688 Merge pull request #5347 from tnw513/fix-italian
Added missing translations
2016-12-03 01:52:45 -06:00
Scott Lahteine 27dd5acc22 Fix set_led_color for BLINKM
Follow-up to #5330
2016-12-03 01:51:11 -06:00
Kai 8530c32309 Update language_de.h
Grammar corrections
2016-12-02 19:40:36 +01:00
Silvio Didonna f1d5ffa211 Added missing translations 2016-12-02 18:49:39 +01:00
Scott Lahteine b0361ebe4f Merge pull request #5343 from thinkyhead/rc_invert_case_light
Allow case light pin to be active low
2016-12-02 01:17:11 -06:00
Scott Lahteine f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine 3f4c02e42f Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
Allow UART ISRs inside the stepper ISR
2016-12-01 23:17:42 -06:00
Scott Lahteine d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine 47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine 8d14420331 Fix compile without ENABLE_LEVELING_FADE_HEIGHT 2016-12-01 11:37:24 -06:00
Scott Lahteine 415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj 0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj 8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support)
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine e00b380489 Merge pull request #5323 from akaJes/lang-ua
Adding ukrainian language support
2016-11-30 01:10:40 -06:00
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
esenapaj 3047f3c85c Suppress warning 2016-11-30 00:32:56 +09:00
jes f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
jes c90191faaf adding ukrainian laguage support 2016-11-29 14:49:45 +02:00
Sebastianv650 912704a0d8 Enable ISRs inside temperature ISR
to capture chars at UART at 250000 baud.
2016-11-28 20:08:50 +01:00
Sebastianv650 f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine e9e4208ff1 Merge pull request #5274 from Sebastianv650/improve_smooth_moves
Improvement for ENSURE_SMOOTH_MOVES
2016-11-28 02:22:08 -06:00
Scott Lahteine c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine 32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine 13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine 59fafb93b2 Merge pull request #5304 from AnHardt/pixel-shifting
MENU_HOLLOW_FRAME for the menu screens
2016-11-28 01:41:47 -06:00
Scott Lahteine 0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine 61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt 7a9fa78822 MENU_HOLLOW_FRAME for the menu screens
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
AnHardt 24ca1a6289 Not more then 4 stripes for u8g-devices
To optimise speed.
Costs well invested 128Byte of RAM.
2016-11-26 19:08:33 +01:00
Scott Lahteine aee71c543e Minor formatting in language.h 2016-11-26 06:53:52 -06:00
Scott Lahteine 05d8d189f6 Adjust spacing in utf_mapper.h 2016-11-26 06:53:52 -06:00
Scott Lahteine 5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine 71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine b1abd7edef Optimize graphical display with selective rendering 2016-11-26 06:53:52 -06:00
AnHardt b91fab2d7d Fix USE_BIG_EDIT_FONT 2016-11-26 13:50:25 +01:00
Scott Lahteine 4cd73e183d Hide hidden files and folders 2016-11-26 06:26:28 -06:00
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
AnHardt 75fdcc14b7 Activate font and mapper for el-gr 2016-11-26 02:30:37 +01:00
AnHardt a0004e7cd3 Change font decent to -1 for tt and gr
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
2016-11-26 02:29:23 +01:00
Scott Lahteine 307f263f89 Merge pull request #5292 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-25 16:56:49 -06:00
esenapaj 7070143042 Update Japanese translation
・Add new translation
2016-11-24 21:10:40 +09:00
esenapaj ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine 2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine 2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine f60321d3e3 Merge pull request #5284 from thinkyhead/rc_turkish_update
Turkish update (squashed)
2016-11-23 14:57:52 -06:00
Mehmet Sutas a26668b10c Add UTF8 Turkish Translation 2016-11-23 14:19:16 -06:00
Mehmet Sutas 61aa796307 Added Human Readable Comments 2016-11-23 14:19:16 -06:00
Mehmet Sutas 6fb9c6fe07 Follow-up for #5167 Turkish Language
Add check for Turkish Font before setting better font for graphic displays
2016-11-23 14:19:15 -06:00
Scott Lahteine d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine 7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai e9b42f4f47 Update language_de.h 2016-11-23 19:29:19 +01:00
Kai 0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine 3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine 14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine 38466b1d2f Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
2016-11-21 13:55:56 -06:00
Scott Lahteine 9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Sebastianv650 8190483eeb Improvement for ENSURE_SMOOTH_MOVES
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
2016-11-21 17:58:24 +01:00
esenapaj da67037550 Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
・Fix memory leak
2016-11-21 22:31:01 +09:00
Scott Lahteine 0f891e848b Merge pull request #5268 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-21 03:18:36 -06:00
esenapaj 190a04c467 Update Japanese translation
・Change translation for 16 width LCD
2016-11-21 17:51:43 +09:00
esenapaj 7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Scott Lahteine 3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine 644fac5d34 Reduce all stepper_indirection init code with macros 2016-11-21 00:52:18 -06:00
Scott Lahteine 4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine 127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Scott Lahteine bf5f5f44cc Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine 11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Sebastianv650 50059690e0 Allow UART ISRs inside the stepper ISR
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.

With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
2016-11-20 13:09:12 +01:00
Moshen Chan 29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
AnHardt 88b38eafd8 Endstop interrupt refinement
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
2016-11-19 13:30:49 +01:00
Scott Lahteine 79c8591192 Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
Ensure smooth print moves even with LCD enabled
2016-11-19 01:38:41 -06:00
Scott Lahteine 0215cacb30 Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-19 01:32:40 -06:00
Scott Lahteine 2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Scott Lahteine 072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Sebastianv650 de89dc9f04 Ensure smooth print moves even with LCD enabled
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Scott Lahteine 87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine 0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine 7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine 181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine 25d0c167bd More detailed static_assert messages 2016-11-18 22:24:46 -06:00
Scott Lahteine eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS cbae44df64 K8200: Example configuration back in sync
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
esenapaj 5db3738fe7 Re-follow the PR #4634 (Set language display charset in language.h) 2016-11-18 17:44:49 +09:00
Scott Lahteine 6eb6f12c64 Patch up some language formatting 2016-11-18 01:16:58 -06:00
Bo Herrmannsen 8cffa60cc5 Update to Danish language 10/11-2016 2016-11-18 01:16:57 -06:00
Scott Lahteine 98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann d08867986e Add autotemp capabilities to M104
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00
Sebastianv650 c11b2bb777 Bugfix LIN_ADV
Advance has nothing todo with Z_AXIS, strange copy&paste error?
2016-11-17 11:28:19 -06:00
Scott Lahteine ee0765e872 Merge pull request #5233 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-17 03:38:19 -06:00
Scott Lahteine 2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
esenapaj b278b7a395 Update Japanese translation
Only adjust spacing
2016-11-17 09:05:51 +09:00
Petr Zahradník junior d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine d63230d73e Merge pull request #5192 from Kaibob2/patch-7
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-16 00:16:36 -06:00
Scott Lahteine 548b45026d Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
Save some cycle inside the planner
2016-11-16 00:06:55 -06:00
Scott Lahteine 5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 19:12:01 -06:00
Scott Lahteine db47aa983d Merge pull request #5226 from mtowara/RCBugFix
bump -std in Makefile to c++11
2016-11-15 16:13:32 -06:00
Scott Lahteine 99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Markus Towara 23a675f621 reduce binary size of .hex
still a few bytes bigger than with arduino but nothing major
2016-11-15 21:57:15 +01:00
Markus Towara 5b6e2cecf5 bump c/c++ standard to gnu11
needed for constexpr
2016-11-15 21:54:12 +01:00
Scott Lahteine 410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt f3eee02596 Introduce endstop interrupts
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
Sebastianv650 e3ffb58fbd Save some cycle inside the planner
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?

planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
2016-11-13 13:34:12 +01:00
Scott Lahteine 665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster
Store mix factors as reciprocals and multiply
2016-11-12 18:47:11 -06:00
Scott Lahteine 60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support
Extended host support: M155 Auto temp report, M115 capabilities
2016-11-12 15:38:06 -06:00
Scott Lahteine f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine ea3c08d249 Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
Follow up the PR #5167 (Add Turkish Language) again, etc
2016-11-12 13:11:54 -06:00
Scott Lahteine c488378532 Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
Remove useless line from stepper ISR
2016-11-12 12:43:07 -06:00
Michael Neumann 8bdf303da0 Update pins_MEGATRONICS_3.h 2016-11-12 12:26:07 +01:00
Michael Neumann 3890366c83 Update pins.h 2016-11-12 12:25:45 +01:00
Michael Neumann c0d45ca7f2 Update boards.h 2016-11-12 12:24:47 +01:00
Sebastianv650 cdc18f8c22 Remove useless line from stepper ISR
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
2016-11-11 19:35:03 +01:00
Kai 8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine 3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine 68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine 68b46fb2c9 Allow send to i2c address 0 (broadcast) 2016-11-08 17:54:55 -06:00
Scott Lahteine 75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj 2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine 06f2282f82 Merge pull request #5176 from thinkyhead/rc_filchange_feedback
Give instant feedback for filament change
2016-11-07 12:11:54 -06:00
Scott Lahteine dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine 7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
esenapaj 24e3f7abe7 Update Turkish translation
・Add new translation
2016-11-07 04:59:18 +09:00
esenapaj be48792e9c Follow up the PR #5167 (Add Turkish Language), etc
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
2016-11-06 23:59:02 +09:00
Scott Lahteine 1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Scott Lahteine e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D 2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Nikolay Zinov dea00bbcf1 improve G30 probing
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine 00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
Scott Lahteine b23d255491 Move macros above Stepper::babystep 2016-11-03 23:31:45 -05:00
Scott Lahteine cc57d46158 Fix set_position for CoreYZ 2016-11-03 23:31:45 -05:00
Scott Lahteine 0269347682 Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
OLD_SLOWDOWN does nothing, so remove it
2016-11-03 23:30:43 -05:00
Scott Lahteine e92e2b2446 Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
Account for wipe moves
2016-11-03 23:19:25 -05:00
Scott Lahteine 176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Sebastianv650 d448500643 Account for moves with negative E movements
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
2016-11-03 17:01:17 +01:00
Scott Lahteine 236853df22 Corrections to bilinear_line_to_destination
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine 0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00
Scott Lahteine 2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Scott Lahteine d6c36f5bb9 Fix Z raise with DXC_AUTO_PARK_MODE 2016-11-02 21:36:50 -05:00
Scott Lahteine 0c79553fc5 Cast int to AxisEnum for some accessors 2016-11-02 17:42:24 -05:00
Scott Lahteine adbf1f7dca Add M355 to the GCodes list. 2016-11-02 16:43:52 -05:00
Scott Lahteine 63efc10599 Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
Split cartesian moves on grid boundaries with bilinear ABL
2016-11-02 16:14:55 -05:00
Scott Lahteine 12167bc8f3 OLD_SLOWDOWN does nothing, so remove it 2016-11-02 01:28:19 -05:00
esenapaj c8c1a28f6f Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
bool feedback is no longer used
2016-11-02 08:36:02 +09:00
esenapaj c3a105186d Follow-up the PR #5133 (M355 Case light)
・Add CASE_LIGHT_PIN into pinsDebug.h
2016-11-02 00:31:50 +09:00
Scott Lahteine ee5b8d6dc8 Split moves on grid boundaries with bilinear ABL on cartesian 2016-11-01 08:25:47 -05:00
Scott Lahteine 66744a6076 Merge pull request #5133 from thinkyhead/rc_M355_case_light
M355 Case light
2016-11-01 07:51:27 -05:00
Scott Lahteine 955d14acb0 Patch photo pin code style 2016-11-01 06:30:14 -05:00
Stanley ab3f966f5f Case light G-code M355
implemented G-Code M355 into Marlin
2016-11-01 06:30:14 -05:00
Scott Lahteine 8b44413498 Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch
BugFix for incorrect E-speed calculation
2016-11-01 05:13:17 -05:00
Scott Lahteine f418e82b15 Remove redundant definition of EN_C 2016-11-01 05:10:07 -05:00
Sebastianv650 f9bea7968f BugFix for incorrect E-speed calculation
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
2016-11-01 08:08:47 +01:00
Bob-the-Kuhn c20b4098be 2 bug fixes & some minor changes
see detailed  description in PR #5118
2016-11-01 01:29:41 -05:00
Scott Lahteine fa6bf12697 Merge pull request #5118 from thinkyhead/rc_expanded_M43
Enhancements to M43 pins debugging
2016-10-31 08:29:53 -05:00
Scott Lahteine 3a107e280d Developer note in pins_MIGHTYBOARD_REVE.h 2016-10-31 08:22:39 -05:00
Scott Lahteine 85e307dcd8 No FAN0_PIN 2016-10-31 08:08:03 -05:00
Scott Lahteine ff3a8ca0d1 Use NUM_DIGITAL_PINS instead of custom DIO_COUNT 2016-10-31 08:08:03 -05:00
Scott Lahteine 04a1fac029 Some cleanup to M43 2016-10-31 08:08:03 -05:00
Scott Lahteine 24f6612551 Reduce and optimize endstop_monitor code 2016-10-31 08:08:03 -05:00
Scott Lahteine b4444e91ae Reduce code and build size of PWM_details 2016-10-31 08:08:02 -05:00
Scott Lahteine dbe414ef03 Squash redundant code in PWM_status 2016-10-31 08:08:02 -05:00
Scott Lahteine af26d22741 Clean up some spacing and semantics 2016-10-31 08:08:02 -05:00
Bob-the-Kuhn 81397d7a9a EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
2016-10-31 08:08:02 -05:00
Bob-the-Kuhn c7f1f0dae6 Add endstop monitor & make pins report pretty 2016-10-31 08:08:02 -05:00
Scott Lahteine d567b426d5 Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
Mightyboard Revision E preliminary support
2016-10-31 08:01:41 -05:00
Scott Lahteine 43df9ace4e Merge pull request #5110 from thinkyhead/rc_z2_min_allowed
Support Z2 min in M119 report
2016-10-31 07:59:45 -05:00
Scott Lahteine 23f05f8be7 Use bit-length types in block_t 2016-10-30 16:16:29 -05:00
Scott Lahteine 8dc7807d85 Add support for CoreYZ to planner.buffer_line 2016-10-30 16:16:28 -05:00
Scott Lahteine 1cf878fdb1 Calculate dm and e-steps earlier in planner 2016-10-30 16:16:28 -05:00
Scott Lahteine 75dbb71dd7 Replace block.busy with a block.flag bit 2016-10-30 16:16:28 -05:00
Scott Lahteine c7f22f688f buffer_line can calculate while it's waiting 2016-10-29 17:08:42 -05:00
Scott Lahteine f3720f4e81 const arguments to test_dual_z_endstops 2016-10-29 16:01:27 -05:00
Scott Lahteine 8cebd2a7db Arrange Z2 min before Z2 max 2016-10-29 01:54:19 -05:00
Scott Lahteine accabf088a Add support for Z2 min endstop to M119 2016-10-29 01:54:02 -05:00
Scott Lahteine 396434a445 Fix compiler warning in M145 2016-10-28 20:57:36 -05:00
Scott Lahteine 8e787304c9 const float ref args in planner.h 2016-10-28 20:57:36 -05:00
Scott Lahteine 07bfc45df8 Adjust spacing in gcode_M149 2016-10-28 20:57:36 -05:00
Scott Lahteine 1a2310c494 Make LCD preheat vars an array to reduce code size 2016-10-28 20:57:36 -05:00
Scott Lahteine 1226ae1912 Some cleanup in ultralcd.h 2016-10-28 20:57:21 -05:00
Scott Lahteine 50ee749082 Centralize click-handling in the LCD loop 2016-10-28 20:57:21 -05:00
Scott Lahteine 47ad97c35e Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
Save hotend_offset array (M218) in EEPROM
2016-10-28 20:08:29 -05:00
Scott Lahteine bff6bbdb12 Indentation in configuration_store.cpp 2016-10-28 18:55:42 -05:00
Scott Lahteine 97115d56f9 Print error for M500 with disabled EEPROM 2016-10-28 18:53:48 -05:00
Scott Lahteine 67ab54185b Save hotend_offset array (M218) in EEPROM 2016-10-28 18:45:23 -05:00
MagoKimbra dfcdbb437b Fix Command M420 2016-10-28 20:53:48 +02:00
Scott Lahteine c34dbfb248 Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
Add predefined AUTO_FAN_PINs to pins files
2016-10-27 17:12:11 -05:00
Scott Lahteine 9a23f73765 Don't trigger endstops that are actually Z2 or probe 2016-10-27 08:12:17 -05:00
Scott Lahteine c07cc9e3f1 Revert changes made to z dual endstop test
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
2016-10-27 07:41:39 -05:00
Scott Lahteine c4c53856a4 Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-26 21:51:18 -05:00
Scott Lahteine 2e3110539b Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math
Fix bilinear grid constraints
2016-10-26 21:48:19 -05:00
esenapaj d5a5042d23 Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL) 2016-10-27 10:32:20 +09:00
Scott Lahteine 9cbedab91b Use DPM where possible 2016-10-26 18:38:32 -05:00
Scott Lahteine ad38d91692 Sanity check that auto fan pins can do PWM 2016-10-26 18:38:32 -05:00
Scott Lahteine 95275eb9b3 Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
Scott Lahteine 3f94b15cef Fix bilinear grid constraints
Followup to #5090
2016-10-26 18:11:26 -05:00
Scott Lahteine d439fb95f7 Sanity check for the renamed options 2016-10-26 17:51:26 -05:00
Scott Lahteine b6aa894893 Rename auto fan pins and add auto fan flags 2016-10-26 17:51:26 -05:00
Scott Lahteine ada935de87 Allow TEMP_STAT_LEDS with only one LED defined 2016-10-26 17:51:26 -05:00
Scott Lahteine 4b056d8184 Fix warning in ultralcd.cpp 2016-10-26 17:51:26 -05:00
Scott Lahteine 9dfd029911 Fix bug in fastio.h _GET_TIMER 2016-10-26 17:51:25 -05:00
esenapaj 8b1d90e281 Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
・Add header
・Adjust spacing
2016-10-27 06:46:03 +09:00
Scott Lahteine bfd3b3c604 Merge pull request #5087 from Fulg/azteeg-x3-pins
Fixed SERVO pins on Azteeg X3
2016-10-26 06:01:16 -05:00
Scott Lahteine 208d720614 Merge pull request #5082 from Fulg/RCBugFix
Only issue MAXTEMP when heating
2016-10-26 05:55:33 -05:00
Scott Lahteine f0d673561f Fix for bilinear grid outside bounds 2016-10-26 05:00:03 -05:00
Scott Lahteine 24bcea6c02 Merge pull request #5088 from thinkyhead/rc_break_m1_fix
Handle M108 in M1 also with ULTIPANEL
2016-10-26 00:44:01 -05:00
Scott Lahteine 1ba1ec0db9 Handle M108 in M1 also with ULTIPANEL 2016-10-25 23:25:47 -05:00
Scott Lahteine 7ad33422e3 Clear dir_t size, not pointer size 2016-10-25 22:59:40 -05:00
Benoit Miller 1c716034ec Fixed SERVO pins on Azteeg X3 2016-10-25 17:11:26 -04:00
Benoit Miller 2aa12d78dc Only issue MAXTEMP when heating 2016-10-24 17:09:29 -04:00
Scott Lahteine 3fcf915808 Fix uninitialized var in reset_acceleration_rates 2016-10-24 11:55:41 -05:00
Scott Lahteine 14f824c3de Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple
Extend measuring range of thermocouple for MAX31855
2016-10-24 02:00:12 -05:00
Scott Lahteine 1097a50694 Merge pull request #5070 from gcormier/rcbugfix
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-24 00:56:36 -05:00
Sebastianv650 c397b9d60a Planner acceleration bugfix and speedup v2
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
2016-10-23 12:47:46 +02:00
esenapaj 70e287ca8c Extend measuring range of thermocouple for MAX31855 2016-10-23 10:22:39 +09:00
Greg Cormier f0aed9dac7 Fix #4995 - M48/G29 on CoreXY maybe others? 2016-10-22 20:45:13 -04:00
esenapaj e50992694f Fix for the PR #5066 (Updated french translation)
MSG_INFO_PRINT_TIME is still being used
2016-10-23 06:09:56 +09:00
Scott Lahteine 483082387c Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
2016-10-22 13:54:09 -05:00
Scott Lahteine 8b967a9ff0 Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
Apply encoder reverse options to keypad arrows
2016-10-22 13:52:35 -05:00
esenapaj 523c7eaa6c Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD)) 2016-10-23 03:29:00 +09:00
Scott Lahteine ca48a49fdb Merge pull request #5065 from petrzjunior/transl
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
2016-10-22 12:46:10 -05:00
Scott Lahteine f0744fc815 Merge pull request #5066 from thinkyhead/rc_french_update
Updated french translation
2016-10-22 12:45:51 -05:00
Gege2B 88b7f6eb46 Updated french translation 2016-10-22 12:30:22 -05:00
Scott Lahteine 3544c3632f Merge pull request #5062 from thinkyhead/rc_warnings_fix
Warnings fixed redux
2016-10-22 12:21:36 -05:00
Petr Zahradník junior 8323d78ed7 Translated BLTOUCH and DAC strings 2016-10-22 19:12:21 +02:00
Scott Lahteine e151f952a3 Apply encoder reverse options to keypad arrows 2016-10-22 11:51:33 -05:00
Scott Lahteine cfb47929ca Merge pull request #5060 from thinkyhead/rc_fix_ugly_code
Reduce, clean up MINTEMP / MAXTEMP test code
2016-10-22 11:27:30 -05:00
Josef Pavlik dca50737f5 fixed warning: ISO C++ forbids compound-literals 2016-10-22 11:23:16 -05:00
Josef Pavlik 0bd66807b2 fixed warning: extra ; 2016-10-22 11:12:29 -05:00
Josef Pavlik d35dc407a8 fixed warning: ISO C99 requires rest arguments to be used 2016-10-22 11:12:29 -05:00
Josef Pavlik c2b51af3ba fixed warning: ISO C does not permit named variadic macros 2016-10-22 11:12:29 -05:00
Scott Lahteine 0d3fc7dd89 Merge pull request #5059 from gcormier/fixbaby
Set defer delay back to false when exiting babystepping.
2016-10-22 10:59:17 -05:00
Scott Lahteine f888597197 Reduce, clean up code for mintemp/maxtemp tests 2016-10-22 10:31:03 -05:00
Scott Lahteine ad64723354 Move MAX_EXTRUDERS to pins.h 2016-10-22 10:07:51 -05:00
Scott Lahteine 5f5a55a0de Add a ZERO macro to clear arrays 2016-10-22 10:07:18 -05:00
Greg Cormier 0009725637 Set defer delay back to false when exiting babystepping. 2016-10-22 09:43:30 -04:00
Scott Lahteine 627f9d5285 Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
LIN_ADVANCE optimizations
2016-10-22 07:06:39 -05:00
Scott Lahteine 0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
Fix manual leveling coordinates
2016-10-22 06:31:02 -05:00
Scott Lahteine 14e60f0d3b Correct typo in configs
As pointed out by #5044
2016-10-22 05:56:32 -05:00
Scott Lahteine 1165e83263 MBL coordinates are logical 2016-10-22 05:55:44 -05:00
Scott Lahteine dbfabb4c0a Merge pull request #5043 from Kaibob2/patch-5
Correct grammar and translation in language_de.h
2016-10-22 05:52:54 -05:00
Scott Lahteine b19bba275f No LCD timeout during babystepping
As requested in #5031
2016-10-22 05:26:07 -05:00
Scott Lahteine b9109b2875 Improve LIN_ADVANCE commentary (all configs) 2016-10-22 05:03:09 -05:00
Sebastianv650 9818d97587 Fix Z-hops during retract/prime lead to blobs
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
2016-10-22 04:54:59 -05:00
Sebastianv650 599649e45d Add formula for LIN_ADVANCE_K
With this formula, a start value for K for further fine-calibration can be calculated.
2016-10-22 04:54:59 -05:00
Scott Lahteine be7d245eff Merge pull request #5008 from thinkyhead/test_endstop_hits
Save some PROGMEM in MBL G28
2016-10-22 03:35:52 -05:00
Scott Lahteine 7c0e52256d Merge pull request #5053 from thinkyhead/rc_fix_baud_config
Patch BAUDRATE line in configs
2016-10-22 03:27:45 -05:00
Scott Lahteine 2783dcb4cc Save some RAM in MBL's G29 2016-10-22 02:52:56 -05:00
Scott Lahteine 4f5a8c05d5 Tweaks to endstops macros 2016-10-22 02:52:56 -05:00
Scott Lahteine 083d41a2c2 Remove redundant estep rate code from LIN_ADVANCE
As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295
2016-10-22 02:19:14 -05:00
Scott Lahteine 4f6bfabaad Patch BAUDRATE line in configs 2016-10-22 00:48:52 -05:00
Kai 2bfedb74d5 Correct grammar and translation in language_de.h
Made Filament change Text sound like correct german.
2016-10-19 14:56:46 +02:00
esenapaj 1e1edeadd3 Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow)
・Add forgotten '\'
2016-10-18 18:07:20 +09:00
Scott Lahteine dc2cb8454c Revert acceleration limiting to avoid overflow 2016-10-17 17:08:41 -05:00
Scott Lahteine 6ae5cf17a9 Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-17 16:22:20 -05:00
Scott Lahteine f257c4bcae Merge pull request #5036 from thinkyhead/rc_dac_code_deps
Fix DAC current code
2016-10-17 16:19:00 -05:00
Scott Lahteine b80cc0cbb5 Fix DAC current code 2016-10-17 15:17:57 -05:00
esenapaj 385bd8a4a3 Fix freezing and MINTEMP Error with MAX31855 thermocouple 2016-10-16 07:33:14 +09:00
Scott Lahteine ca7275a67a Disable EXTRAPOLATE_FROM_EDGE by default 2016-10-14 14:44:28 -05:00
Scott Lahteine 0921c7da84 Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2
Adapt Jerk / Speed code from Prusa MK2
2016-10-12 06:38:50 -05:00
Scott Lahteine 4d89652bc2 Apply minor optimizations to planner.cpp 2016-10-12 04:42:15 -05:00
Scott Lahteine 1092319b19 Adapt speed/jerk code based on Prusa MK2 branch 2016-10-12 04:42:14 -05:00
Scott Lahteine 37643fef63 Merge pull request #4972 from bgort/platformio-improvements
Move platformio directories out of source tree
2016-10-12 03:42:33 -05:00
Scott Lahteine 8e1cc9332a Replace block flag bools with flag bits
…and apply const to some method parameters
2016-10-10 23:17:49 -05:00
Scott Lahteine d41f2bdbd8 Merge pull request #4991 from thinkyhead/rc_max31855_fix
Patches for Stepper DAC and MAX31855
2016-10-10 20:12:06 -05:00
Scott Lahteine e7cf566fc5 Do kinematic segments with buffer_line_kinematic
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
2016-10-10 17:14:03 -05:00
Scott Lahteine a10e81dc2a Minor cleanup of set_bed_leveling_enabled 2016-10-10 17:14:03 -05:00
Scott Lahteine 029824bc49 Patch ADJUST_DELTA macro for SCARA 2016-10-10 17:14:03 -05:00
Scott Lahteine 5ce5a9c822 Marlin: planner.h tweak 2016-10-10 17:14:03 -05:00
Scott Lahteine d963020532 Sort out some header dependencies 2016-10-10 17:14:03 -05:00
Scott Lahteine e17f9b8b99 DAC patches
As suggested by #4985
2016-10-10 14:08:04 -05:00
Scott Lahteine 2cb5df8a56 Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
2016-10-10 13:30:47 -05:00
Scott Lahteine b6221df3f3 Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range
Revert "Removal of PID functional range"
2016-10-10 13:29:54 -05:00
Scott Lahteine a07033a6c1 Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
2016-10-10 13:27:52 -05:00
Scott Lahteine f8199b2cc1 Merge pull request #4982 from thinkyhead/rc_abl_bugfix
Fix planner with kinematics, delta ABL
2016-10-10 13:24:22 -05:00
esenapaj f41c60d4a4 Follow-up the PR #4955, etc
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
2016-10-10 14:22:43 +09:00
esenapaj 00456b0cb3 Fix compilation errors 2016-10-10 14:22:43 +09:00
esenapaj cfb5c24bc9 Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
・Fix a comment about timer
2016-10-10 07:48:42 +09:00
Scott Lahteine 149b8d9e4b Handle MAX31855 error conditions 2016-10-09 17:12:50 -05:00
Scott Lahteine f4ec265363 Fix a typo 2016-10-09 16:45:29 -05:00
Scott Lahteine 4ec2d459e6 Fix mcp4728_setVref_all as followup to #4967 2016-10-09 16:45:00 -05:00
Scott Lahteine 1e551c0688 Revert "Squashed - Removal of PID functional range" 2016-10-09 16:27:45 -05:00
Scott Lahteine 4037df82b0 Merge pull request #4981 from esenapaj/Update-Japanese-language
Update Japanese translation, etc
2016-10-09 16:11:53 -05:00
Scott Lahteine e4e290d957 Make EXTRUDER_RUNOUT_PREVENT kinematic compatible 2016-10-09 15:58:33 -05:00
Scott Lahteine 847429eff4 Make tool_change kinematic compatible 2016-10-09 15:58:32 -05:00
Scott Lahteine a4a7ca10ca Make USE_DELTA_IK_INTERPOLATION compatible with ABL 2016-10-09 15:58:32 -05:00
Scott Lahteine c5cac486f5 Use a, b, c instead of lx, ly, lz 2016-10-09 14:34:24 -05:00
Josef Pavlik f8c2473a71 Improve planner kinematics, fix delta ABL 2016-10-09 13:32:46 -05:00
Scott Lahteine 48761f2021 Patch delta endstop adjustment config 2016-10-09 13:32:45 -05:00
Josef Pavlik 28d41b48e3 delta endstop adjustment configurable 2016-10-09 13:09:34 -05:00
Scott Lahteine ff6b23cb0f Fix an issue with shifted LCD lines 2016-10-09 13:00:00 -05:00
Scott Lahteine e4d2662d81 Use some macros in M48 2016-10-09 12:21:05 -05:00
Scott Lahteine 3752d9aca8 Fix timer comments 2016-10-09 12:11:00 -05:00
Sebastianv650 a448cedbc5 LIN_ADVANCE bug fix and optimization
.) long to int: Extruder stalls at 10kHz / 20kHz step limits with long.
.) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside.
.) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.
2016-10-09 11:55:02 -05:00
esenapaj b27080c1dd Update Japanese translation
・Add new translation
2016-10-10 01:52:51 +09:00
esenapaj 0780146034 Move DAC section from inside of the changing filament section 2016-10-10 01:17:46 +09:00
Brian 9c0404eae4 Move platformio directories out of source tree 2016-10-08 13:45:26 -04:00
Scott Lahteine a1b50f1102 Cleanup of code style 2016-10-07 15:57:24 -05:00
jaysonkelly 13c9dcc600 Add LCD menu for DAC 2016-10-07 15:13:03 -05:00
Scott Lahteine 00261cbfcb Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
Squashed - Removal of PID functional range
2016-10-07 15:07:55 -05:00
Scott Lahteine ee01def16d Merge pull request #4955 from thinkyhead/rc_debug_pins
PINS_DEBUGGING and M43: Read pin states
2016-10-07 14:47:34 -05:00
Scott Lahteine a0df34fd4c Add PINS_DEBUGGING advanced config option 2016-10-07 14:20:13 -05:00
Scott Lahteine e21bab5243 PINS_DEBUGGING and M43 Read Pins 2016-10-07 14:11:48 -05:00
Scott Lahteine 3c97fa6e29 Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
2016-10-07 00:33:42 -05:00
Scott Lahteine 48e63c4730 Comment some globals 2016-10-06 22:06:33 -05:00
Scott Lahteine 9a6c66602f Fix formatting of extrapolate debug output 2016-10-06 17:04:22 -05:00
Scott Lahteine cd77eb5c40 Clear grid for bilinear G29 2016-10-06 17:00:53 -05:00
Scott Lahteine 53a0856f5c Print Y as int in print_bed_level 2016-10-06 16:46:54 -05:00
esenapaj f8df88f271 Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr() 2016-10-07 02:01:29 +09:00
Brian 357854a7ef tweak variables; 2016-10-05 19:49:05 -04:00
Brian 48cf19151a Improve M48 output; Add min, max, range, etc. 2016-10-05 16:09:39 -04:00
Scott Lahteine c63cb45268 Fix thermal runaway timeout 2016-10-05 08:42:39 -05:00
Scott Lahteine e6164d254d Clean up GCode command short comments 2016-10-05 06:13:30 -05:00
Scott Lahteine 47bd142b29 Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin? 2016-10-05 06:13:30 -05:00
Scott Lahteine bd8520e61d Label analog pins in a similar way
Some other pins formatting also
2016-10-05 06:13:30 -05:00
Scott Lahteine 0c0deb5194 Common pin_is_protected function 2016-10-05 04:41:27 -05:00
Scott Lahteine 49d77720d5 More support for 4th extruder or heater 2016-10-05 04:40:22 -05:00
Scott Lahteine 46839c222a Comment and clean up some vars 2016-10-04 23:40:45 -05:00
Scott Lahteine 8910bb7c97 Fix buzzer conditional compile 2016-10-04 21:38:41 -05:00
Scott Lahteine de7e798e6f Replace single-char S_ECHOs with S_CHAR 2016-10-04 21:38:41 -05:00
Scott Lahteine 0e83f34174 Tweak debugging of probe_pt 2016-10-04 21:38:00 -05:00
Scott Lahteine cc02f6edf8 Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h
Small update of language_kana.h
2016-10-04 03:21:57 -05:00
Scott Lahteine ca26011e3c Merge pull request #4941 from MagoKimbra/rc_fix_M205
Add note for M205
2016-10-04 03:21:20 -05:00
Scott Lahteine 9485aa8f13 Include negative Z probe offset in clearance move 2016-10-03 16:18:04 -05:00
Scott Lahteine 5c1eb595e6 Fix for G2/G3 negative radius
As suggested in #4940
2016-10-03 14:48:44 -05:00
esenapaj f09ae96f28 Small update of language_kana.h 2016-10-03 23:41:39 +09:00
MagoKimbra 7b37539fe7 Add note for M205 2016-10-03 08:54:15 +02:00
Scott Lahteine d5f598cd82 Tweak probe debug, add newline 2016-10-02 17:35:40 -05:00
Scott Lahteine c592ccb6f5 Patch max_jerk[Z] menu item 2016-10-02 10:12:47 -05:00
Scott Lahteine d80a79eb77 Use right-shift instead of / 2, why not? 2016-10-02 07:01:40 -05:00
Rerouter 02fe9cf558 Removal of functional range constraint
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
2016-10-02 07:01:40 -05:00
Rerouter 5f5d87cad3 Update Configuration.h 2016-10-02 07:01:40 -05:00
Scott Lahteine 761593b74b Cleanup some vars, use of min/max 2016-10-02 06:34:56 -05:00
Scott Lahteine d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 06:34:56 -05:00
Scott Lahteine e7dc174f30 More detailed debugging of G28 delta 2016-10-02 02:18:57 -05:00
Scott Lahteine 473f4a17a8 Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
Pid unconstrained itemp
2016-10-01 06:58:07 -05:00
Scott Lahteine bad8899ebc Merge pull request #4900 from thinkyhead/rc_g38_changes
Cleanup of G38.2 / G38.3
2016-10-01 06:57:17 -05:00
Scott Lahteine 73ce3a61c7 Cleanup, comment zigzag 2016-10-01 05:21:52 -05:00
Scott Lahteine 0d538f3db6 Add to all configurations 2016-10-01 05:00:53 -05:00
Scott Lahteine 919fe3e4b8 Rename feature to G38_PROBE_TARGET 2016-10-01 05:00:53 -05:00
Scott Lahteine a2864ab7fe Patched up, cleaned up 2016-10-01 05:00:53 -05:00
Bob-the-Kuhn 2911aa7ffa code changes to implement G38 commands
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp

2) modified config files so I could test on my machine

Testing was done on an AzteegX3pro based machine.

The probe was hooked to the Z_MIN endstop.

My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.

Verified that a large file (without any G38 commands) executed the same
before and after the changes.

Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.

Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.

The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.

The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.

See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
2016-10-01 05:00:53 -05:00
Scott Lahteine 74d048e77e Merge pull request #4927 from thinkyhead/rc_bltouch_noraise
Don't check Z_MAX on raise when the probe pwns the pin
2016-10-01 04:52:56 -05:00
Scott Lahteine 4afa293289 Say "BLTOUCH" in machine info report 2016-09-30 17:13:27 -05:00
Scott Lahteine ed7d2694fc Don't check Z_MAX on raise when the probe pwns the pin 2016-09-30 16:41:30 -05:00
Scott Lahteine 3bbdd48a4d Merge pull request #4918 from thinkyhead/rc_abl_patchups
Fix up ABL - Add PROBE_Y_FIRST option. Arduino 1.6.8 required.
2016-09-29 15:29:01 -05:00
Scott Lahteine fffc9fefa8 Apply changes to all configs 2016-09-29 02:17:33 -05:00
Scott Lahteine 587cb6c283 K8400 has 1xXY an 2xZ endstop plugs 2016-09-29 02:07:22 -05:00
Scott Lahteine d234bc160e Require Arduino 1.6.8 to compile 2016-09-29 02:00:27 -05:00
Scott Lahteine 2d2c9bdf92 Add PROBE_Y_FIRST option for probe order 2016-09-29 02:00:27 -05:00
Scott Lahteine c8c57e59fc Patch the end of G29 to sync plan position 2016-09-29 02:00:27 -05:00
Scott Lahteine 81b8c9f8ec Add XY parameters to G29 for mesh dimensions 2016-09-29 02:00:27 -05:00
Scott Lahteine 56cf674150 M420 can now enable/disable ABL 2016-09-29 02:00:26 -05:00
Scott Lahteine 06790977c4 Use updated position methods 2016-09-29 01:31:05 -05:00
Scott Lahteine e8f2604a6f Patch print_bed_level numbering 2016-09-29 01:31:05 -05:00
Scott Lahteine d066610514 Patch up bilinear_z_offset 2016-09-29 01:31:05 -05:00
Scott Lahteine 850e38d013 G30 will only disable bed leveling 2016-09-29 01:31:04 -05:00
Scott Lahteine 510ef5d14a Standard function to turn bed leveling on/off 2016-09-29 01:27:37 -05:00
Scott Lahteine ecf7cdde65 Augment planner/stepper getters/setters 2016-09-29 01:27:37 -05:00
Scott Lahteine 2febd8ec82 Double-touch debugging 2016-09-29 01:27:37 -05:00
Scott Lahteine b331077c32 Use stepper.get_axis_position_degrees 2016-09-29 01:27:37 -05:00
Scott Lahteine 0d9efb24f3 Fix up bilinear_z_offset 2016-09-29 01:26:22 -05:00
jaysonkelly 3b3d282f8e Adjusted values for Rigidboard Configuration
Rigidboard differs a little in configuration from the PrinterBoardRevF we modeled the code after.
2016-09-28 14:14:04 -05:00
Scott Lahteine 850259bb25 Watch bed temp also for Control menu item 2016-09-28 14:14:04 -05:00
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
2016-09-28 14:14:04 -05:00
Rerouter 50e5ee4de4 Update Configuration.h 2016-09-28 17:38:09 +10:00
Rerouter 1a2f1d4974 Update temperature.cpp 2016-09-28 17:36:53 +10:00
Rerouter a765c98850 Removal of the constraints of the Iterm 2016-09-28 17:26:49 +10:00
Scott Lahteine 8b46eb3766 Fix bilinear interpolation 2016-09-27 03:18:49 -05:00
Scott Lahteine 5100bdac81 Improve Bilinear Grid
- Extrapolate properly for even numbered grid points
- Extrapolate using average, not median
- Improve bilinear grid report output
- Add debug output for bilinear extrapolation
- Add option to extrapolate from edge, not center
2016-09-27 00:03:19 -05:00
Scott Lahteine a3e91ec65e Add 'Q' option to G29 when debug leveling is on 2016-09-27 00:03:19 -05:00
Scott Lahteine 1fceda4fb0 Add leveling type and details to machine_info 2016-09-27 00:03:19 -05:00
Scott Lahteine e0e0166075 Fix auto bed leveling - turn on after successful G29 2016-09-27 00:03:19 -05:00
Scott Lahteine 18e40de39c Adjust final Z after bilinear G29 2016-09-26 00:22:22 -05:00
Scott Lahteine ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Scott Lahteine 9cebbabd05 Merge pull request #4893 from thinkyhead/rc_stat_led_check
Define status LED pins without condition
2016-09-25 18:50:47 -05:00
Scott Lahteine 5fff8d148b Clean up digital pots and microsteps 2016-09-25 11:16:22 -05:00
Scott Lahteine 570676d265 Include requirements in "Implemented Codes" 2016-09-25 07:50:33 -05:00
Scott Lahteine cb48292338 Use fastio for literal pins 2016-09-25 06:33:38 -05:00
Scott Lahteine 07703d2bd6 Use _PIN suffix on some pins 2016-09-25 06:33:38 -05:00
Scott Lahteine 203e519bf4 Sanity check for status LED pins 2016-09-25 06:33:38 -05:00
Scott Lahteine ba43277429 Always define status LED pins 2016-09-25 06:33:37 -05:00
Scott Lahteine ad691022d7 Fix up spacing in A4JP pins 2016-09-25 06:33:37 -05:00
Scott Lahteine fba0b67f7d Rename status led pins 2016-09-25 06:33:37 -05:00
Scott Lahteine 9d86c07702 Clean up some fastio.h spacing 2016-09-25 06:33:37 -05:00
Scott Lahteine ab84ed22ca No such thing as G6 and G7 pins 2016-09-25 05:28:22 -05:00
Scott Lahteine c2f13be750 Mightyboard Revision E 2016-09-25 05:28:04 -05:00
Scott Lahteine 041d127cd3 Match bltouch test in do_homing_move with new code 2016-09-24 23:58:08 -05:00
Scott Lahteine 16461900c2 Fix for HEATERS_PARALLEL 2016-09-24 05:34:40 -05:00
Scott Lahteine 1583d37edd Comment on M851 case 2016-09-24 05:34:36 -05:00
Scott Lahteine 076f3a8284 unsigned char => uint8_t 2016-09-24 05:23:40 -05:00
Scott Lahteine 8935bed594 MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R 2016-09-24 05:18:36 -05:00
Scott Lahteine 6cf0952bf9 Merge pull request #4887 from thinkyhead/rc_autumn_fixups
Improve MINIMUM_STEPPER_PULSE
2016-09-24 03:23:42 -05:00
Scott Lahteine 8061f1fac9 Merge pull request #4888 from thinkyhead/fix_warnings_etc
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:22:49 -05:00
esenapaj 7bdc58a818 Suppress warnings, fix nonlinear_z_offset 2016-09-24 03:06:08 -05:00
Scott Lahteine eabff30e75 Improve MINIMUM_STEPPER_PULSE 2016-09-24 02:23:43 -05:00
esenapaj 3ed8f8331c Update Japanese translation
・Add new translation
2016-09-24 09:24:38 +09:00
Scott Lahteine da1644313d Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-23 16:39:37 -05:00
Scott Lahteine 903b8bb60c No need for auto_bed_leveling_was_enabled 2016-09-23 16:38:22 -05:00
esenapaj ee60225c07 Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY) 2016-09-24 06:18:27 +09:00
Scott Lahteine 0951bffcc0 Sanity check homing bumps 2016-09-23 15:39:02 -05:00
Scott Lahteine a9a21db39f No homing bump if bump distance is 0 (or less) 2016-09-23 15:39:02 -05:00
Scott Lahteine 2b4da57ea7 Patch Z safe homing for probe Z homing 2016-09-23 15:39:02 -05:00
Scott Lahteine c6dd539c84 Print error for M42 bad pin 2016-09-23 15:39:02 -05:00
Scott Lahteine 8b399610fb Skip raw moves to current position 2016-09-23 15:39:02 -05:00
Scott Lahteine 22ece0081e Pass array pointer to unapply_leveling 2016-09-23 15:39:01 -05:00
Scott Lahteine cbc158eb62 Add a proper flag for ABL enabled 2016-09-23 15:39:01 -05:00
Scott Lahteine 666e944336 Init xProbe/yProbe for compiler 2016-09-23 15:39:01 -05:00
Scott Lahteine 2c52e6ecf4 Clean up G28 MBL code 2016-09-23 15:39:01 -05:00
Scott Lahteine 0bf1054bb2 Patch do_homing_move for SCARA 2016-09-23 15:39:00 -05:00
Scott Lahteine 6ad0da661c Report position in G92 2016-09-23 15:39:00 -05:00
Scott Lahteine 199a7b5dd5 Tweak SCARA debugging 2016-09-23 15:39:00 -05:00
Scott Lahteine 865ad25781 Fix prepare_kinematic_move_to precision 2016-09-23 15:39:00 -05:00
Scott Lahteine 85e607153b Improve kinematic optimization options 2016-09-23 03:03:15 -05:00
Scott Lahteine 2846531f0b const argument in do_homing_move 2016-09-23 03:03:15 -05:00
Scott Lahteine cc639d7d9c Less indentation in Stepper::isr 2016-09-23 03:03:14 -05:00
Scott Lahteine 7dec8071b2 Always synchronize in Stepper::set_position 2016-09-23 03:03:14 -05:00
Scott Lahteine c6142aa2a1 Minor cleanups in Marlin_main.cpp 2016-09-23 03:03:14 -05:00
Scott Lahteine 0427f3cc3b Use memcpy/memset in planner 2016-09-23 03:03:14 -05:00
Scott Lahteine 6b9bf8e8fe Add Planner::sync_from_steppers
Use to sync the planner after an interrupted move (when not overriding
the logical position).
2016-09-23 03:03:14 -05:00
Scott Lahteine be11a8a938 Fix debug in Planner::buffer_line 2016-09-23 03:03:13 -05:00
Scott Lahteine b211df818e Make movement functions more available 2016-09-23 03:03:13 -05:00
Scott Lahteine 6335acbf5c Patch bug in linear unapply_leveling 2016-09-23 03:03:13 -05:00
Scott Lahteine e8d5073a90 Use probe clearance for bump when homing Z with probe 2016-09-22 15:41:28 -05:00
Scott Lahteine dbe41245f1 Merge pull request #4821 from thinkyhead/rc_revert_to_raises
Z Raise/Clearance rather than Height
2016-09-22 15:30:07 -05:00
Scott Lahteine 747a2257dd Only deploy/stow BLTOUCH on downward move 2016-09-22 15:26:19 -05:00
Scott Lahteine e242946ac3 Patch G29 for linear leveling, reachable with probe 2016-09-22 15:26:19 -05:00
Scott Lahteine b800eb0fed Add probe option to position_is_reachable 2016-09-22 15:26:19 -05:00
Scott Lahteine fafafcf9d1 Use unapply_leveling in set_current_from_steppers_for_axis 2016-09-22 15:26:18 -05:00
Scott Lahteine e69d1e2879 Homing/probing feedrate, comments 2016-09-22 15:26:18 -05:00
Scott Lahteine 7d72ed688c Revert motor_current_setting to constexpr
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
2016-09-22 15:26:18 -05:00
Scott Lahteine 145d9005d1 Fix BLTOUCH string and SERVO_DELAY 2016-09-21 01:45:23 -05:00
Scott Lahteine 2b7cc27c37 Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method
Add support for G2/G3 with R parameter
2016-09-21 01:30:37 -05:00
Scott Lahteine e0e10e0e45 Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara
Kinematic and SCARA patches
2016-09-21 01:21:49 -05:00