Steffen Vogel
c7632be5cc
added high and low resolutions version of splash screen logo (saving code size)
2015-01-09 18:49:24 +01:00
Steffen Vogel
8f0dba7cbf
adding string for bouts splash string to config
2015-01-09 18:48:30 +01:00
Bo Herrmannsen
d94109e886
updated logo post and ver info
2015-01-09 15:51:15 +01:00
Bo Herrmannsen
cd33b5b062
changed logo and ver info
...
logo is now 110 pixels wide and starts 9 pixels in from top left corner and also 9 pixels down from same corner... this will give a 9 pixel border all way round
ver info is placed centered and there is a 9 pixel from bottom of display to ver info
2015-01-09 15:44:47 +01:00
Bo Herrmannsen
9b6c1cfda6
removed unneeded lines in welcome msg
2015-01-09 15:20:41 +01:00
Bo Herrmannsen
ffa09f86f4
moved ver info 5 spaces to the right
2015-01-09 13:31:23 +01:00
Alex Borro
2bbb68be8a
Fix calculation of BAL grid fitting into the bed
...
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.
So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
2015-01-09 10:17:33 -02:00
Bo Herrmannsen
590caafa2d
changed ver info
2015-01-09 13:17:08 +01:00
Bo Herrmannsen
3bb9b31515
changed boot logo a bit to test if fat wall goes away
2015-01-09 12:51:21 +01:00
Steffen Vogel
da192c521f
Merge pull request #1333 from andrewsil1/development
...
Fix grammar/typos in new Configuration.h option
2015-01-08 00:34:01 +01:00
Erik van der Zalm
3a30d45c2e
Revert "issue 968 for dev branch"
2015-01-07 23:40:17 +01:00
andrewsil1
269ec9f87f
Fix grammar/typos in new Configuration.h option
...
(For the SLOW_PWM_HEATERS option)
2015-01-07 12:41:09 -08:00
Steffen Vogel
8d7bfd03d8
moved/renamed documentation stuff to top-level directory
2015-01-07 15:33:50 +01:00
Bo Herrmannsen
3c9e6b7b62
added link for pic to hex converter
2015-01-07 14:28:51 +01:00
Bo Herrmannsen
0e760274bd
changed reprap logo to marlin logo
2015-01-07 14:27:51 +01:00
Bo Herrmannsen
b291a422e9
added square png version of logo
...
406*406 pixels
2015-01-07 13:00:37 +01:00
Luis E Alvarado
7ae548cf34
Update Marlin Firmware URL
2015-01-07 05:26:47 -06:00
Erik van der Zalm
8f9067faa6
Added marlin logos. (Designed by Ahmet Cem TURAN)
2015-01-07 12:21:16 +01:00
Bo Herrmannsen
addf52fd4a
Merge pull request #1328 from DinoMesina/development
...
Some corrections and new features
2015-01-06 23:52:32 +01:00
Dino Del Favero
5cfe13f240
Correct some mistakes
2015-01-06 21:55:08 +01:00
Dino Del Favero
c7e2d73039
Merge branch 'development'
...
ok
2015-01-06 20:18:03 +01:00
Alex Borro
422a958a34
Fix CoreXY speed calculation
...
For cartesian bots, the X_AXIS is the real X movement and same for
Y_AXIS.
But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors
(that should be named to A_AXIS
and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning
the real displacement of the Head.
Having the real displacement of the head, we can calculate the total
movement length and apply the desired speed.
2015-01-06 16:39:48 -02:00
Dino Del Favero
038fccd7a1
I have added some code in the "temperature.cpp" for have the possibility of control the time of the states with the heater drived by relays, with this feature now it is possible use PID function in conjunction with relay to control the temperature. I have made some tests and the temperature stay always in the range of +-1°C from the setted temp.
...
There is the possibility of turn on this features adding "#define SLOW_PWM_HEATERS" in Configuration.h
2015-01-06 18:32:17 +01:00
DinoMesina
6730335657
Update Configuration.h
2015-01-06 18:06:02 +01:00
Bo Herrmannsen
4ffecdbf7d
Merge pull request #1313 from wgm4321/Development
...
Re-enable filament menu with recalc fix when enabling/disabling mm3
2015-01-06 13:47:49 +01:00
Steffen Vogel
672f764b4d
replaced ASCII GPL v3 license by markdown version
...
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
2015-01-06 11:49:05 +01:00
Steffen Vogel
f25e793cff
rename stepper lookup table scipt to be consistent with termistor lookup table script
2015-01-06 10:30:20 +01:00
Steffen Vogel
df17a6a1b4
fix #1305 by proposed workaround (thanks gaby64)
2015-01-06 10:29:26 +01:00
Steffen Vogel
f7e65935fb
make use of power operator
2015-01-06 10:28:43 +01:00
Steffen Vogel
4e02aff9b5
automatically determine min/max temp for terminator
2015-01-06 10:28:19 +01:00
Steffen Vogel
81363bc441
more cleanups
2015-01-06 10:27:40 +01:00
Steffen Vogel
95f4a55820
refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients
2015-01-06 08:24:59 +01:00
Steffen Vogel
21205cc3d8
more cleanups in the termistorTable generation script
2015-01-06 08:23:51 +01:00
Steffen Vogel
fb0996b5db
improved output aligment and precision
2015-01-06 08:20:52 +01:00
Steffen Vogel
538231edfd
cosmetic whitespace cleanup and comments added/updated
2015-01-06 08:20:20 +01:00
wgm4321
067b509479
Re-enable filament menu with recalc fix when enabling/disabling mm3
2015-01-05 22:29:29 -05:00
wgm4321
a19f2f8ae7
Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled
2015-01-04 22:15:16 -05:00
wgm4321
f24dda9700
Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3"
...
This reverts commit dd7e4ee97f
2015-01-04 22:08:41 -05:00
wgm4321
ec4681ab6b
Revert "Add "Detailed Z Probe" menu item with ABL is defined."
...
This reverts commit 2b9722f387
2015-01-04 21:53:37 -05:00
wgm4321
dd7e4ee97f
Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3
2015-01-04 21:44:55 -05:00
wgm4321
2b9722f387
Add "Detailed Z Probe" menu item with ABL is defined.
2015-01-04 21:42:16 -05:00
Dan Royer
9472bbe51d
issue 968 for dev branch
...
try, try again.
If 'OK' is garbled on sending PC won't receive it. Both machines will
wait on each other forever. This resends OK if nothing is heard from PC
for a while to avoid this bad case.
2015-01-04 12:17:46 -08:00
alexborro
d2b6e62996
Merge pull request #1309 from philfifi/fix_temp_runaway
...
temp runaway: proper cast to prevent any overflow.
2015-01-04 12:55:58 -02:00
Philippe L
30248214c7
temp runaway: proper cast to prevent any overflow.
2015-01-04 14:23:31 +01:00
Bo Herrmannsen
c5f138ea07
Merge pull request #1291 from alhirzel/Development
...
Define analogInputToDigitalPin only if needed
2015-01-04 12:53:41 +01:00
Bo Herrmannsen
3d9f4ac757
Merge pull request #1303 from wgm4321/Development
...
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
2015-01-04 01:29:26 +01:00
wgm4321
04fb34c7ff
Add English defines for filament menu to non-English to prevent compile errors until translated
2015-01-03 17:28:05 -05:00
wgm4321
f8aa5ff771
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined
2015-01-03 17:10:13 -05:00
Alexander Hirzel
f36fd3ddec
Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development
2015-01-02 12:39:39 -05:00
Scott Lahteine
b5e50cdd4e
Move scripts and documentation to subfolders
2015-01-02 08:53:09 -08:00
