Commit graph

1321 commits

Author SHA1 Message Date
Scott Lahteine c9486ebb85 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:12:33 -08:00
Scott Lahteine b6ffea612a Expand on More RAM concept, address minor bugs 2014-12-13 06:10:44 -08:00
Scott Lahteine 8196b36ad9 SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:07:52 -08:00
Scott Lahteine cf749dbeda Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:03:39 -08:00
Scott Lahteine ae081d0fe0 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
Scott Lahteine 785143a013 Expand on More RAM concept, address minor bugs 2014-12-13 06:03:39 -08:00
Scott Lahteine 0cbbba08bd SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
Bo Herrmannsen edfcf3b527 Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
Bo Herrmannsen c429a4b3ec Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
nothinman 1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
Scott Lahteine 7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
nothinman 5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
elgambitero 433ac29d31 Updated a bit of spanish language 2014-11-27 22:02:49 +01:00
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine d12b24758a Clear LCD to welcome_msg if not printing
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
Scott Lahteine 3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine 92e21d3ee2 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Jonas 0d97dec434 Adaption of LCD info screen
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
2014-11-12 17:10:48 +01:00
Filip Mulier 5c8107bcdd Commented out FILAMENT_SENSOR #define
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default.  Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
David 377dfb182f Updated example configurations for Delta printers 2014-11-02 21:04:54 +00:00
Erik van der Zalm 724197454c Merge pull request #1104 from ch100/Marlin_v1
Fixed typo.
2014-10-11 23:10:00 +02:00
Erik van der Zalm 058e446531 Merge pull request #1037 from filipmu/Filament-Sensor
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
Christian Inci 110c5dcf23 Fixed typo.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2014-10-11 00:25:36 +02:00
Matt Stultz ca30aee903 Fix "add_homeing" to "add_homing" to match changes 2014-10-07 00:16:27 -04:00
Erik van der Zalm 0733825fb1 Merge pull request #1099 from Fourmi/Marlin_v1
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
Fourmi af3e4d7510 Update line 627 ,wrong number on thermistortables
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
Erik van der Zalm aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
Erik van der Zalm b360306881 Merge pull request #1073 from WingTangWong/wing-fix-float-delta
Wing fix float delta
2014-10-06 13:41:01 +02:00
Erik van der Zalm ce85515428 Merge pull request #1082 from Fourmi/Marlin_v1
Add thermistor table
2014-10-06 13:39:36 +02:00
Erik van der Zalm 764921bdbf Merge pull request #1091 from Aldert/patch-1
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
Erik van der Zalm c40c7b589b Merge pull request #1095 from thinkyhead/codeclean
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
Erik van der Zalm 0f2e0525df Merge pull request #1096 from thinkyhead/set-home
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
Erik van der Zalm 5ae02a361b Merge pull request #1097 from thinkyhead/round-up-xyz
Adjust the Z display to hide float rounding errors
2014-10-06 13:35:00 +02:00
Matthew Schick fb34265d75 Make hotend optional when compiling with lcd support
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-10-06 00:19:07 -04:00
Scott Lahteine 6e343ef2f0 Adjust the Z display to hide float rounding errors 2014-10-05 18:34:54 -07:00
Scott Lahteine 2f6c57eadc Proposed feature: Set Home Offsets
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
Scott Lahteine f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Aldert d1e4237e1d Update motion_control.cpp
G03 Full circle did not work (G02 is working correct)
2014-10-04 09:24:09 +02:00
Fourmi a664763e6f Update thermistortables.h
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"

Thx
2014-09-27 09:05:10 +02:00
Fourmi b5dc228a7a Update configuration.h
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
2014-09-27 09:02:58 +02:00
Fourmi 3cbb2f56c6 Update configuration.h
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?

Thx
2014-09-26 22:01:06 +02:00
Fourmi c35736a140 Update thermistortables.h
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
galexander1 cb4a6dd2dc Merge pull request #1065 from oliasmage/Marlin_v1
Corrected retract() call for use of auto probe without sled enabled.
2014-09-19 15:12:09 -04:00
Bracken Dawson 01e9b536cb Fix build for non-sled bed auto levelling
This function should only be used with sled, not all bed auto
levelling.
2014-09-19 19:42:32 +01:00
Wing Tang Wong 58eabd21fb Added ifndef 2014-09-16 14:31:58 -07:00
Wing Tang Wong 88d12a762a Added #ifndef DELTA wrapper to float delta 2014-09-16 14:29:44 -07:00
alexborro bf0ecedf60 Merge pull request #1051 from fsantini/EZ_fix935
Fix issue 935: error in matrix calculation
2014-09-14 21:49:15 -03:00
Javi 40ba644bb4 Added profile for RAMPS with 2 extruders and 1 fan.
modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h
2014-09-06 02:53:36 +02:00
Charles Bell 3b8216bdd1 Corrected #endif and ifdef for Z_PROBE_SLED code. 2014-09-04 16:40:22 -04:00
Charles Bell 37799f70ba Corrected retract() call for use of auto probe without sled enabled. 2014-09-04 14:36:39 -04:00