zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
4020 commits 1 branch 0 tags 156 MiB
Commit graph

3216 commits

Author SHA1 Message Date
RicardoGA e09ff79635 Update pins_RAMPS_13.h (PR#64) 
Now all ramps configuration can enable Filament sensor not only EEB
 2015-08-10 05:53:01 -05:00
Fourmi e6aed7bb4e Update thermistortables for Hisens Thermistor (PR#2588) 2015-08-09 18:11:14 -05:00
Richard Wackerbarth 9d8cc24abf Continue from the line following the M999 (PR#60) 
If the printer is going to accept the M999,
then it should continue from that line number.
 2015-08-08 08:08:02 -05:00
wurstnase f3ab1dba54 Z babystepping for coreXY (PR#47) 
only X and Y were not implemented
 2015-08-04 20:10:09 -05:00
Richard Wackerbarth 35afea1c0e Restore test 
PR#2572 Changed this because of faulty Boolean Logic

NOT(A OR (NOT B) OR (NOT C)) !=

(NOT A) AND ((NOT B) OR C))


Besides, the compiler should be smart enough to
optimize this without help from the programmer
 2015-08-04 15:22:56 -05:00
Scott Lahteine 6af75f4b5d Squish down deprecated tests in sanity check 2015-08-03 16:04:48 -05:00
Scott Lahteine edeb58288e Use PIN_EXISTS in sanity check 2015-08-03 16:04:48 -05:00
Scott Lahteine c30b7693e0 Clean up RUMBA pins conditions 2015-08-03 16:04:48 -05:00
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays 
The long descriptor will still be available in M115
 2015-08-03 08:21:09 -05:00
Richard Wackerbarth cd7828a928 This will be the 1.1.0 Release rather than 1.0.3 2015-08-03 08:08:38 -05:00
Richard Wackerbarth 4e2f5618c1 Pick up Default_version when needed 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 5a11d32a85 Move deprecation test to SanityCheck.h 2015-08-03 08:08:37 -05:00
Richard Wackerbarth 7bb7a52940 Bring config up-to-date 2015-08-03 07:35:33 -05:00
AnHardt 244ea2014a Boot-screen for text-displays improvements 
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
 2015-08-03 07:13:00 -05:00
AnHardt 80f2a20842 Enable bootscreen in all Configurations 2015-08-03 07:13:00 -05:00
AnHardt 2684d061ed Scroll too long strings on bootscreen 2015-08-03 07:13:00 -05:00
AnHardt 4f46df5dab Make bootscreen configurable for the graphic displays 
Saves about 473 byte of progmem and 28 bytes of RAM.
 2015-08-03 07:13:00 -05:00
AnHardt 09571b7753 Boot-screen for the character displays 
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
 2015-08-03 07:13:00 -05:00
Richard Wackerbarth 866efc14fe Add Danish translations 2015-08-03 07:06:17 -05:00
Scott Lahteine 267f3479d7 Adjust spacing in pins_RAMPS_13.h 2015-08-02 23:26:58 -05:00
Scott Lahteine 56702e7bb9 Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
Richard Wackerbarth 4b9d5cd352 Use lowercase names for serial instances 2015-08-02 23:01:39 -05:00
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH 
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
 2015-08-02 22:56:50 -05:00
Scott Lahteine 68055a5959 Include RIGIDBOT_PANEL in Conditionals 2015-08-02 22:26:41 -05:00
George Djabarov f8ed3a835d Added comment with the RigidBot Big bed size 2015-08-02 22:13:37 -05:00
George Djabarov 7deae6b6be Updated RigidBot example configuration 
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
 2015-08-02 22:13:37 -05:00
Scott Lahteine 5418faa1f9 Add sanity checks for old names 2015-08-02 22:09:08 -05:00
Scott Lahteine f03e063750 Rename BEEPER to BEEPER_PIN 
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
 2015-08-02 22:09:08 -05:00
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs 
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
 2015-08-02 21:59:41 -05:00
Scott Lahteine 496fc28dc3 Tweaks to pins comments 2015-08-02 21:34:13 -05:00
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN 
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
 2015-08-02 21:34:13 -05:00
Scott Lahteine 0f5ada8cbd Group the fail case in one negation (PR#2572) 2015-08-01 18:55:50 -05:00
AnHardt 7ddf1cda1d Improve condition for SERVO_LEVELING (PR#2570) 2015-07-31 22:41:34 -05:00
Richard Wackerbarth f32048b8f5 In for a penny, in for a pound 2015-07-31 17:13:53 -05:00
Scott Lahteine e944f960de Add a sanity check for old name "BEEPER" 2015-07-31 17:13:53 -05:00
Scott Lahteine 8ebf0b92be Spacing adjustments in some pins files 2015-07-31 17:13:53 -05:00
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN 
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
 2015-07-31 17:13:53 -05:00
Richard Wackerbarth b217474eab Compiler Complaints about concatenated tokens (PR#2566) 2015-07-31 17:08:44 -05:00
Scott Lahteine 2460f82d8b Make proper distinction between BEEPER and HAS_BUZZER 2015-07-31 01:24:33 -05:00
Scott Lahteine 58cfcd4239 Overridable Options - Part 5 
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
 2015-07-31 01:24:20 -05:00
Scott Lahteine 5e834352a9 Overridable Options - Part 11 (PR#2563) 
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
 2015-07-31 01:07:04 -05:00
Scott Lahteine bf6eb93c61 Overridable Options - Part 10 (PR#2562) 
Apply `ENABLED` / `DISABLED` macros to planner files.
 2015-07-31 01:06:29 -05:00
Scott Lahteine 51e89a269c Overridable Options - Part 9 (PR#2561) 
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
 2015-07-31 01:05:55 -05:00
Scott Lahteine c35fb88094 Overridable Options - Part 8 (PR#2560) 
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
 2015-07-31 01:05:22 -05:00
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559) 
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
 2015-07-31 01:04:37 -05:00
Scott Lahteine b4abb0ae7f Apply ENABLED / DISABLED to Marlin core files (PR#2558) 2015-07-31 01:03:58 -05:00
Scott Lahteine c0d7ea3e7e Overridable Options - Part 4 (PR#2556) 
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
 2015-07-31 00:44:53 -05:00
Scott Lahteine 4b40964064 Overridable Options - Part 3 (PR#2555) 
Apply `ENABLED` / `DISABLED` macros to language-related files.
 2015-07-31 00:19:13 -05:00
Scott Lahteine 32683b282b Include configurator copies of configs 2015-07-31 00:03:36 -05:00
Scott Lahteine 37d1879386 Apply overridables to Configuration files 2015-07-31 00:03:36 -05:00
Scott Lahteine 9d151bb61b servo_endstop_angles -> servo_endstop_angle 2015-07-30 23:35:57 -05:00
Scott Lahteine 9334479aeb Minor cleanup of Conditionals.h 2015-07-30 23:35:57 -05:00
Scott Lahteine 1f63293624 servo_endstops -> servo_endstop_id 2015-07-30 23:35:57 -05:00
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 2015-07-30 23:35:57 -05:00
Scott Lahteine ed4a6371ad Add HAS_SERVO_ENDSTOPS to simplify conditonals 2015-07-30 23:35:57 -05:00
Scott Lahteine 70be61d416 Reset filament_size with a loop 2015-07-30 23:31:58 -05:00
Scott Lahteine ae9274be05 Fix minor compiler warnings in for loops 2015-07-30 23:31:58 -05:00
Scott Lahteine c7c8cfed6f Complete M200 output with M503 
- The contents of EEPROM include filament diameters even with
Volumetric disabled. This change makes `M503` display the full
volumetric settings so that playing back the output of `M503 S0` will
fully restore them.
 2015-07-30 23:31:58 -05:00
Scott Lahteine 4a58e447a1 Add array size to servo_endstop_angles (PR#2553) 2015-07-30 23:27:38 -05:00
Andrew Lenharth a0ae9e30df don't pass integer by reference, inefficient. (PR#2547) 2015-07-30 17:51:12 -05:00
AnHardt d03f037a92 Get rid of malloc() and free() (PR#2549) 
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().

Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.

Should use exactly the same amount of stack as it did before on the heap.
 2015-07-30 17:50:31 -05:00
Scott Lahteine 3b2b2313ff Combine if block related to SERVO_ENDSTOPS 2015-07-30 16:39:05 -05:00
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 2015-07-30 16:38:56 -05:00
Richard Wackerbarth 525d0dc239 Configurator is out-of-date AGAIN (PR#2550) 2015-07-30 16:36:01 -05:00
Richard Marko dd22cbbfb8 makefile: add buzzer.cpp (PR#2479) 2015-07-30 07:56:44 -05:00
Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 2015-07-30 07:55:29 -05:00
Richard Wackerbarth ae00fad75b Rename as M100 2015-07-27 20:31:59 -05:00
Richard Wackerbarth a401d738df There is an echo in here 2015-07-27 20:31:59 -05:00
Richard Wackerbarth ed7d45e8f5 Memory watcher 2015-07-27 20:31:59 -05:00
AnHardt d17f7ebc8a Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) 
instead of 1000.  Else we get errors with times over 32 seconds.
 2015-07-27 20:30:53 -05:00
Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 2015-07-27 20:24:33 -05:00
Scott Lahteine 81bba7ed88 More sanity checking for extruder requirements (PR#2531) 2015-07-27 10:14:43 -05:00
AnHardt 87a97f3724 Fix conditions for display strings 2015-07-26 20:41:21 -05:00
AnHardt aaccea0260 Shift some display only strings from language.h to lenguage_en.h 
and translate them to German.
 2015-07-26 20:41:15 -05:00
Scott Lahteine e4c01f1c7e Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507) 2015-07-26 20:40:27 -05:00
Scott Lahteine ab6f1fdf8b Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) 
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
 2015-07-26 20:36:37 -05:00
Richard Marko 1183c10a2e makefile: drop -q -q (much quiet) from avrdude flags 
Annoying when trying to figure out if uploading
actually does something.
 2015-07-26 20:31:31 -05:00
Richard Marko 0e064357f4 makefile: use /etc/avrdude/avrdude.conf on linux 
No need to look for arduino specific avrdude configuration
as distributions ship their own avrdude.conf file that
is compatible with arduino.
 2015-07-26 20:31:31 -05:00
Scott Lahteine bcb7d5a149 Improve sanitycheck for TEMP_SENSOR_1 2015-07-25 21:17:36 -05:00
Scott Lahteine 5b24f59401 Add sanity checks for temp sensors 2015-07-25 21:17:36 -05:00
AnHardt fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513) 
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
 2015-07-24 22:10:04 -05:00
Scott Lahteine e2957df05c Shorthand for do_blocking_move_to 2015-07-24 22:07:41 -05:00
Scott Lahteine 819c5b9b50 Adjust comment on Z adjustment 2015-07-24 22:07:41 -05:00
Scott Lahteine 5a7356b6fc Patch for G29 final Z position 
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
 2015-07-24 22:07:41 -05:00
AnHardt 088e09e052 Add forgotten Marlin_main.cpp 2015-07-24 22:04:49 -05:00
AnHardt 8b876241bd Some more servo code tweaks 
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
 2015-07-24 22:04:49 -05:00
Scott Lahteine b116c096bd Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) 
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
 2015-07-24 22:00:25 -05:00
Scott Lahteine f7e7862588 Better Sanguinololu & Graphical Controller (PR#2504) 
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
 2015-07-23 23:47:07 -05:00
Scott Lahteine a1154d4a20 Enable Y and sanity-check CoreXZ (PR#2509) 2015-07-23 23:46:27 -05:00
Scott Lahteine 932f1c109e Move servos to the top in pins_MEGACONTROLLER.h 2015-07-23 22:51:41 -05:00
Scott Lahteine 90f8ddfc1e Apply MINIPANEL to other configs 2015-07-23 22:51:41 -05:00
AndySze 00dbf69b6d add MINIPANEL defines 2015-07-23 22:51:40 -05:00
AndySze 8ac5e56934 fixed some format problems and cleaned code 2015-07-23 22:51:40 -05:00
AndySze eef595aa64 add makerlab mega controller pin configs 2015-07-23 22:51:40 -05:00
AnHardt 4e14e152fa Add Travis tests for CORXY and COREXZ 2015-07-23 19:52:48 -05:00
AnHardt 27d7d2ccab Correct bracketing for COREXY-XZ 2015-07-23 19:52:21 -05:00
Scott Lahteine 469843427d Reduce code in gcode_M81 (PR#2497) 2015-07-23 08:14:00 -05:00
Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494) 
The compiler may be able to optimize if it knows an array won’t be
changing.
 2015-07-22 21:37:37 -05:00
Scott Lahteine 278aa15301 Add COUNT macro and apply 2015-07-22 18:16:05 -05:00
Scott Lahteine d85861d296 Move macros, add ENABLED/DISABLED, add includes 2015-07-22 18:16:05 -05:00
Scott Lahteine 17960fd2b0 Neaten up pins_MEGATRONICS.h (PR#2493) 2015-07-22 17:23:22 -05:00
Scott Lahteine aac2b9aa9d Reduce code in gcode_M84 (PR#2492) 
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
 2015-07-22 17:22:01 -05:00
Scott Lahteine 4971fa73f9 Add a sanitycheck error for old servo settings (PR#2491) 
- Documentation solution for #2476
 2015-07-22 16:35:10 -05:00
Scott Lahteine 96ace72ddc Servos attach/detach based only on servo config 
Assuming #2470 fixed up the main issue.
 2015-07-22 16:34:26 -05:00
Richard Wackerbarth b80a6a8d31 Correct Kossel Pro Configuration_adv (PR#2473) 2015-07-22 16:32:08 -05:00
Scott Lahteine 000a6fce46 Extract update_endstops from stepper ISR (PR#2474) 2015-07-19 18:33:18 -05:00
Scott Lahteine e83eac312e Move plan_arc next to prepare_move 2015-07-19 16:18:46 -05:00
Scott Lahteine 5c5936508d G2/G3 Arcs for Delta 
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
 2015-07-19 16:18:46 -05:00
Scott Lahteine 9f53e2f0c9 Implement COREXZ in stepper.cpp and planner.cpp 2015-07-19 16:17:03 -05:00
Scott Lahteine fa00e1d97f Explode conditions common to corexy and cartesian 2015-07-19 16:17:03 -05:00
Scott Lahteine c7dd5527b4 Add a C_AXIS and Z_HEAD to support COREXZ 2015-07-19 16:17:03 -05:00
Scott Lahteine 129f986ccf Add COREXZ option to configurations 2015-07-19 16:17:03 -05:00
Scott Lahteine 69b0490b77 Show minimal preheat options in menus (PR#2471) 2015-07-19 16:14:59 -05:00
Scott Lahteine eacfe132aa Change the name of servos[] and servo_t 2015-07-19 11:35:48 -07:00
Scott Lahteine 3b23ccd366 Patch servos code for move 
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
 2015-07-19 11:24:23 -07:00
Richard Wackerbarth 54ddc1d417 Simplify DRY RUN (PR#2358) 
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.

Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
 2015-07-19 10:15:53 -05:00
Scott Lahteine 944090c19c Optimize lsDive logic 2015-07-19 10:13:40 -05:00
Scott Lahteine 417706e578 Include space for the terminating nul in lsDive 2015-07-19 10:13:39 -05:00
Scott Lahteine f3c1a6b19c Reduce lsDive stack usage to the minimum 2015-07-19 10:13:39 -05:00
Patrick Bogen fba4e6241b Specify print format for reporting invalid tmp_extruder (PR#2465) 2015-07-18 16:40:01 -05:00
AnHardt d15d869267 Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) 
to make clear - it's not a question but an order.
 2015-07-18 10:27:21 -05:00
Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461) 2015-07-16 20:02:44 -05:00
Scott Lahteine 0f1df62389 Fixup comments in code_seen 2015-07-16 16:40:52 -05:00
Scott Lahteine 2945eb6650 Call code_seen only once per parameter 2015-07-16 16:40:52 -05:00
Scott Lahteine b742af2e2a Move Y_STOP_PIN for Printrboard with SD (PR#2420) 2015-07-16 16:39:55 -05:00
Scott Lahteine baa9199973 Define extern delta only for delta 2015-07-16 16:36:30 -05:00
Scott Lahteine 77e80ef367 Require extruders for thermal code 2015-07-16 16:36:30 -05:00
Scott Lahteine 3bde4f4855 Require temp sensor for bed thermal protection 2015-07-16 16:36:30 -05:00
Scott Lahteine 82a3ed2f9a Cleanup and dev notes in Marlin.h 2015-07-16 16:36:30 -05:00
Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457) 2015-07-16 16:35:13 -05:00
Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451) 2015-07-16 10:25:54 -05:00
Scott Lahteine 552a327df8 Fix lsDive filename stack overrun (PR#2449) 2015-07-16 10:23:56 -05:00
AnHardt a6628f12cc Eliminate the further use of the pin-parameter 2015-07-15 20:50:58 -05:00
AnHardt 8504992e9f Remove the additional pin variable in Servo.cpp 
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
 2015-07-15 20:50:58 -05:00
AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3 
and cleaned out some tabs.

Everything else is a rebased PR#2017 as proposed by @CptanPanic
 2015-07-15 19:51:40 -05:00
brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map. 2015-07-15 19:51:40 -05:00
Scott Lahteine de25a48dec Remove PID examples from preconfigured configs 2015-07-15 19:13:53 -05:00
Scott Lahteine 7456710a1f Update configs formatting 2015-07-15 19:13:47 -05:00
Scott Lahteine 391386dd94 Update configs for new servo deactivation 2015-07-15 19:13:40 -05:00
AnHardt 5243d8b523 Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default 2015-07-15 17:39:43 -05:00
AnHardt 49609f6c14 Activate the new servo.move() function 
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
 2015-07-15 17:39:43 -05:00
AnHardt 40b6edcad7 Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h 
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
 2015-07-15 17:39:43 -05:00
AnHardt 2ddb2a2be9 Add Servo::move() to servo.cpp 
move(pin, angel) - Sequence of attach(pin), write(angel),
                   if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.

As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()

Here a function to handle the complete sequence.
 2015-07-15 17:39:43 -05:00
mkile 8a01e5fb7a Update Russian translation (PR#2443) 
Slightly updated translation.
 2015-07-15 10:35:36 -05:00
Richard Wackerbarth e83575537a Compiler defines USBCON for USB devices (PR#2433) 2015-07-15 10:32:11 -05:00
ayberkozgur 7268d46508 Always calculate extruder temperature PID d term (PR#2432) 2015-07-13 13:22:26 -05:00
Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411) 2015-07-12 22:15:54 -05:00
Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402) 2015-07-12 22:14:25 -05:00
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support 2015-07-11 16:04:11 -05:00
Scott Lahteine a0351bdb73 Remove STEPPER_RESET_FIX option 2015-07-11 16:04:11 -05:00
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409) 2015-07-10 09:03:07 -05:00
Scott Lahteine 8e61314323 Use RIGIDBOT_PANEL for consistency with online docs 2015-07-09 11:36:46 -05:00
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h 2015-07-09 11:36:46 -05:00
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h 2015-07-09 11:36:46 -05:00
Scott Lahteine f068e46661 RigidBoard include for pins.h 2015-07-09 11:36:46 -05:00
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL 2015-07-09 11:36:46 -05:00
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 2015-07-09 05:33:17 -05:00
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 2015-07-07 06:59:10 -05:00
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros 2015-07-07 06:59:10 -05:00
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T 2015-07-07 06:59:10 -05:00
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 2015-07-07 06:59:10 -05:00
Scott Lahteine 15190d40df Add extra EOL after M111 2015-07-07 06:59:10 -05:00
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390) 
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
 2015-07-07 06:58:01 -05:00
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391) 
Sign flipped with #2167.
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
 2015-07-07 06:55:33 -05:00
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374) 
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
 2015-07-04 05:55:25 -05:00
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375) 2015-07-04 05:53:22 -05:00
AnHardt 23c8c5348f Z-height fix V2b (PR#2351) 
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
 2015-07-02 20:30:40 -05:00
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361) 
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
 2015-07-02 20:28:07 -05:00
Scott Lahteine 42465ee444 Cleanup of comments & spacing 2015-06-28 08:20:28 -05:00
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 2015-06-28 08:20:19 -05:00
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337) 2015-06-27 06:10:19 -05:00
AnHardt 36746143a1 Correct output of M48 (PR#2336) 
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
 2015-06-27 06:08:40 -05:00
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 2015-06-26 18:13:54 -05:00
Scott Lahteine aaad65ff5d Include a comment documenting M110 2015-06-26 18:13:54 -05:00
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 2015-06-26 18:13:54 -05:00
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 2015-06-26 18:13:53 -05:00
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332) 2015-06-26 07:10:22 -05:00
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 2015-06-25 20:45:03 -05:00
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 2015-06-25 20:45:03 -05:00
Scott Lahteine 97ec224d72 Replace target with destination in M600 2015-06-25 20:45:03 -05:00
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 2015-06-25 20:45:03 -05:00
Jaime van Kessel b8b5762e55 Update Ultimaker URL 2015-06-25 09:12:44 -05:00
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate. 2015-06-25 09:12:44 -05:00
Scott Lahteine 149c474e55 Updated Russian language (PR#2325) 
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
 2015-06-22 23:07:19 -04:00
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) 
at least the lcd independent part from Marlin_main.cpp.
 2015-06-22 22:31:48 -04:00
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301) 
to MELZI_MAKR3D.

Fix for #2288
As the normal MELZI also can have a 1284.
 2015-06-22 22:30:07 -04:00
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273) 
ZigZag has been disabled by fault due to do_topography_map
 2015-06-15 20:26:25 -05:00
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282) 2015-06-15 20:22:44 -05:00
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 2015-06-15 20:20:32 -05:00
Scott Lahteine 98c9111a7d Update delta configs with latest settings 2015-06-15 20:20:32 -05:00
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs 2015-06-15 20:20:31 -05:00
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files 2015-06-15 20:20:31 -05:00
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting 2015-06-15 20:20:31 -05:00
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals 2015-06-15 20:20:31 -05:00
Scott Lahteine a274769f4f Clean up spacing and comments 
Also clean up some trailing spaces in a few other sources
 2015-06-15 20:20:31 -05:00
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 2015-06-15 20:20:31 -05:00
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists 2015-06-15 20:20:31 -05:00
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 2015-06-15 20:20:31 -05:00
Scott Lahteine 318318b02f Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
Scott Lahteine 346c8b339b Remove a test from pins_RAMPS_13.h 
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
 2015-06-15 20:15:38 -05:00
AnHardt b93cddfcc9 Add lost MKS_BASE to pins.h (PR#2297) 2015-06-15 10:23:46 -05:00
AnHardt 6ab7b560af Rework buzzing (PR#2296) 
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
 2015-06-15 06:13:26 -05:00
Scott Lahteine 29122db2fa Fix ULTRA_LCD spelling in HAS_LCD_BUZZ 2015-06-15 06:12:34 -05:00
Scott Lahteine 1d94d098bf Formatting tweaks as part of fixing issue 1497 2015-06-14 19:57:27 -05:00
Scott Lahteine e602c28ad9 Set auto fan pins to OUTPUT during init 
Fixes the problem of these pins being left in INPUT state, as described
in #1497
 2015-06-14 19:57:27 -05:00
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280) 
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
 2015-06-14 08:16:00 -05:00
Scott Lahteine e2a4a83586 Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281) 2015-06-12 22:39:35 -05:00
Scott Lahteine 6b1b3adaf0 Consistent punctuation in SanityCheck errors (PR#2283) 2015-06-12 09:31:02 -05:00
MagoKimbra eb81982fcd Fix error next command in autotune (PR#2274) 
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
 2015-06-12 07:10:38 -05:00
AnHardt 55b23c896a Optimise out_of_range_error() (PR#2265) 
by avoiding the strncopy()
 2015-06-12 02:20:40 -05:00
filipmu b0860adab6 Fix volumetric multiplier display for filament sensor (PR#2264) 
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
 2015-06-12 02:19:27 -05:00
AnHardt 45642b7fe8 Respect DISABLE_AXIS settings (PR#2216) 
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
 2015-06-11 11:35:05 -05:00
wurstnase c85a486445 make the dual z-endstop optional (PR#2277) 
it's disabled by default
 2015-06-10 15:45:59 -05:00
Scott Lahteine 962b107341 Prevent current_command_args from bypassing nul (PR#2270) 2015-06-09 16:07:10 -05:00
Richard Wackerbarth 06ae832276 Deprecate Support for Arduino IDE < 1.0.5 
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
 2015-06-08 17:15:28 -05:00
Scott Lahteine ff6081be3a Parse N[0-9]+[ ]* differently (PR #2263) 
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
 2015-06-08 17:06:49 -05:00
Scott Lahteine aad121864e Include "Z" in M851 report 2015-06-08 05:09:27 -05:00
Scott Lahteine 96a3fba8ac Reverse the sign of zprobe_zoffset 
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
 2015-06-08 05:09:27 -05:00
fmalpartida f92907183c Updated SAV MkI pin header. 2015-06-08 05:07:11 -05:00
Richard Wackerbarth 58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed 
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
 2015-06-06 21:44:59 -05:00
CONSULitAS 788eb6e647 planner.cpp: remove tab 
planner.cpp: single evil and hidden tab removed ♻️ 😏
 2015-06-06 20:13:56 -05:00
CONSULitAS 3a5963c0e7 Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … 
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
 2015-06-06 20:13:56 -05:00
CONSULitAS e55e65d1e4 planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue … 
@CONSULitAS

planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)

@thinkyhead thanks for idea on linear scaling
 2015-06-06 20:13:56 -05:00
paclema 8d295547be * Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button. 2015-06-06 19:45:45 -05:00
atfield90 6d0e91328d Renamed Board_megatronics_1 to Board_minitronics 2015-06-06 18:59:04 -05:00
atfield90 c4a2e5ac23 Renamed Pins_megatronics_1 to Pins_minitronics 2015-06-06 18:59:04 -05:00
atfield90 2076906aaa Renamed Pins_megatronics_1 to Pins_minitronics 2015-06-06 18:59:04 -05:00
tonokip 10733a2bb0 added minirambo pin definitions. V2 2015-06-06 18:37:58 -05:00
Richard Wackerbarth 303d47228e Define Probe Path in new format 2015-06-06 17:48:27 -05:00
Richard Wackerbarth ad09d6a60f 3 Step Allen Key Probe 2015-06-06 17:48:27 -05:00
Richard Wackerbarth 8359cdf01d Check compatibility for Teensy-based processor 
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
 2015-06-06 17:24:34 -05:00
Ed Boston 08968c29bb Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples 2015-06-06 16:40:32 -05:00
Ed Boston fed18bcc20 Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER 
Hardware changes has removed the need for this option.
 2015-06-06 16:40:32 -05:00
Ed Boston b94a0e1501 Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED 
The new define allows the sd card detect to be inverted or not from
Configuration.h
 2015-06-06 16:40:31 -05:00
Ed Boston bc205c76a3 SDCARDDETECTINVERTED problems 
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
 2015-06-06 16:40:31 -05:00
AnHardt e400fce271 Merge pull request #2221 from MagoKimbra/Dryrun 
Insert Debug DRYRUN Repetier Host compatible
 2015-06-03 12:30:48 +02:00
AnHardt 163a9ff58e Merge pull request #2230 from AnHardt/psm 
Fix thermal protection state machine target temp. V2
 2015-06-03 09:46:53 +02:00
AnHardt c3fe6e61ae Merge pull request #2229 from AnHardt/position-out-of-range 
Fix out_of_range_error()
 2015-06-03 09:46:22 +02:00
MagoKimbra 4db8d2def4 Moved MSG_DEBUG in language.h 2015-06-03 08:18:27 +02:00
AnHardt b7e9ba7591 Back to 1.0.3 dev - for now 2015-06-03 00:47:11 +02:00
AnHardt d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning 
Versioning
 2015-06-02 18:31:21 +02:00
AnHardt b1404a0743 fix thermal protection state machine target temp. V2 
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.

Replaces #2119
 2015-06-02 12:26:21 +02:00
AnHardt 17b0ec84ed Fix out_of_range_error() 
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
 2015-06-02 11:50:32 +02:00
AnHardt 35af5ef23e Merge pull request #2225 from Wurstnase/naming 
consistency name for multiplier
 2015-06-02 10:18:22 +02:00
wurstnase e7e964432b consistency name for multiplier 
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
 2015-06-01 22:33:22 +02:00
AnHardt d4c6fc5d0a Merge pull request #2223 from AnHardt/dualz-semicolon 
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
 2015-06-01 20:15:55 +02:00
AnHardt 0d9d21d15f Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again. 2015-06-01 19:51:43 +02:00
MagoKimbra 76306f9073 Insert Debug DRYRUN Repetier Host compatible 2015-06-01 18:34:45 +02:00
MagoKimbra 881146bc22 Fix problem Width Cura 2015-06-01 17:25:32 +02:00
fmalpartida 11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing 
Updated LCD wiki location.
 2015-05-31 21:20:26 +02:00
Alexey Shvetsov a8670b66a7 Update ru translation 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2015-05-31 20:09:10 +03:00
fmalpartida 93da52d011 Added support for OLED SSD1306 I2C based LCDs. 2015-05-31 18:53:29 +02:00
Wurstnase 9c09967803 Merge pull request #2149 from Wurstnase/enstop_bits 
faster compare
 2015-05-31 16:02:55 +03:00
wurstnase 0f3f7d6835 clean up double endstops 2015-05-31 14:06:13 +02:00
AnHardt 9d2a980bcf Merge pull request #2170 from thinkyhead/beep_M600_elsewise 
Slight size reduction by adding idle()
 2015-05-30 12:42:32 +02:00
AnHardt 2728dc0606 Merge pull request #2194 from thinkyhead/reduce_strings 
Redo "invalid extruder" to save 304 bytes
 2015-05-30 11:05:08 +02:00
Scott Lahteine be5236e839 Reduce setTargetedHotend by removing the switch 2015-05-29 18:03:58 -07:00
Scott Lahteine 06f401e7e5 Redo "invalid extruder" to save 264 bytes 
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
 2015-05-28 22:25:28 -07:00
Scott Lahteine 1a882bcc2e Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands 
Ignore unknown commands if they start with G, M, or T
 2015-05-28 22:03:48 -07:00
Scott Lahteine a672872717 Merge pull request #2187 from AnHardt/MAX6675M105 
Print active extruder with M105 for MAX6675
 2015-05-28 18:12:48 -07:00
Scott Lahteine 9beed830eb Drop commented code_is_good lines 2015-05-28 17:53:47 -07:00
Scott Lahteine 068d4a1eb2 Ignore unknown commands if they start with G, M, or T 2015-05-28 17:44:09 -07:00
Scott Lahteine 5824f613ff Merge pull request #2185 from jothan/bed_integral 
Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…
 2015-05-28 16:32:02 -07:00
Scott Lahteine c5c9d12630 Merge pull request #2183 from AnHardt/displayinit 
Initialize the display earlier
 2015-05-28 16:29:18 -07:00
Scott Lahteine ef4becc413 Merge pull request #2188 from AnHardt/FtoN 
Replace MSG_F? with MSG_N?
 2015-05-28 16:18:50 -07:00
Scott Lahteine 0564625757 Update M33 for new gcode parser 2015-05-28 14:17:39 -07:00
AnHardt f18f689c01 Replace MSG_F? with MSG_N? 
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
 2015-05-28 20:30:23 +02:00
AnHardt af7e3f5076 Print active extruder with M105 for MAX6675 
Was omitted when T0 is a MAX6675.
 2015-05-28 19:03:16 +02:00
Jonathan Bastien-Filiatrault d46d9d998e Add maximum bed integral term in example configurations. 2015-05-28 12:51:37 -04:00
Jonathan Bastien-Filiatrault e86f2342c0 Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. 
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
 2015-05-28 11:48:04 -04:00
AnHardt f0523b5816 Initialize the display earlier 
to have it ready to display errors during (temperature)-setup.
 2015-05-28 16:08:17 +02:00
Scott Lahteine 790c697c19 Fix DEGREES macro 2015-05-28 00:19:48 -07:00
Scott Lahteine 76b4678f99 Merge pull request #2171 from thinkyhead/gcode_110_is_good 
M110 is a known command
 2015-05-26 21:17:58 -07:00
Scott Lahteine 03d5709b09 M110 is a known command 
- The command parser now displays “unknown command” in more cases.
Known commands must be added to the `switch` inside `process_commands`
to suppress the error.
 2015-05-26 20:31:18 -07:00
Scott Lahteine d76a01194d Slight size reduction by adding idle() 2015-05-26 20:08:21 -07:00
Richard Wackerbarth 2deb5a8ac5 Temporary Hack 
REVERT THIS CHANGE

In proper use, we want to force the vendor to update this file to reflect distribution parameters

However, until most users have converted to automatic versioning,
we “grant them a pass”
 2015-05-25 15:54:08 -05:00
Richard Wackerbarth b5743d6927 Use SOURCE_CODE_URL rather than FIRMWARE_URL 2015-05-25 15:53:34 -05:00
Richard Wackerbarth 5ea139fd79 Revised Versioning mechanism 2015-05-25 15:53:14 -05:00
AnHardt da246f5cb1 Activate BED_MINTEMP error. 
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().

Includes #2156.
 2015-05-25 13:23:19 +02:00
AnHardt 959da98d8e Call kill() only once when triggered by a temperature error 
to avoid stack overflow when called from interrupt.

Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
 2015-05-25 12:44:03 +02:00
Scott Lahteine 68f6f149d0 Reduce code size with out_of_range_error function 
- Affects code size when automatic bed leveling is enabled
 2015-05-24 20:18:02 -07:00
wurstnase 94120740d8 faster compare 
!(~(ab)&0x3) and ab == 0x3 are equal
 2015-05-23 07:55:15 +02:00
Scott Lahteine c9141e604a Merge pull request #2145 from thinkyhead/gcode_folding 
Indentation in process_commands
 2015-05-22 18:47:37 -07:00
Scott Lahteine b55f8718c3 Indent G90/G91, G92 2015-05-22 17:34:08 -07:00
Scott Lahteine b0d520b109 Indent G30, G31/G32 2015-05-22 17:33:17 -07:00
Scott Lahteine ffe27a6225 Indent G29 2015-05-22 17:32:46 -07:00
Scott Lahteine 86083badc2 Indent G4, G10/G11, G28 2015-05-22 17:32:27 -07:00
Scott Lahteine 47d7a9cb5e Indent G2/G3 2015-05-22 17:31:38 -07:00
Scott Lahteine 350f239d84 Indent G0/G1 2015-05-22 17:31:24 -07:00
Scott Lahteine 672b0c1fd3 Cleanup pins in RAMPS_13_EFB boards 2015-05-22 16:20:54 -07:00
Scott Lahteine 15a2351675 No need for +1 on initial seen_pointer 2015-05-22 15:31:30 -07:00
Scott Lahteine 550dd87b2a Set seen_pointer before calling code_value 2015-05-22 15:11:48 -07:00
Scott Lahteine 38cc0b93c6 Merge pull request #1874 from AnHardt/Bulgarian 
Introduction of Bulgarian - language_bg.h
 2015-05-22 13:59:50 -07:00
Scott Lahteine 04a1622172 Merge pull request #2127 from Wackerbarth/Kossel_Pro 
Kossel Pro
 2015-05-21 18:43:26 -07:00
Scott Lahteine 81c2ca3e10 Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb 
Witbox and Hephestos are RAMPS EFB
 2015-05-21 18:39:02 -07:00
Scott Lahteine f919a2fed1 Merge pull request #2134 from AnHardt/preheat-all 
Shift call of start_watching_heater() into setTargetHotend()
 2015-05-21 18:36:28 -07:00
Scott Lahteine 063881b5bd Fix a couple of doubled semicolons 2015-05-21 18:15:29 -07:00
AnHardt 94dff5b36a Merge pull request #2137 from thinkyhead/tweak_swh 
Move millis call in start_watching_heater
 2015-05-22 02:02:07 +02:00