zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
8428 commits 1 branch 0 tags 156 MiB
Commit graph

6972 commits

Author SHA1 Message Date
Scott Lahteine a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue 
Addressing #6992 and #5851
 2017-06-23 14:53:01 -05:00
Scott Lahteine 254a11b083 Merge pull request #7120 from thinkyhead/bf_sainsmart_link 
Add link to F. Malpartida LiquidCrystal library
 2017-06-22 14:04:23 -05:00
Scott Lahteine aeb6d465a4 Merge pull request #7118 from thinkyhead/bf_french_update 
French update
 2017-06-22 13:10:07 -05:00
Bob-the-Kuhn 325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
MagoKimbra d26c8cc5c8 fix_planner_refresh_e_positioning (#7103) 
* fix_planner_refresh_e_positioning

* Fix
 2017-06-22 12:59:22 -05:00
Gege2B c7f04fbcc7 French translation 2017-06-22 12:49:23 -05:00
Silvio Didonna 4171520729 added missing italian translation 2017-06-21 11:08:39 +02:00
Bob-the-Kuhn 41bfff14e2 Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping 
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
 2017-06-20 16:36:22 -05:00
Scott Lahteine 424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare 
Apply maths macros and type changes ahead of HAL
 2017-06-20 01:15:23 -05:00
Scott Lahteine 5c59ee4e93 Use current (raw) Z if omitted from G29 WXY or G29 WIJ. 2017-06-20 00:10:52 -05:00
Scott Lahteine 37bc0fce62 Make G29 compatible with M206 Z and G92 Z 
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
 2017-06-20 00:09:59 -05:00
Scott Lahteine 6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine 8a51e2960c Improve the experience of editing steps_per_mm 2017-06-19 22:17:15 -05:00
Scott Lahteine 725d9d9a56 Fix and improve LCD value editing display 
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
 2017-06-19 22:17:15 -05:00
Scott Lahteine 499bb85a95 Clean up, put ubl menu itemization closer at hand 2017-06-19 22:17:14 -05:00
Tannoo 90f5f82926 Step-by-Step Menu addition 2017-06-19 20:15:11 -05:00
Scott Lahteine 0c616700f3 Merge pull request #7097 from thinkyhead/bf_dac_percents_fix 
Convert DAC percent to uint8_t
 2017-06-19 17:58:55 -05:00
Florian Heilmann 6dcf42f1a7 Add Z Fade Height to M420 output if it is enabled (#7042) 
* Add Z Fade Height to M420 Output

Echo the z-fade height when M420 is called, if it is enabled.

* Fix Whitespace

* Fix Compiler complaint

* Missing semi-colon
 2017-06-19 17:53:07 -05:00
Bob-the-Kuhn a1c65fd3d5 convert DAC percent to uint8_t 
=====================

add test to Travis
 2017-06-19 17:46:41 -05:00
Scott Lahteine 907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
Ross Allan cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine b8b7ef1902 Merge pull request #7090 from thinkyhead/bf_italian_refix 
Fix Italian language mapper
 2017-06-19 09:27:13 -05:00
Scott Lahteine 42f7f9e013 Merge pull request #7060 from bgort/i2cpefix 
I2C Position Encoders Example Configs
 2017-06-19 01:08:42 -05:00
Scott Lahteine 0b49bddec2 Fix Italian language mapper 2017-06-19 01:01:40 -05:00
Silvio Didonna 2e26a7c752 Added missing Italian translations 2017-06-18 23:37:48 -05:00
Scott Lahteine 4c3dc8bf07 Remove set_current_to_destination from resume_print 
Addressing #7057
 2017-06-18 23:01:13 -05:00
Scott Lahteine 4857a3ba48 Formatting and spelling 2017-06-18 23:01:12 -05:00
Thomas Moore 3d24c329af M600 fixes 2017-06-18 23:00:56 -05:00
Bob-the-Kuhn 8fb30aaed6 warn user of an invalid combination 2017-06-17 15:04:47 -05:00
Bob-the-Kuhn 6cb9bb27fe Move lcd_refresh_zprobe_zoffset definition 2017-06-16 21:46:33 -05:00
Scott Lahteine d4270f15a9 Spacing tweak in setup() 2017-06-16 14:21:05 -05:00
Scott Lahteine c61c0a9aeb Fix status message missing "blink" 2017-06-16 14:18:19 -05:00
Scott Lahteine 062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Jim Brown 3d043976f7 Add option to disallow filament change without homing first 2017-06-16 13:32:17 -05:00
Scott Lahteine 93da4e83f7 One more space on a short status message 2017-06-16 12:58:25 -05:00
Scott Lahteine 7c95f762f2 Show LCD bed options even without thermal protection 2017-06-15 15:29:56 -05:00
Scott Lahteine 92eb55f246 Reject generous donation of trailing whitespace 2017-06-15 15:25:24 -05:00
Scott Lahteine 428be27893 Formatting adjustments 2017-06-15 15:25:24 -05:00
Scott Lahteine 8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine 7769a22064 Tweaks to temperature code 2017-06-15 15:25:23 -05:00
Scott Lahteine d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Scott Lahteine 499d5c3b24 Fix scrolling lcd message for DOGM 2017-06-15 15:07:39 -05:00
Scott Lahteine 7164fd499e Tweak to G33 P error 2017-06-15 14:43:40 -05:00
Scott Lahteine c10d763d98 Simpler prepare move conditions 2017-06-15 14:43:40 -05:00
Scott Lahteine 4ebff8eaa5 Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
Scott Lahteine 09bc34f4dc Allow arbitrarily long retraction 2017-06-15 14:43:30 -05:00
Scott Lahteine 4414825e0d Merge pull request #7038 from thinkyhead/bf_PCA9632 
PCA9632 PWM color LED support
 2017-06-15 14:41:24 -05:00
Bob-the-Kuhn 9dda022705 fix compile errors 
================================

Changed to conditional compile for AT90USB issue
 2017-06-15 13:18:14 -05:00
Bob-the-Kuhn b3338ccb01 Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs 
SD card soft SPI - allow all CPU families to use it
 2017-06-15 01:03:39 -05:00
Brian 40bb0cbf7a example configurations, etc. 2017-06-14 18:04:28 -04:00
Jim Brown 26d20ebcfc Don't allow filament change without homing first (#7054) 2017-06-13 17:11:37 -05:00
Roxy-3D 824f71d503 LCD Panel Interactive Mesh Editing (#7045) 
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
 2017-06-12 18:26:49 -05:00
Scott Lahteine 445227c807 Fix missing LCD_STR_REFRESH 2017-06-12 01:28:52 -05:00
Scott Lahteine 699aa35df6 Code cleanup for G33 2017-06-12 01:25:40 -05:00
dot-bob 0bc66bf22c PCA9632 PWM color LED support 
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
 2017-06-12 01:09:24 -05:00
Luc Van Daele 896dfa0577 G33 eccentric probe fixes (#6850) 
* excentric probe config fix

* undo last commit

* eccentric probe fix

* oops

* !stow after each probe

* deploy/stow fix

* E parameter + bit of cleanup

* comment

* LCD menu fix
 2017-06-12 01:07:19 -05:00
Thomas Moore e47029199e Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000) 
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF

* Add HEATER_IDLE_HANDLER conditional
 2017-06-12 00:22:31 -05:00
Scott Lahteine 8326c1c279 Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x 
added shift register pins for reprapworld keypad v1.1
 2017-06-11 23:12:11 -05:00
Scott Lahteine 07f8da36d2 CL-260 configs 2017-06-11 19:40:13 -05:00
Scott Lahteine dce665a083 Merge pull request #7025 from magnuspub/patch-1 
Mod in language_it.h
 2017-06-11 19:09:46 -05:00
Scott Lahteine 7b09ab6bda Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes 
Fix pinsDebug problem & add capability to display more than 70 pins
 2017-06-11 19:09:09 -05:00
Scott Lahteine 5bdb4bbc5e Merge pull request #7030 from thinkyhead/bf_circular_scroll 
Circular scrolling of the status message
 2017-06-11 19:07:38 -05:00
Federico 772275ab0c Create language_it.h 2017-06-11 10:37:34 +02:00
Bob-the-Kuhn 11e28f389e fix pinsDebug.h error, add capability to display more than 70 pins. 2017-06-10 22:01:15 -05:00
Scott Lahteine 21217d53df Circular scrolling of the status message 2017-06-10 20:56:00 -05:00
Scott Lahteine da8e946efb Reduce size of heater state print code 2017-06-10 20:26:17 -05:00
Scott Lahteine dde8bb7c8b Fix extrude_min_temp compiler warning 2017-06-10 20:07:36 -05:00
Scott Lahteine 83263076dc Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations 
fix get/setDrvPct declarations
 2017-06-10 19:06:50 -05:00
Scott Lahteine 57a51fd5db Tweak some else clauses 2017-06-10 16:40:10 -05:00
Scott Lahteine fc89de6d8b Followup to German language update 2017-06-10 16:27:39 -05:00
Federico 92011e3d8c Create language_it.h 2017-06-10 21:50:14 +02:00
Dave Johnson 7864b133a8 Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
Scott Lahteine 0b6b7c9c7e Merge pull request #7013 from thinkyhead/bf_german_update 
Update language_de.h
 2017-06-09 21:41:19 -05:00
Scott Lahteine f17a3c2474 Merge pull request #6889 from thinkyhead/bf_at90usb_mapping 
Unify all AVR90USB pin mappings
 2017-06-09 21:00:13 -05:00
Kai 5a72b6818e update language_de.h 
Following #6990 some more translations and some grammar fixes
 2017-06-09 19:45:09 -05:00
Scott Lahteine 4cc5444144 Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN 
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
 2017-06-09 19:42:56 -05:00
Scott Lahteine 51bc50214a Save 8 bytes of SRAM 2017-06-09 19:20:16 -05:00
Scott Lahteine 748bf32388 Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
Scott Lahteine 5426fc1735 Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
Scott Lahteine 87d8223251 Unify AVR90USB: Pins remap to Arduino 2017-06-09 18:48:12 -05:00
Scott Lahteine b378deaf89 Unify AVR90USB: fastio changes 2017-06-09 18:21:57 -05:00
Scott Lahteine e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Scott Lahteine d91710e9aa Followup for UBL translated strings 2017-06-09 16:59:26 -05:00
Scott Lahteine 761df686bd Minor cleanup in gcode.h 2017-06-09 16:59:26 -05:00
Thomas Moore 897bc2ac1f Updates for ensure_safe_temperature (#6963) 
* Updates for ensure_safe_temperature

* M600 fixes
 2017-06-09 15:19:08 -05:00
Bob-the-Kuhn 1c107b3949 delete problem line 2017-06-09 11:53:36 -05:00
Diederik van der Pant 5b270417ed added shift register pins for reprapworld keypad v1.1 
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
 2017-06-09 14:17:47 +02:00
bgort 2f55870edb [New Feature] I2C position encoder support (#6946) 
* [New Feature] I2C position encoder support

I plan to continue improving/cleaning this up, as there areas that need work.

* let the cleanups begin.

* progress

* more progress

* comments, rename files, etc.

* clean

* Cleanups per thinkyhead

* a few more cleanups

* cleanups, bugfixes, etc.

* remove unnecessary passes_test(), additional cleanups/optimizations

* cleanups

* misc.

* Fix up I2CPEM.init() and a few other things.

* organize, fix, rename, etc.

* more optimization

* a few more tweaks
 2017-06-09 08:06:23 -04:00
Bob-the-Kuhn 28d72f48f1 change to DWORD 2017-06-08 16:15:02 -05:00
Bob-the-Kuhn 8d1d9040b6 add static 2017-06-08 14:59:21 -05:00
Bob-the-Kuhn a17ffe1ece Merge pull request #6985 from Kaibob2/patch-1 
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
 2017-06-08 11:18:56 -05:00
Tannoo 731c8e6372 Translatable Strings for ubl_G29 (#6990) 2017-06-08 10:09:39 -05:00
Kai abb6b8ad54 update language_de.h (#6986) 
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
 2017-06-08 10:04:52 -05:00
Kai c2eff60d3f Fix for #6980 
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
 2017-06-08 09:19:04 +02:00
Scott Lahteine 1419126721 Merge pull request #6965 from thinkyhead/bf_save_more_sram 
Use createChar_P to save SRAM in bootscreen
 2017-06-07 17:34:19 -05:00
Scott Lahteine a453be7357 Merge pull request #6973 from bgort/autoreportT 
Enable AUTO_REPORT_TEMPERATURES by default
 2017-06-07 17:33:40 -05:00
Scott Lahteine 1d615e0a67 Merge pull request #6976 from Tannoo/Leveling_in_About_Printer 
Leveling type in About Printer
 2017-06-07 17:26:21 -05:00
Scott Lahteine 707707d71a Fix LCD status message padding 2017-06-07 16:07:38 -05:00
Scott Lahteine e556ab1dff Find three-point leveling points on Delta 2017-06-07 16:07:38 -05:00
Scott Lahteine a27b08e6af Various code style tweaks 2017-06-07 16:07:38 -05:00
Scott Lahteine dac29e0f75 Cleaner failure of UBL without EEPROM 2017-06-07 16:07:38 -05:00
Scott Lahteine 9128d9ab45 Improve sanity checks with static_assert, organize 2017-06-07 16:07:38 -05:00
Scott Lahteine 6bb05c4543 Save 20b in smart_fill_mesh with PROGMEM 2017-06-07 16:07:38 -05:00
Scott Lahteine b7dc4d9973 Save 92b PROGMEM, 14b SRAM with extruder auto fan 2017-06-07 16:07:38 -05:00
Scott Lahteine c9e3caf928 Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C 2017-06-07 16:07:38 -05:00
Scott Lahteine 4134a6b526 Save 88b PROGMEM, 48 bytes SRAM in settings.reset 2017-06-07 16:07:38 -05:00
Scott Lahteine 36cc03a9b4 Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate 2017-06-07 16:07:38 -05:00
Scott Lahteine 2a41f0ff84 Save 28b PROGMEM in ultralcd.cpp (line_to_current) 2017-06-07 16:07:38 -05:00
Scott Lahteine e6d10f6ddd Spend 48b PROGMEM to save 16b SRAM 
...by moving `homing_feedrate_mm_s` to PROGMEM.
 2017-06-07 16:07:38 -05:00
Scott Lahteine 97e13a30ba Save over 100 bytes SRAM in pin_is_protected 2017-06-07 16:07:38 -05:00
Scott Lahteine 45c74406cf Recover 32 bytes of SRAM in Marlin bootscreen code 2017-06-07 16:07:38 -05:00
Scott Lahteine e1c5a43247 Cleanup stepper current control config options 2017-06-07 16:07:38 -05:00
Scott Lahteine efc198f952 Spacing, const, comments 2017-06-07 16:07:38 -05:00
Scott Lahteine 4406fba994 Fixes #6975 2017-06-07 11:14:30 -05:00
Scott Lahteine d28f5d8a78 Fix: z_endstop_adj is never initialized 2017-06-07 10:29:56 -05:00
Scott Lahteine 5d5ff36446 Fix a compile error with _lcd_set_z_fade_height 2017-06-07 10:29:56 -05:00
Tannoo b88957e0d4 Leveling type in About Printer 
Show the Leveling system in use on the About Printer screen.
 2017-06-07 06:28:33 -06:00
Brian dd071a4a65 Enable AUTO_REPORT_TEMPERATURES by default 2017-06-07 02:52:35 -04:00
bgort 8db1197c9b Enable extended capabilities report by default (#6969) 
Ref #5139
 2017-06-07 02:36:34 -04:00
bgort 82e662fc69 Remove requirement for LCD when UBL is used. (#6971) 
* Remove requirement for LCD when UBL is used.

* fix previous oversights

* further refinement - error messages for P2 & P4

* require R on G26 when not using LCD; default to all points
 2017-06-07 02:24:36 -04:00
Tannoo 2c2b991b59 UBL Manual Build Menu Option (#6972) 
One click option to manually build UBL mesh.
 2017-06-06 22:14:18 -05:00
Roxy-3D 0dd0033b33 Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964) 
* Save up to 94 bytes of RAM on 20x4 LCD Display machines

Moved the custom screen characters out of RAM into Program Memory.  With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.

This was tested using the example_configurations/FolgerTech-i3-2020
files.  So a couple small changes to those files snuck into this Pull
Request.

Probably...  We can find similar savings in the Graphics LCD code it we
comb through it.   And if so...  That is the place we really need to
save RAM memory!

* Tidy up white space and indentation
 2017-06-05 17:02:00 -05:00
Bob-the-Kuhn ba0bd33c38 Removed check for 2560 family 2017-06-04 22:16:27 -05:00
Scott Lahteine 04b07a6ecc Unused var in Stepper 2017-06-04 17:25:16 -05:00
Scott Lahteine eb8af486d2 Ensure safe temperature for M600 2017-06-04 17:25:16 -05:00
Scott Lahteine bfe7fbe5c0 Maintain message scroll rate 2017-06-04 17:25:15 -05:00
Scott Lahteine 6411d65c48 Fix Morgan SCARA S2 calculation 2017-06-04 12:24:09 -05:00
Scott Lahteine 46752588b9 Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature 
fix redefinition errors for redundant_temperature
 2017-06-04 12:16:09 -05:00
Scott Lahteine 5938dae200 Merge pull request #6950 from MagoKimbra/fix_g29_3_point 
Fix G29 with 3 point
 2017-06-04 12:15:44 -05:00
Scott Lahteine c5e0f08e35 Merge pull request #6951 from fixoid/patch-4 
Initializing extruder/nozzle servo when turning on the printer
 2017-06-04 12:13:05 -05:00
Scott Lahteine e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
fixoid 1aab9906e6 Initializing extruder/nozzle servo when when turning on the printer 2017-06-04 16:57:24 +03:00
MagoKimbra 663ff7f92a Fix G29 with 3 point 2017-06-04 14:39:31 +02:00
oldmcg 9f295581f0 Ubl delta fixes and improvements (#6941) 
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
 2017-06-03 17:11:43 -05:00
Bob-the-Kuhn c34d7a29a6 fix redefinition errors for redundant_temperature 
Removing redundant_temperature from public section and leaving it in the
private section
 2017-06-03 16:40:14 -05:00
Bob-the-Kuhn 6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine 789b2928a8 Tweak scrolling message code 2017-06-02 23:45:53 -05:00
Scott Lahteine fc7d7f87b4 Init probe test pin with FastIO 2017-06-02 23:45:52 -05:00
Scott Lahteine 0282452cea Make Parser::seen volatile 2017-06-02 23:45:52 -05:00
Scott Lahteine 9a305a467b Patch LCD Contrast menu item 2017-06-02 23:45:52 -05:00
Scott Lahteine 90ccac4bcf Clean up after recent commits 2017-06-02 23:45:52 -05:00
Bob-the-Kuhn 2130f10de8 allow space between parameter and value 2017-06-02 19:57:22 -05:00
Bob-the-Kuhn ebda4663c3 for discusion 2017-06-02 19:42:43 -05:00
FATALHERMIT 911079104e Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
Scott Lahteine 65a0212866 Easier override of FILWIDTH_PIN 2017-06-02 12:05:46 -05:00
Scott Lahteine 147d9d76fc Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards 
Fix case light logic on Azteeg_X3 boards.
 2017-06-01 20:14:15 -05:00
guntherv73 4288c4fb4f Configurations for Malyan M150 2017-06-01 19:26:29 -05:00
Scott Lahteine 1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Bob-the-Kuhn 9a9bbfc57c Fix case light logic on Azteeg_X3 boards. 2017-06-01 12:33:24 -05:00
Thomas Moore a32f7b329c Fix heater status display for advanced pause 2017-06-01 12:29:47 -05:00
Scott Lahteine 445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine 4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine 4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine 8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine c74d4dede6 Prevent illegal leveling combinations 
Addressing issue #6901
 2017-05-31 23:36:57 -05:00
Scott Lahteine 155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay 
Account for dual XYZ in pulse delay cycles estimate
 2017-05-31 22:21:47 -05:00
Scott Lahteine a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn 1b41e1f645 another compile error 
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
 2017-05-31 13:59:49 -05:00
Bob-the-Kuhn 65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) 
M355 case light improvements (replaces PR #5685)
 2017-05-31 13:33:59 -05:00
Bob-the-Kuhn 9657e7d3ee copied file changes from PR #5685 
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
 2017-05-31 13:22:38 -05:00
Bob-the-Kuhn 8206bb9bb9 fix compile error 
invalid conversion from 'const char*' to 'char*' [-fpermissive]
 2017-05-31 13:17:01 -05:00
Scott Lahteine df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine 7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine 89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck 
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
 2017-05-30 13:43:39 -05:00
Scott Lahteine 05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands 
Custom user commands menu
 2017-05-30 13:40:50 -05:00
Scott Lahteine 84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance 
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
 2017-05-30 13:37:51 -05:00
Scott Lahteine 266ae8912a Formatting in _draw_heater_status 2017-05-30 03:32:16 -05:00
Scott Lahteine 6b9ca16f36 Patch lcd_print edge limit code 2017-05-30 03:32:15 -05:00
Tannoo 74d6dee920 User Command (Script) Menu 
The menu (commands / scripts) is configurable in `Configuration_adv.h`.

- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
 2017-05-30 02:33:57 -05:00
Scott Lahteine d9c8072037 Edit PROPORTIONAL_FONT_RATIO comment 2017-05-30 01:29:39 -05:00
Scott Lahteine 46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine ca99d67ede Fix UBL "Info screen" menu items 2017-05-29 19:55:26 -05:00
Scott Lahteine 2c7a39bc0e Fix LCD print aborted message 2017-05-29 19:52:01 -05:00
Scott Lahteine 0f1e8c195d Draw on LCD after value has changed 2017-05-29 19:42:30 -05:00
Scott Lahteine 51587c4b43 Rename Feedrate to Velocity to match prior naming 2017-05-29 17:54:15 -05:00
Scott Lahteine 9677f3f2f5 Patch up LCD Bed Leveling menu 2017-05-29 17:51:11 -05:00
Scott Lahteine fc2eaab7f3 Show home option in level bed menu 2017-05-29 17:51:10 -05:00
Scott Lahteine c6a7adc293 Patch G29 A and Q arguments to bypass setup 2017-05-29 17:51:10 -05:00
Scott Lahteine 4cece2d72e Use NAN for G29 W omitted parameters 2017-05-29 17:51:10 -05:00
Scott Lahteine 2d71569138 Fix spacing in JSON output 2017-05-29 17:51:10 -05:00
Scott Lahteine b2d3c8aedd Have G28 do a refresh of the display 2017-05-29 17:51:10 -05:00
Scott Lahteine 50ab9c2e04 General cleanup of spacing, comments 2017-05-29 15:34:14 -05:00
Scott Lahteine f1e33afda4 Return to Bed Leveling menu when done 2017-05-29 15:31:02 -05:00
Scott Lahteine 78d8c598e1 Fix lcd_synchronize with message 2017-05-29 15:31:02 -05:00
Scott Lahteine eb39d6e3e2 Don't draw progress bar until it has 1% 2017-05-29 15:31:01 -05:00
Scott Lahteine 194f8b2f55 Start at Z=0 in manual probing 2017-05-29 15:31:01 -05:00
Scott Lahteine 6f89db11f0 Allow lcd_setstatusPGM to reset the alert level 2017-05-29 15:31:00 -05:00
Scott Lahteine 3fe333143c Case light as a toggle menu item 2017-05-28 14:32:07 -05:00
Scott Lahteine d013bddfa8 Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu 
Extend the ABL/MBL Bed Leveling menu
 2017-05-28 14:19:02 -05:00
Scott Lahteine 01e7e234c6 Add more options to the Bed Leveling menu 2017-05-28 14:04:28 -05:00
Scott Lahteine 0cbe448edf Split up Control > Motion submenu 2017-05-28 12:52:24 -05:00
Scott Lahteine a3645ec921 Reference op with variable name 2017-05-28 11:33:22 -05:00
Scott Lahteine 71367fd518 Scrolling status message option 2017-05-28 11:26:28 -05:00
Scott Lahteine b0eae68f57 Prevent bed temperature being set too high 2017-05-28 11:11:17 -05:00
Scott Lahteine 493f0b0c62 Fix some compiler warnings 2017-05-28 11:06:33 -05:00
christianh17 f379a326cc enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle 
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
 2017-05-28 15:33:28 +02:00
Scott Lahteine 33279a1e02 Code style tweak to gcode.h 2017-05-27 19:47:26 -05:00
Ernesto Martinez ac959b12ee Updates to language_es.h based on latest updates. (#6871) 
Spanish language updates
 2017-05-27 19:08:39 -05:00
Scott Lahteine 55c700d537 Tweak to gcode.h 2017-05-26 22:11:31 -05:00
Bob-the-Kuhn 868e7db4ae value check was looking at the code 2017-05-26 14:49:42 -05:00
Thomas Moore fb5e0ffe16 Unify M600 and M125 pause features (#6407) 
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
 2017-05-26 13:01:02 -05:00
Scott Lahteine b3a97b5013 Patch up LCD level bed menus 2017-05-25 23:53:31 -05:00
Scott Lahteine 78af2b1444 Fix PROBE_MANUALLY via G-code 2017-05-25 23:53:31 -05:00
Scott Lahteine 082da23391 One fewer EOL in M503 output 2017-05-25 23:53:31 -05:00
Scott Lahteine b15e531464 Fix screen change on character display 2017-05-25 15:29:14 -05:00
Thomas Moore 44e657766e Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE 2017-05-25 08:06:27 -05:00
Scott Lahteine 735405b2a4 Merge pull request #6848 from thinkyhead/bf_scara_M665 
Add M665 for SCARA
 2017-05-24 20:51:51 -05:00
Scott Lahteine ffa901f373 Merge pull request #6839 from thinkyhead/bf_day_ending_in_y 
UBL ultralcd.cpp patches
 2017-05-24 17:55:44 -05:00
Scott Lahteine 361cbba113 Use M665 to set SCARA angle offsets 2017-05-24 17:49:24 -05:00
Scott Lahteine 5ed63a5724 Apply const in prepare_kinematic_move_to 2017-05-24 17:49:24 -05:00
Scott Lahteine 5cbe0244c5 Fixes for spindle/laser and SCARA probe bounds 2017-05-24 17:49:23 -05:00
Scott Lahteine 1f52c9f5df Neater Megatronics 3 pins 2017-05-24 17:49:23 -05:00
Scott Lahteine af81cb4cbb Patch for M503 output 2017-05-24 17:49:09 -05:00
Scott Lahteine 1d167a6874 Some cleanup, fixes for ultralcd.cpp UBL code 
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
 2017-05-24 01:10:42 -05:00
Scott Lahteine f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine 002a06c507 New GCode Parser - Configuration 2017-05-23 14:15:07 -05:00
Scott Lahteine ad915b667e One more mesh_index_to_npos update 
Followup to #6827
 2017-05-23 13:02:50 -05:00
Scott Lahteine 2881f0a48d Fix, extend G42 with P (probe) parameter 
- Also fix handling of SCARA and misuse of `codenum`.
 2017-05-23 04:55:42 -05:00
Scott Lahteine d252d1b6a2 Merge pull request #6831 from thinkyhead/bf_move_g7 
Move G7 to G42
 2017-05-23 03:02:57 -05:00
Brian 82ca6248e2 Move G7 to G42 
See: #6777
 2017-05-22 23:21:35 -05:00
Scott Lahteine 26ffa558a3 Use redraw flag for both types of LCD 2017-05-22 18:34:54 -05:00
Scott Lahteine 3ff7515527 Merge pull request #6817 from cbusillo/patch-1 
missing enable for M605 for duplication mode
 2017-05-22 18:07:11 -05:00
Scott Lahteine 34cfbc90cd Use new attribute macros in more places 2017-05-22 17:38:58 -05:00
Scott Lahteine 85b967657e Embed G26/G29 in ubl class, with enhancements 2017-05-22 17:38:58 -05:00
Scott Lahteine c99bd69889 Apply const float & more 2017-05-22 17:38:36 -05:00
Scott Lahteine ad5638f78c Cleanup some fastio code 2017-05-22 17:38:36 -05:00
Scott Lahteine e271521c39 Single user_canceled function in G26 2017-05-22 17:38:36 -05:00
Scott Lahteine c2ea22da49 Clean up whitespace 2017-05-22 17:38:36 -05:00
Scott Lahteine ceb62fc7e1 Fixes #6828: M428 bug 2017-05-22 17:34:03 -05:00
oldmcg 48f7652143 UBL G29 -P3.1 smart fill (#6823) 
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.

* Back to original -O0 on G29 for now.
 2017-05-22 12:33:50 -05:00
Scott Lahteine 850203fb3a Merge pull request #6816 from thinkyhead/bf_lcd_live_editing 
Constrain LCD status message rendering
 2017-05-22 11:15:35 -05:00
Roxy-3D 3129260c44 Misc. Clean Up (#6822) 
* Misc. Clean Up

Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.

* Huh???   GitHub Desktop screwed up!

* get the planner object in scope

* Fix out of scope z_fade_height

* Travis timed out...

I need a change so I can force a new commit and sync.
 2017-05-21 22:09:51 -05:00
cbusillo 3b4116e73b missing enable for M605 for duplication mode 
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
 2017-05-21 13:54:20 -04:00
Scott Lahteine 5e8892d6b5 Show Restore Failsafe item with EEPROM off 2017-05-21 12:52:44 -05:00
Scott Lahteine 76af9ac7c5 tweaks 2017-05-21 12:51:58 -05:00
Scott Lahteine ba5910ab6c Constrain LCD status message rendering 2017-05-21 12:35:16 -05:00
MagoKimbra 2c309a8f7c Fix set_lcd_contrast 2017-05-21 19:01:44 +02:00
Scott Lahteine 22dbb2117c Merge pull request #6812 from thinkyhead/bf_day_ending_in_y 
Cleanup code, organize & document fastio pin mappings
 2017-05-21 11:39:04 -05:00
Roxy-3D 364f8fb613 Update Configuration.h files to better names (#6814) 
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
 2017-05-21 11:10:22 -05:00
Scott Lahteine d7fda2fe49 Formatting, const in G33 2017-05-21 10:40:05 -05:00
Scott Lahteine 1519b0e7c1 Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
Scott Lahteine 49599caade General cleanup to utf_mapper.h 2017-05-21 10:33:27 -05:00
Scott Lahteine 02f15f6775 UBL-related cleanup, spacing, standards 
Reference: #6804
 2017-05-21 10:33:26 -05:00
Scott Lahteine 52e20aeab3 Pins-related cleanup, formatting 2017-05-21 07:18:03 -05:00
Scott Lahteine ea906e4da7 Merge pull request #6810 from thinkyhead/bf_lcd_live_editing 
Add "live editing" option to LCD menus
 2017-05-21 06:11:52 -05:00
Scott Lahteine 11fc9564c9 Add live editing option to LCD menu 2017-05-21 05:29:46 -05:00
Scott Lahteine 8a0a5cfccc Temp-related cosmetic changes 2017-05-21 04:49:25 -05:00
Scott Lahteine b29dbbd5e4 Use uint16_t for temps 2017-05-21 04:48:53 -05:00
Scott Lahteine ebcd1aaf88 Access hotend/bed temperatures as float 2017-05-21 04:46:31 -05:00
Scott Lahteine 6ce2b1ff4a G33 evolutionary changes 2017-05-20 19:23:39 -05:00
Scott Lahteine 3c061a9f9a UBL tabs, whitespace, spelling, etc. 2017-05-19 14:16:50 -05:00
Scott Lahteine 75badae2f8 Disable PROBE_MANUALLY for UBL 
Plus some other UBL tweaks.
 2017-05-19 07:13:18 -05:00
Scott Lahteine 94a4af1d7f Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5 
Patch LCD code for 5th extruder
 2017-05-18 15:26:55 -05:00
Brian 01f452c37c Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light. 
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
 2017-05-18 13:00:13 -04:00
Brian e09b4ce4a5 Add checking 2017-05-17 19:46:16 -04:00
Brian 13599a73c7 Add G7 gcode command to move between UBL mesh points 
- can be augmented in the future to enable for other leveling systems

Quite simple, but did not want to modify `G1` as the additional checking would slow it down.

Tested & working.
 2017-05-17 19:05:36 -04:00
Brian 43c24f0027 Fix recent regressions, &c. 
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
 2017-05-17 17:21:46 -04:00
Scott Lahteine 3843a5151a Patch LCD code for 5th extruder, EEPROM reset 2017-05-17 15:33:51 -05:00
Scott Lahteine 6c064bb7d6 Some probe_pt error-handling 2017-05-17 15:33:51 -05:00
Brian 3370329751 Fix broken EEPROM save/load 2017-05-17 12:41:27 -04:00
Scott Lahteine f0fe26c411 Ensure Arduino.h and configs are included for serial.cpp 2017-05-17 05:07:35 -05:00
Scott Lahteine ffb5353294 Merge pull request #6738 from thinkyhead/bf_config_crc_rebase 
Implement CRC16, develop mesh allocation table
 2017-05-17 04:44:00 -05:00
Scott Lahteine e806e6419a Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5 
Spindle / Laser support
 2017-05-17 04:39:32 -05:00
Scott Lahteine d6f49c6626 Merge pull request #6752 from jdelahayes/bugfix-1.1.x 
Update french language
 2017-05-17 04:32:28 -05:00
Scott Lahteine 55a87da036 SPINDLE/LASER implementation 2017-05-17 04:26:15 -05:00
Scott Lahteine ffe0e2d19a SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
Scott Lahteine 99c4900a98 SPINDLE/LASER config changes 2017-05-17 04:23:06 -05:00
Scott Lahteine a3abfeac47 Mark strings needing translation 2017-05-17 03:49:33 -05:00
Scott Lahteine 7f4e4b1212 UBL name/state methods 2017-05-17 03:49:32 -05:00
Brian 7852369987 Implement CRC16, develop mesh allocation table 
- Add crc16 utility function
 - Implement CRC16 for config store, remove old checksum, increment layout version
 - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
 - Begin to lay out MAT structure, prototype functions, etc.
 - Rename ubl.state.eeprom_storage_slot to .storage_slot
 - Misc. optimization
 - Cleanup/standardize/improve some messages

This is a work in progress!
 2017-05-17 03:49:19 -05:00
Scott Lahteine 00d358d92d Fix a PROBE_MANUALLY bug in ultralcd.cpp 2017-05-17 03:49:19 -05:00
fixoid c2321b1cdd Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER 2017-05-16 19:25:17 -05:00
Scott Lahteine 238fb53617 Patch home_all_axes to ignore G28 XYZ parameters 2017-05-16 16:18:38 -05:00
Scott Lahteine 6b6630e11b Clean up trailing whitespace and tabs 2017-05-16 16:06:18 -05:00
Roxy-3D d30e478f97 Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761) 2017-05-16 15:24:24 -05:00
oldmcg 5a9e52a3e0 Use COPY_XYZE macro to copy exactly 4 elements (#6758) 
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
 2017-05-16 11:47:51 -05:00
Roxy-3D 8606644343 M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757) 
* Fix M48 for Delta's  There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.

* Check if the specified G29 command requires homing
 2017-05-16 11:23:50 -05:00
Tannoo 0cd398c25d UBL Menu Updates (#6751) 
Things should be pretty stable for a while.   
But it wouldn't surprise me if the Delta people have a need for a few special commands.
 2017-05-16 08:45:31 -05:00
Johann Delahayes a5737cba7c Update french language 2017-05-16 12:27:42 +02:00
Scott Lahteine 0fef9a2983 Remove "ubl." prefix from calls within ubl method 2017-05-16 01:19:45 -05:00
Scott Lahteine 14a4257c7b UBL tabs, whitespace, spelling, etc. 2017-05-16 01:19:45 -05:00
Scott Lahteine 56e2e331ed UBL G29: replace 'O' with 'T' 
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
 2017-05-16 01:18:41 -05:00
Scott Lahteine 091f94a6bf Fix up M421 and some comments 2017-05-16 01:14:03 -05:00
Scott Lahteine 4ec4ecff1a Reduce find_closest_mesh_point_of_type a little 2017-05-16 01:14:03 -05:00
Scott Lahteine f1a1c6873e Patch lcd_implementation_status_screen compiler warning 2017-05-16 00:59:50 -05:00
moebyusDev 2266c0780d fixed spanish lang 
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
 2017-05-16 00:35:36 -05:00
oldmcg b213a45efb UBL_DELTA post merge cleanup (#6705) 
* UBL_DELTA post merge cleanup:
   fix fade_height, lost during some previous merge
   fix float cx,cy which are not const
   move repeated z_cxcy calc line inside loop
   style fixes and comment fixes/alignment

* Update ubl_motion.cpp

remove unnecessary parentheses

* Update Conditionals_post.h

Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
 2017-05-16 00:30:29 -05:00
Roxy-3D 6f86c46fa6 Fix typo that caused scope issues for DELTA (#6750) 2017-05-15 23:13:45 -05:00
Roxy-3D 1fbcbc05f6 UBL no longer flout's the sacred GCode standard (#6745) 
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
 2017-05-15 16:25:01 -05:00
Scott Lahteine c262ea92e0 Merge pull request #6733 from abusca/Euskera 
Updated Basque translation
 2017-05-15 02:30:11 -05:00
Scott Lahteine 267f77b18b More constraint on axis_unhomed_error 2017-05-14 16:03:02 -05:00
Aaron Busca 645096b87a Updated Basque translation 
Updated Basque translation with new strings.
 2017-05-14 18:29:50 +02:00
Roxy-3D 40d95a4e23 Update the gMax files to display better with Proportional Fonts (#6727) 
Update the gMax files to display better with Proportional Fonts
 2017-05-13 16:33:04 -05:00
Roxy-3D c06af63f87 G26's default behaviour ought to be the entire mesh (#6726) 
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.

It is more natural for the unsophisticated user to just do the entire mesh (bed).   We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
 2017-05-13 15:53:44 -05:00
Roxy-3D 15040821e0 Setup FolgerTech-i3-2020 files better for the user (#6724) 
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine.  But we want it 'Right'.

Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
 2017-05-13 15:14:03 -05:00
Scott Lahteine 67c9b1e332 Update M665 comment, fix M665 code_value code. 2017-05-13 05:11:29 -05:00
Scott Lahteine 37399e3cb5 Fix prepare_move_to_destination_cartesian for UBL 2017-05-13 04:13:19 -05:00
Scott Lahteine a7fb55ea6d Use GRID_MAX_POINTS. Some formatting 2017-05-12 06:57:19 -05:00
Scott Lahteine e51b5774db Merge pull request #6699 from mtowara/patch-1 
Bugfix PRINTER_EVENT_LEDS
 2017-05-12 05:58:25 -05:00