Commit graph

1435 commits

Author SHA1 Message Date
Scott Lahteine d309a9647d Include probe offset for moving "close to the bed" 2016-08-19 04:45:33 -05:00
Scott Lahteine 35a08eeaeb Use Z_HOME_DIR over axis_home_dir where we can 2016-08-19 04:45:32 -05:00
Scott Lahteine 55355a4fb8 Make probed points more symmetrical 2016-08-19 04:32:03 -05:00
Scott Lahteine 1f776f6034 Tweak some code comments 2016-08-19 04:32:02 -05:00
Scott Lahteine 748228cf40 Use named indices for delta_grid_spacing 2016-08-19 04:32:02 -05:00
Scott Lahteine ead333e7da line_to_axis_pos => do_homing_move 2016-08-19 04:32:02 -05:00
Scott Lahteine 7a4ccd7967 Add do_probe_move with Z fixes 2016-08-19 04:32:02 -05:00
Scott Lahteine a1bad589c9 Augment debug/homing logging 2016-08-19 04:32:02 -05:00
Scott Lahteine 41b5c48129 Update software endstops if EEPROM is loaded 2016-08-19 04:32:01 -05:00
Scott Lahteine 628dcbc764 extruder_multiplier => flow_percentage 2016-08-18 22:13:47 -05:00
Scott Lahteine d63b8e2b2b Additional details for I2C_SLAVE_ADDRESS 2016-08-15 19:27:53 -07:00
Scott Lahteine bd928a69ec Add request, capture, flush to TWIBus 2016-08-15 00:04:20 -07:00
Scott Lahteine 97e0aed304 Further refinements of TWIBus 2016-08-13 18:32:41 -07:00
Scott Lahteine 67f119d18b Add an i2c request handler 2016-08-11 18:09:18 -07:00
Scott Lahteine d6a7ca6553 Merge pull request #4584 from thinkyhead/rc_delta_cal_more
Use configured feedrates, center in DELTA_CALIBRATION_MENU
2016-08-11 14:04:05 -07:00
Scott Lahteine 52560e257f Merge pull request #4595 from thinkyhead/rc_i2c_slave
Add support for i2c slave address
2016-08-11 12:39:26 -07:00
Scott Lahteine cd496dd9bd do_blocking_move_to can't be 'inline', takes const ref args 2016-08-11 12:05:55 -07:00
Scott Lahteine dd75fca4d9 Make M155 / M156 a bit more flexible 2016-08-11 00:52:01 -07:00
Scott Lahteine a99ecf71d8 Add support for i2c slave address 2016-08-10 23:30:35 -07:00
Scott Lahteine b63d70b186 Fix serial output for MBL, M303 2016-08-10 18:49:52 -07:00
Scott Lahteine 45f67164b6 Simplify the delay in kill() 2016-08-08 21:49:34 -07:00
Scott Lahteine 367dad5902 Sanity check Z_DUAL_ENDSTOPS with DELTA 2016-08-07 17:08:41 -07:00
Scott Lahteine 7b2abe6fc8 Use steps_to_mm in extruder runout prevent 2016-08-07 00:28:52 -07:00
Scott Lahteine d320065320 Within Marlin, maintain most feed rates in mm/s 2016-08-07 00:28:52 -07:00
Scott Lahteine a00783c41f Format probe stowed test code 2016-08-06 14:31:07 -07:00
AnHardt f37e8a31d7 Make Allen Key Probe stow
by switching off the tests for the probe before the stow move.
2016-08-06 14:30:38 -07:00
Scott Lahteine 938e6d15c4 Patch up some flaws, here and there 2016-08-05 08:17:37 -07:00
Scott Lahteine 7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
Scott Lahteine 445458c221 Don't include zprobe_zoffset in do_probe_raise 2016-08-03 21:12:02 -07:00
Scott Lahteine b73203a0b7 Move some includes around to uncover missing deps 2016-08-02 19:37:46 -07:00
Scott Lahteine 0f030aface Merge pull request #4503 from AnHardt/fix-retract
Correct typo in retract()
2016-08-02 15:04:55 -07:00
Scott Lahteine 330f82971b Buzzer requires BEEPER_PIN 2016-08-02 14:05:37 -07:00
AnHardt 39c4603598 Correct typo in retract. 2016-08-02 21:06:08 +02:00
Scott Lahteine 6eed37aafb Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine 4bf3526d00 Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine 63fd1f49a6 PID_EXTRUSION_SCALING, disabled by default 2016-07-31 17:49:34 -07:00
Scott Lahteine f388beafa1 Merge pull request #4476 from otvald/RCBugFix
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Thomas Otvald Jensen fe059f1221 During homing, line_to_axis_pos will make a path which moves across the
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!

Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj bd73e6d3c8 Fix for PR #4452 (Additional heater-state output changes)
・Add missing ';'
2016-07-30 22:49:30 +09:00
Scott Lahteine bdac2eb13a Don't set non-existent SLED_PIN 2016-07-30 04:17:21 -07:00
Scott Lahteine 8e2f095dde Merge pull request #4456 from jbrazio/speaker-type3
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine 9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine db4d03bc81 Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine 844a4e799e Account for DELTA in Planner::refresh_positioning 2016-07-29 18:41:11 -07:00
AnHardt 7188ce0ad6 double bump probing as a feature
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine e1970b4b28 Show power output in same order as temp output 2016-07-29 14:55:22 -07:00
Scott Lahteine 74df828acc Show ADC values inline rather than after 2016-07-29 14:55:18 -07:00
João Brázio 2b5faa61e2 Consolidates Buzzer and Speaker into a single object 2016-07-29 19:25:39 +01:00
Scott Lahteine b40661cb18 Fix output of heater states 2016-07-28 17:40:01 -07:00
Scott Lahteine 8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
Scott Lahteine 5272147f7c Followup #4402 fixing 3-point leveling 2016-07-25 15:56:34 -07:00
Scott Lahteine 169c21b477 Merge pull request #4402 from thinkyhead/rc_consistent_positioning
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine 2595a40a61 Account for coordinate space more in G28 / G29 / M48 2016-07-24 18:34:05 -07:00
Scott Lahteine b7b7c90477 Merge pull request #4389 from thinkyhead/rc_optimize_planner
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine b183442c61 Fix inactive_extruder_x_pos for coordinate space 2016-07-24 17:20:36 -07:00
Scott Lahteine f75b0c2ee1 Make POSITION macros global 2016-07-24 17:20:36 -07:00
Scott Lahteine 101b60ef42 Tweak Dual X Carriage data spacing 2016-07-24 17:20:35 -07:00
Scott Lahteine d8f2876753 Replace some float division with multiplication 2016-07-24 13:27:50 -07:00
Scott Lahteine f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
Scott Lahteine db5df9500b Move sync_plan_position closer to the top 2016-07-24 13:27:49 -07:00
João Brázio 50fb0f7cec M31 serial output is now always in EN 2016-07-24 15:52:03 +01:00
João Brázio 62d96d72f3 Renamed timestamp_t to duration_t 2016-07-24 03:16:02 +01:00
Scott Lahteine bb93b6822a Use set_current_from_steppers_for_axis 2016-07-23 15:25:54 -07:00
AnHardt 96a162beda Use implications from #4370 in run_z_probe()
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine 4e67a85a5d Macros to loop over axes 2016-07-23 13:09:28 -07:00
esenapaj 784be56e99 Follow-up the PR #4353 (General cleanup: enum)
・Update description of M111
2016-07-24 00:53:35 +09:00
Scott Lahteine 08459a003f Undo the self-sabotage that is do_blocking_move_to_axis_pos 2016-07-23 00:59:11 -07:00
esenapaj d32c4056ad Fix for the PR #4379 (Additional logging of do_blocking_move_to)
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine 8099ee51a5 Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine ad16d5019e Additional logging of do_blocking_move_to 2016-07-22 23:53:08 -07:00
Scott Lahteine 652fd8a826 Merge pull request #4362 from thinkyhead/rc_duplication_mode
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine 6da3729531 Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
Scott Lahteine b3eb0c8569 Add LOGICAL_POSITION macro, apply to kinematics 2016-07-22 18:38:13 -07:00
Scott Lahteine 35a610abf9 const arg to inverse_kinematics 2016-07-22 17:42:48 -07:00
Scott Lahteine b6afa028f4 Don't call adjust_delta on SCARA 2016-07-22 16:36:34 -07:00
Scott Lahteine d5e2d523c7 Generalize kinematics function names 2016-07-22 16:36:34 -07:00
Scott Lahteine 9c4ad7d7ef Clean up delta declarations in Marlin_main.cpp 2016-07-22 16:36:33 -07:00
Scott Lahteine 4b1725628b Move kinematic functions to "private" scope 2016-07-22 16:36:33 -07:00
Scott Lahteine cde068ea42 Use set_current_from_steppers in quickstop_stepper 2016-07-22 16:36:33 -07:00
Scott Lahteine 9f30cc84ce Use set_current_from_steppers for other kinematics 2016-07-22 16:36:33 -07:00
AnHardt 5db9b940ee Use forwardKinematics in DELTA run_z_probe() 2016-07-22 16:36:33 -07:00
Scott Lahteine cbc7f22ad9 Implement DUAL_NOZZLE_DUPLICATION_MODE 2016-07-22 16:23:58 -07:00
Scott Lahteine 179e091473 Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt 499e404fbf forwardKinematics for Delta printers 2016-07-22 16:01:51 -07:00
João Brázio 23043a1e05 Rework some code to use timestamp_t struct (saves 72 bytes) 2016-07-22 15:53:31 -07:00
Scott Lahteine 0b2c608d2f Merge pull request #4372 from jbrazio/gcc-bark
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine 311c7dadb6 Cleanup do_blocking_move_to for DELTA 2016-07-22 14:18:45 -07:00
Scott Lahteine b78590e63d Patch and cleanup run_z_probe 2016-07-22 14:18:45 -07:00
João Brázio 2f7716987d Fix minor gcc warning 2016-07-22 16:08:56 +01:00
AnHardt 376a57232e DELTA do_blocking_move_to() more like the Chartesian one 2016-07-22 03:12:46 +02:00
AnHardt 6ef26a85d8 Back to the differences method in run_z_probe() 2016-07-21 18:16:38 +02:00
Scott Lahteine 16e5348659 Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine d2e9a9c188 Always switch to tool 0 for G28 2016-07-20 09:36:55 -07:00
Scott Lahteine 194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
Unify run_z_probe
2016-07-19 19:02:39 -07:00
AnHardt 09a3cc33e6 Unify run_z_probe
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine 204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
João Brázio 47fef80848 Nozzle::clean() no longer requires HAS_BED_PROBE 2016-07-19 15:07:02 -07:00
Scott Lahteine 6c899bb520 Merge pull request #4349 from jbrazio/gcc-bark-bark
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine c502018eab Merge pull request #4353 from jbrazio/global-enum-file
General cleanup: enum
2016-07-19 13:37:56 -07:00