Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
2017-04-19 12:38:13 -05:00
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
2016-10-31 08:01:41 -05:00
Scott Lahteine
9cbedab91b
Use DPM where possible
2016-10-26 18:38:32 -05:00
Scott Lahteine
9dfd029911
Fix bug in fastio.h _GET_TIMER
2016-10-26 17:51:25 -05:00
Scott Lahteine
e6164d254d
Clean up GCode command short comments
2016-10-05 06:13:30 -05:00
Scott Lahteine
9d86c07702
Clean up some fastio.h spacing
2016-09-25 06:33:37 -05:00
Scott Lahteine
ab84ed22ca
No such thing as G6 and G7 pins
2016-09-25 05:28:22 -05:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
Scott Lahteine
9bdab4f3a8
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
Scott Lahteine
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
...
Keep "astyled" reformatting
2015-10-03 22:02:45 -05:00
Scott Lahteine
c065da52ec
Spacing and spelling
2015-04-03 22:54:48 -07:00
Scott Lahteine
c37f7d15c9
- Rename WRITE_E_STEP for consistency
...
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
2015-03-14 04:28:22 -07:00
Scott Lahteine
dfb38874f8
Some suggested changes for #1555
2015-03-03 00:48:20 -08:00
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
2014-02-25 09:52:58 +00:00
David Forrest
e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
2014-01-16 11:23:29 -05:00
Erik van der Zalm
bca353cc12
Fixed duplicate define in fastio.h
2013-10-03 19:24:53 +02:00
Steve Kelly
b42d24e31e
add additional pins to avr2560 for rambo lcd
2013-08-03 11:37:12 -05:00
Scott Lahteine
5dabc95409
Apply all changes from latest Marlin_V1
...
Diffed and merged, preserving my updates
2013-06-06 15:49:25 -07:00
Johann Rocholl
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
2012-12-08 15:16:38 -08:00
Johann Rocholl
ce4b5bbeaa
Add AT90USB646 support from Sprinter to fastio.h.
2012-12-08 10:45:58 -08:00
daid303
7a02ba361c
Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day.
2012-11-12 09:24:28 +01:00
Christian Thalhammer
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
2012-02-13 13:07:55 +01:00
Erik van der Zalm
9173a5713b
Teensylu support.
2012-02-09 19:27:45 +01:00
Christian Thalhammer
59cc5f889e
- added support for ATMega1284P
2012-02-06 11:55:56 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard Kubicek
40e8081623
changed end of line to windows, which seems to be the majority of developers main platform.
2011-11-05 14:19:57 +01:00
Bernhard Kubicek
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
2011-11-05 14:13:20 +01:00
Erik van der Zalm
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
2011-11-04 18:02:56 +01:00
Erik van der Zalm
750f6c33e3
first commit
2011-08-12 22:28:35 +02:00
