Scott Lahteine
abea6d5787
Tweak some lambdas
2020-03-18 10:33:15 -05:00
thinkyhead
252178fe62
[cron] Bump distribution date (2020-03-18)
2020-03-18 00:04:28 +00:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Joe Prints
1f5824247f
More decimal places for babystep / Z probe offset ( #17195 )
2020-03-17 15:12:52 -05:00
Scott Lahteine
e8205af6fb
Apply HAS_TMC_UART to pins files
2020-03-17 15:06:01 -05:00
Karl Andersson
e5dcab8fd2
ARMED support for TMC UART, probe temp ( #17186 )
2020-03-17 15:05:12 -05:00
ellensp
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin ( #17191 )
2020-03-17 14:51:57 -05:00
thinkyhead
c1672220fd
[cron] Bump distribution date (2020-03-17)
2020-03-17 00:04:33 +00:00
Scott Lahteine
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 ( #17187 )
2020-03-16 17:49:33 -05:00
Scott Lahteine
b14c933171
LPC1768 EEPROM fallback to flash, add overrides ( #17184 )
2020-03-16 15:59:05 -05:00
Pascal de Bruijn
2fc0df1b39
Shorter LCD remaining time to prevent overlap ( #17181 )
2020-03-16 14:11:55 -05:00
thinkyhead
a662079cbc
[cron] Bump distribution date (2020-03-16)
2020-03-16 00:04:45 +00:00
InsanityAutomation
775a4294fc
Configurable SLOWDOWN divisor ( #17171 )
2020-03-15 18:29:18 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line ( #17175 )
2020-03-15 18:23:24 -05:00
Scott Lahteine
c39873759f
Fix Z after ABL Bilinear G29 with fade
...
Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>
2020-03-15 18:18:38 -05:00
Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot ( #17170 )
2020-03-15 18:03:10 -05:00
Scott Lahteine
695e014075
Do later mounting of LCD-based SD
2020-03-14 19:24:35 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
Scott Lahteine
41ffe9851d
Fix LCD progress bar
...
Fixes #17162
2020-03-14 19:24:33 -05:00
thinkyhead
5c1970a229
[cron] Bump distribution date (2020-03-15)
2020-03-15 00:04:39 +00:00
Roxy-3D
9f85165101
Allow Tool Offset adjustments to have another digit of precision
...
Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough. So the edit menu is switched to float52 to fix the issue.
2020-03-14 18:12:29 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae
Fix G26 corrupted position
2020-03-13 19:27:02 -05:00
thinkyhead
983a8cee45
[cron] Bump distribution date (2020-03-14)
2020-03-14 00:04:00 +00:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7
M0 Q preserve status
2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382
Fix end of short (auto0.g) prints
2020-03-13 13:59:17 -05:00
Scott Lahteine
81b0548518
Fix Emergency Parser stuck state
2020-03-13 13:59:17 -05:00
Erkan Colak
aa32c47fb5
Shorten German BLTouch menu item names ( #17151 )
2020-03-13 12:34:03 -05:00
nick-diel
7070ea0b49
Add OnPidTuning event to Malyan LCD ( #17143 )
...
All ExtUI LCDs need to keep up with ExtUI API changes.
2020-03-12 19:48:33 -05:00
Scott Lahteine
59cb1466b7
Fix DUGS / DGUS typo
2020-03-12 19:30:18 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
Jason Smith
4e96a014a8
Use arduinoststm32 3.x for FYSETC S6 ( #17131 )
2020-03-12 19:20:22 -05:00
thinkyhead
8c11ecaf73
[cron] Bump distribution date (2020-03-13)
2020-03-13 00:04:16 +00:00
thinkyhead
1f55986ed2
[cron] Bump distribution date (2020-03-12)
2020-03-12 00:04:11 +00:00
Scott Lahteine
318a16637b
Fix M810 macro multiple use
...
Fixes #17125
2020-03-11 17:15:39 -05:00
BigTreeTech
8bad6e11e2
Fix STM32 _WRITE macro parameter ( #17121 )
2020-03-11 16:42:28 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types ( #17127 )
2020-03-11 16:41:18 -05:00
Scott Lahteine
924fa6045c
Non-const REMEMBER needed for RESTORE
2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
George Fu
201c991cfa
Fix and update DGUS displays ( #17072 )
2020-03-11 03:40:30 -05:00
Jamie
23c5701178
Apply soft limits to joystick jogging ( #17114 )
2020-03-10 22:59:49 -05:00
Scott Lahteine
eb6c992bfb
Announce SD file open
...
Requested in #17110
2020-03-10 22:54:19 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage ( #17101 )
2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting ( #17082 )
2020-03-10 19:42:57 -05:00
