msutas
e0beb98fd3
Improvement - G29 Option for Not Retracting Servo
...
This change introduces an improvement to G29 command on Marlin.
Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.
G29 command does the auto bed probing as it is.
G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.
Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
2015-01-10 17:25:39 +02:00
Bo Herrmannsen
1d4af46496
Merge pull request #1348 from stv0g/LogoLCD
...
Adding new Marlin to splash screen
2015-01-10 16:08:03 +01:00
Steffen Vogel
69dc411ae0
Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD
...
Conflicts:
Marlin/dogm_lcd_implementation.h
2015-01-10 14:57:11 +01:00
Steffen Vogel
d74394369b
Merge pull request #1343 from thinkyhead/dogm_progress_bar
...
DOGLCD and LCD_PROGRESS_BAR to coexist
2015-01-10 11:37:15 +01:00
Scott Lahteine
326b925557
DOGLCD and LCD_PROGRESS_BAR to coexist
...
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
2015-01-09 18:16:56 -08:00
Steffen Vogel
6e8e9bb41e
added link to IRC web chat, archive and mailing list
2015-01-09 22:28:47 +01:00
Bo Herrmannsen
5b4daf2669
removed hangout... only one asked for it
2015-01-09 22:08:36 +01:00
Erik van der Zalm
1aade4a8e2
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development
2015-01-09 21:33:29 +01:00
Erik van der Zalm
8a2e84e3f1
Possible fix for FWRETRACT with 0 zlift.
2015-01-09 21:33:02 +01:00
Steffen Vogel
905aab3b85
added missing #endif
2015-01-09 20:23:38 +01:00
Steffen Vogel
b9cf1465a7
updated LCD bouts with new strings and bitmaps
...
new version is pretty generic and should work in most scenarios
2015-01-09 18:49:59 +01:00
Steffen Vogel
c7632be5cc
added high and low resolutions version of splash screen logo (saving code size)
2015-01-09 18:49:24 +01:00
Steffen Vogel
8f0dba7cbf
adding string for bouts splash string to config
2015-01-09 18:48:30 +01:00
Steffen Vogel
eafa98e6f4
added two black/white versions of the Marlin Logo for the LCD
...
splashscreen
2015-01-09 17:52:23 +01:00
Bo Herrmannsen
d94109e886
updated logo post and ver info
2015-01-09 15:51:15 +01:00
Bo Herrmannsen
cd33b5b062
changed logo and ver info
...
logo is now 110 pixels wide and starts 9 pixels in from top left corner and also 9 pixels down from same corner... this will give a 9 pixel border all way round
ver info is placed centered and there is a 9 pixel from bottom of display to ver info
2015-01-09 15:44:47 +01:00
Bo Herrmannsen
9b6c1cfda6
removed unneeded lines in welcome msg
2015-01-09 15:20:41 +01:00
Bo Herrmannsen
ffa09f86f4
moved ver info 5 spaces to the right
2015-01-09 13:31:23 +01:00
Alex Borro
2bbb68be8a
Fix calculation of BAL grid fitting into the bed
...
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.
So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
2015-01-09 10:17:33 -02:00
Bo Herrmannsen
590caafa2d
changed ver info
2015-01-09 13:17:08 +01:00
Bo Herrmannsen
3bb9b31515
changed boot logo a bit to test if fat wall goes away
2015-01-09 12:51:21 +01:00
Bo Herrmannsen
47881574ed
Merge pull request #1336 from stv0g/Documentation
...
Documentation restructuring
2015-01-08 20:35:45 +01:00
Steffen Vogel
26337a56cc
Merge branch 'Documentation' of github.com:stv0g/Marlin into Documentation
2015-01-08 20:02:56 +01:00
Steffen Vogel
eaa462279e
Merge branch 'Development' of github.com:MarlinFirmware/Marlin into Documentation
...
Conflicts:
README.md
2015-01-08 20:02:40 +01:00
Steffen Vogel
6712179502
updated milestone link
2015-01-08 19:57:09 +01:00
Steffen Vogel
6dc9e87b68
added missing bracket
2015-01-08 19:55:33 +01:00
Steffen Vogel
38669a56cb
updated credits
2015-01-08 19:54:46 +01:00
Steffen Vogel
49b759b804
added credits
2015-01-08 19:48:56 +01:00
Steffen Vogel
6388be0731
reformatting
2015-01-08 19:38:52 +01:00
Steffen Vogel
c98d87935a
reformatting
2015-01-08 19:37:36 +01:00
Steffen Vogel
11a42c3215
fixed formatting issue
2015-01-08 19:26:23 +01:00
Steffen Vogel
d19ef56199
started hardware list
2015-01-08 19:21:57 +01:00
Steffen Vogel
bc91167363
moved licence to Documentation (its linked from the frontpage) to get a cleaner top level dir
2015-01-08 18:59:40 +01:00
Steffen Vogel
fd68d0074b
added missing gcodes description
2015-01-08 18:59:40 +01:00
Steffen Vogel
cf88d61c20
added links to reprap.org and the license
2015-01-08 18:59:40 +01:00
Steffen Vogel
4a1f34c522
added logo to README
2015-01-08 18:58:57 +01:00
Steffen Vogel
e351eec169
added logo for GitHub Readme
2015-01-08 18:58:08 +01:00
Steffen Vogel
6f137bbe3e
updated compilation/configuring instructions
2015-01-08 18:58:08 +01:00
Steffen Vogel
5db6ffc03e
fixed line endings
2015-01-08 18:58:08 +01:00
Steffen Vogel
abea094f90
fixed hyperlinks
2015-01-08 18:57:33 +01:00
Steffen Vogel
04eafe3d04
splitted huge README.md in several sections and moved them to the
...
Documentation directory
2015-01-08 18:55:32 +01:00
Erik van der Zalm
a06700a14b
Revert "issue 968 for dev branch"
2015-01-08 18:54:06 +01:00
andrewsil1
489b4fd3a5
Fix grammar/typos in new Configuration.h option
...
(For the SLOW_PWM_HEATERS option)
2015-01-08 18:54:06 +01:00
Bo Herrmannsen
fdf9dbb6fe
added link to google hangout
2015-01-08 18:54:06 +01:00
Steffen Vogel
da192c521f
Merge pull request #1333 from andrewsil1/development
...
Fix grammar/typos in new Configuration.h option
2015-01-08 00:34:01 +01:00
Erik van der Zalm
0f5cccca4f
Merge pull request #1334 from MarlinFirmware/revert-1311-Development
...
Revert "issue 968 for dev branch"
2015-01-07 23:41:10 +01:00
Erik van der Zalm
3a30d45c2e
Revert "issue 968 for dev branch"
2015-01-07 23:40:17 +01:00
andrewsil1
269ec9f87f
Fix grammar/typos in new Configuration.h option
...
(For the SLOW_PWM_HEATERS option)
2015-01-07 12:41:09 -08:00
Bo Herrmannsen
3d2b471c1a
added link to google hangout
2015-01-07 21:05:28 +01:00
Steffen Vogel
72912851b8
Merge pull request #1331 from stv0g/Development
...
moved/renamed documentation stuff to top-level directory
2015-01-07 15:50:24 +01:00
