koldo artola
e5b70237c7
Added new language (Basque-Euskera)
...
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
2014-04-13 22:19:38 +02:00
nothinman
086ff1644f
Merge pull request #852 from pixatintes/patch-1
...
Update language.h
2014-04-13 00:46:17 +01:00
nothinman
3ffc9651b1
Merge pull request #845 from DerSchultze/Sanguinololu-servo
...
Added servo pin assignments to Sanguinololu
2014-04-13 00:37:28 +01:00
nothinman
357b87b498
Merge pull request #826 from paciotti/patch-1
...
Configuration_adv.h
2014-04-13 00:22:25 +01:00
Gabe Rosenhouse
27a7cf9fcf
use existing strings
2014-04-07 05:01:48 -05:00
Gabe Rosenhouse
d3f305332a
Allowable range now includes default value
2014-04-06 19:45:56 -05:00
Gabe Rosenhouse
b0aeac117f
Adjustable Z probe offset, via custom M-code
2014-04-06 19:45:56 -05:00
nothinman
c23376f2e7
Merge pull request #837 from whosawhatsis/fwretract
...
FWRETRACT in mm/s
2014-04-04 11:47:58 +01:00
nothinman
dfb98101e4
Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible)
2014-04-03 18:05:48 +01:00
nothinman
f1501317ca
Merge pull request #860 from drf5n/therm3950
...
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-04-02 18:29:57 +01:00
nothinman
9a5d23d96f
Merge pull request #866 from sakunamary/Marlin_v1
...
fix bug for dual extruders not working
2014-04-02 18:27:42 +01:00
nothinman
303ee67896
Merge pull request #864 from whosawhatsis/M200
...
fix bug in M200 with multiple extruders
2014-04-02 18:26:15 +01:00
Tim
8759508319
fix bug for dual extruders not working
...
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and E0 or E1 move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
2014-04-01 09:26:19 +08:00
whosawhatsis
a65564eef6
fix bug in M200 with multiple extruders
2014-03-30 11:42:22 -07:00
whosawhatsis
aeaf9b9312
fix bug in M200 with multiple extruders
2014-03-30 11:41:57 -07:00
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-03-26 23:41:10 -04:00
pixatintes
a3530d1141
Update language.h
...
Updated to latest version.
2014-03-23 18:06:48 +01:00
pixatintes
990e770e15
Update language.h
...
Added catalan language
2014-03-23 10:30:08 +01:00
Dim3nsioneer
c8cdd1fc6f
Bugfixes for language option 6 (russian)
2014-03-19 14:27:38 +01:00
Dim3nsioneer
7395dafc1e
semantic changes in language.h
2014-03-19 12:30:50 +01:00
Dim3nsioneer
fad2a60ce6
Corrections for preheat extension in language.h
2014-03-19 12:23:35 +01:00
Ralf Schultz
eecda434fb
Sanguinololu servo pins set default disabled
2014-03-18 08:25:20 +01:00
Dim3nsioneer
944ced87c5
Extended Preheat options
...
Preheat LCD menus base on code by D-Base
2014-03-17 18:37:46 +01:00
Ralf Schultz
06709ad60e
Added servo pin assignments to Sanguinololu
2014-03-17 15:45:13 +01:00
Dim3nsioneer
3906f27c46
Individual extruder flow rate
...
Extension of M221, Tune menu
2014-03-15 18:09:46 +01:00
ErikZalm
a00cec8b71
Merge pull request #833 from mattsch/optional_feedrate_multiplier
...
Add support for disabling encoder control for feedrate multiplier
2014-03-15 15:41:45 +01:00
whosawhatsis
aab61e63c3
FWRETRACT in mm/s
...
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.
I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
2014-03-14 15:17:28 -07:00
Matthew Schick
6cd85e6008
Add support for disabling encoder control for feedrate multiplier
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-03-12 18:13:50 -04:00
blddk
09af1b90b8
Added CHDK support
...
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:57:08 +01:00
blddk
765b2da3d4
Added CHDK support
...
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:52:33 +01:00
paciotti
881e348eed
Update Configuration_adv.h
...
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
2014-03-08 22:35:05 +01:00
Tommi Lamberg
15d1b8d719
Fixed finnish translation
...
- Fixed Few finnish transalations
- Removed duplicate contrast define
2014-03-05 14:02:52 +02:00
ErikZalm
7f76a0e064
Merge pull request #813 from drf5n/PID_DEBUG
...
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 17:31:48 +01:00
Erik van der Zalm
fcd8524b6e
Only increase EEPROM version for DELTA printers.
2014-02-26 17:29:27 +01:00
Jim Morris
8ea5665ee2
Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2014-02-26 00:19:28 -08:00
David Forrest
8c4377dd63
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 00:44:22 -05:00
ErikZalm
fde8c2c310
Merge pull request #807 from Cylindric3D/typofixes_upstream5
...
Various typo fixes #5 - only in comments, no code changes.
2014-02-25 18:49:41 +01:00
Cylindric
fdce91192e
Various typo fixes - only in comments, no code changes.
2014-02-25 10:01:15 +00:00
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
2014-02-25 09:52:58 +00:00
ErikZalm
fd4542f33a
Merge pull request #805 from whosawhatsis/M200
...
autretract fix
2014-02-24 22:35:08 +01:00
ErikZalm
e8291ed728
Merge pull request #802 from Makers-Tool-Works/Marlin_v1
...
Clarify which PID values to enter
2014-02-24 22:31:13 +01:00
ErikZalm
465b654d24
Merge pull request #797 from Cylindric3D/update_menu_plan
...
Update menu plan
2014-02-24 22:30:19 +01:00
ErikZalm
88506a80c3
Merge pull request #789 from smiler/Marlin_v1
...
Fixed typo.
2014-02-24 22:26:31 +01:00
ErikZalm
b514d3c87f
Merge pull request #781 from Cylindric3D/typofixes_upstream
...
Various typo fixes #3 - only in comments, no code changes.
2014-02-24 22:25:38 +01:00
whosawhatsis
77df0d689a
autretract fix
...
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.
Conflicts:
Marlin/Configuration_adv.h
Marlin/Marlin_main.cpp
2014-02-24 13:24:38 -08:00
ErikZalm
cc5f1d475c
Merge pull request #772 from ellensp/Marlin_v1
...
Updated gen3+ board pins names to current convention
2014-02-24 22:22:15 +01:00
Cylindric
91759dede6
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-24 17:29:37 +00:00
Cylindric
557217fc05
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-24 17:29:24 +00:00
RoyOnWheels
aee63afccd
Clarify which PID values to enter
...
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
2014-02-23 14:36:50 -08:00
Gabe Rosenhouse
99f6326544
Remove unnecessary dependency on time.h from qr_solve.cpp
...
Fixed compiler errors on Ubuntu using arduino-core
2014-02-20 16:43:37 -08:00