Giuliano Zaro
7714152013
Update Italian language ( #15533 )
2019-10-13 17:28:03 -05:00
Bo Herrmannsen
5ad9257df4
Fix DUE HAL serial defines ( #15536 )
2019-10-13 17:06:15 -05:00
Krystian Booker
62aa137548
Fixed pid_autotune_menu made pid_label accessible ( #15551 )
2019-10-13 16:46:06 -05:00
Roxy-3D
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
Gustavo Alvarez
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
Roxy-3D
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file
...
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)
All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
2019-10-11 17:11:24 -05:00
Roxy-3D
c8e348731f
Correct Junction Deviation value for Formbot Raptors
...
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
2019-10-11 16:52:47 -05:00
Roxy-3D
7a1fa2177c
Eliminate multiple DEFAULT_ACCELERATION declarations.
...
Re-calculate and fix the Junction Deviation value using correct DEFAULT_ACCELERATION number.
2019-10-11 16:31:24 -05:00
Haxk20
1df90aaf0e
Followup to num2str update ( #15518 )
2019-10-11 08:45:15 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Scott Lahteine
5641adb01b
Clean up stray tabs
2019-10-10 20:16:16 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Roxy-3D
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Robby Candra
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
Robby Candra
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
Scott Lahteine
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
Scott Lahteine
13cf417a98
[cron] Bump distribution date
2019-10-10 00:00:04 -05:00
Scott Lahteine
541a9f2b85
Defer test of Lulzbot UI for now
2019-10-09 23:39:22 -05:00
ANMay-ru
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
Jason Smith
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine
a525cc06c1
Add ARC_SUPPORT to DUE tests
2019-10-08 20:46:01 -05:00
Scott Lahteine
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
Scott Lahteine
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
Luu Lac
e34aa1ff8f
Add A8, A8 Plus, A6 logos to configs ( #15489 )
...
Co-Authored-By: Leo <leo@nutz.de>
2019-10-08 15:33:24 -05:00
LinFor
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
Scott Lahteine
d45ab47139
[cron] Bump distribution date
2019-10-08 14:33:57 -05:00
Scott Lahteine
9dcccc11ba
Fix extra condition
2019-10-07 22:36:49 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
Scott Lahteine
cd791f1cba
Move long tests to the end
2019-10-07 19:41:15 -05:00
Scott Lahteine
59508edf64
Suppress data[] array warning
2019-10-07 19:32:23 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
chzj333
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
InsanityAutomation
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Tanguy Pruvot
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
