Commit graph

769 commits

Author SHA1 Message Date
jeffstaley 0da636e1a3 Set correct stepper direction on reset (#13032)
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Jiri 24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
InsanityAutomation f4d1f13358 Warn on cold extrusion, dont error 2019-01-24 00:16:14 -06:00
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Ludy dc65d96aca Fix TMC compile error (#12965) 2019-01-20 23:47:28 -06:00
Scott Lahteine 0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
teemuatlut 8a3f1d6932 Fix chopper timing struct and initialization (#12943) 2019-01-19 18:57:02 -06:00
Ludy acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine 712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
mikeshub 7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine 459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
Scott Lahteine 19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
HackingGulliver 1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Marcio Teixeira 6a8fb0f25f Simplify backlash compensation code. (#12813)
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
Marcio Teixeira 81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
TheLongAndOnly cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Marcio Teixeira 60cb36bef3 Misc. improvements (#12747)
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
Scott Lahteine 371d9a1acf Fix line-endings, formatting, whitespace
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy 135c74017c Fix compile DEBUG_EEPROM_READWRITE error (#12746) 2018-12-30 11:37:20 -06:00
Ludy 3877bf9704 Fix compile error with delta and sensorless homing (#12740) 2018-12-27 17:51:22 -06:00
Ludy cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
Roman Moravčík 594898aea7 Limit hotend / bed temperature to maxtemp-15 (#12713) 2018-12-27 11:46:05 -06:00
InsanityAutomation 367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Scott Lahteine 9d59a9c840 Followup to #12691 (typo) 2018-12-20 16:38:32 -06:00
Roman Moravčík 98cf546771 Limit set hotend temperature to maxtemp. (#12690) 2018-12-20 15:56:37 -06:00
Roman Moravčík 4dad489a50 [2.0.x] Limit PID autotune target to maxtemp-15 (#12691) 2018-12-20 15:55:30 -06:00
Marcio Teixeira 8dcc28c9ae Squelch warning mentioned in #11061 (#12676) 2018-12-20 15:34:24 -06:00
Luc Van Daele c6e09c2689 [2.0.x] G33 clean up (#12648)
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
teemuatlut 55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
Scott Lahteine 6cf8d40f41 Fix some serial echos of pin states 2018-12-09 02:38:32 -06:00
Scott Lahteine e8bda62d2a Followup to servo angles patch
Fix #12594
2018-12-08 15:31:59 -06:00
Marcio Teixeira b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
teemuatlut 50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine e874f9664c Tweaks to endstops code 2018-11-30 14:25:55 -06:00
Scott Lahteine 3c58b16c9f
Move stepper enable/disable to stepper_indirection.h (#12562) 2018-11-30 12:48:46 -06:00
Scott Lahteine aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Scott Lahteine c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Jacob Jordan 8be91677df Fix Skew factors (#12555)
- Ensure Skew factors are calculated from test square measurements
2018-11-29 11:39:31 -06:00
Scott Lahteine 03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine 95d154a91f Fans loop macro 2018-11-28 16:45:08 -06:00
Scott Lahteine 09d6db491a Fix wait_for_bed compile error 2018-11-25 18:05:41 -06:00
Scott Lahteine 29c53f2402 Hide some compile warnings 2018-11-23 21:07:38 -06:00
Scott Lahteine caca3c8503 Use wait_for_bed with WAIT_FOR_BED_HEATER
Addressing #12517
2018-11-23 20:39:23 -06:00
Sinisa Culic 8a0992d921 Fast PWM for controller fan (#12485) 2018-11-23 16:03:39 -06:00
Marcio Teixeira 4bcb63b705 Fix for #12482 (#12483)
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
2018-11-20 00:04:11 -06:00
Ludy 90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Ludy 1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00