Scott Lahteine
a0dadc8c62
Smaller I2CPositionEncoder strings
2019-02-12 16:21:56 -06:00
Scott Lahteine
18996d2595
Fix some spelling
2019-02-12 16:21:56 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8
Fix trailing whitespace
2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7
Fixed compilation with MMU2_MENUS disabled ( #13140 )
2019-02-12 12:55:49 -06:00
Ludy
584f9cd449
Update German language ( #13137 )
2019-02-12 12:54:57 -06:00
Scott Lahteine
d9a3fea022
Comments in HAL_spi_STM32F1.cpp
2019-02-11 18:06:33 -06:00
Giuliano Zaro
773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
2019-02-11 17:29:17 -06:00
Giuliano Zaro
f7efe6f6c5
[2.0.x] Fix TEMP_STAT_LED startup init ( #13120 )
2019-02-11 17:27:59 -06:00
Ludy
2bd6ce4b62
Update German language ( #13125 )
2019-02-11 17:08:21 -06:00
Giuliano Zaro
27115ff7eb
Update Italian language ( #13123 )
...
Incomplete.
2019-02-11 17:07:21 -06:00
Roman Moravčík
08a8bd10ca
Updated Slovak translation ( #13122 )
2019-02-11 17:06:10 -06:00
Scott Lahteine
3e2a4c3b26
Show mixer and temperature menus while printing
2019-02-11 16:52:47 -06:00
Scott Lahteine
8d271f20fe
C10mini E steps of 95
...
See https://www.patreon.com/posts/creality-cr10-24602624
2019-02-10 14:23:05 -06:00
Scott Lahteine
9737608f0a
Enable gradient when alias is cleared
2019-02-10 06:39:12 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
3983cacbcf
No extern needed for func decl
2019-02-10 05:38:27 -06:00
Scott Lahteine
43b29c093b
Update pinsDebug_list.h with XY PWM pins
2019-02-10 05:13:05 -06:00
Scott Lahteine
166e567ab8
Fix HAS_MOTOR_CURRENT_PWM
2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
Ludy
936f982392
Update German Language ( #13110 )
2019-02-10 03:55:08 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Scott Lahteine
5a316664e5
Update chopper timing
2019-02-10 03:12:20 -06:00
Scott Lahteine
fcb16ceb29
Update default config
2019-02-10 00:20:11 -06:00
Alain Martel
9ae7cca5e9
Disable RGB_LED for 3DFabXYZ ( #13097 )
2019-02-08 15:18:20 -06:00
Scott Lahteine
f3b6cb4d34
Clean up, update config comments
2019-02-08 15:13:52 -06:00
Scott Lahteine
ae03753ef1
Fix PCA9533 with PRINTER_EVENT_LEDS
2019-02-08 15:13:52 -06:00
Scott Lahteine
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
2019-02-08 14:54:34 -06:00
Scott Lahteine
6ddd81c178
[2.0.x] Update German Language ( #13100 )
...
add MMU2
2019-02-08 14:25:24 -06:00
Giuliano Zaro
7c9ff322f3
Update Italian language ( #13099 )
2019-02-08 14:23:37 -06:00
Ludy
ce8cb6a5d9
[2.0.x] Update German Language
...
add MMU2
2019-02-07 20:04:34 +01:00
Scott Lahteine
f269766408
Put the MMU2 menu with the others
2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
Marcio Teixeira
113af46a1b
Add ExtUI methods to babystep probe/nozzle offsets ( #12590 )
2019-02-06 07:16:54 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
Mark Zachmann
19cf72e057
Support individual solenoid disable with M381 ( #13008 )
2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp ( #13087 )
2019-02-06 06:31:31 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
2019-02-05 22:56:13 -06:00
Roxy-3D
ab6908a513
Fix Probe Offset bug...
2019-02-05 20:30:20 -07:00
revilor
69aaf5d096
MMU2 fixes ( #13082 )
2019-02-05 20:56:22 -06:00
Scott Lahteine
2f8e89adc3
Remove extraneous ui. prefixes
2019-02-05 19:04:37 -06:00
Scott Lahteine
870757aa17
Tweaks to pins_GT2560_V3.h
2019-02-04 22:52:50 -06:00
Scott Lahteine
b96cc30cd0
HAL spacing tweak
2019-02-04 21:51:06 -06:00
Scott Lahteine
9e394139e5
Followup to 90911104
2019-02-04 10:46:52 -06:00
Sam Lane
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
2019-02-04 07:43:09 -06:00
Ludy
691e925adc
Update German language ( #13012 )
2019-02-04 07:25:07 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed ( #13013 )
...
* M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
* Update queue.cpp
* Update queue.cpp
2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b
Allow M29 to be processed late
2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp
2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp
2019-02-04 07:11:08 -06:00
Andy Shaw
9091110460
LPC1768 - Don't change CS pin state ( #13015 )
2019-02-04 07:08:39 -06:00
Scott Lahteine
10d855cb21
Sanity check USER_GCODE formatting
2019-02-04 06:36:41 -06:00
Scott Lahteine
d97bb4c41c
Followup to e10943d0
2019-02-04 06:11:31 -06:00
jeffstaley
2f176d6fb8
Flush RX buffer on G-code line errors to prevent hang ( #13018 )
2019-02-04 06:03:49 -06:00
Scott Lahteine
ca73b2f465
Add static assert to catch errors in COPY(a,b)
2019-02-04 05:52:32 -06:00
Nathan
df1043516e
Fix the delta homing issue ( #12974 )
2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
e10943d0d8
Minor tweak to main menu
2019-02-04 04:58:31 -06:00
Scott Lahteine
d4d1b28a06
Fix some include paths
2019-02-04 03:57:15 -06:00
Scott Lahteine
0d720a6ff4
Tweak to emergency_parser.h
2019-02-04 03:56:56 -06:00
Scott Lahteine
0a7ea7063f
Hide Resume Print when not relevant
2019-02-04 03:02:44 -06:00
Scott Lahteine
afe79ba22b
Minor code cleanup
2019-02-04 02:23:06 -06:00
Scott Lahteine
fdb97a3e9c
Add class and macro to save and auto-restore a variable
2019-02-04 02:23:06 -06:00
Scott Lahteine
433518de74
Prevent M420 error from disconnecting OctoPrint
...
Just echo the error instead of labeling it `Error:`.
2019-02-04 01:54:43 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
Psycho
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
2019-02-04 00:15:08 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Scott Lahteine
ca1be02bf0
Tweak some pins formatting
2019-02-04 00:06:41 -06:00
Scott Lahteine
38c2ca9281
Clean up trailing whitespace
2019-02-03 23:00:57 -06:00
Mark Zachmann
4d1093b386
Fix init of last_direction_bits ( #13067 )
2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c
Drop E element from homing_feedrate_mm_s
2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
Marcio Teixeira
f6edd2c472
Move stepper settings to "Advanced Settings" menu ( #13063 )
2019-02-01 18:07:04 -06:00
InsanityAutomation
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
2019-02-01 18:06:02 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
Scott Lahteine
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
2019-01-30 22:17:17 -06:00
raTmole
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
2019-01-30 21:10:56 -06:00
InsanityAutomation
7d927b6691
Move Z Probe Z Offset from Advanced to basic Configuration ( #13056 )
2019-01-30 21:08:36 -06:00
Giuliano Zaro
31e213e427
Always show Tune sub-menu ( #13049 )
2019-01-30 21:05:55 -06:00
teemuatlut
f0503372d9
Revert E_AXIS_N cast ( #13055 )
2019-01-30 20:55:05 -06:00
InsanityAutomation
a1d03fe7ba
Fix single nozzle fan ( #13038 )
2019-01-30 20:54:04 -06:00
Scott Lahteine
159d7eefda
New boards entry for the A20M
2019-01-28 21:08:20 -06:00
Scott Lahteine
97da6c1da5
Use MIN/MAX for min/max
2019-01-28 20:36:13 -06:00
Scott Lahteine
17a8c37148
Label menu edit items
2019-01-28 20:20:46 -06:00
raTmole
ddeca7a358
Fix resume from power loss G-Code. ( #13035 )
2019-01-28 13:19:26 -06:00
Thomas Moore
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
2019-01-27 23:11:33 -06:00
Giuliano Zaro
a79d80c78e
Minor cleanup of pause code ( #13030 )
2019-01-27 23:10:25 -06:00
jeffstaley
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Scott Lahteine
3845baf398
Followup to #12982
2019-01-27 22:53:46 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
Scott Lahteine
621fbe99de
Followup to #12817
2019-01-27 20:48:58 -06:00
Marcio Teixeira
f214118e45
Action to notify host of filament runout. ( #12817 )
2019-01-27 20:18:05 -06:00
Scott Lahteine
aad770bce8
Bring default configs in sync
2019-01-26 16:44:42 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed
...
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650
Fix M29 for Pronterface SD card upload ( #13010 )
2019-01-24 21:10:59 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
Scott Lahteine
8f9b246d0e
Tweak some formatting, replace tabs
2019-01-24 13:18:56 -06:00
Bo Herrmannsen
808df82b36
Support for Anycubic I3 ( #12972 )
2019-01-24 12:40:49 -06:00
Scott Lahteine
ae91914260
Prevent name conflicts with mixed stepper drivers
2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd
Fix L6470 config comments
2019-01-24 00:58:16 -06:00
InsanityAutomation
f4d1f13358
Warn on cold extrusion, dont error
2019-01-24 00:16:14 -06:00
Scott Lahteine
aa74a900f5
Bring Rostock 301 and ArmEd configs up to date
2019-01-23 23:37:37 -06:00
Scott Lahteine
0f07ba4f09
Tweak some comments
2019-01-23 20:18:13 -06:00
Scott Lahteine
00cdd41b5f
Clean up for recent changes
2019-01-23 20:08:58 -06:00
Roman Moravčík
7d53b79596
Update Slovak translation ( #12991 )
2019-01-23 19:48:16 -06:00
Giuliano Zaro
18c32996c1
[2.0.x] Updated Italian language ( #12997 )
2019-01-23 19:35:42 -06:00
Bob Kuhn
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
2019-01-23 19:34:39 -06:00
Scott Lahteine
b4994ad12e
Update language_it.h
2019-01-23 19:28:57 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
Scott Lahteine
48a581ba2e
Tweak some HAL Due code
2019-01-23 00:53:20 -06:00
Marcio Teixeira
54fdf57b8c
ExtUI: Fix fan wrapping around from 0 to 100 ( #12987 )
2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07
Update language_en.h ( #12988 )
2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8
Fix TMC-related compile issues. ( #12971 )
...
- `STEALTHOP_[XYZE]` configuration options now set the default state.
2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
2019-01-20 23:52:51 -06:00
Ludy
dc65d96aca
Fix TMC compile error ( #12965 )
2019-01-20 23:47:28 -06:00
InsanityAutomation
a1cf49935d
Add laser control menu ( #12883 )
2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
2019-01-20 23:24:53 -06:00
Scott Lahteine
e1f951813a
Remove old block end comment
2019-01-20 02:30:03 -06:00
Scott Lahteine
52108192d1
Prevent L6470 class name conflict with drivers.h define
...
Fix #12824
2019-01-20 00:32:56 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
Scott Lahteine
4e5a915ef8
Fix some Makefile comments
2019-01-19 23:41:30 -06:00
Scott Lahteine
a5911765c3
Tweak some spacing
2019-01-19 20:27:57 -06:00
chrisly42
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364
Update some pins spacing
2019-01-19 19:21:52 -06:00
teemuatlut
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
2019-01-19 18:57:02 -06:00
Ludy
c6991109b7
Update German language ( #12953 )
2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a
Update Italian language ( #12951 )
2019-01-19 18:48:13 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
424aa05cc2
Fix some file endings
2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e
Various general cleanups
...
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
Scott Lahteine
02cc63d6d4
Update CreatorPro Configuration_adv.h
2019-01-19 16:37:50 -06:00
Marcio Teixeira
f4c16e683b
Follow up fixes to #12884 ( #12940 )
2019-01-17 18:48:29 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
Ziemowit
20c20dacb7
MKS SBASE needs DRV8825 ( #12911 )
2019-01-17 13:21:53 -06:00
Giuliano Zaro
7bb5d4bfe8
Small LED code reorganization ( #12929 )
2019-01-17 13:20:26 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
Bob Kuhn
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
2019-01-15 18:59:36 -06:00
Alain Martel
cdb562d558
Bring Migbot config up to date ( #12916 )
2019-01-15 18:53:07 -06:00
Giuliano Zaro
8f4c6e6d1a
Fix case light on boot ( #12919 )
2019-01-15 18:50:56 -06:00
Marcio Teixeira
f11c6d5d02
Fix M107 when dual-nozzles share fan ( #12819 ) ( #12909 )
2019-01-15 18:45:18 -06:00
Karl Andersson
64a4649290
STM32 - Fix SD write ( #12897 )
2019-01-15 18:44:22 -06:00
Ludy
294521439e
Clean up Configuration_adv.h ( #12900 )
2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe
Save some progmem ( #12913 )
2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf
Tweak SD section of Main Menu
2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3
Update comments on M125
2019-01-12 17:52:44 -06:00
Jason
dc4786a504
Config files for PowerWASP Printer ( #12889 )
2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0
Fix some HAL_STM32F1 type declarations
2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types ( #12892 )
2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212
Fix M24 not starting new job ( #12887 )
2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e
getStatus => report_status
2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767
Tweaks to TMC26XStepper
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059
Split bed size sanity check into two
2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9
Add RUMBA32 Board ( #12856 )
2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e
Use maths macros for ceil/floor
2019-01-05 21:21:02 -06:00
Ludy
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7
Remove obsolete test conditions ( #12829 )
2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b
Fix M106 extruder & fan count ( #12820 )
2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
jmz52
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
jmz52
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c
Followup to VORON
2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea
Remove unused Cheaptronic pins
2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
Ludy
74c47803f7
Add VORON printer ( #12705 )
2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75
Allow 4 fan animation frames ( #12772 )
2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Ludy
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c
Fix M106 with SINGLENOZZLE
2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37
Fix bad sanitycheck ( #12748 )
2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
2018-12-27 18:05:42 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c
Confirmation on Abort SD print ( #12717 )
2018-12-27 11:36:39 -06:00
Msq001
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
2018-12-27 10:52:35 -06:00
InsanityAutomation
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
2018-12-20 17:32:39 -06:00
Ludy
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Ludy
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
2018-12-20 16:42:15 -06:00
Scott Lahteine
9d59a9c840
Followup to #12691 (typo)
2018-12-20 16:38:32 -06:00
Ludy
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
2018-12-20 16:11:33 -06:00
Kadah
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
2018-12-20 16:10:49 -06:00
Roman Moravčík
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
2018-12-20 15:56:37 -06:00
Roman Moravčík
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
2018-12-20 15:55:30 -06:00
Marcio Teixeira
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
2018-12-20 15:34:24 -06:00
Ondřej Nový
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
2018-12-20 15:28:46 -06:00
Ondřej Nový
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
2018-12-18 13:35:59 -06:00
Ondřej Nový
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
2018-12-18 13:34:46 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
teemuatlut
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
2018-12-18 12:42:14 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
2018-12-12 16:59:20 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Ludy
97de9d54a5
Fix broken pins file include ( #12617 )
2018-12-09 19:06:03 -06:00
Ludy
a7b3a61424
Improve some config comments readability ( #12615 )
2018-12-09 19:02:42 -06:00
Scott Lahteine
daf07e4200
Align classic bed icon consistently
2018-12-09 12:00:10 -06:00
MasterPIC
3bb8b3529a
Center ABL grid on bed with H parameter. ( #12610 )
2018-12-09 11:24:48 -06:00
Scott Lahteine
6cf8d40f41
Fix some serial echos of pin states
2018-12-09 02:38:32 -06:00
Scott Lahteine
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check ( #12606 )
2018-12-08 23:34:26 -06:00
Scott Lahteine
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
2018-12-08 15:31:59 -06:00
Scott Lahteine
e8bda62d2a
Followup to servo angles patch
...
Fix #12594
2018-12-08 15:31:59 -06:00
Scott Lahteine
18fedafbc5
Refresh screen on SD Init
2018-12-08 15:31:59 -06:00
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
2018-12-08 14:36:46 -06:00
Scott Lahteine
fa47ce369a
Sanity-check for negative steps, feedrate, accel
2018-12-07 19:38:15 -06:00
Scott Lahteine
ef81b5f03e
Link to font docs in ultralcd_DOGM.cpp
2018-12-07 19:10:55 -06:00
Scott Lahteine
4388015f1a
Tweak config formatting
2018-12-07 16:57:14 -06:00
Scott Lahteine
b7e38ea249
Signal an invalid mesh for M420 enable / load
2018-12-07 16:14:11 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
9fbd73d931
Fix up some delta settings
2018-12-05 18:57:47 -06:00
Dave Johnson
0947b92734
Build and CI fixes and optimizations ( #12584 )
...
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad
2018-12-05 17:21:40 -06:00
