/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Conditionals_LCD.h
 * Conditionals that need to be set before Configuration_adv.h or pins.h
 */

#if ENABLED(CARTESIO_UI)

  #define DOGLCD
  #define ULTIPANEL
  #define DEFAULT_LCD_CONTRAST 90
  #define LCD_CONTRAST_MIN 60
  #define LCD_CONTRAST_MAX 140

#elif ENABLED(MAKRPANEL)

  #define U8GLIB_ST7565_64128N

#elif ENABLED(ZONESTAR_LCD)

  #define ADC_KEYPAD
  #define REPRAPWORLD_KEYPAD
  #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
  #define ADC_KEY_NUM 8
  #define ULTIPANEL

  // this helps to implement ADC_KEYPAD menus
  #define REVERSE_MENU_DIRECTION
  #define ENCODER_PULSES_PER_STEP 1
  #define ENCODER_STEPS_PER_MENU_ITEM 1
  #define ENCODER_FEEDRATE_DEADZONE 2

#elif ENABLED(RADDS_DISPLAY)
  #define ULTIPANEL
  #define ENCODER_PULSES_PER_STEP 2

#elif ENABLED(ANET_FULL_GRAPHICS_LCD)

  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

#elif ENABLED(BQ_LCD_SMART_CONTROLLER)

  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)

  #define ULTRA_LCD
  #define DOGLCD
  #define ULTIMAKERCONTROLLER

  #if ENABLED(miniVIKI)
    #define LCD_CONTRAST_MIN      75
    #define LCD_CONTRAST_MAX     115
    #define DEFAULT_LCD_CONTRAST  95
    #define U8GLIB_ST7565_64128N
  #elif ENABLED(VIKI2)
    #define LCD_CONTRAST_MIN       0
    #define LCD_CONTRAST_MAX     255
    #define DEFAULT_LCD_CONTRAST 140
    #define U8GLIB_ST7565_64128N
  #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
    #define LCD_CONTRAST_MIN      90
    #define LCD_CONTRAST_MAX     130
    #define DEFAULT_LCD_CONTRAST 110
    #define U8GLIB_LM6059_AF
    #define SD_DETECT_INVERTED
  #elif ENABLED(AZSMZ_12864)
    #define LCD_CONTRAST_MIN     120
    #define LCD_CONTRAST_MAX     255
    #define DEFAULT_LCD_CONTRAST 190
    #define U8GLIB_ST7565_64128N
  #endif

#elif ENABLED(OLED_PANEL_TINYBOY2)

  #define U8GLIB_SSD1306
  #define ULTIPANEL
  #define REVERSE_ENCODER_DIRECTION
  #define REVERSE_MENU_DIRECTION

#elif ENABLED(RA_CONTROL_PANEL)

  #define LCD_I2C_TYPE_PCA8574
  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
  #define ULTIPANEL

#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

  #define DOGLCD
  #define U8GLIB_ST7920
  #define ULTIPANEL

#elif ENABLED(CR10_STOCKDISPLAY)

  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  #ifndef ST7920_DELAY_1
    #define ST7920_DELAY_1 DELAY_NS(125)
  #endif
  #ifndef ST7920_DELAY_2
    #define ST7920_DELAY_2 DELAY_NS(125)
  #endif
  #ifndef ST7920_DELAY_3
    #define ST7920_DELAY_3 DELAY_NS(125)
  #endif

#elif ENABLED(MKS_12864OLED)

  #define REPRAP_DISCOUNT_SMART_CONTROLLER
  #define U8GLIB_SH1106

#elif ENABLED(MKS_12864OLED_SSD1306)

  #define REPRAP_DISCOUNT_SMART_CONTROLLER
  #define U8GLIB_SSD1306

#elif ENABLED(MKS_MINI_12864)

  #define MINIPANEL

#elif ENABLED(FYSETC_MINI_12864)

  #define DOGLCD
  #define ULTIPANEL
  #define DEFAULT_LCD_CONTRAST 255
  #define LED_COLORS_REDUCE_GREEN

#endif

#if EITHER(MAKRPANEL, MINIPANEL)
  #define DOGLCD
  #define ULTIPANEL
  #define DEFAULT_LCD_CONTRAST 17
#endif

#if ENABLED(ULTI_CONTROLLER)
  #define U8GLIB_SSD1309
  #define REVERSE_ENCODER_DIRECTION
  #define LCD_RESET_PIN LCD_PINS_D6 //  This controller need a reset pin
  #define LCD_CONTRAST_MIN 0
  #define LCD_CONTRAST_MAX 254
  #define DEFAULT_LCD_CONTRAST 127
  #define ENCODER_PULSES_PER_STEP 2
  #define ENCODER_STEPS_PER_MENU_ITEM 2
#endif

// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#define HAS_SSD1306_OLED_I2C ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#if HAS_SSD1306_OLED_I2C
  #define ULTRA_LCD
  #define DOGLCD
#endif

#if EITHER(PANEL_ONE, U8GLIB_SH1106)

  #define ULTIMAKERCONTROLLER

#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)

  #define REPRAP_DISCOUNT_SMART_CONTROLLER
  #define LCD_WIDTH 16
  #define LCD_HEIGHT 2

#endif

#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
  #define DOGLCD
  #define U8GLIB_ST7920
  #define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif

#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, ULTI_CONTROLLER)
  #define ULTIPANEL
#endif

#if ENABLED(REPRAPWORLD_KEYPAD)
  #define NEWPANEL
  #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
    #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
  #endif
#endif

/**
 * SPI PANELS
 */

 // Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
 #if ENABLED(U8GLIB_SH1106_EINSTART)
   #define ULTRA_LCD
   #define DOGLCD
   #define ULTIPANEL
   #define NEWPANEL
 #endif

 /**
  * FSMC/SPI TFT PANELS
  */
 #if ENABLED(MKS_ROBIN_TFT)
   #define ULTRA_LCD
   #define DOGLCD
   #define ULTIPANEL
 #endif

/**
 * I2C PANELS
 */

#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)

  #define LCD_I2C_TYPE_PCF8575
  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander

  #if ENABLED(LCD_SAINSMART_I2C_2004)
    #define LCD_WIDTH 20
    #define LCD_HEIGHT 4
  #endif

#elif ENABLED(LCD_I2C_PANELOLU2)

  // PANELOLU2 LCD with status LEDs, separate encoder and click inputs

  #define LCD_I2C_TYPE_MCP23017
  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (optional)
  #define ULTIPANEL

#elif ENABLED(LCD_I2C_VIKI)

  /**
   * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
   *
   * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
   * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
   * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
   *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
   */
  #define LCD_I2C_TYPE_MCP23017
  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
  #define ULTIPANEL

  #define ENCODER_FEEDRATE_DEADZONE 4

  #define STD_ENCODER_PULSES_PER_STEP 1
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 2

#elif ENABLED(G3D_PANEL)

  #define STD_ENCODER_PULSES_PER_STEP 2
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1

#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2, REPRAP_DISCOUNT_SMART_CONTROLLER)

  #define STD_ENCODER_PULSES_PER_STEP 4
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1

#endif

#ifndef STD_ENCODER_PULSES_PER_STEP
  #define STD_ENCODER_PULSES_PER_STEP 5
#endif
#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef ENCODER_PULSES_PER_STEP
  #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
  #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
#endif
#ifndef ENCODER_FEEDRATE_DEADZONE
  #define ENCODER_FEEDRATE_DEADZONE 6
#endif

// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#if ENABLED(FF_INTERFACEBOARD)
  #define SR_LCD_3W_NL    // Non latching 3 wire shift register
  #define ULTIPANEL
#endif

#if ENABLED(SAV_3DLCD)
  #define SR_LCD_2W_NL    // Non latching 2 wire shift register
  #define ULTIPANEL
#endif

#if ENABLED(ULTIPANEL)
  #define NEWPANEL  // Disable this if you actually have no click-encoder panel
  #define ULTRA_LCD
#endif

// Aliases for LCD features
#define HAS_SPI_LCD          ENABLED(ULTRA_LCD)
#define HAS_GRAPHICAL_LCD    ENABLED(DOGLCD)
#define HAS_CHARACTER_LCD   (HAS_SPI_LCD && !HAS_GRAPHICAL_LCD)
#define HAS_LCD_MENU        (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS))

#define HAS_ADC_BUTTONS     ENABLED(ADC_KEYPAD)

/**
 * Default LCD contrast for Graphical LCD displays
 */
#define HAS_LCD_CONTRAST HAS_GRAPHICAL_LCD && defined(DEFAULT_LCD_CONTRAST)
#if HAS_LCD_CONTRAST
  #ifndef LCD_CONTRAST_MIN
    #define LCD_CONTRAST_MIN 0
  #endif
  #ifndef LCD_CONTRAST_MAX
    #define LCD_CONTRAST_MAX 63
  #endif
  #ifndef DEFAULT_LCD_CONTRAST
    #define DEFAULT_LCD_CONTRAST 32
  #endif
#endif

/**
 * Extruders have some combination of stepper motors and hotends
 * so we separate these concepts into the defines:
 *
 *  EXTRUDERS    - Number of Selectable Tools
 *  HOTENDS      - Number of hotends, whether connected or separate
 *  E_STEPPERS   - Number of actual E stepper motors
 *  E_MANUAL     - Number of E steppers for LCD move options
 *
 */

#if EXTRUDERS == 0
  #undef DISTINCT_E_FACTORS
  #undef SINGLENOZZLE
  #undef SWITCHING_EXTRUDER
  #undef SWITCHING_NOZZLE
  #undef MIXING_EXTRUDER
  #undef MK2_MULTIPLEXER
  #undef PRUSA_MMU2
#endif

#if ENABLED(SWITCHING_EXTRUDER)   // One stepper for every two EXTRUDERS
  #if EXTRUDERS > 4
    #define E_STEPPERS    3
  #elif EXTRUDERS > 2
    #define E_STEPPERS    2
  #else
    #define E_STEPPERS    1
  #endif
  #if DISABLED(SWITCHING_NOZZLE)
    #define HOTENDS       E_STEPPERS
  #endif
#elif ENABLED(MIXING_EXTRUDER)
  #define E_STEPPERS      MIXING_STEPPERS
  #define E_MANUAL        1
  #define DUAL_MIXING_EXTRUDER (MIXING_STEPPERS == 2)
#elif ENABLED(SWITCHING_TOOLHEAD)
  #define E_STEPPERS      EXTRUDERS
  #define E_MANUAL        EXTRUDERS
#elif ENABLED(PRUSA_MMU2)
  #define E_STEPPERS 1
  #ifndef TOOLCHANGE_ZRAISE
    #define TOOLCHANGE_ZRAISE 0
  #endif
#endif

// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
  #undef DISABLE_INACTIVE_EXTRUDER
#endif

// Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
  #define SINGLENOZZLE
#endif

#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
  #undef HOTENDS
  #define HOTENDS       1
  #undef TEMP_SENSOR_1_AS_REDUNDANT
  #undef HOTEND_OFFSET_X
  #undef HOTEND_OFFSET_Y
#endif

#ifndef HOTENDS
  #define HOTENDS EXTRUDERS
#endif

#ifndef E_STEPPERS
  #define E_STEPPERS EXTRUDERS
#endif

#ifndef E_MANUAL
  #define E_MANUAL EXTRUDERS
#endif

#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)

#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)

#define HAS_HOTEND_OFFSET (HOTENDS > 1)
#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)

/**
 * DISTINCT_E_FACTORS affects how some E factors are accessed
 */
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
  #define XYZE_N (XYZ + E_STEPPERS)
  #define E_AXIS_N(E) (E_AXIS + E)
#else
  #undef DISTINCT_E_FACTORS
  #define XYZE_N XYZE
  #define E_AXIS_N(E) E_AXIS
#endif

/**
 * The BLTouch Probe emulates a servo probe
 * and uses "special" angles for its state.
 */
#if ENABLED(BLTOUCH)
  #ifndef Z_PROBE_SERVO_NR
    #define Z_PROBE_SERVO_NR 0
  #endif
  #ifndef NUM_SERVOS
    #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
  #endif
  #undef DEACTIVATE_SERVOS_AFTER_MOVE
  #if NUM_SERVOS == 1
    #undef SERVO_DELAY
    #define SERVO_DELAY { 50 }
  #endif
  #ifndef BLTOUCH_DELAY
    #define BLTOUCH_DELAY 375
  #endif

  // Always disable probe pin inverting for BLTouch
  #undef Z_MIN_PROBE_ENDSTOP_INVERTING
  #define Z_MIN_PROBE_ENDSTOP_INVERTING false
  #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
    #undef Z_MIN_ENDSTOP_INVERTING
    #define Z_MIN_ENDSTOP_INVERTING false
  #endif
#endif

#ifndef PREHEAT_1_LABEL
  #define PREHEAT_1_LABEL "PLA"
#endif

#ifndef PREHEAT_2_LABEL
  #define PREHEAT_2_LABEL "ABS"
#endif

/**
 * Set a flag for a servo probe
 */
#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)

/**
 * Set flags for enabled probes
 */
#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))

#if HAS_BED_PROBE
  #define USES_Z_MIN_PROBE_ENDSTOP DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  #ifndef Z_PROBE_LOW_POINT
    #define Z_PROBE_LOW_POINT -5
  #endif
  #if ENABLED(Z_PROBE_ALLEN_KEY)
    #define PROBE_TRIGGERED_WHEN_STOWED_TEST // Extra test for Allen Key Probe
  #endif
#else
  // Clear probe pin settings when no probe is selected
  #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#endif

#define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))

#ifdef GRID_MAX_POINTS_X
  #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
#endif

#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_RESUME_CONTINUE   ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
#define HAS_COLOR_LEDS        ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define HAS_LEDS_OFF_FLAG     (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
#define HAS_PRINT_PROGRESS    EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#define HAS_SERVICE_INTERVALS (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
#define HAS_FILAMENT_SENSOR   ENABLED(FILAMENT_RUNOUT_SENSOR)

#define Z_MULTI_STEPPER_DRIVERS EITHER(Z_DUAL_STEPPER_DRIVERS, Z_TRIPLE_STEPPER_DRIVERS)
#define Z_MULTI_ENDSTOPS        EITHER(Z_DUAL_ENDSTOPS, Z_TRIPLE_ENDSTOPS)
#define HAS_EXTRA_ENDSTOPS     (EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS)

#define HAS_GAMES     ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAME_MENU (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))

#define IS_SCARA     EITHER(MORGAN_SCARA, MAKERARM_SCARA)
#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
#define IS_CARTESIAN !IS_KINEMATIC

#ifndef INVERT_X_DIR
  #define INVERT_X_DIR false
#endif
#ifndef INVERT_Y_DIR
  #define INVERT_Y_DIR false
#endif
#ifndef INVERT_Z_DIR
  #define INVERT_Z_DIR false
#endif
#ifndef INVERT_E_DIR
  #define INVERT_E_DIR false
#endif

#if ENABLED(HOST_ACTION_COMMANDS)
  #ifndef ACTION_ON_PAUSE
    #define ACTION_ON_PAUSE   "pause"
  #endif
  #ifndef ACTION_ON_RESUME
    #define ACTION_ON_RESUME  "resume"
  #endif
  #ifndef ACTION_ON_PAUSED
    #define ACTION_ON_PAUSED  "paused"
  #endif
  #ifndef ACTION_ON_RESUMED
    #define ACTION_ON_RESUMED "resumed"
  #endif
  #ifndef ACTION_ON_CANCEL
    #define ACTION_ON_CANCEL  "cancel"
  #endif
  #if ENABLED(G29_RETRY_AND_RECOVER)
    #ifndef ACTION_ON_G29_RECOVER
      #define ACTION_ON_G29_RECOVER "probe_rewipe"
    #endif
    #ifndef ACTION_ON_G29_FAILURE
      #define ACTION_ON_G29_FAILURE "probe_failed"
    #endif
  #endif
#endif