/*---------------------------------------------------------------------------- * U S B - K e r n e l *---------------------------------------------------------------------------- * Name: CDC.h * Purpose: USB Communication Device Class Definitions * Version: V1.20 *---------------------------------------------------------------------------- * This software is supplied "AS IS" without any warranties, express, * implied or statutory, including but not limited to the implied * warranties of fitness for purpose, satisfactory quality and * noninfringement. Keil extends you a royalty-free right to reproduce * and distribute executable files created using this software for use * on NXP Semiconductors LPC family microcontroller devices only. Nothing * else gives you the right to use this software. * * Copyright (c) 2009 Keil - An ARM Company. All rights reserved. *---------------------------------------------------------------------------*/ #ifndef __CDC_H #define __CDC_H extern "C" { #include } #if defined ( __GNUC__ ) #define __packed __attribute__((__packed__)) #endif /*---------------------------------------------------------------------------- * Definitions based on usbcdc11.pdf (www.usb.org) *---------------------------------------------------------------------------*/ // Communication device class specification version 1.10 #define CDC_V1_10 0x0110 // Communication interface class code // (usbcdc11.pdf, 4.2, Table 15) #define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 // Communication interface class subclass codes // (usbcdc11.pdf, 4.3, Table 16) #define CDC_DIRECT_LINE_CONTROL_MODEL 0x01 #define CDC_ABSTRACT_CONTROL_MODEL 0x02 #define CDC_TELEPHONE_CONTROL_MODEL 0x03 #define CDC_MULTI_CHANNEL_CONTROL_MODEL 0x04 #define CDC_CAPI_CONTROL_MODEL 0x05 #define CDC_ETHERNET_NETWORKING_CONTROL_MODEL 0x06 #define CDC_ATM_NETWORKING_CONTROL_MODEL 0x07 // Communication interface class control protocol codes // (usbcdc11.pdf, 4.4, Table 17) #define CDC_PROTOCOL_COMMON_AT_COMMANDS 0x01 // Data interface class code // (usbcdc11.pdf, 4.5, Table 18) #define CDC_DATA_INTERFACE_CLASS 0x0A // Data interface class protocol codes // (usbcdc11.pdf, 4.7, Table 19) #define CDC_PROTOCOL_ISDN_BRI 0x30 #define CDC_PROTOCOL_HDLC 0x31 #define CDC_PROTOCOL_TRANSPARENT 0x32 #define CDC_PROTOCOL_Q921_MANAGEMENT 0x50 #define CDC_PROTOCOL_Q921_DATA_LINK 0x51 #define CDC_PROTOCOL_Q921_MULTIPLEXOR 0x52 #define CDC_PROTOCOL_V42 0x90 #define CDC_PROTOCOL_EURO_ISDN 0x91 #define CDC_PROTOCOL_V24_RATE_ADAPTATION 0x92 #define CDC_PROTOCOL_CAPI 0x93 #define CDC_PROTOCOL_HOST_BASED_DRIVER 0xFD #define CDC_PROTOCOL_DESCRIBED_IN_PUFD 0xFE // Type values for bDescriptorType field of functional descriptors // (usbcdc11.pdf, 5.2.3, Table 24) #define CDC_CS_INTERFACE 0x24 #define CDC_CS_ENDPOINT 0x25 // Type values for bDescriptorSubtype field of functional descriptors // (usbcdc11.pdf, 5.2.3, Table 25) #define CDC_HEADER 0x00 #define CDC_CALL_MANAGEMENT 0x01 #define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 #define CDC_DIRECT_LINE_MANAGEMENT 0x03 #define CDC_TELEPHONE_RINGER 0x04 #define CDC_REPORTING_CAPABILITIES 0x05 #define CDC_UNION 0x06 #define CDC_COUNTRY_SELECTION 0x07 #define CDC_TELEPHONE_OPERATIONAL_MODES 0x08 #define CDC_USB_TERMINAL 0x09 #define CDC_NETWORK_CHANNEL 0x0A #define CDC_PROTOCOL_UNIT 0x0B #define CDC_EXTENSION_UNIT 0x0C #define CDC_MULTI_CHANNEL_MANAGEMENT 0x0D #define CDC_CAPI_CONTROL_MANAGEMENT 0x0E #define CDC_ETHERNET_NETWORKING 0x0F #define CDC_ATM_NETWORKING 0x10 // CDC class-specific request codes // (usbcdc11.pdf, 6.2, Table 46) // see Table 45 for info about the specific requests. #define CDC_SEND_ENCAPSULATED_COMMAND 0x00 #define CDC_GET_ENCAPSULATED_RESPONSE 0x01 #define CDC_SET_COMM_FEATURE 0x02 #define CDC_GET_COMM_FEATURE 0x03 #define CDC_CLEAR_COMM_FEATURE 0x04 #define CDC_SET_AUX_LINE_STATE 0x10 #define CDC_SET_HOOK_STATE 0x11 #define CDC_PULSE_SETUP 0x12 #define CDC_SEND_PULSE 0x13 #define CDC_SET_PULSE_TIME 0x14 #define CDC_RING_AUX_JACK 0x15 #define CDC_SET_LINE_CODING 0x20 #define CDC_GET_LINE_CODING 0x21 #define CDC_SET_CONTROL_LINE_STATE 0x22 #define CDC_SEND_BREAK 0x23 #define CDC_SET_RINGER_PARMS 0x30 #define CDC_GET_RINGER_PARMS 0x31 #define CDC_SET_OPERATION_PARMS 0x32 #define CDC_GET_OPERATION_PARMS 0x33 #define CDC_SET_LINE_PARMS 0x34 #define CDC_GET_LINE_PARMS 0x35 #define CDC_DIAL_DIGITS 0x36 #define CDC_SET_UNIT_PARAMETER 0x37 #define CDC_GET_UNIT_PARAMETER 0x38 #define CDC_CLEAR_UNIT_PARAMETER 0x39 #define CDC_GET_PROFILE 0x3A #define CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 #define CDC_SET_ETHERNET_PMP_FILTER 0x41 #define CDC_GET_ETHERNET_PMP_FILTER 0x42 #define CDC_SET_ETHERNET_PACKET_FILTER 0x43 #define CDC_GET_ETHERNET_STATISTIC 0x44 #define CDC_SET_ATM_DATA_FORMAT 0x50 #define CDC_GET_ATM_DEVICE_STATISTICS 0x51 #define CDC_SET_ATM_DEFAULT_VC 0x52 #define CDC_GET_ATM_VC_STATISTICS 0x53 // Communication feature selector codes // (usbcdc11.pdf, 6.2.2..6.2.4, Table 47) #define CDC_ABSTRACT_STATE 0x01 #define CDC_COUNTRY_SETTING 0x02 // Feature Status returned for ABSTRACT_STATE Selector // (usbcdc11.pdf, 6.2.3, Table 48) #define CDC_IDLE_SETTING (1 << 0) #define CDC_DATA_MULTPLEXED_STATE (1 << 1) // Control signal bitmap values for the SetControlLineState request // (usbcdc11.pdf, 6.2.14, Table 51) #define CDC_DTE_PRESENT (1 << 0) #define CDC_ACTIVATE_CARRIER (1 << 1) // CDC class-specific notification codes // (usbcdc11.pdf, 6.3, Table 68) // see Table 67 for Info about class-specific notifications #define CDC_NOTIFICATION_NETWORK_CONNECTION 0x00 #define CDC_RESPONSE_AVAILABLE 0x01 #define CDC_AUX_JACK_HOOK_STATE 0x08 #define CDC_RING_DETECT 0x09 #define CDC_NOTIFICATION_SERIAL_STATE 0x20 #define CDC_CALL_STATE_CHANGE 0x28 #define CDC_LINE_STATE_CHANGE 0x29 #define CDC_CONNECTION_SPEED_CHANGE 0x2A // UART state bitmap values (Serial state notification). // (usbcdc11.pdf, 6.3.5, Table 69) #define CDC_SERIAL_STATE_OVERRUN (1 << 6) // receive data overrun error has occurred #define CDC_SERIAL_STATE_PARITY (1 << 5) // parity error has occurred #define CDC_SERIAL_STATE_FRAMING (1 << 4) // framing error has occurred #define CDC_SERIAL_STATE_RING (1 << 3) // state of ring signal detection #define CDC_SERIAL_STATE_BREAK (1 << 2) // state of break detection #define CDC_SERIAL_STATE_TX_CARRIER (1 << 1) // state of transmission carrier #define CDC_SERIAL_STATE_RX_CARRIER (1 << 0) // state of receiver carrier // capabilities callmgmt #define CDC_CALLMGMT_CAP_CALLMGMT 0x01 #define CDC_CALLMGMT_CAP_DATAINTF 0x02 // capabilities acm #define CDC_ACM_CAP_COMM 0x01 #define CDC_ACM_CAP_LINE 0x02 #define CDC_ACM_CAP_BRK 0x04 #define CDC_ACM_CAP_NOTIFY 0x08 /*---------------------------------------------------------------------------- * Structures based on usbcdc11.pdf (www.usb.org) *---------------------------------------------------------------------------*/ // Header functional descriptor // (usbcdc11.pdf, 5.2.3.1) // This header must precede any list of class-specific descriptors. typedef struct __packed _CDC_HEADER_DESCRIPTOR{ uint8_t bFunctionLength; // size of this descriptor in bytes uint8_t bDescriptorType; // CS_INTERFACE descriptor type uint8_t bDescriptorSubtype; // Header functional descriptor subtype uint16_t bcdCDC; // USB CDC specification release version } CDC_HEADER_DESCRIPTOR; //Call management functional descriptor // (usbcdc11.pdf, 5.2.3.2) // Describes the processing of calls for the communication class interface. typedef struct __packed _CDC_CALL_MANAGEMENT_DESCRIPTOR{ uint8_t bFunctionLength; // size of this descriptor in bytes uint8_t bDescriptorType; // CS_INTERFACE descriptor type uint8_t bDescriptorSubtype; // call management functional descriptor subtype uint8_t bmCapabilities; // capabilities that this configuration supports uint8_t bDataInterface; // interface number of the data class interface used for call management (optional) } CDC_CALL_MANAGEMENT_DESCRIPTOR; // Abstract control management functional descriptor // (usbcdc11.pdf, 5.2.3.3) // Describes the command supported by the communication interface class with the Abstract Control Model subclass code. typedef struct __packed _CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR{ uint8_t bFunctionLength; // size of this descriptor in bytes uint8_t bDescriptorType; // CS_INTERFACE descriptor type uint8_t bDescriptorSubtype; // abstract control management functional descriptor subtype uint8_t bmCapabilities; // capabilities supported by this configuration } CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR; // Union functional descriptors // (usbcdc11.pdf, 5.2.3.8) // Describes the relationship between a group of interfaces that can be considered to form a functional unit. typedef struct __packed _CDC_UNION_DESCRIPTOR{ uint8_t bFunctionLength; // size of this descriptor in bytes uint8_t bDescriptorType; // CS_INTERFACE descriptor type uint8_t bDescriptorSubtype; // union functional descriptor subtype uint8_t bMasterInterface; // interface number designated as master } CDC_UNION_DESCRIPTOR; // Union functional descriptors with one slave interface // (usbcdc11.pdf, 5.2.3.8) typedef struct __packed _CDC_UNION_1SLAVE_DESCRIPTOR{ CDC_UNION_DESCRIPTOR sUnion; // Union functional descriptor uint8_t bSlaveInterfaces[1]; // Slave interface 0 } CDC_UNION_1SLAVE_DESCRIPTOR; // Line coding structure // Format of the data returned when a GetLineCoding request is received // (usbcdc11.pdf, 6.2.13) typedef struct __packed _CDC_LINE_CODING{ uint32_t dwDTERate; // Data terminal rate in bits per second uint8_t bCharFormat; // Number of stop bits uint8_t bParityType; // Parity bit type uint8_t bDataBits; // Number of data bits } CDC_LINE_CODING; // Notification header // Data sent on the notification endpoint must follow this header. // see USB_SETUP_PACKET in file usb.h typedef USB_SETUP_PACKET CDC_NOTIFICATION_HEADER; #endif /* __CDC_H */