/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #define ALLOW_STM32DUINO #include "env_validate.h" #if HOTENDS > 2 || E_STEPPERS > 2 #error "LERDGE K supports up to 2 hotends / E-steppers." #endif #define BOARD_INFO_NAME "Lerdge K" #define DEFAULT_MACHINE_NAME "LERDGE" // EEPROM #if NO_EEPROM_SELECTED #define I2C_EEPROM #define SOFT_I2C_EEPROM // Force the use of Software I2C #define I2C_SCL_PIN PG14 #define I2C_SDA_PIN PG13 #define MARLIN_EEPROM_SIZE 0x10000 #endif // USB Flash Drive support #define HAS_OTG_USB_HOST_SUPPORT // // Servos // #define SERVO0_PIN PB11 // // Limit Switches // #define X_STOP_PIN PG3 #define Y_STOP_PIN PG4 #define Z_STOP_PIN PG5 // // Z Probe (when not Z_MIN_PIN) // //#ifndef Z_MIN_PROBE_PIN // #define Z_MIN_PROBE_PIN PG6 //#endif // // Filament runout // #define FIL_RUNOUT_PIN PE5 #define FIL_RUNOUT2_PIN PE6 // // Steppers // #define X_STEP_PIN PG1 #define X_DIR_PIN PB10 #define X_ENABLE_PIN PG0 //#ifndef X_CS_PIN // #define X_CS_PIN PE0 //#endif #define Y_STEP_PIN PF14 #define Y_DIR_PIN PF15 #define Y_ENABLE_PIN PF13 //#ifndef Y_CS_PIN // #define Y_CS_PIN PE1 //#endif #define Z_STEP_PIN PF11 #define Z_DIR_PIN PF12 #define Z_ENABLE_PIN PC5 //#ifndef Z_CS_PIN // #define Z_CS_PIN PE2 //#endif #define E0_STEP_PIN PC14 #define E0_DIR_PIN PC13 #define E0_ENABLE_PIN PC15 //#ifndef E0_CS_PIN // #define E0_CS_PIN PE3 //#endif #define E1_STEP_PIN PF1 #define E1_DIR_PIN PF0 #define E1_ENABLE_PIN PF2 //#ifndef E1_CS_PIN // #define E1_CS_PIN PE4 //#endif //#define E2_STEP_PIN PF4 // best guess //#define E2_DIR_PIN PF3 // best guess //#define E2_ENABLE_PIN PF5 // best guess //#ifndef E2_CS_PIN // #define E2_CS_PIN PB2 // best guess //#endif #if HAS_TMC_UART /** * TMC2208/TMC2209 stepper drivers */ #ifndef X_SERIAL_TX_PIN #define X_SERIAL_TX_PIN PB2 #endif #ifndef X_SERIAL_RX_PIN #define X_SERIAL_RX_PIN PB2 #endif #ifndef Y_SERIAL_TX_PIN #define Y_SERIAL_TX_PIN PE2 #endif #ifndef Y_SERIAL_RX_PIN #define Y_SERIAL_RX_PIN PE2 #endif #ifndef Z_SERIAL_TX_PIN #define Z_SERIAL_TX_PIN PE3 #endif #ifndef Z_SERIAL_RX_PIN #define Z_SERIAL_RX_PIN PE3 #endif #ifndef E0_SERIAL_TX_PIN #define E0_SERIAL_TX_PIN PE4 #endif #ifndef E0_SERIAL_RX_PIN #define E0_SERIAL_RX_PIN PE4 #endif #ifndef E1_SERIAL_TX_PIN #define E1_SERIAL_TX_PIN PE1 #endif #ifndef E1_SERIAL_RX_PIN #define E1_SERIAL_RX_PIN PE1 #endif #ifndef EX_SERIAL_TX_PIN #define E2_SERIAL_TX_PIN PE0 #endif #ifndef EX_SERIAL_RX_PIN #define E2_SERIAL_RX_PIN PE0 #endif // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 #endif // // Temperature Sensors // #define TEMP_0_PIN PC1 // Analog Input #define TEMP_1_PIN PC2 // Analog Input #define TEMP_BED_PIN PC0 // Analog Input // Lergde-K can choose thermocouple/thermistor mode in software. // For use with thermistors, these pins must be OUT/LOW. // This is done automatically. #define TEMP_0_TR_ENABLE_PIN PF10 #define TEMP_1_TR_ENABLE_PIN PF9 // // Heaters / Fans // #define HEATER_0_PIN PA1 #define HEATER_1_PIN PA0 #define HEATER_BED_PIN PA2 #ifndef FAN_PIN #define FAN_PIN PF7 #endif #define FAN1_PIN PF6 #ifndef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN PB1 #endif #ifndef E1_AUTO_FAN_PIN #define E1_AUTO_FAN_PIN PB0 #endif #define CONTROLLER_FAN_PIN PF8 // // LED / Lighting // //#define CASE_LIGHT_PIN_CI -1 //#define CASE_LIGHT_PIN_DO -1 //#define NEOPIXEL_PIN -1 #ifndef RGB_LED_R_PIN #define RGB_LED_R_PIN PB8 // swap R and G pin for compatibility with real wires #endif #ifndef RGB_LED_G_PIN #define RGB_LED_G_PIN PB7 #endif #ifndef RGB_LED_B_PIN #define RGB_LED_B_PIN PB9 #endif // // SD support // #define SDIO_SUPPORT #define SDIO_CLOCK 4800000 // // Misc. Functions // #define SDSS PC11 #define LED_PIN PA15 // Alive #define PS_ON_PIN PA4 #define KILL_PIN -1 #define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT #define SD_SCK_PIN PC12 #define SD_MISO_PIN PC8 #define SD_MOSI_PIN PD2 #define SD_SS_PIN PC11 #define SD_DETECT_PIN PA8 #define BEEPER_PIN PC7 // // TFT with FSMC interface // #if HAS_FSMC_TFT //#define TFT_DRIVER LERDGE_ST7796 #define TFT_RESET_PIN PD6 #define TFT_BACKLIGHT_PIN PD3 #define TFT_CS_PIN PD7 #define TFT_RS_PIN PD11 #define TOUCH_CS_PIN PG15 #define TOUCH_SCK_PIN PB3 #define TOUCH_MOSI_PIN PB5 #define TOUCH_MISO_PIN PB4 #endif #if IS_NEWPANEL #define BTN_EN1 PG10 #define BTN_EN2 PG11 #define BTN_ENC PG9 #endif