/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * English * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_EN_H #define LANGUAGE_EN_H #ifndef WELCOME_MSG #define WELCOME_MSG MACHINE_NAME _UxGT(" ready.") #endif #ifndef MSG_BACK #define MSG_BACK _UxGT("Back") #endif #ifndef MSG_SD_INSERTED #define MSG_SD_INSERTED _UxGT("Card inserted") #endif #ifndef MSG_SD_REMOVED #define MSG_SD_REMOVED _UxGT("Card removed") #endif #ifndef MSG_LCD_ENDSTOPS #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #endif #ifndef MSG_MAIN #define MSG_MAIN _UxGT("Main") #endif #ifndef MSG_AUTOSTART #define MSG_AUTOSTART _UxGT("Autostart") #endif #ifndef MSG_DISABLE_STEPPERS #define MSG_DISABLE_STEPPERS _UxGT("Disable steppers") #endif #ifndef MSG_DEBUG_MENU #define MSG_DEBUG_MENU _UxGT("Debug Menu") #endif #ifndef MSG_PROGRESS_BAR_TEST #define MSG_PROGRESS_BAR_TEST _UxGT("Progress Bar Test") #endif #ifndef MSG_AUTO_HOME #define MSG_AUTO_HOME _UxGT("Auto home") #endif #ifndef MSG_AUTO_HOME_X #define MSG_AUTO_HOME_X _UxGT("Home X") #endif #ifndef MSG_AUTO_HOME_Y #define MSG_AUTO_HOME_Y _UxGT("Home Y") #endif #ifndef MSG_AUTO_HOME_Z #define MSG_AUTO_HOME_Z _UxGT("Home Z") #endif #ifndef MSG_LEVEL_BED_HOMING #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #endif #ifndef MSG_LEVEL_BED_WAITING #define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") #endif #ifndef MSG_LEVEL_BED_NEXT_POINT #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point") #endif #ifndef MSG_LEVEL_BED_DONE #define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") #endif #ifndef MSG_Z_FADE_HEIGHT #define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") #endif #ifndef MSG_SET_HOME_OFFSETS #define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") #endif #ifndef MSG_HOME_OFFSETS_APPLIED #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") #endif #ifndef MSG_SET_ORIGIN #define MSG_SET_ORIGIN _UxGT("Set origin") #endif #ifndef MSG_PREHEAT_1 #define MSG_PREHEAT_1 _UxGT("Preheat PLA") #endif #ifndef MSG_PREHEAT_1_N #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #endif #ifndef MSG_PREHEAT_1_ALL #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All") #endif #ifndef MSG_PREHEAT_1_END #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End") #endif #ifndef MSG_PREHEAT_1_BEDONLY #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed") #endif #ifndef MSG_PREHEAT_1_SETTINGS #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") #endif #ifndef MSG_PREHEAT_2 #define MSG_PREHEAT_2 _UxGT("Preheat ABS") #endif #ifndef MSG_PREHEAT_2_N #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #endif #ifndef MSG_PREHEAT_2_ALL #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All") #endif #ifndef MSG_PREHEAT_2_END #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End") #endif #ifndef MSG_PREHEAT_2_BEDONLY #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") #endif #ifndef MSG_PREHEAT_2_SETTINGS #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf") #endif #ifndef MSG_COOLDOWN #define MSG_COOLDOWN _UxGT("Cooldown") #endif #ifndef MSG_SWITCH_PS_ON #define MSG_SWITCH_PS_ON _UxGT("Switch power on") #endif #ifndef MSG_SWITCH_PS_OFF #define MSG_SWITCH_PS_OFF _UxGT("Switch power off") #endif #ifndef MSG_EXTRUDE #define MSG_EXTRUDE _UxGT("Extrude") #endif #ifndef MSG_RETRACT #define MSG_RETRACT _UxGT("Retract") #endif #ifndef MSG_MOVE_AXIS #define MSG_MOVE_AXIS _UxGT("Move axis") #endif #ifndef MSG_BED_LEVELING #define MSG_BED_LEVELING _UxGT("Bed Leveling") #endif #ifndef MSG_LEVEL_BED #define MSG_LEVEL_BED _UxGT("Level bed") #endif #ifndef MSG_EDITING_STOPPED #define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped") #endif #ifndef MSG_USER_MENU #define MSG_USER_MENU _UxGT("Custom Commands") #endif #ifndef MSG_UBL_DOING_G29 #define MSG_UBL_DOING_G29 _UxGT("Doing G29") #endif #ifndef MSG_UBL_UNHOMED #define MSG_UBL_UNHOMED _UxGT("Home XYZ first") #endif #ifndef MSG_UBL_TOOLS #define MSG_UBL_TOOLS _UxGT("UBL Tools") #endif #ifndef MSG_UBL_LEVEL_BED #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #endif #ifndef MSG_UBL_MANUAL_MESH #define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh") #endif #ifndef MSG_UBL_BC_INSERT #define MSG_UBL_BC_INSERT _UxGT("Place shim & measure") #endif #ifndef MSG_UBL_BC_INSERT2 #define MSG_UBL_BC_INSERT2 _UxGT("Measure") #endif #ifndef MSG_UBL_BC_REMOVE #define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed") #endif #ifndef MSG_UBL_MOVING_TO_NEXT #define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") #endif #ifndef MSG_UBL_ACTIVATE_MESH #define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL") #endif #ifndef MSG_UBL_DEACTIVATE_MESH #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL") #endif #ifndef MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp") #endif #ifndef MSG_UBL_CUSTOM_BED_TEMP #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #endif #ifndef MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp") #endif #ifndef MSG_UBL_CUSTOM_HOTEND_TEMP #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #endif #ifndef MSG_UBL_MESH_EDIT #define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit") #endif #ifndef MSG_UBL_EDIT_CUSTOM_MESH #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") #endif #ifndef MSG_UBL_FINE_TUNE_MESH #define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") #endif #ifndef MSG_UBL_DONE_EDITING_MESH #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") #endif #ifndef MSG_UBL_BUILD_CUSTOM_MESH #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") #endif #ifndef MSG_UBL_BUILD_MESH_MENU #define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh") #endif #ifndef MSG_UBL_BUILD_PLA_MESH #define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh") #endif #ifndef MSG_UBL_BUILD_ABS_MESH #define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh") #endif #ifndef MSG_UBL_BUILD_COLD_MESH #define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh") #endif #ifndef MSG_UBL_MESH_HEIGHT_ADJUST #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height") #endif #ifndef MSG_UBL_MESH_HEIGHT_AMOUNT #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") #endif #ifndef MSG_UBL_VALIDATE_MESH_MENU #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh") #endif #ifndef MSG_UBL_VALIDATE_PLA_MESH #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh") #endif #ifndef MSG_UBL_VALIDATE_ABS_MESH #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh") #endif #ifndef MSG_UBL_VALIDATE_CUSTOM_MESH #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") #endif #ifndef MSG_UBL_CONTINUE_MESH #define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh") #endif #ifndef MSG_UBL_MESH_LEVELING #define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling") #endif #ifndef MSG_UBL_3POINT_MESH_LEVELING #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling") #endif #ifndef MSG_UBL_GRID_MESH_LEVELING #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling") #endif #ifndef MSG_UBL_MESH_LEVEL #define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh") #endif #ifndef MSG_UBL_SIDE_POINTS #define MSG_UBL_SIDE_POINTS _UxGT("Side Points") #endif #ifndef MSG_UBL_MAP_TYPE #define MSG_UBL_MAP_TYPE _UxGT("Map Type") #endif #ifndef MSG_UBL_OUTPUT_MAP #define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map") #endif #ifndef MSG_UBL_OUTPUT_MAP_HOST #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host") #endif #ifndef MSG_UBL_OUTPUT_MAP_CSV #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV") #endif #ifndef MSG_UBL_OUTPUT_MAP_BACKUP #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") #endif #ifndef MSG_UBL_INFO_UBL #define MSG_UBL_INFO_UBL _UxGT("Output UBL Info") #endif #ifndef MSG_UBL_EDIT_MESH_MENU #define MSG_UBL_EDIT_MESH_MENU _UxGT("Edit Mesh") #endif #ifndef MSG_UBL_FILLIN_AMOUNT #define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount") #endif #ifndef MSG_UBL_MANUAL_FILLIN #define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in") #endif #ifndef MSG_UBL_SMART_FILLIN #define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in") #endif #ifndef MSG_UBL_FILLIN_MESH #define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh") #endif #ifndef MSG_UBL_INVALIDATE_ALL #define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All") #endif #ifndef MSG_UBL_INVALIDATE_CLOSEST #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest") #endif #ifndef MSG_UBL_FINE_TUNE_ALL #define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All") #endif #ifndef MSG_UBL_FINE_TUNE_CLOSEST #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest") #endif #ifndef MSG_UBL_STORAGE_MESH_MENU #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage") #endif #ifndef MSG_UBL_STORAGE_SLOT #define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") #endif #ifndef MSG_UBL_LOAD_MESH #define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh") #endif #ifndef MSG_UBL_SAVE_MESH #define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh") #endif #ifndef MSG_MESH_LOADED #define MSG_MESH_LOADED _UxGT("Mesh %i loaded") #endif #ifndef MSG_MESH_SAVED #define MSG_MESH_SAVED _UxGT("Mesh %i saved") #endif #ifndef MSG_NO_STORAGE #define MSG_NO_STORAGE _UxGT("No storage") #endif #ifndef MSG_UBL_SAVE_ERROR #define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save") #endif #ifndef MSG_UBL_RESTORE_ERROR #define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore") #endif #ifndef MSG_UBL_Z_OFFSET_STOPPED #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped") #endif #ifndef MSG_UBL_STEP_BY_STEP_MENU #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL") #endif #ifndef MSG_MOVING #define MSG_MOVING _UxGT("Moving...") #endif #ifndef MSG_FREE_XY #define MSG_FREE_XY _UxGT("Free XY") #endif #ifndef MSG_MOVE_X #define MSG_MOVE_X _UxGT("Move X") #endif #ifndef MSG_MOVE_Y #define MSG_MOVE_Y _UxGT("Move Y") #endif #ifndef MSG_MOVE_Z #define MSG_MOVE_Z _UxGT("Move Z") #endif #ifndef MSG_MOVE_E #define MSG_MOVE_E _UxGT("Extruder") #endif #ifndef MSG_MOVE_01MM #define MSG_MOVE_01MM _UxGT("Move 0.1mm") #endif #ifndef MSG_MOVE_1MM #define MSG_MOVE_1MM _UxGT("Move 1mm") #endif #ifndef MSG_MOVE_10MM #define MSG_MOVE_10MM _UxGT("Move 10mm") #endif #ifndef MSG_SPEED #define MSG_SPEED _UxGT("Speed") #endif #ifndef MSG_BED_Z #define MSG_BED_Z _UxGT("Bed Z") #endif #ifndef MSG_NOZZLE #define MSG_NOZZLE _UxGT("Nozzle") #endif #ifndef MSG_BED #define MSG_BED _UxGT("Bed") #endif #ifndef MSG_FAN_SPEED #define MSG_FAN_SPEED _UxGT("Fan speed") #endif #ifndef MSG_FLOW #define MSG_FLOW _UxGT("Flow") #endif #ifndef MSG_CONTROL #define MSG_CONTROL _UxGT("Control") #endif #ifndef MSG_MIN #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") #endif #ifndef MSG_MAX #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") #endif #ifndef MSG_FACTOR #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") #endif #ifndef MSG_AUTOTEMP #define MSG_AUTOTEMP _UxGT("Autotemp") #endif #ifndef MSG_ON #define MSG_ON _UxGT("On ") #endif #ifndef MSG_OFF #define MSG_OFF _UxGT("Off") #endif #ifndef MSG_PID_P #define MSG_PID_P _UxGT("PID-P") #endif #ifndef MSG_PID_I #define MSG_PID_I _UxGT("PID-I") #endif #ifndef MSG_PID_D #define MSG_PID_D _UxGT("PID-D") #endif #ifndef MSG_PID_C #define MSG_PID_C _UxGT("PID-C") #endif #ifndef MSG_SELECT #define MSG_SELECT _UxGT("Select") #endif #ifndef MSG_ACC #define MSG_ACC _UxGT("Accel") #endif #ifndef MSG_JERK #define MSG_JERK _UxGT("Jerk") #endif #ifndef MSG_VX_JERK #define MSG_VX_JERK _UxGT("Vx-jerk") #endif #ifndef MSG_VY_JERK #define MSG_VY_JERK _UxGT("Vy-jerk") #endif #ifndef MSG_VZ_JERK #define MSG_VZ_JERK _UxGT("Vz-jerk") #endif #ifndef MSG_VE_JERK #define MSG_VE_JERK _UxGT("Ve-jerk") #endif #ifndef MSG_VELOCITY #define MSG_VELOCITY _UxGT("Velocity") #endif #ifndef MSG_VMAX #define MSG_VMAX _UxGT("Vmax ") #endif #ifndef MSG_VMIN #define MSG_VMIN _UxGT("Vmin") #endif #ifndef MSG_VTRAV_MIN #define MSG_VTRAV_MIN _UxGT("VTrav min") #endif #ifndef MSG_ACCELERATION #define MSG_ACCELERATION _UxGT("Acceleration") #endif #ifndef MSG_AMAX #define MSG_AMAX _UxGT("Amax ") #endif #ifndef MSG_A_RETRACT #define MSG_A_RETRACT _UxGT("A-retract") #endif #ifndef MSG_A_TRAVEL #define MSG_A_TRAVEL _UxGT("A-travel") #endif #ifndef MSG_STEPS_PER_MM #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #endif #ifndef MSG_XSTEPS #define MSG_XSTEPS _UxGT("Xsteps/mm") #endif #ifndef MSG_YSTEPS #define MSG_YSTEPS _UxGT("Ysteps/mm") #endif #ifndef MSG_ZSTEPS #define MSG_ZSTEPS _UxGT("Zsteps/mm") #endif #ifndef MSG_ESTEPS #define MSG_ESTEPS _UxGT("Esteps/mm") #endif #ifndef MSG_E1STEPS #define MSG_E1STEPS _UxGT("E1steps/mm") #endif #ifndef MSG_E2STEPS #define MSG_E2STEPS _UxGT("E2steps/mm") #endif #ifndef MSG_E3STEPS #define MSG_E3STEPS _UxGT("E3steps/mm") #endif #ifndef MSG_E4STEPS #define MSG_E4STEPS _UxGT("E4steps/mm") #endif #ifndef MSG_E5STEPS #define MSG_E5STEPS _UxGT("E5steps/mm") #endif #ifndef MSG_TEMPERATURE #define MSG_TEMPERATURE _UxGT("Temperature") #endif #ifndef MSG_MOTION #define MSG_MOTION _UxGT("Motion") #endif #ifndef MSG_FILAMENT #define MSG_FILAMENT _UxGT("Filament") #endif #ifndef MSG_VOLUMETRIC_ENABLED #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #endif #ifndef MSG_FILAMENT_DIAM #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #endif #ifndef MSG_ADVANCE_K #define MSG_ADVANCE_K _UxGT("Advance K") #endif #ifndef MSG_CONTRAST #define MSG_CONTRAST _UxGT("LCD contrast") #endif #ifndef MSG_STORE_EEPROM #define MSG_STORE_EEPROM _UxGT("Store settings") #endif #ifndef MSG_LOAD_EEPROM #define MSG_LOAD_EEPROM _UxGT("Load settings") #endif #ifndef MSG_RESTORE_FAILSAFE #define MSG_RESTORE_FAILSAFE _UxGT("Restore failsafe") #endif #ifndef MSG_INIT_EEPROM #define MSG_INIT_EEPROM _UxGT("Initialize EEPROM") #endif #ifndef MSG_REFRESH #define MSG_REFRESH _UxGT("Refresh") #endif #ifndef MSG_WATCH #define MSG_WATCH _UxGT("Info screen") #endif #ifndef MSG_PREPARE #define MSG_PREPARE _UxGT("Prepare") #endif #ifndef MSG_TUNE #define MSG_TUNE _UxGT("Tune") #endif #ifndef MSG_PAUSE_PRINT #define MSG_PAUSE_PRINT _UxGT("Pause print") #endif #ifndef MSG_RESUME_PRINT #define MSG_RESUME_PRINT _UxGT("Resume print") #endif #ifndef MSG_STOP_PRINT #define MSG_STOP_PRINT _UxGT("Stop print") #endif #ifndef MSG_CARD_MENU #define MSG_CARD_MENU _UxGT("Print from SD") #endif #ifndef MSG_NO_CARD #define MSG_NO_CARD _UxGT("No SD card") #endif #ifndef MSG_DWELL #define MSG_DWELL _UxGT("Sleep...") #endif #ifndef MSG_USERWAIT #define MSG_USERWAIT _UxGT("Click to resume...") #endif #ifndef MSG_PRINT_PAUSED #define MSG_PRINT_PAUSED _UxGT("Print paused") #endif #ifndef MSG_RESUMING #define MSG_RESUMING _UxGT("Resuming print") #endif #ifndef MSG_PRINT_ABORTED #define MSG_PRINT_ABORTED _UxGT("Print aborted") #endif #ifndef MSG_NO_MOVE #define MSG_NO_MOVE _UxGT("No move.") #endif #ifndef MSG_KILLED #define MSG_KILLED _UxGT("KILLED. ") #endif #ifndef MSG_STOPPED #define MSG_STOPPED _UxGT("STOPPED. ") #endif #ifndef MSG_CONTROL_RETRACT #define MSG_CONTROL_RETRACT _UxGT("Retract mm") #endif #ifndef MSG_CONTROL_RETRACT_SWAP #define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") #endif #ifndef MSG_CONTROL_RETRACTF #define MSG_CONTROL_RETRACTF _UxGT("Retract V") #endif #ifndef MSG_CONTROL_RETRACT_ZLIFT #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") #endif #ifndef MSG_CONTROL_RETRACT_RECOVER #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #endif #ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #endif #ifndef MSG_CONTROL_RETRACT_RECOVERF #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #endif #ifndef MSG_AUTORETRACT #define MSG_AUTORETRACT _UxGT("AutoRetr.") #endif #ifndef MSG_FILAMENTCHANGE #define MSG_FILAMENTCHANGE _UxGT("Change filament") #endif #ifndef MSG_INIT_SDCARD #define MSG_INIT_SDCARD _UxGT("Init. SD card") #endif #ifndef MSG_CNG_SDCARD #define MSG_CNG_SDCARD _UxGT("Change SD card") #endif #ifndef MSG_ZPROBE_OUT #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #endif #ifndef MSG_BLTOUCH #define MSG_BLTOUCH _UxGT("BLTouch") #endif #ifndef MSG_BLTOUCH_SELFTEST #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #endif #ifndef MSG_BLTOUCH_RESET #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #endif #ifndef MSG_BLTOUCH_DEPLOY #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") #endif #ifndef MSG_BLTOUCH_STOW #define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch") #endif #ifndef MSG_HOME #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #endif #ifndef MSG_FIRST #define MSG_FIRST _UxGT("first") #endif #ifndef MSG_ZPROBE_ZOFFSET #define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") #endif #ifndef MSG_BABYSTEP_X #define MSG_BABYSTEP_X _UxGT("Babystep X") #endif #ifndef MSG_BABYSTEP_Y #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #endif #ifndef MSG_BABYSTEP_Z #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #endif #ifndef MSG_ENDSTOP_ABORT #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #endif #ifndef MSG_HEATING_FAILED_LCD #define MSG_HEATING_FAILED_LCD _UxGT("Heating failed") #endif #ifndef MSG_ERR_REDUNDANT_TEMP #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") #endif #ifndef MSG_THERMAL_RUNAWAY #define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") #endif #ifndef MSG_ERR_MAXTEMP #define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") #endif #ifndef MSG_ERR_MINTEMP #define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") #endif #ifndef MSG_ERR_MAXTEMP_BED #define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") #endif #ifndef MSG_ERR_MINTEMP_BED #define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") #endif #ifndef MSG_ERR_Z_HOMING #define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") #endif #ifndef MSG_HALTED #define MSG_HALTED _UxGT("PRINTER HALTED") #endif #ifndef MSG_PLEASE_RESET #define MSG_PLEASE_RESET _UxGT("Please reset") #endif #ifndef MSG_SHORT_DAY #define MSG_SHORT_DAY _UxGT("d") // One character only #endif #ifndef MSG_SHORT_HOUR #define MSG_SHORT_HOUR _UxGT("h") // One character only #endif #ifndef MSG_SHORT_MINUTE #define MSG_SHORT_MINUTE _UxGT("m") // One character only #endif #ifndef MSG_HEATING #define MSG_HEATING _UxGT("Heating...") #endif #ifndef MSG_HEATING_COMPLETE #define MSG_HEATING_COMPLETE _UxGT("Heating done.") #endif #ifndef MSG_BED_HEATING #define MSG_BED_HEATING _UxGT("Bed Heating.") #endif #ifndef MSG_BED_DONE #define MSG_BED_DONE _UxGT("Bed done.") #endif #ifndef MSG_DELTA_CALIBRATE #define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration") #endif #ifndef MSG_DELTA_CALIBRATE_X #define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X") #endif #ifndef MSG_DELTA_CALIBRATE_Y #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y") #endif #ifndef MSG_DELTA_CALIBRATE_Z #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z") #endif #ifndef MSG_DELTA_CALIBRATE_CENTER #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") #endif #ifndef MSG_DELTA_SETTINGS #define MSG_DELTA_SETTINGS _UxGT("Delta Settings") #endif #ifndef MSG_DELTA_AUTO_CALIBRATE #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration") #endif #ifndef MSG_DELTA_HEIGHT_CALIBRATE #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") #endif #ifndef MSG_DELTA_DIAG_ROG #define MSG_DELTA_DIAG_ROG _UxGT("Diag Rod") #endif #ifndef MSG_DELTA_HEIGHT #define MSG_DELTA_HEIGHT _UxGT("Height") #endif #ifndef MSG_DELTA_RADIUS #define MSG_DELTA_RADIUS _UxGT("Radius") #endif #ifndef MSG_INFO_MENU #define MSG_INFO_MENU _UxGT("About Printer") #endif #ifndef MSG_INFO_PRINTER_MENU #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") #endif #ifndef MSG_3POINT_LEVELING #define MSG_3POINT_LEVELING _UxGT("3-Point Leveling") #endif #ifndef MSG_LINEAR_LEVELING #define MSG_LINEAR_LEVELING _UxGT("Linear Leveling") #endif #ifndef MSG_BILINEAR_LEVELING #define MSG_BILINEAR_LEVELING _UxGT("Bilinear Leveling") #endif #ifndef MSG_UBL_LEVELING #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") #endif #ifndef MSG_MESH_LEVELING #define MSG_MESH_LEVELING _UxGT("Mesh Leveling") #endif #ifndef MSG_INFO_STATS_MENU #define MSG_INFO_STATS_MENU _UxGT("Printer Stats") #endif #ifndef MSG_INFO_BOARD_MENU #define MSG_INFO_BOARD_MENU _UxGT("Board Info") #endif #ifndef MSG_INFO_THERMISTOR_MENU #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #endif #ifndef MSG_INFO_EXTRUDERS #define MSG_INFO_EXTRUDERS _UxGT("Extruders") #endif #ifndef MSG_INFO_BAUDRATE #define MSG_INFO_BAUDRATE _UxGT("Baud") #endif #ifndef MSG_INFO_PROTOCOL #define MSG_INFO_PROTOCOL _UxGT("Protocol") #endif #ifndef MSG_CASE_LIGHT #define MSG_CASE_LIGHT _UxGT("Case light") #endif #ifndef MSG_CASE_LIGHT_BRIGHTNESS #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light BRIGHTNESS") #endif #if LCD_WIDTH >= 20 #ifndef MSG_INFO_PRINT_COUNT #define MSG_INFO_PRINT_COUNT _UxGT("Print Count") #endif #ifndef MSG_INFO_COMPLETED_PRINTS #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") #endif #ifndef MSG_INFO_PRINT_TIME #define MSG_INFO_PRINT_TIME _UxGT("Total print time") #endif #ifndef MSG_INFO_PRINT_LONGEST #define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time") #endif #ifndef MSG_INFO_PRINT_FILAMENT #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total") #endif #else #ifndef MSG_INFO_PRINT_COUNT #define MSG_INFO_PRINT_COUNT _UxGT("Prints") #endif #ifndef MSG_INFO_COMPLETED_PRINTS #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") #endif #ifndef MSG_INFO_PRINT_TIME #define MSG_INFO_PRINT_TIME _UxGT("Total") #endif #ifndef MSG_INFO_PRINT_LONGEST #define MSG_INFO_PRINT_LONGEST _UxGT("Longest") #endif #ifndef MSG_INFO_PRINT_FILAMENT #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded") #endif #endif #ifndef MSG_INFO_MIN_TEMP #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #endif #ifndef MSG_INFO_MAX_TEMP #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #endif #ifndef MSG_INFO_PSU #define MSG_INFO_PSU _UxGT("Power Supply") #endif #ifndef MSG_DRIVE_STRENGTH #define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") #endif #ifndef MSG_DAC_PERCENT #define MSG_DAC_PERCENT _UxGT("Driver %") #endif #ifndef MSG_DAC_EEPROM_WRITE #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") #endif #ifndef MSG_FILAMENT_CHANGE_HEADER #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more") #endif #ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print") #endif #ifndef MSG_FILAMENT_CHANGE_MINTEMP #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ") #endif #ifndef MSG_FILAMENT_CHANGE_NOZZLE #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") #endif #ifndef MSG_ERR_HOMING_FAILED #define MSG_ERR_HOMING_FAILED _UxGT("Homing failed") #endif #ifndef MSG_ERR_PROBING_FAILED #define MSG_ERR_PROBING_FAILED _UxGT("Probing failed") #endif // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 #ifndef MSG_FILAMENT_CHANGE_INIT_1 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_1 #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") #endif #ifndef MSG_FILAMENT_CHANGE_HEAT_1 #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") #endif #ifndef MSG_FILAMENT_CHANGE_HEATING_1 #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_1 #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1 #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude") #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_1 #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") #endif #else // LCD_HEIGHT < 4 #ifndef MSG_FILAMENT_CHANGE_INIT_1 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...") #endif #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") #endif #ifndef MSG_FILAMENT_CHANGE_INSERT_1 #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") #endif #ifndef MSG_FILAMENT_CHANGE_HEATING_1 #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...") #endif #ifndef MSG_FILAMENT_CHANGE_LOAD_1 #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") #endif #ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1 #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...") #endif #ifndef MSG_FILAMENT_CHANGE_RESUME_1 #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") #endif #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_EN_H