/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Selena Compact pin assignments
 */

#ifndef TARGET_LPC1768
  #error "Oops!  Make sure you have the LPC1768 environment selected in your IDE."
#endif

#ifndef BOARD_NAME
  #define BOARD_NAME "Selena Compact"
  #define DEFAULT_WEBSITE_URL "https://github.com/Ales2-k/Selena"
#endif

//
// Limit Switches
//

#define X_MIN_PIN          P1_28
#define X_MAX_PIN          P1_25
#define Y_MIN_PIN          P2_11
#define Y_MAX_PIN          -1
#define Z_MIN_PIN          P1_27
#define Z_MAX_PIN          -1
#define Z_PROBE            P1_22

//
// Steppers
//
#define X_STEP_PIN         P2_00
#define X_DIR_PIN          P0_05
#define X_ENABLE_PIN       P0_04

#define Y_STEP_PIN         P2_01
#define Y_DIR_PIN          P0_11
#define Y_ENABLE_PIN       P0_10

#define Z_STEP_PIN         P2_02
#define Z_DIR_PIN          P0_20
#define Z_ENABLE_PIN       P0_19

#define E0_STEP_PIN        P2_03
#define E0_DIR_PIN         P0_22
#define E0_ENABLE_PIN      P0_21

#define E1_STEP_PIN        P2_08
#define E1_DIR_PIN         P2_13
#define E1_ENABLE_PIN      P4_29

//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN        0   // A0 (TH1)
#define TEMP_0_PIN          1   // A1 (TH2)
#define TEMP_1_PIN          2   // A2 (TH3)


//
// Heaters / Fans
//

#define HEATER_BED_PIN     P2_05
#define HEATER_BED2_PIN    P2_04
#define HEATER_0_PIN       P2_07
#define HEATER_1_PIN       P2_06
#ifndef FAN_PIN
  #define FAN_PIN          P1_24
#endif
#define FAN1_PIN           P1_26

//
// Display
//

#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
    #define LCD_PINS_RS         P0_16
    #define LCD_PINS_ENABLE     P0_18
    #define LCD_PINS_D4         P0_15
    #define LCD_PINS_D5         P1_00
    #define LCD_PINS_D6         P1_01
    #define LCD_PINS_D7         P1_04
    #define BEEPER_PIN          P1_31

    #define BTN_EN1             P3_25
    #define BTN_EN2             P3_26
    #define BTN_ENC             P1_30

    #define SD_DETECT_PIN       -1
#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

//
// Servo
//
#define SERVO0_PIN        P1_23