History

Scott Lahteine 1718eff54a Code changes supporting up to 6 extruders		2018-09-16 22:32:53 -05:00
..
EEPROM_Emul	Use American English	2018-08-22 17:16:18 -05:00
EmulatedEeprom.cpp	Use American English	2018-08-22 17:16:18 -05:00
endstop_interrupts.h	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
fastio_STM32F7.h	HAL FastIO cleanup and fixes	2018-04-26 00:40:16 -05:00
HAL.cpp	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
HAL.h	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
HAL_Servo_STM32F7.cpp	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
HAL_Servo_STM32F7.h	Add support for STM32F7 MCU	2018-01-15 01:13:03 -06:00
HAL_spi_STM32F7.cpp	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
HAL_timers_STM32F7.cpp	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
HAL_timers_STM32F7.h	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
persistent_store_eeprom.cpp	Remove 'const' from PersistentStore::capacity	2018-08-14 04:46:10 -05:00
pinsDebug.h	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
README.md	Clean up trailing whitespace	2018-01-21 17:19:38 -06:00
SanityCheck.h	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
spi_pins.h	Define short pin names in fastio for STM32 (#10461 )	2018-04-20 14:54:35 -05:00
TMC2660.cpp	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
TMC2660.h	Fix some spellings	2018-04-02 03:03:37 -05:00
watchdog_STM32F7.cpp	Cleanups for STM32F7	2018-01-15 02:46:37 -06:00
watchdog_STM32F7.h	Fix some header comments	2018-07-17 19:50:24 -05:00

README.md

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.