677 lines
30 KiB
C
677 lines
30 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* stepper_indirection.h - stepper motor driver indirection macros
|
|
* to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation
|
|
* Part of Marlin
|
|
*
|
|
* Copyright (c) 2015 Dominik Wenger
|
|
*
|
|
* Marlin is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* at your option) any later version.
|
|
*
|
|
* Marlin is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "../inc/MarlinConfig.h"
|
|
|
|
// TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI
|
|
#if HAS_DRIVER(TMC26X)
|
|
#include <SPI.h>
|
|
#ifdef STM32F7
|
|
#include "../HAL/HAL_STM32F7/TMC2660.h"
|
|
#else
|
|
#include <TMC26XStepper.h>
|
|
#endif
|
|
void tmc26x_init_to_defaults();
|
|
#endif
|
|
|
|
#if HAS_TRINAMIC
|
|
#include <TMCStepper.h>
|
|
#include "../feature/tmc_util.h"
|
|
#if TMCSTEPPER_VERSION < 0x000202
|
|
#error "Update TMCStepper library to 0.2.2 or newer."
|
|
#endif
|
|
|
|
#define ____TMC_CLASS(MODEL, A, I) TMCMarlin<TMC##MODEL##Stepper, A, I>
|
|
#define ___TMC_CLASS(MODEL, A, I) ____TMC_CLASS(MODEL, A, I)
|
|
#define __TMC_CLASS(MODEL, A, I) ___TMC_CLASS(_##MODEL, A, I)
|
|
#define _TMC_CLASS(MODEL, L) __TMC_CLASS(MODEL, L)
|
|
#define TMC_CLASS(ST) _TMC_CLASS(ST##_DRIVER_TYPE, TMC_##ST##_LABEL)
|
|
|
|
typedef struct {
|
|
uint8_t toff;
|
|
int8_t hend;
|
|
uint8_t hstrt;
|
|
} chopper_timing_t;
|
|
|
|
static constexpr chopper_timing_t chopper_timing = CHOPPER_TIMING;
|
|
|
|
#if HAS_DRIVER(TMC2208)
|
|
void tmc2208_serial_begin();
|
|
#endif
|
|
#endif
|
|
|
|
// L6470 has STEP on normal pins, but DIR/ENABLE via SPI
|
|
#if HAS_DRIVER(L6470)
|
|
#include "L6470/L6470_Marlin.h"
|
|
#define L6470_WRITE_DIR_COMMAND(STATE,Q) do{ L6470_dir_commands[Q] = (STATE ? dSPIN_STEP_CLOCK_REV : dSPIN_STEP_CLOCK_FWD); }while(0)
|
|
#endif
|
|
|
|
void restore_stepper_drivers(); // Called by PSU_ON
|
|
void reset_stepper_drivers(); // Called by settings.load / settings.reset
|
|
|
|
// X Stepper
|
|
#if AXIS_DRIVER_TYPE_X(L6470)
|
|
extern L6470 stepperX;
|
|
#define X_ENABLE_INIT NOOP
|
|
#define X_ENABLE_WRITE(STATE) NOOP
|
|
#define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ)
|
|
#define X_DIR_INIT NOOP
|
|
#define X_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,X)
|
|
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(X)
|
|
extern TMC_CLASS(X) stepperX;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_X(TMC26X)
|
|
extern TMC26XStepper stepperX;
|
|
#define X_ENABLE_INIT NOOP
|
|
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
|
|
#define X_ENABLE_READ stepperX.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X)
|
|
#define X_ENABLE_INIT NOOP
|
|
#define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define X_ENABLE_READ stepperX.isEnabled()
|
|
#else
|
|
#define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN)
|
|
#define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE)
|
|
#define X_ENABLE_READ READ(X_ENABLE_PIN)
|
|
#endif
|
|
#define X_DIR_INIT SET_OUTPUT(X_DIR_PIN)
|
|
#define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE)
|
|
#define X_DIR_READ READ(X_DIR_PIN)
|
|
#endif
|
|
#define X_STEP_INIT SET_OUTPUT(X_STEP_PIN)
|
|
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
|
|
#define X_STEP_READ READ(X_STEP_PIN)
|
|
|
|
// Y Stepper
|
|
#if AXIS_DRIVER_TYPE_Y(L6470)
|
|
extern L6470 stepperY;
|
|
#define Y_ENABLE_INIT NOOP
|
|
#define Y_ENABLE_WRITE(STATE) NOOP
|
|
#define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ)
|
|
#define Y_DIR_INIT NOOP
|
|
#define Y_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Y)
|
|
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(Y)
|
|
extern TMC_CLASS(Y) stepperY;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_Y(TMC26X)
|
|
extern TMC26XStepper stepperY;
|
|
#define Y_ENABLE_INIT NOOP
|
|
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
|
|
#define Y_ENABLE_READ stepperY.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y)
|
|
#define Y_ENABLE_INIT NOOP
|
|
#define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define Y_ENABLE_READ stepperY.isEnabled()
|
|
#else
|
|
#define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN)
|
|
#define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE)
|
|
#define Y_ENABLE_READ READ(Y_ENABLE_PIN)
|
|
#endif
|
|
#define Y_DIR_INIT SET_OUTPUT(Y_DIR_PIN)
|
|
#define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE)
|
|
#define Y_DIR_READ READ(Y_DIR_PIN)
|
|
#endif
|
|
#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN)
|
|
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
|
|
#define Y_STEP_READ READ(Y_STEP_PIN)
|
|
|
|
// Z Stepper
|
|
#if AXIS_DRIVER_TYPE_Z(L6470)
|
|
extern L6470 stepperZ;
|
|
#define Z_ENABLE_INIT NOOP
|
|
#define Z_ENABLE_WRITE(STATE) NOOP
|
|
#define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ)
|
|
#define Z_DIR_INIT NOOP
|
|
#define Z_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z)
|
|
#define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(Z)
|
|
extern TMC_CLASS(Z) stepperZ;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_Z(TMC26X)
|
|
extern TMC26XStepper stepperZ;
|
|
#define Z_ENABLE_INIT NOOP
|
|
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
|
|
#define Z_ENABLE_READ stepperZ.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z)
|
|
#define Z_ENABLE_INIT NOOP
|
|
#define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define Z_ENABLE_READ stepperZ.isEnabled()
|
|
#else
|
|
#define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN)
|
|
#define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE)
|
|
#define Z_ENABLE_READ READ(Z_ENABLE_PIN)
|
|
#endif
|
|
#define Z_DIR_INIT SET_OUTPUT(Z_DIR_PIN)
|
|
#define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE)
|
|
#define Z_DIR_READ READ(Z_DIR_PIN)
|
|
#endif
|
|
#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN)
|
|
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
|
|
#define Z_STEP_READ READ(Z_STEP_PIN)
|
|
|
|
// X2 Stepper
|
|
#if HAS_X2_ENABLE
|
|
#if AXIS_DRIVER_TYPE_X2(L6470)
|
|
extern L6470 stepperX2;
|
|
#define X2_ENABLE_INIT NOOP
|
|
#define X2_ENABLE_WRITE(STATE) NOOP
|
|
#define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ)
|
|
#define X2_DIR_INIT NOOP
|
|
#define X2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,X2)
|
|
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(X2)
|
|
extern TMC_CLASS(X2) stepperX2;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_X2(TMC26X)
|
|
extern TMC26XStepper stepperX2;
|
|
#define X2_ENABLE_INIT NOOP
|
|
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
|
|
#define X2_ENABLE_READ stepperX2.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X2)
|
|
#define X2_ENABLE_INIT NOOP
|
|
#define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define X2_ENABLE_READ stepperX2.isEnabled()
|
|
#else
|
|
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
|
|
#define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
|
|
#define X2_ENABLE_READ READ(X2_ENABLE_PIN)
|
|
#endif
|
|
#define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN)
|
|
#define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE)
|
|
#define X2_DIR_READ READ(X2_DIR_PIN)
|
|
#endif
|
|
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
|
|
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
|
|
#define X2_STEP_READ READ(X2_STEP_PIN)
|
|
#endif
|
|
|
|
// Y2 Stepper
|
|
#if HAS_Y2_ENABLE
|
|
#if AXIS_DRIVER_TYPE_Y2(L6470)
|
|
extern L6470 stepperY2;
|
|
#define Y2_ENABLE_INIT NOOP
|
|
#define Y2_ENABLE_WRITE(STATE) NOOP
|
|
#define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ)
|
|
#define Y2_DIR_INIT NOOP
|
|
#define Y2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Y2)
|
|
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(Y2)
|
|
extern TMC_CLASS(Y2) stepperY2;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_Y2(TMC26X)
|
|
extern TMC26XStepper stepperY2;
|
|
#define Y2_ENABLE_INIT NOOP
|
|
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
|
|
#define Y2_ENABLE_READ stepperY2.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2)
|
|
#define Y2_ENABLE_INIT NOOP
|
|
#define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define Y2_ENABLE_READ stepperY2.isEnabled()
|
|
#else
|
|
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
|
|
#define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
|
|
#define Y2_ENABLE_READ READ(Y2_ENABLE_PIN)
|
|
#endif
|
|
#define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN)
|
|
#define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE)
|
|
#define Y2_DIR_READ READ(Y2_DIR_PIN)
|
|
#endif
|
|
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
|
|
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
|
|
#define Y2_STEP_READ READ(Y2_STEP_PIN)
|
|
#else
|
|
#define Y2_DIR_WRITE(STATE) NOOP
|
|
#endif
|
|
|
|
// Z2 Stepper
|
|
#if HAS_Z2_ENABLE
|
|
#if AXIS_DRIVER_TYPE_Z2(L6470)
|
|
extern L6470 stepperZ2;
|
|
#define Z2_ENABLE_INIT NOOP
|
|
#define Z2_ENABLE_WRITE(STATE) NOOP
|
|
#define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ)
|
|
#define Z2_DIR_INIT NOOP
|
|
#define Z2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z2)
|
|
#define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(Z2)
|
|
extern TMC_CLASS(Z2) stepperZ2;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_Z2(TMC26X)
|
|
extern TMC26XStepper stepperZ2;
|
|
#define Z2_ENABLE_INIT NOOP
|
|
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
|
|
#define Z2_ENABLE_READ stepperZ2.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2)
|
|
#define Z2_ENABLE_INIT NOOP
|
|
#define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define Z2_ENABLE_READ stepperZ2.isEnabled()
|
|
#else
|
|
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
|
|
#define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
|
|
#define Z2_ENABLE_READ READ(Z2_ENABLE_PIN)
|
|
#endif
|
|
#define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN)
|
|
#define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE)
|
|
#define Z2_DIR_READ READ(Z2_DIR_PIN)
|
|
#endif
|
|
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
|
|
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
|
|
#define Z2_STEP_READ READ(Z2_STEP_PIN)
|
|
#else
|
|
#define Z2_DIR_WRITE(STATE) NOOP
|
|
#endif
|
|
|
|
// Z3 Stepper
|
|
#if HAS_Z3_ENABLE
|
|
#if AXIS_DRIVER_TYPE_Z3(L6470)
|
|
extern L6470 stepperZ3;
|
|
#define Z3_ENABLE_INIT NOOP
|
|
#define Z3_ENABLE_WRITE(STATE) NOOP
|
|
#define Z3_ENABLE_READ (stepperZ3.getStatus() & STATUS_HIZ)
|
|
#define Z3_DIR_INIT NOOP
|
|
#define Z3_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z3)
|
|
#define Z3_DIR_READ (stepperZ3.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(Z3)
|
|
extern TMC_CLASS(Z3) stepperZ3;
|
|
#endif
|
|
#if ENABLED(Z3_IS_TMC26X)
|
|
extern TMC26XStepper stepperZ3;
|
|
#define Z3_ENABLE_INIT NOOP
|
|
#define Z3_ENABLE_WRITE(STATE) stepperZ3.setEnabled(STATE)
|
|
#define Z3_ENABLE_READ stepperZ3.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3)
|
|
#define Z3_ENABLE_INIT NOOP
|
|
#define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define Z3_ENABLE_READ stepperZ3.isEnabled()
|
|
#else
|
|
#define Z3_ENABLE_INIT SET_OUTPUT(Z3_ENABLE_PIN)
|
|
#define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE)
|
|
#define Z3_ENABLE_READ READ(Z3_ENABLE_PIN)
|
|
#endif
|
|
#define Z3_DIR_INIT SET_OUTPUT(Z3_DIR_PIN)
|
|
#define Z3_DIR_WRITE(STATE) WRITE(Z3_DIR_PIN,STATE)
|
|
#define Z3_DIR_READ READ(Z3_DIR_PIN)
|
|
#endif
|
|
#define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN)
|
|
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
|
|
#define Z3_STEP_READ READ(Z3_STEP_PIN)
|
|
#else
|
|
#define Z3_DIR_WRITE(STATE) NOOP
|
|
#endif
|
|
|
|
// E0 Stepper
|
|
#if AXIS_DRIVER_TYPE_E0(L6470)
|
|
extern L6470 stepperE0;
|
|
#define E0_ENABLE_INIT NOOP
|
|
#define E0_ENABLE_WRITE(STATE) NOOP
|
|
#define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ)
|
|
#define E0_DIR_INIT NOOP
|
|
#define E0_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E0)
|
|
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E0)
|
|
extern TMC_CLASS(E0) stepperE0;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E0(TMC26X)
|
|
extern TMC26XStepper stepperE0;
|
|
#define E0_ENABLE_INIT NOOP
|
|
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
|
|
#define E0_ENABLE_READ stepperE0.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0)
|
|
#define E0_ENABLE_INIT NOOP
|
|
#define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E0_ENABLE_READ stepperE0.isEnabled()
|
|
#else
|
|
#define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN)
|
|
#define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE)
|
|
#define E0_ENABLE_READ READ(E0_ENABLE_PIN)
|
|
#endif
|
|
#define E0_DIR_INIT SET_OUTPUT(E0_DIR_PIN)
|
|
#define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE)
|
|
#define E0_DIR_READ READ(E0_DIR_PIN)
|
|
#endif
|
|
#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN)
|
|
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
|
|
#define E0_STEP_READ READ(E0_STEP_PIN)
|
|
|
|
// E1 Stepper
|
|
#if AXIS_DRIVER_TYPE_E1(L6470)
|
|
extern L6470 stepperE1;
|
|
#define E1_ENABLE_INIT NOOP
|
|
#define E1_ENABLE_WRITE(STATE) NOOP
|
|
#define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ)
|
|
#define E1_DIR_INIT NOOP
|
|
#define E1_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E1)
|
|
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E1)
|
|
extern TMC_CLASS(E1) stepperE1;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E1(TMC26X)
|
|
extern TMC26XStepper stepperE1;
|
|
#define E1_ENABLE_INIT NOOP
|
|
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
|
|
#define E1_ENABLE_READ stepperE1.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1)
|
|
#define E1_ENABLE_INIT NOOP
|
|
#define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E1_ENABLE_READ stepperE1.isEnabled()
|
|
#else
|
|
#define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN)
|
|
#define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE)
|
|
#define E1_ENABLE_READ READ(E1_ENABLE_PIN)
|
|
#endif
|
|
#define E1_DIR_INIT SET_OUTPUT(E1_DIR_PIN)
|
|
#define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE)
|
|
#define E1_DIR_READ READ(E1_DIR_PIN)
|
|
#endif
|
|
#define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN)
|
|
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
|
|
#define E1_STEP_READ READ(E1_STEP_PIN)
|
|
|
|
// E2 Stepper
|
|
#if AXIS_DRIVER_TYPE_E2(L6470)
|
|
extern L6470 stepperE2;
|
|
#define E2_ENABLE_INIT NOOP
|
|
#define E2_ENABLE_WRITE(STATE) NOOP
|
|
#define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ)
|
|
#define E2_DIR_INIT NOOP
|
|
#define E2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E2)
|
|
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E2)
|
|
extern TMC_CLASS(E2) stepperE2;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E2(TMC26X)
|
|
extern TMC26XStepper stepperE2;
|
|
#define E2_ENABLE_INIT NOOP
|
|
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
|
|
#define E2_ENABLE_READ stepperE2.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2)
|
|
#define E2_ENABLE_INIT NOOP
|
|
#define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E2_ENABLE_READ stepperE2.isEnabled()
|
|
#else
|
|
#define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN)
|
|
#define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE)
|
|
#define E2_ENABLE_READ READ(E2_ENABLE_PIN)
|
|
#endif
|
|
#define E2_DIR_INIT SET_OUTPUT(E2_DIR_PIN)
|
|
#define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE)
|
|
#define E2_DIR_READ READ(E2_DIR_PIN)
|
|
#endif
|
|
#define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN)
|
|
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
|
|
#define E2_STEP_READ READ(E2_STEP_PIN)
|
|
|
|
// E3 Stepper
|
|
#if AXIS_DRIVER_TYPE_E3(L6470)
|
|
extern L6470 stepperE3;
|
|
#define E3_ENABLE_INIT NOOP
|
|
#define E3_ENABLE_WRITE(STATE) NOOP
|
|
#define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ)
|
|
#define E3_DIR_INIT NOOP
|
|
#define E3_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E3)
|
|
#define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E3)
|
|
extern TMC_CLASS(E3) stepperE3;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E3(TMC26X)
|
|
extern TMC26XStepper stepperE3;
|
|
#define E3_ENABLE_INIT NOOP
|
|
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
|
|
#define E3_ENABLE_READ stepperE3.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3)
|
|
#define E3_ENABLE_INIT NOOP
|
|
#define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E3_ENABLE_READ stepperE3.isEnabled()
|
|
#else
|
|
#define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN)
|
|
#define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE)
|
|
#define E3_ENABLE_READ READ(E3_ENABLE_PIN)
|
|
#endif
|
|
#define E3_DIR_INIT SET_OUTPUT(E3_DIR_PIN)
|
|
#define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE)
|
|
#define E3_DIR_READ READ(E3_DIR_PIN)
|
|
#endif
|
|
#define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN)
|
|
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
|
|
#define E3_STEP_READ READ(E3_STEP_PIN)
|
|
|
|
// E4 Stepper
|
|
#if AXIS_DRIVER_TYPE_E4(L6470)
|
|
extern L6470 stepperE4;
|
|
#define E4_ENABLE_INIT NOOP
|
|
#define E4_ENABLE_WRITE(STATE) NOOP
|
|
#define E4_ENABLE_READ (stepperE4.getStatus() & STATUS_HIZ)
|
|
#define E4_DIR_INIT NOOP
|
|
#define E4_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E4)
|
|
#define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E4)
|
|
extern TMC_CLASS(E4) stepperE4;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E4(TMC26X)
|
|
extern TMC26XStepper stepperE4;
|
|
#define E4_ENABLE_INIT NOOP
|
|
#define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
|
|
#define E4_ENABLE_READ stepperE4.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4)
|
|
#define E4_ENABLE_INIT NOOP
|
|
#define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E4_ENABLE_READ stepperE4.isEnabled()
|
|
#else
|
|
#define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)
|
|
#define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE)
|
|
#define E4_ENABLE_READ READ(E4_ENABLE_PIN)
|
|
#endif
|
|
#define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN)
|
|
#define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE)
|
|
#define E4_DIR_READ READ(E4_DIR_PIN)
|
|
#endif
|
|
#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN)
|
|
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
|
|
#define E4_STEP_READ READ(E4_STEP_PIN)
|
|
|
|
// E5 Stepper
|
|
#if AXIS_DRIVER_TYPE_E5(L6470)
|
|
extern L6470 stepperE5;
|
|
#define E5_ENABLE_INIT NOOP
|
|
#define E5_ENABLE_WRITE(STATE) NOOP
|
|
#define E5_ENABLE_READ (stepperE5.getStatus() & STATUS_HIZ)
|
|
#define E5_DIR_INIT NOOP
|
|
#define E5_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E5)
|
|
#define E5_DIR_READ (stepperE5.getStatus() & STATUS_DIR)
|
|
#else
|
|
#if AXIS_IS_TMC(E5)
|
|
extern TMC_CLASS(E5) stepperE5;
|
|
#endif
|
|
#if AXIS_DRIVER_TYPE_E5(TMC26X)
|
|
extern TMC26XStepper stepperE5;
|
|
#define E5_ENABLE_INIT NOOP
|
|
#define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE)
|
|
#define E5_ENABLE_READ stepperE5.isEnabled()
|
|
#elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5)
|
|
#define E5_ENABLE_INIT NOOP
|
|
#define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
|
|
#define E5_ENABLE_READ stepperE5.isEnabled()
|
|
#else
|
|
#define E5_ENABLE_INIT SET_OUTPUT(E5_ENABLE_PIN)
|
|
#define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE)
|
|
#define E5_ENABLE_READ READ(E5_ENABLE_PIN)
|
|
#endif
|
|
#define E5_DIR_INIT SET_OUTPUT(E5_DIR_PIN)
|
|
#define E5_DIR_WRITE(STATE) WRITE(E5_DIR_PIN,STATE)
|
|
#define E5_DIR_READ READ(E5_DIR_PIN)
|
|
#endif
|
|
#define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN)
|
|
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
|
|
#define E5_STEP_READ READ(E5_STEP_PIN)
|
|
|
|
/**
|
|
* Extruder indirection for the single E axis
|
|
*/
|
|
#if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index
|
|
#if EXTRUDERS > 5
|
|
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0)
|
|
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); case 5: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
|
|
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); case 5: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
|
|
#elif EXTRUDERS > 4
|
|
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0)
|
|
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
|
|
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
|
|
#elif EXTRUDERS > 3
|
|
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
|
|
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
|
|
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
|
|
#elif EXTRUDERS > 2
|
|
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
|
|
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
|
|
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
|
|
#else
|
|
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
|
|
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(E ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0)
|
|
#define REV_E_DIR(E) do{ E0_DIR_WRITE(E ? !INVERT_E0_DIR : INVERT_E0_DIR); }while(0)
|
|
#endif
|
|
#elif ENABLED(PRUSA_MMU2)
|
|
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
|
|
#define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR)
|
|
#define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR)
|
|
|
|
#elif ENABLED(MK2_MULTIPLEXER) // One multiplexed stepper driver, reversed on odd index
|
|
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
|
|
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0)
|
|
#define REV_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0)
|
|
|
|
#elif E_STEPPERS > 1
|
|
|
|
#if E_STEPPERS > 5
|
|
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
|
|
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
|
|
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
|
|
#elif E_STEPPERS > 4
|
|
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
|
|
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
|
|
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
|
|
#elif E_STEPPERS > 3
|
|
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
|
|
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
|
|
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
|
|
#elif E_STEPPERS > 2
|
|
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
|
|
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
|
|
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
|
|
#else
|
|
#define _E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
|
|
#define _NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
|
|
#define _REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
|
|
#endif
|
|
|
|
#if HAS_DUPLICATION_MODE
|
|
|
|
#if ENABLED(MULTI_NOZZLE_DUPLICATION)
|
|
#define _DUPE(N,T,V) do{ if (TEST(duplication_e_mask, N)) E##N##_##T##_WRITE(V); }while(0)
|
|
#else
|
|
#define _DUPE(N,T,V) E##N##_##T##_WRITE(V)
|
|
#endif
|
|
|
|
#define NDIR(N) _DUPE(N,DIR,!INVERT_E##N##_DIR)
|
|
#define RDIR(N) _DUPE(N,DIR, INVERT_E##N##_DIR)
|
|
|
|
#define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { DUPE(STEP,V); } else _E_STEP_WRITE(E,V); }while(0)
|
|
|
|
#if E_STEPPERS > 2
|
|
#if E_STEPPERS > 5
|
|
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); }while(0)
|
|
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); } else _NORM_E_DIR(E); }while(0)
|
|
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); } else _REV_E_DIR(E); }while(0)
|
|
#elif E_STEPPERS > 4
|
|
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); }while(0)
|
|
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); } else _NORM_E_DIR(E); }while(0)
|
|
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); } else _REV_E_DIR(E); }while(0)
|
|
#elif E_STEPPERS > 3
|
|
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); }while(0)
|
|
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); } else _NORM_E_DIR(E); }while(0)
|
|
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); } else _REV_E_DIR(E); }while(0)
|
|
#else
|
|
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); }while(0)
|
|
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); } else _NORM_E_DIR(E); }while(0)
|
|
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); } else _REV_E_DIR(E); }while(0)
|
|
#endif
|
|
#else
|
|
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); } while(0)
|
|
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); } else _NORM_E_DIR(E); }while(0)
|
|
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); } else _REV_E_DIR(E); }while(0)
|
|
#endif
|
|
|
|
#else
|
|
|
|
#define E_STEP_WRITE(E,V) _E_STEP_WRITE(E,V)
|
|
#define NORM_E_DIR(E) _NORM_E_DIR(E)
|
|
#define REV_E_DIR(E) _REV_E_DIR(E)
|
|
|
|
#endif
|
|
|
|
#elif E_STEPPERS
|
|
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
|
|
#define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR)
|
|
#define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR)
|
|
|
|
#else
|
|
#define E_STEP_WRITE(E,V) NOOP
|
|
#define NORM_E_DIR(E) NOOP
|
|
#define REV_E_DIR(E) NOOP
|
|
|
|
#endif
|