175 lines
6.2 KiB
C
175 lines
6.2 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* PRINTRBOARD_G2
|
|
*/
|
|
|
|
#ifndef __SAM3X8E__
|
|
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
|
|
#endif
|
|
|
|
#ifndef BOARD_INFO_NAME
|
|
#define BOARD_INFO_NAME "PRINTRBOARD_G2"
|
|
#endif
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
//#define SERVO0_PIN -1
|
|
//#define SERVO1_PIN -1
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 22 // PB26
|
|
#define Y_MAX_PIN 18 // PA11
|
|
#define Z_MIN_PIN 19 // PA10
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 22
|
|
#endif
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
//#define FIL_RUNOUT_PIN 57 // PA22
|
|
#endif
|
|
#ifndef FIL_RUNOUT2_PIN
|
|
//#define FIL_RUNOUT2_PIN 21 // PB13
|
|
#endif
|
|
|
|
//
|
|
// LED defines
|
|
//
|
|
//#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
|
//#define NEOPIXEL_PIN 20 // LED driving pin on motherboard
|
|
//#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip
|
|
//#define SDA0 20 // PB12 NeoPixel pin I2C data
|
|
//#define SCL0 21 // PB13 I2C clock
|
|
|
|
// D0_12 #REF! (INDICATOR_LED)
|
|
// B28 JTAG-CLK
|
|
// B31 JTAG_TMS /SWD_DIO
|
|
//A18 INTERRUPT_OUT
|
|
//A12 USART_RX not used
|
|
//A13 USART_TX not used
|
|
//A14 UART_RTS
|
|
//A15 UART_CTS
|
|
//PB2 Unassigned
|
|
//PB4 to PB9 Unassigned
|
|
//#define UART_RX_PIN 0 // PA8 "RX0"
|
|
//#define UART_TX_PIN 1 // PA9 "TX0"
|
|
//#define UART_RTS_PIN 23 // PA14
|
|
//#define UART_CTS_PIN 24 // PA15
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define Z_STEP_PIN 73 // PA21 MOTOR 1
|
|
#define Z_DIR_PIN 75 // PA26
|
|
#define Z_ENABLE_PIN 74 // PA25
|
|
|
|
#define X_STEP_PIN 66 // PB15 MOTOR 2
|
|
#define X_DIR_PIN 54 // PA16
|
|
#define X_ENABLE_PIN 67 // PB16
|
|
|
|
#define Y_STEP_PIN 34 // PA29 MOTOR 3
|
|
#define Y_DIR_PIN 35 // PB1
|
|
#define Y_ENABLE_PIN 36 // PB0
|
|
|
|
#define E0_STEP_PIN 53 // PB14 MOTOR 4
|
|
#define E0_DIR_PIN 78 // PB23
|
|
#define E0_ENABLE_PIN 37 // PB22
|
|
|
|
// Microstepping mode pins
|
|
#define Z_MS1_PIN 52 // PB21 MODE0 MOTOR 1
|
|
#define Z_MS2_PIN 52 // PB21 MODE1
|
|
#define Z_MS3_PIN 65 // PB20 MODE2
|
|
|
|
#define X_MS1_PIN 43 // PA20 MODE0 MOTOR 2
|
|
#define X_MS2_PIN 43 // PA20 MODE1
|
|
#define X_MS3_PIN 42 // PA19 MODE2
|
|
|
|
#define Y_MS1_PIN 77 // PA28 MODE0 MOTOR 3
|
|
#define Y_MS2_PIN 77 // PA28 MODE1
|
|
#define Y_MS3_PIN 76 // PA27 MODE2
|
|
|
|
#define E0_MS1_PIN 38 // PB11 MODE0 MOTOR 4
|
|
#define E0_MS2_PIN 38 // PB11 MODE1
|
|
#define E0_MS3_PIN 39 // PB10 MODE2
|
|
|
|
// Motor current PWM pins
|
|
#define MOTOR_CURRENT_PWM_X_PIN 62 // PB17 MOTOR 1
|
|
#define MOTOR_CURRENT_PWM_Z_PIN 63 // PB18 MOTOR 2
|
|
#define MOTOR_CURRENT_PWM_Y_PIN 64 // PB19 MOTOR 3
|
|
#define MOTOR_CURRENT_PWM_E_PIN 61 // PA2 MOTOR 4
|
|
|
|
#define DEFAULT_PWM_MOTOR_CURRENT { 300, 400, 1000} // XY Z E0, 1000 = 1000mAh
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 2 // digital 56 PA23
|
|
#define TEMP_BED_PIN 5 // digital 59 PA4
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 40 // PA5
|
|
#define HEATER_BED_PIN 41 // PB24
|
|
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 13 // PB27 Fan1A
|
|
#endif
|
|
#define FAN1_PIN 58 // PA6 Fan1B
|
|
|
|
#define FET_SAFETY_PIN 31 // PA7 must be pulsed low every 50 mS or FETs are turned off
|
|
#define FET_SAFETY_DELAY 50 // 50 mS delay between pulses
|
|
#define FET_SAFETY_INVERTED true // true - negative going pulse of 2 uS
|
|
|
|
/////////////////////////////////////////////////////////
|
|
|
|
#define MISO_PIN 68 // set to unused pins for now
|
|
#define MOSI_PIN 69 // set to unused pins for now
|
|
#define SCK_PIN 70 // set to unused pins for now
|
|
#define SDSS 71 // set to unused pins for now
|
|
|
|
/**
|
|
* G2 uses 8 pins that are not available in the DUE environment:
|
|
* 34 PA29 - Y_STEP_PIN
|
|
* 35 PB1 - Y_DIR_PIN
|
|
* 36 PB0 - Y_ENABLE_PIN
|
|
* 37 PB22 - E0_ENABLE_PIN
|
|
* 38 PB11 - E0_MS1_PIN - normally used by the USB native port
|
|
* 39 PB10 - E0_MS3_PIN - normally used by the USB native port
|
|
* 40 PA5 - HEATER_0_PIN
|
|
* 41 PB24 - HEATER_BED_PIN
|
|
*
|
|
* None of these are in the arduino_due_x variant so digitalWrite and digitalRead can't be used on them.
|
|
*
|
|
* They can be accessed via FASTIO functions WRITE, READ, OUT_WRITE, OUTPUT, ...
|
|
*
|
|
*/
|