177 lines
5.6 KiB
C
177 lines
5.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MKS Robin mini (STM32F130VET6) board pin assignments
|
|
*/
|
|
|
|
#if NOT_TARGET(STM32F1, STM32F1xx)
|
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
|
#elif HOTENDS > 2 || E_STEPPERS > 2
|
|
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "Mingda MPX_ARM_MINI"
|
|
|
|
#define BOARD_NO_NATIVE_USB
|
|
#define DISABLE_DEBUG
|
|
|
|
//
|
|
// EEPROM
|
|
//
|
|
|
|
/*
|
|
//Mingda used an unknown EEPROM chip ATMLH753, so I turned on the emulation below.
|
|
//It is connected to EEPROM PB6 PB7
|
|
|
|
#define I2C_EEPROM
|
|
#undef NO_EEPROM_SELECTED
|
|
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
|
#define USE_SHARED_EEPROM 1 // Use Platform-independent Arduino functions for I2C EEPROM
|
|
#define E2END 0xFFFF // EEPROM end address AT24C256 (32kB)
|
|
*/
|
|
|
|
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
|
#define FLASH_EEPROM_EMULATION
|
|
#define EEPROM_PAGE_SIZE 0x800U // 2KB
|
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
|
#endif
|
|
|
|
#define SPI_DEVICE 2
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN PD6
|
|
#define X_MAX_PIN PG15
|
|
#define Y_MIN_PIN PG9
|
|
#define Y_MAX_PIN PG14
|
|
#define Z_MIN_PIN PG10
|
|
#define Z_MAX_PIN PG13
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN PG11
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_ENABLE_PIN PD13
|
|
#define X_STEP_PIN PD12
|
|
#define X_DIR_PIN PD11
|
|
|
|
#define Y_ENABLE_PIN PG4
|
|
#define Y_STEP_PIN PG3
|
|
#define Y_DIR_PIN PG2
|
|
|
|
#define Z_ENABLE_PIN PG7
|
|
#define Z_STEP_PIN PG6
|
|
#define Z_DIR_PIN PG5
|
|
|
|
#define E0_ENABLE_PIN PC7
|
|
#define E0_STEP_PIN PC6
|
|
#define E0_DIR_PIN PG8
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
//#define TEMP_0_PIN PF6 // THERM_E0
|
|
//#define TEMP_0_PIN PB3 // E0 K+
|
|
#define TEMP_BED_PIN PF7 // THERM_BED
|
|
|
|
#define MAX6675_SS_PIN PB5
|
|
#define MAX6675_SCK_PIN PB3
|
|
#define MAX6675_DO_PIN PB4
|
|
#define MAX6675_MOSI_PIN PA14
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN PB0
|
|
#define HEATER_BED_PIN PB1
|
|
|
|
#define FAN_PIN PA0 // FAN
|
|
|
|
//
|
|
// SD Card
|
|
//
|
|
#ifndef SDCARD_CONNECTION
|
|
#define SDCARD_CONNECTION ONBOARD
|
|
#endif
|
|
|
|
#define SDIO_SUPPORT
|
|
#define SDIO_CLOCK 4500000 // 4.5 MHz
|
|
#define SDIO_READ_RETRIES 16
|
|
|
|
#define SD_DETECT_PIN PC5
|
|
#define ONBOARD_SPI_DEVICE 1 // SPI1
|
|
#define ONBOARD_SD_CS_PIN PC10
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#define BEEPER_PIN PE4
|
|
|
|
/**
|
|
* Note: MKS Robin TFT screens use various TFT controllers.
|
|
* If the screen stays white, disable 'LCD_RESET_PIN'
|
|
* to let the bootloader init the screen.
|
|
*/
|
|
#if HAS_FSMC_TFT
|
|
/**
|
|
* Note: MKS Robin TFT screens use various TFT controllers
|
|
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
|
|
* ILI9488 is not supported
|
|
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
|
*
|
|
* If the screen stays white, disable 'TFT_RESET_PIN'
|
|
* to let the bootloader init the screen.
|
|
*
|
|
* Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu
|
|
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
|
*/
|
|
#define TFT_CS_PIN PD7 // NE4
|
|
#define TFT_RS_PIN PG0 // A0
|
|
|
|
#define FSMC_CS_PIN TFT_CS_PIN
|
|
#define FSMC_RS_PIN TFT_RS_PIN
|
|
|
|
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
|
#define FSMC_DMA_DEV DMA2
|
|
#define FSMC_DMA_CHANNEL DMA_CH5
|
|
|
|
#define TFT_RESET_PIN PF15
|
|
#define TFT_BACKLIGHT_PIN PF11
|
|
|
|
#define TOUCH_BUTTONS_HW_SPI
|
|
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
|
|
#endif
|
|
|
|
#if NEED_TOUCH_PINS
|
|
#define TOUCH_CS_PIN PA4 // SPI2_NSS
|
|
#define TOUCH_SCK_PIN PA5 // SPI2_SCK
|
|
#define TOUCH_MISO_PIN PA6 // SPI2_MISO
|
|
#define TOUCH_MOSI_PIN PA7 // SPI2_MOSI
|
|
#endif
|