161 lines
8 KiB
C
161 lines
8 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Finnish
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_FI_H
|
|
#define LANGUAGE_FI_H
|
|
|
|
#define MAPPER_C2C3
|
|
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
|
|
//#define SIMULATE_ROMFONT
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " valmis."
|
|
#define MSG_SD_INSERTED "Kortti asetettu"
|
|
#define MSG_SD_REMOVED "Kortti poistettu"
|
|
#define MSG_MAIN "Palaa"
|
|
#define MSG_AUTOSTART "Automaatti"
|
|
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
|
|
#define MSG_AUTO_HOME "Aja referenssiin"
|
|
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
|
#define MSG_LEVEL_BED_WAITING "Click to Begin"
|
|
#define MSG_LEVEL_BED_DONE "Leveling Done!"
|
|
#define MSG_LEVEL_BED_CANCEL "Cancel"
|
|
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
|
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
|
|
#define MSG_SET_ORIGIN "Aseta origo"
|
|
#define MSG_PREHEAT_PLA "Esilämmitä PLA"
|
|
#define MSG_PREHEAT_PLA_N "Esilämmitä PLA "
|
|
#define MSG_PREHEAT_PLA_ALL "Esilä. PLA Kaikki"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Esilä. PLA Alusta"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Esilämm. PLA konf"
|
|
#define MSG_PREHEAT_ABS "Esilämmitä ABS"
|
|
#define MSG_PREHEAT_ABS_N "Esilämmitä ABS "
|
|
#define MSG_PREHEAT_ABS_ALL "Esilä. ABS Kaikki"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Esilä. ABS Alusta"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Esilämm. ABS konf"
|
|
#define MSG_COOLDOWN "Jäähdytä"
|
|
#define MSG_SWITCH_PS_ON "Virta päälle"
|
|
#define MSG_SWITCH_PS_OFF "Virta pois"
|
|
#define MSG_EXTRUDE "Pursota"
|
|
#define MSG_RETRACT "Vedä takaisin"
|
|
#define MSG_MOVE_AXIS "Liikuta akseleita"
|
|
#define MSG_MOVE_X "Liikuta X"
|
|
#define MSG_MOVE_Y "Liikuta Y"
|
|
#define MSG_MOVE_Z "Liikuta Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_01MM "Liikuta 0.1mm"
|
|
#define MSG_MOVE_1MM "Liikuta 1mm"
|
|
#define MSG_MOVE_10MM "Liikuta 10mm"
|
|
#define MSG_SPEED "Nopeus"
|
|
#define MSG_NOZZLE "Suutin"
|
|
#define MSG_BED "Alusta"
|
|
#define MSG_FAN_SPEED "Tuul. nopeus"
|
|
#define MSG_FLOW "Virtaus"
|
|
#define MSG_CONTROL "Kontrolli"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " Kerr"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Kiihtyv"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VLiike min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-peruuta"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_TEMPERATURE "Lämpötila"
|
|
#define MSG_MOTION "Liike"
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
|
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
|
#define MSG_CONTRAST "LCD kontrasti"
|
|
#define MSG_STORE_EPROM "Tallenna muistiin"
|
|
#define MSG_LOAD_EPROM "Lataa muistista"
|
|
#define MSG_RESTORE_FAILSAFE "Palauta oletus"
|
|
#define MSG_REFRESH "Päivitä"
|
|
#define MSG_WATCH "Seuraa"
|
|
#define MSG_PREPARE "Valmistele"
|
|
#define MSG_TUNE "Säädä"
|
|
#define MSG_PAUSE_PRINT "Keskeytä tulostus"
|
|
#define MSG_RESUME_PRINT "Jatka tulostusta"
|
|
#define MSG_STOP_PRINT "Pysäytä tulostus"
|
|
#define MSG_CARD_MENU "Korttivalikko"
|
|
#define MSG_NO_CARD "Ei korttia"
|
|
#define MSG_DWELL "Nukkumassa..."
|
|
#define MSG_USERWAIT "Odotet. valintaa"
|
|
#define MSG_RESUMING "Jatke. tulostusta"
|
|
#define MSG_PRINT_ABORTED "Print aborted"
|
|
#define MSG_NO_MOVE "Ei liiketta."
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_CONTROL_RETRACT "Vedä mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Va. Vedä mm"
|
|
#define MSG_CONTROL_RETRACTF "Vedä V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoVeto."
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD-Card"
|
|
#define MSG_CNG_SDCARD "Change SD-Card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_YX_UNHOMED "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_END_HOUR "hours"
|
|
#define MSG_END_MINUTE "minutes"
|
|
|
|
#define MSG_DELTA_CALIBRATE "Delta Kalibrointi"
|
|
#define MSG_DELTA_CALIBRATE_X "Kalibroi X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Kalibroi Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Kalibroi Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Kalibroi Center"
|
|
|
|
#endif // LANGUAGE_FI_H
|