muele-marlin/Marlin/src/HAL/HAL_STM32F7
Bob-the-Kuhn 3d72fe0730 snapshot
2018-02-03 21:28:05 -06:00
..
EEPROM_Emul Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
EmulatedEeprom.cpp Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
endstop_interrupts.h Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
fastio_STM32F7.h Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
HAL_Servo_STM32F7.cpp snapshot 2018-02-03 21:28:05 -06:00
HAL_Servo_STM32F7.h Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
HAL_spi_STM32F7.cpp Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
HAL_STM32F7.cpp Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
HAL_STM32F7.h Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
HAL_timers_STM32F7.cpp Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
HAL_timers_STM32F7.h Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
persistent_store_impl.cpp Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
README.md Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
SanityCheck_STM32F7.h Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
spi_pins.h Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
TMC2660.cpp Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
TMC2660.h Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
watchdog_STM32F7.cpp Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
watchdog_STM32F7.h snapshot 2018-02-03 21:28:05 -06:00

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.