muele-marlin/Marlin/src/pins/stm32/pins_STM3R_MINI.h
2019-08-21 05:15:48 -05:00

286 lines
7.2 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
#endif
/**
* 21017 Victor Perez Marlin for stm32f1 test
*/
#define BOARD_INFO_NAME "STM3R Mini"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
// Enable I2C_EEPROM for testing
#define I2C_EEPROM
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Limit Switches
//
#define X_STOP_PIN PD0
#define Y_STOP_PIN PD1
#define Z_STOP_PIN PD4
//
// Steppers
//
#define X_STEP_PIN PE1
#define X_DIR_PIN PE0
#define X_ENABLE_PIN PC0
#define Y_STEP_PIN PE3
#define Y_DIR_PIN PE2
#define Y_ENABLE_PIN PC1
#define Z_STEP_PIN PE5
#define Z_DIR_PIN PE4
#define Z_ENABLE_PIN PC2
#define E0_STEP_PIN PE7
#define E0_DIR_PIN PE6
#define E0_ENABLE_PIN PC3
#define E1_STEP_PIN PE9
#define E1_DIR_PIN PE8
#define E1_ENABLE_PIN PC4
#define E2_STEP_PIN PE11
#define E2_DIR_PIN PE10
#define E2_ENABLE_PIN PC5
//
// Misc. Functions
//
#define SDSS PA15
#define LED_PIN PB2
//
// Heaters / Fans
//
#define HEATER_0_PIN PD12 // EXTRUDER 1
//#define HEATER_1_PIN PD13
#define HEATER_BED_PIN PB9 // BED
//#define HEATER_BED2_PIN -1 // BED2
//#define HEATER_BED3_PIN -1 // BED3
#ifndef FAN_PIN
#define FAN_PIN PD14
#endif
#define FAN1_PIN PD13
#define FAN_SOFT_PWM
//
// Temperature Sensors
//
#define TEMP_BED_PIN PA0
#define TEMP_0_PIN PA1
#define TEMP_1_PIN PA2
#define TEMP_2_PIN PA3
// Laser control
#if HAS_CUTTER
#define SPINDLE_LASER_PWM_PIN PB8
#define SPINDLE_LASER_ENA_PIN PD5
#endif
//
// LCD Pins
//
#if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#else
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 33
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#endif
#endif
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PB12 // SPI2_NSS
#define TOUCH_SCK_PIN PB13
#define TOUCH_MOSI_PIN PB14
#define TOUCH_MISO_PIN PB15
#define TOUCH_INT_PIN PC6 // (PenIRQ coming from ADS7843)
#elif ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif ANY(VIKI2, miniVIKI)
#define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44
#define DOGLCD_CS 45
#define LCD_SCREEN_ROT_180
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39
#define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35
#define BTN_EN2 37
#define BTN_ENC 31
#define SD_DETECT_PIN 49
#define LCD_SDSS 53
#define KILL_PIN 41
#define BEEPER_PIN 23
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define LCD_BACKLIGHT_PIN 33
#elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44
#define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53
#define KILL_PIN 64
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// The encoder and click button
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
// not connected to a pin
#define SD_DETECT_PIN 49
#else
// Beeper on AUX-4
#define BEEPER_PIN 33
// Buttons directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif
#endif
#endif // NEWPANEL
#endif // HAS_SPI_LCD