muele-marlin/Marlin/src/pins/stm32f1/pins_STM32F1R.h
2020-12-30 22:00:36 -06:00

141 lines
4.2 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
/**
* 21017 Victor Perez Marlin for stm32f1 test
*/
#define BOARD_INFO_NAME "Misc. STM32F1R"
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Limit Switches
//
#define X_STOP_PIN PB3
#define Y_STOP_PIN PB4
#define Z_STOP_PIN PB5
//
// Steppers
//
#define X_STEP_PIN PC0
#define X_DIR_PIN PC1
#define X_ENABLE_PIN PA8
#define Y_STEP_PIN PC2
#define Y_DIR_PIN PC3
#define Y_ENABLE_PIN PA8
#define Z_STEP_PIN PC4
#define Z_DIR_PIN PC5
#define Z_ENABLE_PIN PA8
#define E0_STEP_PIN PC6
#define E0_DIR_PIN PC7
#define E0_ENABLE_PIN PA8
/**
* TODO: Currently using same Enable pin to all steppers.
*/
#define E1_STEP_PIN PC8
#define E1_DIR_PIN PC9
#define E1_ENABLE_PIN PA8
#define E2_STEP_PIN PC10
#define E2_DIR_PIN PC11
#define E2_ENABLE_PIN PA8
//
// Misc. Functions
//
#define SDSS PA4
#define LED_PIN PD2
//
// Heaters / Fans
//
#define HEATER_0_PIN PB0 // EXTRUDER 1
#define HEATER_1_PIN PB1
#define HEATER_BED_PIN PA3 // BED
//
// Temperature Sensors
//
#define TEMP_BED_PIN PA0 // Analog Input
#define TEMP_0_PIN PA1 // Analog Input
#define TEMP_1_PIN PA2 // Analog Input
//
// LCD Pins
//
#if HAS_WIRED_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
#else
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if !IS_NEWPANEL
#error "Non-NEWPANEL LCD is not supported."
#endif
#endif
#if IS_NEWPANEL
#if IS_RRD_SC
#error "RRD Smart Controller is not supported."
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
#elif ENABLED(LCD_I2C_PANELOLU2)
#error "LCD_I2C_PANELOLU2 is not supported."
#elif ENABLED(LCD_I2C_VIKI)
#error "LCD_I2C_VIKI is not supported."
#elif ANY(VIKI2, miniVIKI)
#error "VIKI2 / miniVIKI is not supported."
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
#elif ENABLED(MINIPANEL)
#error "MINIPANEL is not supported."
#else
#error "Other generic NEWPANEL LCD is not supported."
#endif
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif // HAS_WIRED_LCD