| .. |
|
Gen7
|
Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604
|
2012-11-11 11:17:54 +01:00 |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE
|
2012-02-17 11:41:47 +01:00 |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
2012-02-26 17:35:01 +01:00 |
|
cardreader.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
cardreader.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
Configuration.h
|
Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).
|
2012-12-08 10:49:01 -08:00 |
|
Configuration_adv.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
2012-12-06 10:36:07 +01:00 |
|
ConfigurationStore.cpp
|
Fixed #317
|
2012-11-24 17:32:30 +01:00 |
|
ConfigurationStore.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
COPYING
|
first commit
|
2011-08-12 22:28:35 +02:00 |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
2012-03-11 12:25:04 +01:00 |
|
createTemperatureLookupMarlin.py
|
Added new temperature lookup table creation tool. This one uses stein hart-hart equations.
|
2012-11-16 23:51:05 +01:00 |
|
fastio.h
|
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
|
2012-12-08 15:16:38 -08:00 |
|
language.h
|
I hope last changes to french translation
|
2012-11-18 22:34:56 +01:00 |
|
LCD Menu Tree.pdf
|
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
|
2012-08-29 21:08:41 +01:00 |
|
LiquidCrystalRus.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
2012-11-06 12:06:41 +01:00 |
|
LiquidCrystalRus.h
|
Enables support the Cyrillic alphabet for LCD
|
2012-10-12 19:06:43 +04:00 |
|
Makefile
|
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
|
2012-12-08 11:49:53 +01:00 |
|
Marlin.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
Marlin.pde
|
Mistake there, not sure why I did that. My bad.
|
2012-12-05 20:23:13 +01:00 |
|
Marlin_main.cpp
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
2012-12-05 19:32:02 +01:00 |
|
MarlinSerial.cpp
|
Make serial port configurable.
|
2012-11-05 21:34:27 +11:00 |
|
MarlinSerial.h
|
Clean up special serial port cases
|
2012-11-07 09:00:21 +11:00 |
|
Menu Plans.xlsx
|
Tidy up
|
2012-08-29 22:53:41 +01:00 |
|
motion_control.cpp
|
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
|
2012-08-10 19:36:30 +01:00 |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
2011-11-27 21:12:55 +01:00 |
|
pins.h
|
Improved formatting and comments for consistency.
|
2012-12-08 20:15:53 -08:00 |
|
planner.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
2012-05-09 08:05:13 +03:00 |
|
Sd2Card.cpp
|
Fix for a few -Wextra warnings.
|
2012-11-12 15:35:28 +01:00 |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
SdBaseFile.cpp
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
2012-11-28 10:30:34 +01:00 |
|
SdBaseFile.h
|
Added long filename support.
|
2012-08-22 14:49:57 +02:00 |
|
SdFatConfig.h
|
Added long filename support.
|
2012-08-22 14:49:57 +02:00 |
|
SdFatStructs.h
|
Added long filename support.
|
2012-08-22 14:49:57 +02:00 |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
2012-02-11 16:02:47 +01:00 |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
SdFile.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
2012-11-06 12:06:41 +01:00 |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
speed_lookuptable.h
|
Made the 2nd speed lookup table condition more explicit.
|
2012-11-11 12:02:48 +01:00 |
|
stepper.cpp
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
2012-12-05 19:32:26 +01:00 |
|
stepper.h
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
2012-11-28 10:30:34 +01:00 |
|
temperature.cpp
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
2012-12-06 10:36:07 +01:00 |
|
temperature.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
2012-12-06 10:36:07 +01:00 |
|
thermistortables.h
|
allow marlin internal 0°C represenation
|
2012-11-13 14:37:08 +01:00 |
|
ultralcd.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
ultralcd.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
watchdog.cpp
|
Fix compiling the watchdog error message when the manual reset watchdog is used.
|
2012-12-06 10:27:50 +01:00 |
|
watchdog.h
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
2012-11-06 12:06:41 +01:00 |
|
wiring.h
|
add wiring.h, that can be used to overwrite:
|
2011-12-22 14:57:28 +01:00 |
