711 lines
57 KiB
C++
711 lines
57 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* English
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define en 1234
|
|
#if LCD_LANGUAGE == en
|
|
#define NOT_EXTENDED_ISO10646_1_5X7
|
|
#endif
|
|
#undef en
|
|
|
|
namespace Language_en {
|
|
constexpr uint8_t CHARSIZE = 2;
|
|
PROGMEM Language_Str LANGUAGE = _UxGT("English");
|
|
|
|
#ifdef NOT_EXTENDED_ISO10646_1_5X7
|
|
PROGMEM Language_Str MSG_CUBED = _UxGT("^3");
|
|
#else
|
|
PROGMEM Language_Str MSG_CUBED = _UxGT("³");
|
|
#endif
|
|
|
|
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" Ready.");
|
|
PROGMEM Language_Str MSG_YES = _UxGT("YES");
|
|
PROGMEM Language_Str MSG_NO = _UxGT("NO");
|
|
PROGMEM Language_Str MSG_BACK = _UxGT("Back");
|
|
PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("Aborting...");
|
|
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Media Inserted");
|
|
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Media Removed");
|
|
PROGMEM Language_Str MSG_MEDIA_RELEASED = _UxGT("Media Released");
|
|
PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("Waiting for media");
|
|
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("Media read error");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB device removed");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB start failed");
|
|
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters
|
|
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("Soft Endstops");
|
|
PROGMEM Language_Str MSG_MAIN = _UxGT("Main");
|
|
PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("Advanced Settings");
|
|
PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("Configuration");
|
|
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("Autostart");
|
|
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Disable Steppers");
|
|
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Debug Menu");
|
|
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Progress Bar Test");
|
|
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Auto Home");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Home X");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Home Y");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Home Z");
|
|
PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Auto Z-Align");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Homing XYZ");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Click to Begin");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Next Point");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Leveling Done!");
|
|
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("Fade Height");
|
|
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Set Home Offsets");
|
|
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Offsets Applied");
|
|
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Set Origin");
|
|
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Preheat ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H0 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H1 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H2 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H3 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H4 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H5 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E0 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E1 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E2 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E3 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E4 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E5 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" All");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Bed");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Conf");
|
|
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("Preheat ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H0 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H1 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H2 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H3 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H4 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H5 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E0 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E1 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E2 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E3 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E4 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E5 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" All");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Bed");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Conf");
|
|
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("Preheat Custom");
|
|
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Cooldown");
|
|
PROGMEM Language_Str MSG_LASER_MENU = _UxGT("Laser Control");
|
|
PROGMEM Language_Str MSG_LASER_OFF = _UxGT("Laser Off");
|
|
PROGMEM Language_Str MSG_LASER_ON = _UxGT("Laser On");
|
|
PROGMEM Language_Str MSG_LASER_POWER = _UxGT("Laser Power");
|
|
PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("Spindle Control");
|
|
PROGMEM Language_Str MSG_SPINDLE_OFF = _UxGT("Spindle Off");
|
|
PROGMEM Language_Str MSG_SPINDLE_ON = _UxGT("Spindle On");
|
|
PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("Spindle Power");
|
|
PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("Spindle Reverse");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Switch Power On");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Switch Power Off");
|
|
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extrude");
|
|
PROGMEM Language_Str MSG_RETRACT = _UxGT("Retract");
|
|
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Move Axis");
|
|
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Bed Leveling");
|
|
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Level Bed");
|
|
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Level Corners");
|
|
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Next Corner");
|
|
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Mesh Editor");
|
|
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Edit Mesh");
|
|
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("Mesh Editing Stopped");
|
|
PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("Probing Point");
|
|
PROGMEM Language_Str MSG_MESH_X = _UxGT("Index X");
|
|
PROGMEM Language_Str MSG_MESH_Y = _UxGT("Index Y");
|
|
PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Z Value");
|
|
PROGMEM Language_Str MSG_USER_MENU = _UxGT("Custom Commands");
|
|
PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48 Probe Test");
|
|
PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48 Point");
|
|
PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("Deviation");
|
|
PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("IDEX Mode");
|
|
PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("Tool Offsets");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("Auto-Park");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplication");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Mirrored Copy");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("Full Control");
|
|
PROGMEM Language_Str MSG_X_OFFSET = _UxGT("2nd Nozzle X");
|
|
PROGMEM Language_Str MSG_Y_OFFSET = _UxGT("2nd Nozzle Y");
|
|
PROGMEM Language_Str MSG_Z_OFFSET = _UxGT("2nd Nozzle Z");
|
|
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("Doing G29");
|
|
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL Tools");
|
|
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling");
|
|
PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("Tilting Point");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("Manually Build Mesh");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("Place Shim & Measure");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("Measure");
|
|
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("Remove & Measure Bed");
|
|
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("Moving to next");
|
|
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("Activate UBL");
|
|
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("Deactivate UBL");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("Bed Temp");
|
|
PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Bed Temp");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("Hotend Temp");
|
|
PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Hotend Temp");
|
|
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("Mesh Edit");
|
|
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("Edit Custom Mesh");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("Fine Tuning Mesh");
|
|
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("Done Editing Mesh");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Build Custom Mesh");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("Build Mesh");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M1 = _UxGT("Build Mesh (") PREHEAT_1_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M2 = _UxGT("Build Mesh (") PREHEAT_2_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("Build Cold Mesh");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Adjust Mesh Height");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Height Amount");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Validate Mesh");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("Validate Mesh (") PREHEAT_1_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("Validate Mesh (") PREHEAT_2_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Validate Custom Mesh");
|
|
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 Heating Bed");
|
|
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 Heating Nozzle");
|
|
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Manual priming...");
|
|
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("Fixed Length Prime");
|
|
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("Done Priming");
|
|
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26 Canceled");
|
|
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("Leaving G26");
|
|
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("Continue Bed Mesh");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("Mesh Leveling");
|
|
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("3-Point Leveling");
|
|
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("Grid Mesh Leveling");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("Level Mesh");
|
|
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("Side Points");
|
|
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("Map Type");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("Output Mesh Map");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("Output for Host");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("Output for CSV");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Off Printer Backup");
|
|
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("Output UBL Info");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("Fill-in Amount");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("Manual Fill-in");
|
|
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("Smart Fill-in");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("Fill-in Mesh");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("Invalidate All");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Invalidate Closest");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("Fine Tune All");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Fine Tune Closest");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("Mesh Storage");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Memory Slot");
|
|
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Load Bed Mesh");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Save Bed Mesh");
|
|
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 Mesh %i Loaded");
|
|
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 Mesh %i Saved");
|
|
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("No Storage");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Err: UBL Save");
|
|
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Err: UBL Restore");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z-Offset: ");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z-Offset Stopped");
|
|
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("Step-By-Step UBL");
|
|
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. Build Cold Mesh");
|
|
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2. Smart Fill-in");
|
|
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. Validate Mesh");
|
|
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4. Fine Tune All");
|
|
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5. Validate Mesh");
|
|
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. Fine Tune All");
|
|
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7. Save Bed Mesh");
|
|
|
|
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("LED Control");
|
|
PROGMEM Language_Str MSG_LEDS = _UxGT("Lights");
|
|
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("Light Presets");
|
|
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("Red");
|
|
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("Orange");
|
|
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("Yellow");
|
|
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("Green");
|
|
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("Blue");
|
|
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("Indigo");
|
|
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("Violet");
|
|
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("White");
|
|
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("Default");
|
|
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("Custom Lights");
|
|
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("Red Intensity");
|
|
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("Green Intensity");
|
|
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("Blue Intensity");
|
|
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("White Intensity");
|
|
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("Brightness");
|
|
|
|
PROGMEM Language_Str MSG_MOVING = _UxGT("Moving...");
|
|
PROGMEM Language_Str MSG_FREE_XY = _UxGT("Free XY");
|
|
PROGMEM Language_Str MSG_MOVE_X = _UxGT("Move X");
|
|
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Move Y");
|
|
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Move Z");
|
|
PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder");
|
|
PROGMEM Language_Str MSG_MOVE_E0 = _UxGT("Extruder ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_MOVE_E1 = _UxGT("Extruder ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_MOVE_E2 = _UxGT("Extruder ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_MOVE_E3 = _UxGT("Extruder ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_MOVE_E4 = _UxGT("Extruder ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_MOVE_E5 = _UxGT("Extruder ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Hotend too cold");
|
|
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Move %smm");
|
|
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Move 0.1mm");
|
|
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Move 1mm");
|
|
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Move 10mm");
|
|
PROGMEM Language_Str MSG_SPEED = _UxGT("Speed");
|
|
PROGMEM Language_Str MSG_BED_Z = _UxGT("Bed Z");
|
|
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Nozzle");
|
|
PROGMEM Language_Str MSG_NOZZLE_0 = _UxGT("Nozzle ") LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_NOZZLE_1 = _UxGT("Nozzle ") LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_NOZZLE_2 = _UxGT("Nozzle ") LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_NOZZLE_3 = _UxGT("Nozzle ") LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_NOZZLE_4 = _UxGT("Nozzle ") LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_NOZZLE_5 = _UxGT("Nozzle ") LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
|
|
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure");
|
|
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Speed");
|
|
PROGMEM Language_Str MSG_FAN_SPEED_1 = _UxGT("Fan Speed 1");
|
|
PROGMEM Language_Str MSG_FAN_SPEED_2 = _UxGT("Fan Speed 2");
|
|
PROGMEM Language_Str MSG_FAN_SPEED_3 = _UxGT("Fan Speed 3");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra Fan Speed");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_1 = _UxGT("Extra Fan Speed 1");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_2 = _UxGT("Extra Fan Speed 2");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_3 = _UxGT("Extra Fan Speed 3");
|
|
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
|
|
PROGMEM Language_Str MSG_FLOW_0 = _UxGT("Flow ") LCD_STR_N0;
|
|
PROGMEM Language_Str MSG_FLOW_1 = _UxGT("Flow ") LCD_STR_N1;
|
|
PROGMEM Language_Str MSG_FLOW_2 = _UxGT("Flow ") LCD_STR_N2;
|
|
PROGMEM Language_Str MSG_FLOW_3 = _UxGT("Flow ") LCD_STR_N3;
|
|
PROGMEM Language_Str MSG_FLOW_4 = _UxGT("Flow ") LCD_STR_N4;
|
|
PROGMEM Language_Str MSG_FLOW_5 = _UxGT("Flow ") LCD_STR_N5;
|
|
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");
|
|
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
|
|
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
|
|
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact");
|
|
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp");
|
|
PROGMEM Language_Str MSG_LCD_ON = _UxGT("On");
|
|
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Off");
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID = _UxGT("PID Autotune");
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E0 = _UxGT("PID Autotune ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E1 = _UxGT("PID Autotune ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E2 = _UxGT("PID Autotune ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E3 = _UxGT("PID Autotune ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E4 = _UxGT("PID Autotune ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_AUTOTUNE_PID_E5 = _UxGT("PID Autotune ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
|
|
PROGMEM Language_Str MSG_PID_P_E0 = _UxGT("PID-P ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_PID_P_E1 = _UxGT("PID-P ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_PID_P_E2 = _UxGT("PID-P ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_PID_P_E3 = _UxGT("PID-P ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_PID_P_E4 = _UxGT("PID-P ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_PID_P_E5 = _UxGT("PID-P ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
|
|
PROGMEM Language_Str MSG_PID_I_E0 = _UxGT("PID-I ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_PID_I_E1 = _UxGT("PID-I ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_PID_I_E2 = _UxGT("PID-I ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_PID_I_E3 = _UxGT("PID-I ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_PID_I_E4 = _UxGT("PID-I ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_PID_I_E5 = _UxGT("PID-I ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
|
|
PROGMEM Language_Str MSG_PID_D_E0 = _UxGT("PID-D ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_PID_D_E1 = _UxGT("PID-D ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_PID_D_E2 = _UxGT("PID-D ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_PID_D_E3 = _UxGT("PID-D ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_PID_D_E4 = _UxGT("PID-D ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_PID_D_E5 = _UxGT("PID-D ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
|
|
PROGMEM Language_Str MSG_PID_C_E0 = _UxGT("PID-C ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_PID_C_E1 = _UxGT("PID-C ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_PID_C_E2 = _UxGT("PID-C ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_PID_C_E3 = _UxGT("PID-C ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_PID_C_E4 = _UxGT("PID-C ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_PID_C_E5 = _UxGT("PID-C ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_SELECT = _UxGT("Select");
|
|
PROGMEM Language_Str MSG_SELECT_E0 = _UxGT("Select ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_SELECT_E1 = _UxGT("Select ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_SELECT_E2 = _UxGT("Select ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_SELECT_E3 = _UxGT("Select ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_SELECT_E4 = _UxGT("Select ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_SELECT_E5 = _UxGT("Select ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_ACC = _UxGT("Accel");
|
|
PROGMEM Language_Str MSG_JERK = _UxGT("Jerk");
|
|
PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk");
|
|
PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Jerk");
|
|
PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Jerk");
|
|
PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk");
|
|
PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev");
|
|
PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocity");
|
|
PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A;
|
|
PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B;
|
|
PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C;
|
|
PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E;
|
|
PROGMEM Language_Str MSG_VMAX_E0 = _UxGT("Vmax ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_VMAX_E1 = _UxGT("Vmax ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_VMAX_E2 = _UxGT("Vmax ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_VMAX_E3 = _UxGT("Vmax ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_VMAX_E4 = _UxGT("Vmax ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_VMAX_E5 = _UxGT("Vmax ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin");
|
|
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VTrav Min");
|
|
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Acceleration");
|
|
PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A;
|
|
PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B;
|
|
PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C;
|
|
PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E;
|
|
PROGMEM Language_Str MSG_AMAX_E0 = _UxGT("Amax ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_AMAX_E1 = _UxGT("Amax ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_AMAX_E2 = _UxGT("Amax ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_AMAX_E3 = _UxGT("Amax ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_AMAX_E4 = _UxGT("Amax ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_AMAX_E5 = _UxGT("Amax ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Retract");
|
|
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-Travel");
|
|
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Steps/mm");
|
|
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E_STEPS = _UxGT("Esteps/mm");
|
|
PROGMEM Language_Str MSG_E0_STEPS = LCD_STR_E0 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E1_STEPS = LCD_STR_E1 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E2_STEPS = LCD_STR_E2 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E3_STEPS = LCD_STR_E3 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E4_STEPS = LCD_STR_E4 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_E5_STEPS = LCD_STR_E5 _UxGT("steps/mm");
|
|
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperature");
|
|
PROGMEM Language_Str MSG_MOTION = _UxGT("Motion");
|
|
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm³");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E0 = _UxGT("Fil. Dia. ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E1 = _UxGT("Fil. Dia. ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E2 = _UxGT("Fil. Dia. ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E3 = _UxGT("Fil. Dia. ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E4 = _UxGT("Fil. Dia. ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E5 = _UxGT("Fil. Dia. ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Unload mm");
|
|
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Load mm");
|
|
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E0 = _UxGT("Advance K ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E1 = _UxGT("Advance K ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E2 = _UxGT("Advance K ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E3 = _UxGT("Advance K ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E4 = _UxGT("Advance K ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E5 = _UxGT("Advance K ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD Contrast");
|
|
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Store Settings");
|
|
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Load Settings");
|
|
PROGMEM Language_Str MSG_RESTORE_FAILSAFE = _UxGT("Restore failsafe");
|
|
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("Initialize EEPROM");
|
|
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("Media Update");
|
|
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("Reset Printer");
|
|
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Refresh");
|
|
PROGMEM Language_Str MSG_WATCH = _UxGT("Info Screen");
|
|
PROGMEM Language_Str MSG_PREPARE = _UxGT("Prepare");
|
|
PROGMEM Language_Str MSG_TUNE = _UxGT("Tune");
|
|
PROGMEM Language_Str MSG_START_PRINT = _UxGT("Start Print");
|
|
PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("Next");
|
|
PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("Init");
|
|
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("Stop");
|
|
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("Print");
|
|
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Reset");
|
|
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Cancel");
|
|
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Done");
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause Print");
|
|
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Resume Print");
|
|
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop Print");
|
|
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Cancel Object");
|
|
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Outage Recovery");
|
|
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print from Media");
|
|
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("No Media");
|
|
PROGMEM Language_Str MSG_DWELL = _UxGT("Sleep...");
|
|
PROGMEM Language_Str MSG_USERWAIT = _UxGT("Click to Resume...");
|
|
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("Print Paused");
|
|
PROGMEM Language_Str MSG_PRINTING = _UxGT("Printing...");
|
|
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print Aborted");
|
|
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("No Move.");
|
|
PROGMEM Language_Str MSG_KILLED = _UxGT("KILLED. ");
|
|
PROGMEM Language_Str MSG_STOPPED = _UxGT("STOPPED. ");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Retract mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Swap Re.mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Retract V");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("UnRet mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("S UnRet mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("UnRet V");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V");
|
|
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr.");
|
|
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("Swap Length");
|
|
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Purge Length");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Tool Change");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z Raise");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Prime Speed");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Retract Speed");
|
|
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Nozzle Standby");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Change Filament");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E0 = _UxGT("Change Filament ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E1 = _UxGT("Change Filament ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E2 = _UxGT("Change Filament ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E3 = _UxGT("Change Filament ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E4 = _UxGT("Change Filament ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E5 = _UxGT("Change Filament ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Load Filament");
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E0 = _UxGT("Load Filament ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E1 = _UxGT("Load Filament ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E2 = _UxGT("Load Filament ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E3 = _UxGT("Load Filament ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E4 = _UxGT("Load Filament ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E5 = _UxGT("Load Filament ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Unload Filament");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E0 = _UxGT("Unload Filament ") LCD_STR_E0;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E1 = _UxGT("Unload Filament ") LCD_STR_E1;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E2 = _UxGT("Unload Filament ") LCD_STR_E2;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E3 = _UxGT("Unload Filament ") LCD_STR_E3;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E4 = _UxGT("Unload Filament ") LCD_STR_E4;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E5 = _UxGT("Unload Filament ") LCD_STR_E5;
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Unload All");
|
|
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("Init. Media");
|
|
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Change Media");
|
|
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("Release Media");
|
|
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z Probe Past Bed");
|
|
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Skew Factor");
|
|
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
|
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
|
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow");
|
|
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("DANGER: Bad settings can cause damage! Proceed anyway?");
|
|
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("Init TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test");
|
|
PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT("Save");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Deploy TouchMI");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("Deploy Z-Probe");
|
|
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("Stow Z-Probe");
|
|
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s First");
|
|
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Probe Z Offset");
|
|
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystep X");
|
|
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystep Y");
|
|
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystep Z");
|
|
PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("Total");
|
|
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Endstop Abort");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Heating Failed");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED = _UxGT("Bed Heating Failed");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER = _UxGT("Chamber Heating Fail");
|
|
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Err: REDUNDANT TEMP");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("THERMAL RUNAWAY");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("BED THERMAL RUNAWAY");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: MAXTEMP BED");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: MINTEMP BED");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err: MAXTEMP CHAMBER");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err: MINTEMP CHAMBER");
|
|
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("Home XY First");
|
|
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED");
|
|
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Please Reset");
|
|
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only
|
|
PROGMEM Language_Str MSG_HEATING = _UxGT("Heating...");
|
|
PROGMEM Language_Str MSG_COOLING = _UxGT("Cooling...");
|
|
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Bed Heating...");
|
|
PROGMEM Language_Str MSG_BED_COOLING = _UxGT("Bed Cooling...");
|
|
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("Chamber Heating...");
|
|
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("Chamber Cooling...");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Calibration");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Calibrate X");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Calibrate Y");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Calibrate Z");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Calibrate Center");
|
|
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("Delta Settings");
|
|
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto Calibration");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Set Delta Height");
|
|
PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT("Probe Z-offset");
|
|
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("Diag Rod");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("Height");
|
|
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("Radius");
|
|
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("About Printer");
|
|
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("Printer Info");
|
|
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("3-Point Leveling");
|
|
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("Linear Leveling");
|
|
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("Bilinear Leveling");
|
|
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("Unified Bed Leveling");
|
|
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("Mesh Leveling");
|
|
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Printer Stats");
|
|
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Board Info");
|
|
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors");
|
|
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("Extruders");
|
|
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("Baud");
|
|
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protocol");
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("Runaway Watch: OFF");
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("Runaway Watch: ON");
|
|
|
|
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Case Light");
|
|
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Light Brightness");
|
|
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("INCORRECT PRINTER");
|
|
|
|
#if LCD_WIDTH >= 20
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Print Count");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Completed");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total Print time");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Longest Job Time");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extruded Total");
|
|
#else
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Prints");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Completed");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Longest");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extruded");
|
|
#endif
|
|
|
|
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
|
|
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp");
|
|
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU");
|
|
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Drive Strength");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT = _UxGT("Driver %");
|
|
PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CONNECTION ERROR");
|
|
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Write");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("FILAMENT CHANGE");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("PRINT PAUSED");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("LOAD FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("UNLOAD FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("RESUME OPTIONS:");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Purge more");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Continue");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Nozzle: ");
|
|
PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("Runout Sensor");
|
|
PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("Runout Dist mm");
|
|
PROGMEM Language_Str MSG_LCD_HOMING_FAILED = _UxGT("Homing Failed");
|
|
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("Probing Failed");
|
|
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: Too Cold");
|
|
|
|
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("CHOOSE FILAMENT");
|
|
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
|
|
PROGMEM Language_Str MSG_MMU2_WRONG_FIRMWARE = _UxGT("Update MMU Firmware!");
|
|
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU Needs Attention.");
|
|
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Resume Print");
|
|
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Resuming...");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Load Filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Load All");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Load to Nozzle");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Eject Filament");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT0 = _UxGT("Eject Filament 1");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT1 = _UxGT("Eject Filament 2");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT2 = _UxGT("Eject Filament 3");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT3 = _UxGT("Eject Filament 4");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT4 = _UxGT("Eject Filament 5");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Unload Filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Loading Fil. %i...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Ejecting Fil. ...");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Unloading Fil....");
|
|
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("All");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT0 = _UxGT("Filament 1");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT1 = _UxGT("Filament 2");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT2 = _UxGT("Filament 3");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT3 = _UxGT("Filament 4");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT4 = _UxGT("Filament 5");
|
|
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Reset MMU");
|
|
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("Resetting MMU...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("Remove, click");
|
|
|
|
PROGMEM Language_Str MSG_MIX = _UxGT("Mix");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_1 = _UxGT("Component 1");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_2 = _UxGT("Component 2");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_3 = _UxGT("Component 3");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_4 = _UxGT("Component 4");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_5 = _UxGT("Component 5");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_6 = _UxGT("Component 6");
|
|
PROGMEM Language_Str MSG_MIXER = _UxGT("Mixer");
|
|
PROGMEM Language_Str MSG_GRADIENT = _UxGT("Gradient");
|
|
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("Full Gradient");
|
|
PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT("Toggle Mix");
|
|
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("Cycle Mix");
|
|
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("Gradient Mix");
|
|
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("Reverse Gradient");
|
|
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("Active V-tool");
|
|
PROGMEM Language_Str MSG_START_VTOOL = _UxGT("Start V-tool");
|
|
PROGMEM Language_Str MSG_END_VTOOL = _UxGT(" End V-tool");
|
|
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("Alias V-tool");
|
|
PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT("Reset V-tools");
|
|
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("Commit V-tool Mix");
|
|
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("V-tools Were Reset");
|
|
PROGMEM Language_Str MSG_START_Z = _UxGT("Start Z:");
|
|
PROGMEM Language_Str MSG_END_Z = _UxGT(" End Z:");
|
|
|
|
PROGMEM Language_Str MSG_GAMES = _UxGT("Games");
|
|
PROGMEM Language_Str MSG_BRICKOUT = _UxGT("Brickout");
|
|
PROGMEM Language_Str MSG_INVADERS = _UxGT("Invaders");
|
|
PROGMEM Language_Str MSG_SNAKE = _UxGT("Sn4k3");
|
|
PROGMEM Language_Str MSG_MAZE = _UxGT("Maze");
|
|
|
|
#define MSG_1_LINE(A) A "\0" "\0"
|
|
#define MSG_2_LINE(A,B) A "\0" B "\0"
|
|
#define MSG_3_LINE(A,B,C) A "\0" B "\0" C
|
|
|
|
//
|
|
// Filament Change screens show up to 3 lines on a 4-line display
|
|
// ...or up to 2 lines on a 3-line display
|
|
//
|
|
#if LCD_HEIGHT >= 4
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Press Button", "to resume print"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_INIT = _UxGT(MSG_1_LINE("Parking..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Wait for", "filament change", "to start"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Insert filament", "and press button", "to continue"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Press button", "to heat nozzle"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nozzle heating", "Please wait..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Wait for", "filament unload"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Wait for", "filament load"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Wait for", "filament purge"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Click to finish", "filament purge"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Wait for print", "to resume..."));
|
|
#else
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Click to continue"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_INIT = _UxGT(MSG_1_LINE("Parking..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Please wait..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Insert and Click"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Click to heat"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Heating..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Ejecting..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Loading..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Purging..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Click to finish"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Resuming..."));
|
|
#endif
|
|
PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("TMC Drivers");
|
|
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("Driver Current");
|
|
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("Hybrid Threshold");
|
|
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("Sensorless Homing");
|
|
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("Stepping Mode");
|
|
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop Enabled");
|
|
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Reset");
|
|
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" in:");
|
|
PROGMEM Language_Str MSG_BACKLASH = _UxGT("Backlash");
|
|
PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A;
|
|
PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B;
|
|
PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C;
|
|
PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correction");
|
|
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing");
|
|
}
|