166 lines
8.4 KiB
C
166 lines
8.4 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Chinese
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_CN_H
|
|
#define LANGUAGE_CN_H
|
|
|
|
#define MAPPER_NON // For direct ascii codes
|
|
#define DISPLAY_CHARSET_ISO10646_CN
|
|
|
|
#define WELCOME_MSG "\xa4\xa5\xa6\xa7"
|
|
#define MSG_SD_INSERTED "\xa8\xa9\xaa\xab"
|
|
#define MSG_SD_REMOVED "\xa8\xa9\xac\xad"
|
|
#define MSG_MAIN "\xae\xaf\xb0"
|
|
#define MSG_AUTOSTART "\xb1\xb2\xb3\xb4"
|
|
#define MSG_DISABLE_STEPPERS "\xb5\xb6\xb7\xb8\xb9\xba"
|
|
#define MSG_AUTO_HOME "\xbb\xbc\xbd"
|
|
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
|
#define MSG_SET_HOME_OFFSETS "\xbe\xbf\xbb\xbc\xbd\xc0\xc1"
|
|
#define MSG_SET_ORIGIN "\xbe\xbf\xbc\xbd"
|
|
#define MSG_PREHEAT_PLA "\xc3\xc4 PLA"
|
|
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
|
|
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xc5\xc6"
|
|
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xc4\xc7"
|
|
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xbf"
|
|
#define MSG_PREHEAT_ABS "\xc3\xc4 ABS"
|
|
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
|
|
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6"
|
|
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6"
|
|
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xbf"
|
|
#define MSG_COOLDOWN "\xc8\xc9"
|
|
#define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3"
|
|
#define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6"
|
|
#define MSG_EXTRUDE "\xcc\xad"
|
|
#define MSG_RETRACT "\xbb\xcd"
|
|
#define MSG_MOVE_AXIS "\xc1\xb2\xce"
|
|
#define MSG_LEVEL_BED "\xcf\xe0\xc4\xc7"
|
|
#define MSG_MOVE_X "\xc1\xb2 X"
|
|
#define MSG_MOVE_Y "\xc1\xb2 Y"
|
|
#define MSG_MOVE_Z "\xc1\xb2 Z"
|
|
#define MSG_MOVE_E "\xcc\xad\xba"
|
|
#define MSG_MOVE_01MM "\xc1\xb2 0.1mm"
|
|
#define MSG_MOVE_1MM "\xc1\xb2 1mm"
|
|
#define MSG_MOVE_10MM "\xc1\xb2 10mm"
|
|
#define MSG_SPEED "\xd1\xd2"
|
|
#define MSG_NOZZLE "\xd3\xd4"
|
|
#define MSG_BED "\xc4\xc7"
|
|
#define MSG_FAN_SPEED "\xd5\xd6\xd1\xd2"
|
|
#define MSG_FLOW "\xcc\xad\xd1\xd2"
|
|
#define MSG_CONTROL "\xd8\xd9"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " \xda\xdb"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " \xda\xdc"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " \xdd\xde"
|
|
#define MSG_AUTOTEMP "\xb1\xb2\xd8\xc9"
|
|
#define MSG_ON "\xb3 " // intentional space to shift wide symbol to the left
|
|
#define MSG_OFF "\xb5 " // intentional space to shift wide symbol to the left
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Accel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_A_TRAVEL "A-travel"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_TEMPERATURE "\xc9\xd2"
|
|
#define MSG_MOTION "\xdf\xb2"
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
|
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Store memory"
|
|
#define MSG_LOAD_EPROM "Load memory"
|
|
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
|
|
#define MSG_REFRESH "Refresh"
|
|
#define MSG_WATCH "\xec\xed\xee\xef"
|
|
#define MSG_PREPARE "\xa4\xa5"
|
|
#define MSG_TUNE "\xcf\xf0"
|
|
#define MSG_PAUSE_PRINT "\xf1\xf2\xca\xf3"
|
|
#define MSG_RESUME_PRINT "\xf4\xf5\xca\xf3"
|
|
#define MSG_STOP_PRINT "\xf2\xf6\xca\xf3"
|
|
#define MSG_CARD_MENU "\xaf\xb0"
|
|
#define MSG_NO_CARD "\xf9\xa8"
|
|
#define MSG_DWELL "Sleep..."
|
|
#define MSG_USERWAIT "Wait for user..."
|
|
#define MSG_RESUMING "Resuming print"
|
|
#define MSG_PRINT_ABORTED "Print aborted"
|
|
#define MSG_NO_MOVE "No move."
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD card"
|
|
#define MSG_CNG_SDCARD "Change SD card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_YX_UNHOMED "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_HEATING_FAILED_LCD "Heating failed"
|
|
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
|
|
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
|
|
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
|
|
#define MSG_ERR_MINTEMP "Err: MINTEMP"
|
|
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
|
|
#define MSG_END_HOUR "hours"
|
|
#define MSG_END_MINUTE "minutes"
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU)
|
|
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
|
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
|
#endif // DELTA_CALIBRATION_MENU
|
|
|
|
#endif // LANGUAGE_CN_H
|
|
|